Web Console

Hello,
Seem to be having some trouble with the web console on users computers.
I type the console link into my browser and hit enter. When it prompts me to configure or skip. I select configure.
Do You want to run or save SilverlightClientConfiguration.exe. I select run but after the security scan it says SilverlightClientConfiguration.exe was reported as unsafe
I run it any way and it says it was successfully configured on this computer so i select close but am still seeing the same configure/skip screen. I click skip and it starts loading the console. The left side however shows all the views that are available
to my account however when clicking on any of them i receive the following message in the right pane.
"The view cannot be displayed because this computer is not configured for the operations manager web console. Refresh the browser to configure"
Any suggestions?

Hello Yog Li, Similar but I don't know that it is the same. I tried adding those registry entries but still no luck.
A few things to note. The web console works fine from the MS, and running the silverlight plugin says it is installing successfully.
Update: I have tried re-installing the Web Console role but still have the same issue. If I use my account to log into the console from the MS it works fine. From my PC or any of our other users PC still a no go.
Any help on this would be appreciated
Update 2: Ended up uninstalling the web console again. Ran the prerequisites again using
Import-Module ServerManager
Add-WindowsFeature NET-Framework-Core,Web-WebServer,Web-Static-Content,Web-Default-Doc,Web-Dir-Browsing,Web-Http-Errors,Web-Asp-Net,Web-Http-Logging,Web-Request-Monitor,Web-Windows-Auth,Web-Filtering,Web-Stat-Compression,Web-Mgmt-Console,Web-Metabase
and
%WINDIR%\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -r
Both found on this page
http://www.opsmode.com/2011/07/web-console-prerequisites-opsmgr-2012-beta/
And now it seems to be working correctly

Similar Messages

How do I get the Web Console on top, in FireFox 21 Mac?

In Firefox 21, the Web Developer Web Console seems to be fixed to the bottom with no option to change it. In previous version of FF, there was an option to put it on the top of the window. The bottom is a bad place for the Web Console, especially for Mac users. For one, the status line is right above the command prompt when something is loading or I'm moused-over a link, so I can't type in the prompt. Also annoying as a Mac user, when I bring the mouse too close to the bottom of the window, to type in the console prompt, my dock pops up. Whenever I want to use the console prompt, I have to bring the window up an inch to keep my Mac OS dock from popping up.

I prefer relative inside positioning to a separate window getting in the way. You must assume that I already know what the Web Developer console is to basic extent; it's not a tip to point out an elaborate and separate option that is already known to all who are familiar with the console. Perhaps I didn't explain my problem correctly. I think I meant Web Developer Web Console "above" not "top", but yes "top" to CSS definition of top, including whatever it is called in GUI terms "above", but not like window above or top in layers.

How do I change the default certificate in Java Web Console?

I have a 3rd party issued server keystore & truststore ready to go in both jks and p12 file formats. I wish to use this in the Sun Java Web Console instead of the self signed certificate. I cannot find any documentation as to changing the certificate. I did find commands to change the keystore and truststore passwords, but I want to change the entire certificate.
I tried manually messing with the /var/webconsole/domains/console/conf/server.xml configuration file but realized it was more complex than that. Is there a documented procedure for changing the default certifcate?
Thanks

Siri will use the default calendar specified in the Mail, Contacts, Calendars setting.
Go to Settings/Mail,Contacts,Calendars, then scroll down, and change the default in the Calendars section to your the one you prefer.
hope this helps.

Web console is not restarting

Hello all,
I am facing problem in restarting the java webconsole service.
After disabling the java webconsole through "*smcwebserver stop*" command, I am unable to start the java webconsole.
root@imola2> smcwebserver start
Starting Sun Java(TM) Web Console Version 3.1 ...
Cannot determine if console service is running.
Check log file: /var/svc/log/system-webconsole:console.log
Run "svcs system/webconsole:console" to determine its status.
But when i checked the status,
root@imola2> svcs -a|grep webconsole
offline* 16:15:38 svc:/system/webconsole:console
Also when I checked the network status,
netstat -a|grep 6789
localhost.6789 localhost.33160 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33161 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33163 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33164 49152 0 49152 0 CLOSE_WAIT
*.6789 *.* 0 0 49152 0 LISTEN
localhost.6789 localhost.33441 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.32958 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33444 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33448 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33449 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33450 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33451 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33452 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33453 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33454 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33455 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33456 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33457 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33020 49152 0 49152 0 CLOSE_WAIT
localhost.34355 localhost.6789 0 0 49152 0 SYN_SENT
if i am not wrong ,
when I do netstat -a|grep 6789 , we should see following output right ? (please correct me if i am wrong )
*.6789 *.* 0 0 49152 0 LISTEN
Can any one help me out how to start the java webconsole ?
Edited by: nitin.k on Apr 17, 2009 2:25 PM
This web console problem is only noticed on the second machine in the Cluster.
On the first machine, Java web console is running fine and we don't see any multiple localhosts.port entries in the netstat output

Hello all,
I am facing problem in restarting the java webconsole service.
After disabling the java webconsole through "*smcwebserver stop*" command, I am unable to start the java webconsole.
root@imola2> smcwebserver start
Starting Sun Java(TM) Web Console Version 3.1 ...
Cannot determine if console service is running.
Check log file: /var/svc/log/system-webconsole:console.log
Run "svcs system/webconsole:console" to determine its status.
But when i checked the status,
root@imola2> svcs -a|grep webconsole
offline* 16:15:38 svc:/system/webconsole:console
Also when I checked the network status,
netstat -a|grep 6789
localhost.6789 localhost.33160 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33161 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33163 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33164 49152 0 49152 0 CLOSE_WAIT
*.6789 *.* 0 0 49152 0 LISTEN
localhost.6789 localhost.33441 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.32958 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33444 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33448 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33449 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33450 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33451 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33452 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33453 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33454 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33455 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33456 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33457 49152 0 49152 0 CLOSE_WAIT
localhost.6789 localhost.33020 49152 0 49152 0 CLOSE_WAIT
localhost.34355 localhost.6789 0 0 49152 0 SYN_SENT
if i am not wrong ,
when I do netstat -a|grep 6789 , we should see following output right ? (please correct me if i am wrong )
*.6789 *.* 0 0 49152 0 LISTEN
Can any one help me out how to start the java webconsole ?
Edited by: nitin.k on Apr 17, 2009 2:25 PM
This web console problem is only noticed on the second machine in the Cluster.
On the first machine, Java web console is running fine and we don't see any multiple localhosts.port entries in the netstat output

Web console: An unexpected error has occurred

Hi
When I try to open SCOM 2012 web console I get this error:
An unexpected error has occurred
<endgetresponse><beginonui></beginonui></endgetresponse>
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support : System.ServiceModel.CommunicationException: [HttpWebRequest_WebException_RemoteServer] Arguments: NotFound Debugging resource strings are
unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer --->
System.Net.WebException: [HttpWebRequest_WebException_RemoteServer] Arguments: NotFound Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer] Arguments: NotFound Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult) at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<endgetresponse>b__9(Object sendState) at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<beginonui>b__0(Object
sendState) --- End of inner exception stack trace --- at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state) at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult) at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult
result) --- End of inner exception stack trace --- at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result) at System.ServiceModel.ClientBase`1.ChannelBase`1.EndInvoke(String
methodName, Object[] args, IAsyncResult result) at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.DataAccessServiceClientChannel.EndExecute(IAsyncResult result) at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult
result) at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnEndExecute(IAsyncResult result) at System.ServiceModel.ClientBase`1.OnAsyncCallCompleted(IAsyncResult result)</beginonui></endgetresponse>
<endgetresponse><beginonui>Please assist.</beginonui></endgetresponse>
thanks
<endgetresponse><beginonui></beginonui></endgetresponse>

Hi,
Take a look at this article to fix this issue:
SCOM 2012 Web Console HttpWebRequest_WebException_RemoteServer
http://www.bictt.com/blogs/bictt.php/2012/05/06/scom-2012-web-console-httpwebrequest_webexception_remoteserver
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem in Oracle Identity Manager 9.1.0 Web Console

Hi,
I did OIM Upgradation from OIM 9.0.3.1 to 9.1.0.
The Upgradation is completed.
In upgraded version(OIM910)of Web Console,i have some new options in Resource Management and Deployment Management.
When i click those options,it shows "Page cannot Found" error.
Can u please tell me,where this pages will exists or do i need some other customizations to get these things.
Please help me to resolve it.
Thanks,
Saranya.

Well what is the error which you get while doing Trusted Recon. If its some connection error then confirm that you have required connection jar files placed in the ThirdParty folder of OIM.
I am not very sure but I thing these would be the jar files required:
Oracle 8i - classes12.jar
Oracle 10g - ojdbc.jar
so make sure you have right jar files.
Thanks
Sunny

In web console Attestation menu item not showing,after OIM 9.1.0.1 install

In web console Attestationmenu item not showing,after OIM 9.1.0.1 installation
Version: 9.1.0.1860.16
Build 1860.16
thanks.

Choose option Oracle Identity Manager with Audit and Compliance Module during installation.
INIYA.

Steps to extend the schema if I have no access to the web console

Hello,
I am usin DS 6.2. The web console is not applicable in my case. So I must extend the schema manually.
I want to add an attribute type and an objectclass. I do have a test server and I did
ldapsearch -L -b "cn=schema" objectclass='*'
and then took what I need:
dn: cn=schema
changetype: add
attributeTypes: ( 1.3.6.1.4.1.42.2.27.9.1.333 NAME 'orclnetdescstring' SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 X-ORIGIN 'user defined' )
objectClasses: ( orclservice-oid NAME 'orclservice' SUP top STRUCTURAL MUST cn MAY orclnetdescstring X-ORIGIN 'user defined' )
When I do:
ldapadd -c -h hostname -p 389 -D "cn=Directory manager" -w password -f myldif
adding new entry cn=schema
ldap_add: Object class violation
I tried to add these lines
attributeTypes: ( 1.3.6.1.4.1.42.2.27.9.1.333 NAME 'orclnetdescstring' SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 X-ORIGIN 'user defined' )
objectClasses: ( orclservice-oid NAME 'orclservice' SUP top STRUCTURAL MUST cn MAY orclnetdescstring X-ORIGIN 'user defined' )
to 99users.ldif and restarted the server. No progress.
any idea please?

You can either use 2 "changetype:modify" operations (not changetype:add since you're trying to modify an existing entry), or you can stop you DS, then edit the 99user.ldif by hand and start it again .

How do i monitor all my website status hosted on IIS using web console

How do i monitor all my website status hosted on IIS using web console
I need to monitor all the website status if that is started or stopped on the server remotely something like
Website name Port #
Server name (website hosted on)
Status (Stopped/ Started)
Please help
Thanks in advance

This one may help.
http://gallery.technet.microsoft.com/scriptcenter/Powershell-Script-for-13a551b3
I'd ask them more over here.
http://forums.iis.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Web console doesn't accept login

I am having some problem logging into the web console on one of my Solaris 10 8/07 machines. The web console is online, and showing no errors in any of it's (or the system's) log files. However, when I try to use the root username and password to log in, it tells me the password is not correct. The same root username and password work for logging in at the console. Has anyone seen this problem before?
I have patched the machine with all the latest patches available as of April 16th/08....uname -a shows 127112-11
This machine has N1 System Manager installed on it as well.
Thanks in advance,

It seems as if the console login is working fine. I can log in from both the console and via SSH as root. The problem I am having is that the Sun Java Web Console installed on this machine does not seem to be linked with system authentication ( I can't log in as root, though I can on my other Solaris 10 8/07 boxes ).
The Java Web Console is a standard part of Solaris installation (well, "Entire System" cluster, at least), and is accessed via https://localhost:6789/

Error in Web Console After UR4

After installing UR4 I now get the following error when opening the web console:
After updating to UR4   know get:
Server Error in '/OperationsManager' Application.
Could not load file or assembly 'Microsoft.EnterpriseManagement.Presentation.Core.Server' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
              Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it
originated in the code.
Exception Details: System.IO.FileLoadException: Could not load file or assembly 'Microsoft.EnterpriseManagement.Presentation.Core.Server' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Microsoft.EnterpriseManagement.Presentation.Core.Server' could not be loaded.
I am running on windows 2012r2 and sql 2012 both fully up to date on patches and service packs
Not sure if it helped or made it worse but I have tried:
Removing and then adding back the ASP.net IIS features
Did a repair on the web console feature then uninstalled and reinstalled the web console as well.

SOLVED:
Deleted temp files in: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files
IIS reset --- all worked after That.

Web console report error

Hi,
I have this error when I try to run my report thru web console report, and it just happen when I click on the report only. No parameter was selected when I click on the report.
"Parameter validation failed. It is not possible to provide valid values for all parameters. (rsParameterError)"
Regards,
Chungb

Hi Garth,
It's actually all built in report that have the same error message. I saw it from some forum, suppose I need to select the parameter after I open the report, but it straight give me the error without any selection.
Regards,
Chungb

Open the Web Console when a pop-up opens

Suppose I am working with a webpage and I have the console open.
Then, I click in an element, and the javascript code that handles the event decides to open a new window.
That window does not have the console open, so I miss some details of the http traffic, etc.
What I am doing now is to hit Ctrl+Shift+K as fast as I can, or use Fiddler.
But there must be a setting somewhere where I can say "Always open the console when a new window is open", Right?
I googled a bit, but I couldn't not find an answer.

Hi bcartolo,
Not a problem. You can open the Web Console by first going to Tools > Web Developer Tools > Web Console
Then try [https://addons.mozilla.org/en-US/firefox/addon/firegestures/ Firegestures] to customize this.

Web console, "Connection to R/3 Broken"

Hello all,
I've installed Web Console on IIS, Win2k3 server, and I'm unable to connect to my ERP system.
The message displayed reads, "connection to r/3 broken" in plain text.
I've seen a couple of threads here and there, but none post a resolution.
Some background:
I'm reasonably sure I've included everything, I need to. I've allowed ALL Unknown ISAPI Extensions, made an entry for my system.
Also, it seems note 910901is no longer in service. Let's see if Klaus posts about that note

Well, I put in the resolution for one of my systems in the post directly above yours.
The entry was missing in the SAP Login Pad on the host. I have a 2nd server set up identical to the first, and this did not resolve the error there.
Seems theres a couple of common fixes.
1) Make sure you are allowing all api extensions on the host
=>Start=>programs=>IIS Administrator=>allow all extensions
2) Make sure your sap gateway parameters are set high enough to allow all traffice. The default is 200. If you're experiencing sporadic problems, this might be it. Often, in other threads like this, people have mentioned that rebooting fixes their issues. This would fix it w/o having to reboot.
3) Make sure the SAPGUI is populated with all the systems you're attempting to connect with >on the host<.
That's all I have I'm afraid.

N1 system manager installation faied (newer version of Java web console)

Hi,
I am trying to install Sun N1 system manager on Solaris x86 U3 + all patches. Once I run the installer I got:
N1SM Installer (version 1.3.2 on SunOS)
1. Install OS packages. [Completed]
2. Install Expect. [Completed]
3. Install IPMI tool. [Completed]
4. Install JDK 1.5. [Completed]
5. Install service provisioning components. [Completed]
6. Install OS provisioning components. [Completed]
7. Copy DHCP configuration file. [Completed]
8. Install user interface components. [Partially Run]
9. Install service container components. [Not Completed]
10. Install N1 System Manager. [Not Completed]
Failed Step: Install user interface components.
The following is a portion of the installer
log which may indicate the cause of the error.
If this does not indicate the cause of the
error, you will need to view the full log
file. More information on how to do that is
available below.
The Sun Java(TM) Web Console software already installed (version 3.0.2)
is newer than the version (3.0) you are attempting to install.
Downgrading is not supported. If you wish to run the older version,
you can install it after unintalling the currently installed version.
Error running lockhart setup: 1792
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.9327.
t. Try this step again (correct the failure before proceeding)
x. Exit
Enter selection: (t/x) x
Is there any way to continue my installation and using currently installed version of Java Web Console?

Tried removing the currently installed Java Web Console as described at http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l4?a=view
It says to simply run /usr/share/webconsole/bin/setup -u, however there is no setup binary in the listed dir.
# ls -l /usr/share/webconsole/bin/
total 396
-r-xr-xr-x 1 root sys 9995 Oct 9 08:18 smcwebserver
-r-xr-xr-x 1 root sys 6571 Oct 9 08:17 smloginmodule
-r-xr-xr-x 1 root sys 171907 Oct 9 08:17 smreg
-r-xr-xr-x 1 root sys 1456 Oct 9 08:17 smwebapp
-r-xr-xr-x 1 root sys 2917 Oct 9 08:17 wcadmin
# uname -a
SunOS host 5.10 Generic_118855-33 i86pc i386 i86pc
It seems the docs are wrong?

Web console doesn't use 3rd party security cert

I set up a Mobility Service 2.1 server with a 3rd party public security cert.
The system authenticates through GroupWise 2014, set up via trusted app.
It works fine as far as mobile devices using the cert, but the Web console for the server does not use the same cert.
I've found nothing in the documentation outlining where the security cert for the web console is specified.
Anyone have any idea in what file this is defined?

gathagan wrote:
> I've found nothing in the documentation outlining where the security cert for
> the web console is specified. Anyone have any idea in what file this is
> defined?
Yep -
You can also use the same mobility.pem file that you created earlier for
securing the Web
Admin Console. To do so, do the following:
1. Change to /var/lib/datasync/webadmin on the Mobility Service.
2. Back up the existing server.pem file (cp server.pem server.bak)
3. Copy the mobility.pem file that you created earlier into
/var/lib/datasync/webadmin, and
name it server.pem.
4. Restart the Web Admin (rcdatasync-webadmin restart).
Danita
Novell Knowledge Partner
GroupWise Mobility Service 2.0 Guide - http://bit.ly/1cv13RE
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...
Are you a GroupWise Power Administrator? Join our site at
http://www.caledonia.net/register

Web Console

Similar Messages

Maybe you are looking for