Web Conferencing on a Mac

I have scoured the documents, forums, etc. and cannot find a definitive answer. Is Web Conferencing on a MAC supported in the lastest version of OCS?
Thanks,
Catherine

I have an Macbook Pro (Intel) machine. I tried using it with Safari but it gives an error that the browser is not supported. It requires Netscape of IE. IE is not available or supported on X Tiger, so Netscape was the only option. There are many issues using Netscape with any Java Applet on Mac, so I decided to try Opera which works fine with most Java Applets because it has IE and Netscape emulation and comes with Java support built in. With Opera, the Applet starts to load then gives an error RCC something. Short answer, it seems Windows is a must.

Similar Messages

  • I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch.  All other components work normally.  In Activity monitor it says Adobe switchboard failed to respond.  Can anyone help solve this issue?

    I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch.  All other components work normally.  In Activity monitor it says Adobe switchboard failed to respond.  Can anyone help solve this issue?

    Release: 4/25/2012
    http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx

  • Application doesn't update in web conferencing

    I tried to share a graphics application, ProductView, in Web Conferencing. It worked at first, but the graphics portion does not update at the shared sites.
    This product probably uses Open/GL to display its graphics. Is there a limitation in Web Conferencing application sharing?
    David

    The problem was I forgot to include one of the .jar files in the .jnlp file. The application started but immediately finished because it couldn�t find the second jar. Java console has the same behavior and this is why I couldn�t see the message in the console.
    Thank you anyway!

  • Alert: [LYNC] 'Lync Server Web Conferencing' NT Service is not running.

    We keep getting this below Alert and everytime this happens, Conferencing would disconnect and connect back again.  Current setup as below. We are on latest CU November 2014.
    Server 2013 Pools - 2 pools
    Each Pool has 5 front end servers with 2 back end servers mirrored.
    Unable to find anything from best analyser,  Ports have been validated.  Any idea how to resolve this ?
    Alert: [LYNC] 'Lync Server Web Conferencing' NT Service is not running.
    Source: LS Data Conferencing Component [FE Server]
    Path: FE Server
    Last modified by: System
    Last modified time: 11/24/2014 9:41:23 AM Alert description: 'Lync Server Web Conferencing (RTCDATAMCU)' NT Service is not running. To restart the service, run 'net start RTCDATAMCU' from a command-line window.
    Whenever above alert is triggered, there is a corresponding application alert as below. 
    .Net runtime
    Application: DataMCUSvc.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an internal error in the .NET Runtime at IP 00007FFAC2A91020 (00007FFAC2A90000) with exit code 80131506.
    Application Error
    Faulting application name: DataMCUSvc.exe, version: 5.0.8308.0, time stamp: 0x5050e3de
    Faulting module name: clr.dll, version: 4.0.30319.34014, time stamp: 0x52e0b86c
    Exception code: 0xc0000005
    Fault offset: 0x0000000000001020
    Faulting process id: 0x303c
    Faulting application start time: 0x01d00621fefd0760
    Faulting application path: C:\Program Files\Microsoft Lync Server 2013\Web Conferencing\DataMCUSvc.exe
    Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
    Report Id: ca360fe4-73e7-11e4-80ca-001b21bfd144
    Faulting package full name: 
    Faulting package-relative application ID: 

    Hi,
    Did the issue also happen before updating to the latest CU?
    Please make sure you have installed the latest service pack for the Microsoft .NET Framework
    Please try to change part of Lync service to start as “Automatic (Delayed Start)”, restart FE Servers and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Transfer website from web to a new Mac.

    I created my website on my old Mac.  It is dead.
    I want to transfer my domain from the web to my new Mac and edit with IWeb. 
    Thanks!
    Carl

    Carl ~ iWeb can't import your published site from the web. iWeb can only open its key Domain file (containing your site data) usually located here:
    ...If you can't access that on your old Mac and you have no backup copy, you'll have to rebuild the site from scratch — paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
    http://iwebfaq.org/site/iWeb_Backup_retrieve.html

  • Problems with Java and Web conferencing

    I need to use a Web conferencing system that does not require a download. I tried using one that uses Java but several of my clients had problems because their JVM was not compatible or they did not have a JVM installed. Is there a Web conferencing system with no download that does not require Java?

    The GoMeetNow system has a mode they call Universal Attendance � there is no requirement of any download whatsoever. This will sure do the job for you.

  • Where do Aperture created web pages exist on .Mac?

    Where do Aperture created web pages exist on .Mac?
    After creating the web galleries I copy the link and view the page in Safari. Where do I see saved pages on .Mac?
    Thanks for any help.
    Dual 2.0 G5   Mac OS X (10.4.8)   17" PowerBook 1.67

    there's a lot of good info in the link referenced above...A simple answer to your question (IMO) is that the pages get created by Ap (look in your iDisk, a folder named "Sites")...now getting it referenced from "homepage.mac.com" is another (mystery) story. In the past two days, I've tried to get answers from .mac support and by the time they get around to looking into the situation (not being able to reference the pages from homepage), the problem is fixed and it works. I suspect there is some directory linkage built that happens during an overnight maintenance routine or something....but the bottom line for what I'm seeing is:
    1) web pages created outside of homepage (from Ap for example) are not immediately available through that server;
    2) they must be added through some other mechanism, but seem to be available the next day
    3) for someone with basic html knowlege, there is probably a way around this, but I wanted something reasonably easy to do...
    I hope this helps...it IS frustrating.
    cheers,
    david
    MP, PB12   Mac OS X (10.4.8)  

  • I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago but have repeatedly encountered problems with the programs freezing or not opening properly. It's a Student and Teacher Licensing version so an academic ID is required but I am

    I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago but have repeatedly encountered problems with the programs freezing or not opening properly. It's a Student and Teacher Licensing version so an academic ID is required but I am no longer a student--can I still reinstall it since my academic ID may no longer be valid?

    Erin Elzo as long as the serial number has been registered under your account at http://www.adobe.com/ then you should be able to continue to utilize the software.  You can find details on how to locate your registered serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • Why is Web Page Auth on MAC Filter Failure not working on Anchor Controller?

    Hi,
    I have implemented a Guest WLAN solution as per the recommended design from Cisco. We have two internal WiSM2 controllers providing services for Internal secure SSIDs. Both these controllers are members of a Mobility and RF management group.
    Two 5508 controllers have been installed in our DMZ for resilience and have been placed into a separate Mobility group. All controllers (internal and external) have been linked together as mobility neighbours in a full mesh and a new SSID for Web Guest traffic has been anchored to the controllers in the DMZ.
    Web page authentication works perfectly fine, but I cannot for the life of me get the MAC filtering override to work, i.e. if a MAC address is present, do not redirect to the splash page for web auth.
    I can get MAC auth working by iteself, but not with the Layer 3 option selected for web page auth on mac filter failure.
    I know I can get around this by just creating two separate SSIDs. But the business is used to just having the one SSID for all guest traffic.
    Is this a known limitation when anchoring SSIDs to controllers in the DMZ ?

    Hi Nicolas,
    I guess they changed their mind to add this fix in 7.0MR3. Now the fix will be in 7.2 release planned to be release in FEB.
    There is a documentation bug opened to add this to configuration guide :
    CSCtw48727    Document CSCts54424. Limitations webauth on mac filter fail for anchor
    Regards..Salil
    CSCtw48727    Document CSCts54424. Limitations  webauth on mac filter fail for anchor

  • How can i restore safari web browser on my mac book pro?

    how can i restore safari web browser on my mac book pro?

    Backup your system/data then start up holding down Command + R and select to reinstall your OS X. You have not mentioned which OS X you are using. If you have somehow deleted the Safari App for some reason, you need to reinstall the OS X to reinstall Safari properly. You should not lose any data, but if you do, then that is what the backup is for.
    Pete

  • I got CS6 Design & Web Premium on my mac, but now i also want it on my new macbook is it possible to use it also on my macbook? thanks!

    I got CS6 Design & Web Premium on my mac, but now i also want it on my new macbook is it possible to use it also on my macbook? thanks!

    yes, all adobe single user licenses allow up to two concurrent installations and activations.  if you need the installation file:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Visiting USA for 3 months. have 'adobe cs6 design and web premium' on my mac in australia.  Can i temporarily transfer it to my USA computer.  Im already in the US though?

    visiting USA for 3 months. have 'adobe cs6 design and web premium' on my mac in australia.  Can i temporarily transfer it to my USA computer.  Im already in the US though?

    That would be a new install and activation, and I do NOT know if your serial number will work in a different country
    Adobe contact information - http://helpx.adobe.com/contact.html may help

  • Web Conferencing

    A user receives the following error after clicking on the link "Web Conferences" on the OCS Portal Page: ... "Internal Error.: OID connection misconfigured or other error detected. Please notify the system administrator. Click Login Again to access the application or click Contact Us to inform us of the problem you are experiencing." ....
    However, if the user logs in using a different computer, he can login to the Web Conferencing application without any problems. The two computers that are involved in this scenario are set up identical, yet, one fails and the other is successful.
    Hope that someone can give me some idea of what I am overlooking in the set up of the failing computer.
    Thank you.
    New OCS Admin in Michigan.

    I suspect that the difference between the two computers is the network access. I think that the computer that is failing does not either have external (internet) or does not have direct access to the middle tier.
    The parameter ApacheGlobalWebHost in the imeeting server should have the main url for middle tier or Load Balancer. The ApacheWebhost should have the Middle tier url as this is the url that you are being redirected to. If the second computer does not have direct access to that server then you would encounter this issue.
    Also remember you have to have access to the infrastructure to be able to sign in and sso has to be setup properly to be able to access the imeeting application. This may be another cause of this issue.
    Try the url http://hostname:port/imtapp/app/prelogin.uix
    If you are still having a problem open a SR to Support and have them diagnose the issue.
    It is a place to start looking. ;)

  • Web Conferencing Using JTAPI - Need help

    Hi,
    I have to work on "Web Conferencing" application, but i don't have any idea how this can be done in Java.
    I heard that, JTAPI can be used for this purpose.
    Please tell me anyone, is it possible to do Conferencing type of application using JTAPI.
    If so what are the Requirements for that?
    Do we need to use any specific kind of telephone devices??+
    Give me some idea how to begin with this, and any source where i can get all the details about this.
    Thanks for any help.....
    Thanks,
    Sharath

    Take a look at the SIP servlet projects such as Sailfin if you want to deal with traditional PSTN.

  • Necessary ports for Web Conferencing in Oracle Collaboration Suite

    Hi everybody!
    What ports are necessary for opening to ensure the functioning with Web Conferencing in Oracle Collaboration Suite 10g (on a computer of the client and a server)
    Thanks a lot for your helps.

    Hi,
    If it's all configured properly on the server, you'll only need whatever port is configured for SSL on the middletier webserver (standard is 443) for actually running the conference - the web application used for scheduling etc. might use a different port but would usually be the same in a well configured environment.
    regards,
    Richard

Maybe you are looking for