Web content parent page URL
This URL would point to a parent page and would be used for navigation. Similar to the request for a home page URL, this attribute would be selectable and have an entry field for the relative path to the parent page.
A typical use case.
Photographs from an event with multiple activities are uploaded to a hosting site using LR2. Banquet photos go to /event/banquet. Golf outing photos go to /event/golf. Awards photos go to /event/awards. In each case, the Parent Page attribute is checked and the entry field is populated with "/event".
After the content is uploaded from LR2, the user exits LRs and uploads index.html to /event that provides navigation to each of the activity pages.
To be consistent, the entry field should be populated with the relative path and the name of the landing page file (i.e. /event/index.html).
Similar Messages
-
It would be slick if there were a Home Page URL attribute that could be set when uploading content. A checkbox to include or not. An entry field to include the relative path to home.
Forgot the use case.
A typical use case.
Photographs from multiple activities are uploaded to a hosting site using LR2.
Football photos go to /myschoolhomepage/photos/football.
Prom photos go to /myschoolhomepage/photos/outandabout.
Graduation photos go to /myschoolhomepage/photos/at_last.
In each case, the Home Page attribute is checked and the entry field is populated with "/myschoolhomepage/index.html".
Each time new content is uploaded from LR2, the site administrator updates /myschoolhomepage/index.html to include navigation to the new content. -
Hi guys,
Here is the idea of this:
https://forums.adobe.com/thread/1712927#7217892
Thanks.Don't now if it's the recommended way, but we're doing this with the context-param elements of the web.xml file.
Example :
<web-app>
<display-name>MyWebApp</display-name>
<description>
A sample Web Application
</description>
<context-param>
<param-name>driver</param-name>
<param-value>org.postgresql.Driver</param-value>
</context-param>
<context-param>
<param-name>url</param-name>
<param-value>jdbc:postgresql://mydbhost/mydbname</param-value>
</context-param>
<context-param>
<param-name>user</param-name>
<param-value>dummy</param-value>
</context-param>
<context-param>
<param-name>password</param-name>
<param-value>garbled</param-value>
</context-param>
<session-config>
<session-timeout>60</session-timeout>
</session-config>
</web-app>
In our Web application, we read those values in the following way :
public class MySVCImpl implements ServiceLifecycle, MySVCIF {
public void init(Object context) {
ServletEndpointContext seContext = (ServletEndpointContext) context;
ServletContext sContext = seContext.getServletContext();
String driver=sContext.getInitParameter("driver");
String url=sContext.getInitParameter("url");
String user=sContext.getInitParameter("user"),
String password=sContext.getInitParameter("password"),
Hope this helps.
Mark -
Hi,
i received an indesign file to include in a folio that had links to the creators desktop where they had the assets for the web content overlay. When i try to update the folio i get the error message:
"Content generation error.
[Error: Invalid URL for Web Content Overlay]"
Which is fair enough.
The problem is, i have gone through and changed all URLs that I can see, but there is one somewhere, that I just can't find.
Is there a way to get a list of all web content overlays in a particular file? otherwise i will need to recreate the whole page again, and it has some pretty complex interactions which i rather wouldn't do.
I also cannot ask the original doc creator to just change the links as i'm sure he'll have the same issues as me, at not being able to track down the erroneous link.
The problem I have with DPS is that its not very transparent. you'll have to click on everything, and into every group to see what actions are on it, which can be extremely time consuming and frustrating when complex interactions are included.
thanks in advance for any assistanceI’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down. -
Invalid Url for Web Content Overlay
I am constantly getting this error when I try to upload a page with a web content overlay -- i even get thi smessage if i try to upload http://google.com.
sgThis link is likely being redirected, and redirects aren't allowed in Web Content overlays. For example, http://www.google.com will work, but http://google.com won't. Check the URL on a mobile device. A lot of sites get redirected to the mobile version: http://twitter.com becomes http://mobile.twitter.com.
-
Invalid URL for Web Content Overlay. Help?
I am doing a french tranlation to an existing folio app that someone else created.
There is one page in my folio that is comprised of garbage and a trash can. You touch the garbage and drag it into the trash, and things change, etc.
I have an index.html file and a bunch of other images.
I can't even successfully add the article to my folio, I get this warning: Content Generator Error. Invalid URL for Web Content Overlay.
Can you walk me through how to get this to work?
Attached is a screen shot of my file structure...When you specify the .html file, all the content in that folder is uploaded automatically. Here's an article about Web Content overlays:
http://help.adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c73657495129f66e490f-7f fa.html
And here's an article and video about HTML articles:
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60530cf39c12f5fcd6d46-80 00.html -
Anonymous access to the WPC pages of the Web Content repository
During setting up access of anonymous user to Web Page Composer pages we need to use Web Content repository that is not in the Documents repository.
As is in the note 837898 there are no prefixes for WPC pages in the URL Generator Service.
So the an anonymous user get login screen then attempt to access any WPC pages of the Web Content repository.
How to achieve that content in the Web Content repository get as Content Link property the value '/irj/go/km/docs/wpccontent/u2026', rather than '/irj/servlet/prt/prtroot/...'?Hi Vladimir
Did you try the following from the note:
2. Open the PCD Editor as Content Administrator: Content Administration > Portal Content > Portal Content > Portal Users > Standard Portal Users > Standard User Role > Open > Object
a) Navigate to Home (note the tooltip "com.sap.km. home_ws") > Hidden > URL Access.
b) Open contained iView: Document (km-doc-iview) for editing
c) Select the property category "Advanced"
d) Change the property "Authentication Scheme" to "anonymous"
e) Save the changes.
I think that ought to fix your problems.
Else go see this note 1237530 as it describes that there has been some mis-coding internally in WPC with relation to using /irj/go/km/docs instead of standard servlet.
Best regards,
Martin Søgaard -
Set Portal Page URL in Web Dynpro IFrame
Hi All,
I've a Web Dynpro application that runs in the portal.
The application creates iframes dynamically.
I want to set in the iframes portal pages.
In order to get the page's url, I go to content admin, navigate to the page and then press the 'preview' button then I copy the url from the browser's address bar.
I copy the url from the '/irj....' to the src property of the IFrame UI element.
So the source property looks something like this:
/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.mycomp.Omri!2fcom.mycomp.TestPage
When I run the project I get:
<i>Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object: portal_content/.../...).
Exception id: 06:01_17/10/06_0015_4401150
See the details for the exception ID in the log file</i>
The page's permissions are set to everyone so I don't know why do I get this error.
So, how do I set portal page url in Web Dynpro IFrame?
p.s
I tried to use NavigatinTarget in the URL and it works. The problem is that the TLN is included. I want to display only the page.
Thanks,
OmriHi Valery,
I have only one domain...
I searched SDN and I found this post:
/message/1259616#1259616 [original link is broken]
Daniel Wroblewski from SAP says:
<i>This, naturally, sounds like a permission issue. Two steps:
You must give the Everyone group end-user permission to the iView. This will eliminate the error and cause a login screen to display.
If you want to eliminate the login screen, you must set the iView property Authentication Scheme to anonymous.</i>
I will try it tomorrow in the Office.
Omri -
Content generation error: invalid url for web content overlay
Hi,
I am having an error message " content generation error: invalid url for web content overlay" when I want to upload the article.
I don't have any link with that article and this is my 1st time having this kind of error. I am using indesign CC
Please help.
Thanks,
Rush OI’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down. -
Invalid URL for Web Content Overlay, ERROR!!!!!!
Hello All,
I'm hoping someone can help me with this error, I was working on my indesign file and was testing it out locally, then I went on to upload my file and I got prompt to install a new version of the Folio panel which I did, now every time I try to upload my file I get this "ERROR: Invalid URL for Web Content Overlay", I've searched around and have not come up with an answer. Not sure if its a bug on the new update or what. I tried some troubleshooting which this is what i did. I copied my first page of my document onto a different file and tried to upload one page and then i got the error but then I deleted the images and just left one text box and it uploaded my file without any issues, strange huh. Any ideas????I was having the same problem with both hyperlinks and buttons in one particular file -- "Invalid URL for Web Content Overlay." It seems to only be a problem in files where I had a link or button previously, and then deleted the object. When I create a new object and create a link or button, it's as though the old link is still lingering somewhere in the file! However, none of the old links is listed in the hyperlinks panel before I create a new one.
This occurred while I was teaching a DPS class, using the Adobe courseware (sight unseen by any proofreader, I believe). In one of the exercise files, the steps for the student to create hyperlinks and buttons had already been done, so I deleted the hyperlinks. (I think I deleted the text frames that contained them, but I'm not sure.) I never had a problem with it UNTIL I downloaded the Overlay Creator/Folio Builder dated June 19 (v21, I think).
In the same file, I also had problems with a NAVTO link, . I don't think there were any NAVTO links in any earlier version of the file, at least none that I ever created or deleted.
I've coded HTML since the days when the only available tool was Notepad, so I'm sure that I used correct URLs (and none redirected). Even the URLs in the deleted objects were correct; I only deleted them so the exercise could be done again. -
MP4 Video throwing error: Invalid URL for Web Content Overlay
Converted a 15 second flv video to the following using Handbrake:
mp4
H.264 codec
"Placed" mp4 file into my article
Set Autoplay= On and 0.125s delay
Try to preview via InDesign a get the error: Invalid URL for Web Content Overlay
Try to update my article via Folio Builder and I get the same error.It seems that you "placed" your video into the frame selected as Web Content in Folio Overlays Panel.
Delete that frame.
Place (in the normal InDesign way, not"place") your mp4 file onto the page.
Adjust the size of the frame to your video measurements.
Look at the Folio Overlays Panel. Your placed file should appear ther as Video Overlay.
Set your options and you are done. -
Resize Content Editor Web Part to Page Width
I have a content editor web part in page. The CEWP contains a javascript based menu and an Iframe.
The problem is that when I resize the page, the width of the CEWP does not size to the width of the browser.
How can I get the CEWP to resize to the browser?John BailoJohn, can you provide insight on the script you used for this? I'm trying to accomplish the same thing.
-
How to create a link to web page (URL) to a billing document
Hi,
I have an urgent requirement of creating a link to web page (URL) to a billing document.
I call the function module "GOS_EXECUTE_SERVICE" with :
ip_service = 'URL_CREA'
is_object-objkey = no billing document
is_object-objtype = 'VBRK'
is_object-logsys = 'BO'
ip_rwmode = 'E'
Then, I enter the title and the address.
And, I have the message : "The attachment was successfully created".
But when there's nothing in the attachment list of the billing document.
(Tha table SOOD contains the record )
If any one has some idea about his , how to achieve this functionality, can you please help me.
Thanks
Virginie
geoge bush
Posts: 6
Questions: 0
Points: 6
Registered: 7/9/04
Re: Attaching a file to a purchase Order from EP6 to R/3 4.6C
Posted: Jul 13, 2004 2:46 AM Reply E-mail this post
Hi Somaraju,
I am also looking for A CODE EXAMPLE TO ATTACH A DOCUMENT TO A AN sap OBJECT E.G. BUS222 AND ISUACCOUNT.
IF YOU'VE AN Example code that you can email me . it would be great.
thanks for the help.
geoge.Hey,
If you are using Portal (not Framework), the below tag will do the trick
<wcdc:userProfile id="profileUserLink" immediate="false" text="#{security.userDisplayName}" shortDesc="#{security.userDisplayName}" xmlns:wcdc="http://xmlns.oracle.com/webcenter/spaces/taglib"/>
-K -
URLs to specific articles in Web Content Viewer
I'm placing the Web Content Viewer on a custom site for free viewing of all articles in the folio. Is it possible to get a URL of individual articles that be links sent to people? So if there is an email blast, can there be a URL that will lead a reader to a certain article in that online folio? Thanks.
Is this the reason (under "Known issues with social sharing / web viewer)? Digital Publishing Suite Help | DPS Bug Fix Release Notes
I'm not using V32 on this folio. -
Autoplay on page load doesn't work in Web content overlays
I would like an audio file to play in a web content overlay and can't manage to make it play automatically when page loads. Because of different complications I can use neither the html-stack nor the audio overlay in Indesign. When I test the html file used in the web content overlay in safari on my computer it works but not inside the app.
I have also set the frame with the web content in indesign to "autoplay" in the overlay creator. This makes the audioplayer in the web content overlay visible on the page, but you still have to push the play button to start the music.
Has anybody had the same problem and solved it?Apple does not allow autoplay within HTML, to avoid high data costs. There
might be a workaround using javascript, but you need to search for it.
—Johannes
Maybe you are looking for
-
Re: How to avoid APPS password displayed in Unix box .
Hi How to avoid APPS password displayed in Unix box by using ps command for concurrent program with execution method set as "host" . Regards .
-
RE: where can I maintain Vendor Article number
HI, In SD, I can maintained the customer article number. In MM, where can I maintain the vendor article number. There is a field in Purchase info record. Beside here, where else can I set it up? Thanks Bye
-
Subnet vs VLAN, L2 broadcast and L3 broadcast
Hi all, I understand what are subnets and VLANs in which subnet breakup a network into different smaller segment, whereas VLAN is the logical breaking of a physical switch into several logical ones. By right, each subnet and VLAN belongs to its own b
-
Convert MS Reporting Services Reports to WebI
Does any one know a tool to convert reports
-
Error determining planning periods for calendar
Hello SAP Guru's We are receiving the above error when trying to go into MD04 for a particular material. we have checked the forecast agains the planning calendar and the dates in the forecast and demand planning are approximately 2 years less than