Web console doesn't accept login

I am having some problem logging into the web console on one of my Solaris 10 8/07 machines. The web console is online, and showing no errors in any of it's (or the system's) log files. However, when I try to use the root username and password to log in, it tells me the password is not correct. The same root username and password work for logging in at the console. Has anyone seen this problem before?
I have patched the machine with all the latest patches available as of April 16th/08....uname -a shows 127112-11
This machine has N1 System Manager installed on it as well.
Thanks in advance,

It seems as if the console login is working fine. I can log in from both the console and via SSH as root. The problem I am having is that the Sun Java Web Console installed on this machine does not seem to be linked with system authentication ( I can't log in as root, though I can on my other Solaris 10 8/07 boxes ).
The Java Web Console is a standard part of Solaris installation (well, "Entire System" cluster, at least), and is accessed via https://localhost:6789/

Similar Messages

Solaris Management Console no longer accepts logins after running JASS...

I have an unusual problem... I have a Solaris 10 system (with the 2/16/2005 patches on it. I am able to use the Solaris Management Console (v2.1) with no issues to make my disk storage adjustments, etc etc.
The problem is when I run JASS with the secure.driver setup. After that, the Management console no longer accepts the root password to authenticate. So, I know that JASS tightened something up, but I can't figure out what it did. Worse, when I undo the JASS run, it doesn't undo whatever it did to the security of the Management Console.
Any idea where the Solaris Management Console gets it's security information (and configuration) from? And how I can undo whatever JASS did to it?
Again, I've reinstalled this test box 3 times, and I know it's the JASS step that's locking me out, and not the recommended & security patches.
Thanks to all!
-- M

As a followup - right after posting this message, I opened a support case for this, and the solution is that you need to go into /etc/security/policy.conf and backup JASS's change to the default encryption model.
Change CRYPT_DEFAULT=1 back to CRYPT_DEFAULT=__unix__
Then, you have to clear the password using "passwd -d", and then reset it again to what you want. Then, the management console will work.
I guess the management console is set to always use the __unix__ method, and not look at the policy.conf's setting. So when JASS wanders from the default, it breaks SMC.

Web console doesn't use 3rd party security cert

I set up a Mobility Service 2.1 server with a 3rd party public security cert.
The system authenticates through GroupWise 2014, set up via trusted app.
It works fine as far as mobile devices using the cert, but the Web console for the server does not use the same cert.
I've found nothing in the documentation outlining where the security cert for the web console is specified.
Anyone have any idea in what file this is defined?

gathagan wrote:
> I've found nothing in the documentation outlining where the security cert for
> the web console is specified. Anyone have any idea in what file this is
> defined?
Yep -
You can also use the same mobility.pem file that you created earlier for
securing the Web
Admin Console. To do so, do the following:
1. Change to /var/lib/datasync/webadmin on the Mobility Service.
2. Back up the existing server.pem file (cp server.pem server.bak)
3. Copy the mobility.pem file that you created earlier into
/var/lib/datasync/webadmin, and
name it server.pem.
4. Restart the Web Admin (rcdatasync-webadmin restart).
Danita
Novell Knowledge Partner
GroupWise Mobility Service 2.0 Guide - http://bit.ly/1cv13RE
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...
Are you a GroupWise Power Administrator? Join our site at
http://www.caledonia.net/register

Unable to login to Web console through xelsysadm.

Hi All,
I am unable to login to the web console through xelsysadm.It doesn't show any error message, but the process bar goes on for some time and then shows the session is expired. I have a delegated admin with 5 users.
The users present in this group are able to login with in second span of time.But Xelsysadm is unable to login.
Can any one help me on this.
Thanks in Advance.

Both the field has a value 0 in database. when I enter the credintials and submit it, the status bar goes on for a long time and its not enterning into web console.the login page appears for long period with status bar progressing and it even stay in that state for 24hrs with out logging in.
But wen I use delegate admin, he is able to login with in seconds of time.

Again Help me.When I try install Adobe Creative Suite 6 Design&Web Premium (education Edition) to my laptop it doesn't accept the serial number?

One year ago I install that Adobe Creative Suite 6 Design&Web Premium (education Edition) to my table desktop and it works fine,
but now I want install that to my laptop and I haven't installed it on any other but it doesn't accept the serial number?
What can I do? can I have another serial number? Or what?
sari

if you purchased from or registered with adobe, you may be able to retrieve your serial numbers by checking the account used to buy/register, Adobe ID
or if you have your disc box and documents, Find your serial number quickly
or if your cs6 is currently installed on a pc, Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

After downloading the latest version I have been asked to login with my password but it doesn´t accept it or a new one !

I updated my TB to the latest version and now when I open it up it asks me to login with my password but it doesn´t accept it.

http://kb.mozillazine.org/Password_rejected

ITunes doesn't accept Apple ID login

Dear All
the log-in for billing / account data in iTunes 11.1.4 doesn't accept my Apple ID. Password is correct and internet connection works well.
What seems bizarr is, that it accepts my ID / pass to login into iTunes Store (it also works for other Apple ID logins), but when I click on my account name in iTunes to see what I bought and other data, it doesn't accept the password. It just keeps repeating the pop-up the window/message, that it needs my login. Only if I use an incorrect passw, it shows up the red phrase saying the ID is wrong. But if I tell the correct passw it keeps repeating the normal message without red phrase.
Any ideas?
Thanks all in advance

I wish I had an answer for you, but I'm having the exact same problem. Current version of iTunes, correct Apple ID - repeating login request.
Any solutions out there?

Web site still says that Firefox doesn't accept cookies

Hi,
The web page mail.hitmessaging.net/ suddenly says that Firefox doesn't accept cookies so I followed all your instructions on this page
http://support.mozilla.com/en-US/kb/Websites%20say%20cookies%20are%20blocked
and restarted the browser and then the computer but the problem remains. I clicked OK after having changed the settings in "Tools"-"Privacy" exactly as you recommend (I have double-checked) but when I open that menu again the changed settings haven't been saved. The setting is still "Remember history" instead of "Use customer settings for history" no matter how many times I try to change the setting. I'm using the Swedish version of Firefox 6 and I didn't have this problem with any home page before upgrading to Firefox 6.
Best regards,
Claes Vestermark
Stockholm, Sweden

Please see the support article [[Preferences are not saved]]. The article provides several possible remedies.
Let us know how you get on.

Java Web Console CAM 6.7.0.12 - Unable to login

I've installed the CAM version 6.7.0.12 installation on a Redhat 5.5 system. The installation went smoothly and I'm able to hit the login page at https://localhost:6789.
I'm attempting to login with the system root account and am having no luck.
I see the following in the systems message log: Oracle Java(TM) Web Console[31794]: Authentication of user root failed
Thanks for any help

CAM 6.7.0 bug fixes. (Windows OS)
Status: RELEASEDPatch Id: 144861-01***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
For further information on patching best practices and resources, please
see the Big Admin Patching Center:
http://www.oracle.com/technetwork/systems/patches
***********************************************************************Summary: CAM 6.7.0 bug fixes.Date: Nov/16/2010Installation Requirements:Additional instructions may be listed belowSolaris Release: Note: Microsoft WindowsSun OS Release: Note: WindowsUnbundled Product: Sun StorageTek Common Array Mgr Firmware UpdatesUnbundled Release: 6.7.0Xref: Topic: Relevant Architecture: i386BugId's fixed with this patch:6968739 6972298
Changes incorporated in this version:6968739 6972298
Patches accumulated and obsoleted by this patch:
Patches which conflict with this patch:
Required Patches:
Obsoleted by:
Files Included in this Patch: Note:
sun-cam-scsi.msi
SUNWsefms.msi
SUNWstkcamcd.msi
SUNWstkcamui.msiProblem Description: 6968739 J4410 reporting incorrect chassis serial number.
6972298 Win2k8: Constant errors: libses Property (sun-expander-product-identification) is not defined
Revision History:
141581-01:
Initial Windows patch for CAM 6.7.0 containing Fishwrap 3.7.2-1 bug fixes.
Special Notes:
This patch supplies bug fixes for CAM 6.7.0 Typical 'Full Installation' or Custom
'Management Host' or 'Data Host Proxy Agent' installations. It is not intended to
be used or is it required for 'Administrator Host CLI Client' installations.
Linux RHEL SuSE CAM 6.7.0 Firmware Release for F5100 (LINUX OS)
Status: RELEASEDPatch Id: 145967-01***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
For further information on patching best practices and resources, please
see the Big Admin Patching Center:
http://www.oracle.com/technetwork/systems/patches
***********************************************************************Summary: Linux RHEL SuSE CAM 6.7.0 Firmware Release for F5100Date: Nov/17/2010Installation Requirements:Additional instructions may be listed belowSolaris Release: Note: Redhat SuSESun OS Release: Note: RHEL SuSEUnbundled Product: Sun StorageTek Common Array Mgr Firmware UpdatesUnbundled Release: 6.7.0Xref: Topic: Relevant Architecture: i386BugId's fixed with this patch:6961484 6969860
Changes incorporated in this version:6969860 6961484
Patches accumulated and obsoleted by this patch:
Patches which conflict with this patch:
Required Patches:
Obsoleted by:
Files Included in this Patch: Note:
sun-cam-fw-j4000-6.7.0-11.i386.rpmProblem Description: 6969860 LF1.0-ERIE: Win2k8 SP2 driver loses SCSI enclosure several times per second
6961484 LF1.0 Erie - Driver does not connect to devices after power-cycle
Revision History:
145967-01:
F5100 Firmware
SAS Expander:
sasxfwmo.5.04.05.fw

Unable to Login to Middleware (Web Console)

Hi all,
I am able to login to the back-end SAP-Gui as well as synchonise with MI client with the created User ID and password having all appropriate authorizations.
But unfortunately i am unable to login to the web console through this user ID and password, it gives the error message "User name or password incorrect".
Kindly help me out.
Regards,
Abhishek

Hi Nameeta,
Thanks for the reply.
I have already given authorisation for the transaction object S_TCODE.
The problem is now solved as i was giving wrong system name.
Thanks everybody.
Regards,
Abhishek

SAP web console auto login

We are beginning to implement SAP web console on SAP 4.7.
The RF guns are running Windows CE 4.2. Is it possible to get the RF guns to auto log into SAP web console?

Hi Chris,
Yes, this can be done by setting up the Parameter(Command Line Parameters) in your WebSAPConsole URL Login.Pl refer to the Appendix A section in the WebSAPConsole user guide.
OR refer to the thread below.
https://forums.sdn.sap.com/click.jspa?searchID=1288219&messageID=1147817
Message was edited by:
Sivakumar Ganesan(Gisk)

Sun AS 9.1 UR2 Admin console doesn't ask for login name and password

I have an instance of Sun AS 9.1 installed on Linux, that has broken admin console. The console never asks for login and password, just lets the user to do anything.
I didn't set it up and I've never seen that. There's Policy Agent installed because of some apps and maybe this is causing the problem. But I don't know. I just need to secure the console (anyhow).
Any ideas what could happen? Any hints where to look, what libs could be overwritten by bad version or something?

This is probably the only thread that relates to the problem i am facing.
I have encountered the same issue whereby the user ID shows up empty.
Accessing the console without having the need to enter credentials is causing me some serious security issues.
Martin777, have you found any ways to secure your console?
Thanks.

In Messages I'm getting "The recipient of this conversation doesn't accept file transfers." Does anyone know how to rectify this issue?

In Messages I'm getting "The recipient of this conversation doesn't accept file transfers." Does anyone know how to rectify this issue?

Hi,
I am reading your post that those are your specs.
Is that correct ?
How are they logged in ?
PDF link to the Snow Leopard server info
As you may know you have to set your server to Federate to other servers and may need to invoke the port 7777 for the Proxy65 File Transfer port to allow Server to Server File Transfers.
See this Flash based view of page 17
To clarify that:
The app can do App to App File Transfers (most Jabber apps use port 1080 for this).
It can be assisted by the Server port if required using the Proxy65 File Transfer item.
However the other end still needs to be logged in to an App rather than Web Login (Google, Facebook) and be an App that can do File Transfers.
7:39 pm Friday; June 20, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Why does it say "doesn't accept file transfers"?

when I try to send a file over ichat I keep getting the message that "ichat doesn't accept file transfers" What am I doing wrong?

HI,
It can depend on which Jabber server you are using and what has been enabled on that particular Server.
That's one possible.
Another is that the Applications at the other end is not set up to accept File Transfers, such as someone logged in to AIM Express in a web browser will have limited abilities.
Finally, AIM file transfers are on a different port and or internet protocol and this port (and or the Protocol) may not be allowed though your Mac settings in.
Lets start with the last.
AIM Logins in version up to and including version 5 are on port 5190 by default using the TCP Protocol.
We (The regular posters) have been suggesting using port 443 for this for a long time. Now iChat 6 and Messages in Mountain Lion actually use port 443.
File Transfers on on Port 5190 but use the UDP Protocol.
It always uses this and this cannot be changed.
In the Mac Firewall in some versions of the OS UDP traffic can be blocked.
Check the Advanced Button settings.
Of course the port has to be opened in the modem (if it routes) or your router.
In some cases such as the Port Forwarding method you can have models that specify Protocol as well as ports. Opneing it for 5190 and TCP can block it being opened for 5190 and UDP.
If you are using UPnP (Or Apple's Port Mapping Protocol) you should not have problems.
With the second option above you can pull down the Video Menu and open Connection Doctor.
This will tell you your Capabilities.
In a Buddy List highlight a Buddy.
Use the CMD and i keys together (Get Info)
The Capabilities tab in here will tell you whether the Buddy has the abilities to File Transfer.
The first option I suggested can only really be checked using a Third Party Jabber app such as Psi
Basically after you set up an Account in Psi you can access an option called Service Discovery that iChat (and Messages in Mountain Lion) does not do.
This will tell you if the server is set up for File Transfers or Group chats plus things called Transports.
With some servers you will need to (sub) register for the Services you also want to be active.
Using this method to view Google's GoogleTalk server tells you nothing about the Services they have active.
As you may have worked out you may need to check out the server's ability if you are using a Jabber servers even if the symptom looks more like reason two.
12:01 PM Saturday; December 1, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Sun Oner Application Server 7 Admin Console doesn't start

When I start the Admin Console for Sun One Application Server 7, and after I login, the admin console doesn't display in the browser. I have tried starting the admin console with IE and Netscape browser, but the admin console has failed to start in either IE or netscape.

-Type this in your IE
http://localhost:4848
-IF it does not work type the following
http://kishan:4848 ("kishan" is your machine name)
-IF it does not work do the following
Forgot the Admin Server Port Number? If you do not remember the HTTP server port number of the administrative server, you can inspect the administrative server's configuration file to determine the HTTP server port number.
1. Navigate to the <domain_config_dir>/domain1/admin-server/config/ directory.
2. Open the server.xml file in your favorite editor. Look for the element:
<http-listener id="http-listener-1" address="0.0.0.0" port="4848"...
In this case, port 4848 is the HTTP port number in use.
Forgot the Username or Password? If you do not remember the administrative user name that was supplied during installation, try the user name "admin". This is the default user name specified in the server configuration dialog during installation. If you still cannot determine the user name, look in the following file:
<domain_config_dir>/domain1/admin-server/config/admpw
This file contains the administrator's user name followed by the encrypted form of the administrative user's password.
If you do not remember the administrator's password, then you can delete the administrative domain using the delete-domain subcommand of asadmin and create a new domain with a new administrative password.
Port Not Accessible? If the connection was refused when attempting to contact the administrative server's admin console application, it is likely that the administrative server is not running. Go back to the beginning of this section and double check the your startup procedures and the content of the administrative server's log file to determine the reason why the server is not running.

Web console doesn't accept login

Similar Messages

Maybe you are looking for