Web Crystal Report not working after period of time

Hi
I have had a problem for a long time now on one of our web servers, it's becoming more of an issue lately due to a web site using Crystal more. The problem is that the Crystal Report Viewer does not load after a few hours. If I re ship the main DLL into the Bin folder for the site, then something gets 'reset', and hey presto, Crystal starts working again.
The problem would even arise with a basic CR, with just one Textfield on it (i.e. not show)
Web server is 32 bit Windows Server Web Edition SP 2. Asp.Net project built in VS 2012 against .Net 4.0.
Anyone have any ideas?
Many thanks,
Julian

Make sure you are on SP 8
Make sure you are using .Close and .Dispose on your report objects as you get done with them.
What OS? (2003, 2008, 2012)
Provide more info on the following:
The problem is that the Crystal Report Viewer does not load after a few hours.
What does that mean? Errors? Warnings? Behavior? Symptoms?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Similar Messages

Crystal report not shown after application idle time

i have a web page which uses around 10 session variables to store values on a button click.and after assign session values Response.Redirect("~/url",false); to a a page which contains crystal report viewer.and report should show those session values.after keeping the application idle for 45 mins i click on the button which assign session values.then it's redirecting to the report page but the report is not shown.it shows a empty page and no errors shown(only happens application is idle for nearly 45 mins other wise works fine)
i'm using iis 7
in the web.config i have set sessionState timeout="60" and application pool idle time out to 60 mins.
any idea why this happens

Make sure you are on SP 8
Make sure you are using .Close and .Dispose on your report objects as you get done with them.
What OS? (2003, 2008, 2012)
Provide more info on the following:
The problem is that the Crystal Report Viewer does not load after a few hours.
What does that mean? Errors? Warnings? Behavior? Symptoms?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal Report not working in JAR File

I am using Eclipse All in one, which includes the Crystal Report... I Finished every thing and the Crystal Report is working in Eclipse.. But its not working in JAR files.. Anybody suggest me WHICH FILES SHOULD BE SET AS CLASSPATHS FOR CREATING THIS JAR FILE...
Thanks in advance

Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

Content query web part is not working after chaning the DNS entry

Hi all,
We have a content query web part in the sharepoint site but it is not working after changing the DNS Entry for the web site ipaddress from one server to other . But it is working fine on the server, if we try to access the site from other system content
quey server its not working fine and its giving error message as bellow.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

I have custom XSLT . But it is working fine before changing the dns entry as soon as we change the DNS entry the content quey web part is not working. I tried to delete the content query web part and add it once again to the page, As soon as content query
web part is added to the page the fallowing error message is displayed.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

Crystal report not working when setup is made in VS 2010

Hi, i am new to SAP Business objetcts as well as in this forum.
I have made an application in VS 2010 (C# /WPF) and made its .exe file too.
The Crystal reports are working fine when i am running from Visual Studio.
But it gives error message while i am running the .exe.
I have made the .exe as normally we do.
Please help me out.
Regards.

Adam assumed you were using Enterprise as the thread was posted to the ".NET - SAP BusinessObjects Enterprise, SAP BusinessObjects Edge, SAP Crystal Reports Server" forum.
Since you are using WPF viewer, I'm pretty sure this is not the case.
I am not sure how you are loading the report, so a code snippet from your app will help. Also, in your code as a test, hard code the path to the report. Does that work?
Looking at the [WPF|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/a09f7025-0629-2d10-d7ae-df006a51d1a8] demo is going to be worthwhile also.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Display more pictures in crystal report not work why

Hi guys i try to show picture of specified employee from network path in crystal report it work
but i don't know how to show all pictures to all employees in crystal report
Can any one help me to customize my code to accept show all employee pictures
i try to make this from crystal report and assign path but version of crystal report not allow to me
to put path
my code below show picture to one employee from text box control from network path
I need to customize this code to accept show more one pictures of employees from employee table
the following fields i show in report
EmployeeNo integer
EmployeeName nvarchar(50)
Image datatype image
btnemployeeno_click
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoR", con);
cmd.CommandType = CommandType.StoredProcedure; // Viewxxx doesn't seem a good name for a sp
cmd.Parameters.Add("@EmployeeNo", SqlDbType.NVarChar, 20);
cmd.Parameters["@EmployeeNo"].Value = textBox1.Text;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
string path = Path.Combine("\\\\192.168.1.105\\Personal Pictures", textBox1.Text) + ".jpg";
FileStream fs=null;
if (File.Exists(path))
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + textBox1.Text + ".jpg", FileMode.Open);
else
MessageBox.Show("Please File Not Exist");
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
foreach (DataRow dr in dt.Rows)
dr["Image"] = imgbyte;
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();

Hi,
Put an image field in your report, then change the image’s Graphic Location:
right click the image, select Format Graphic, select Picture tab, click the conditional-formula button that look like a x2 and set the formula’s text to
the name of the formula or parameter field that will contain the image’s URL.
Save the formula and click the OK button. Save the report and test it.
Be carefull with the size of the image field. If this size is not equal to the image itself it could get resized.
Good Tutorial
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Crystal Report not works in JAR File

I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
"com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
ReportViewer.jar
jrcerom.jar
Concurrent.jar
CrystalCharting.jar
CrystalCommon.jar
CrystalContentModels.jar
CrystalExporters.jar
CrystalExportingBase.jar
CrystalFormulas.jar
CrystalQueryEngine.jar
CrystalReportEngine.jar
CrystalReportingCommon.jar
icu4j.jar
keycodeDecoder.jar
log4j.jar
MetafileRenderer.jar
rasapp.jar
rascore.jar
rpoifs.jar
Serialization.jar
URIUtil.jar
xercesImpl.jar
xml-apis.jar
and the mysql-connector jar file
Anybody help me please...

Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

Reports not working after upgrade to SCCM 2012 R2 -

I am having the same issue described in this post:
http://social.technet.microsoft.com/Forums/en-US/30f185ac-c34e-44ad-87eb-7d180a0d76b8/after-2012-r2-upgrade-some-sql-queries-wont-run?forum=configmanagergeneral
When running reports after upgrading from SCCM 2012 SP1 CU2 to SCCM 2012 R2 I get the following error:
An
error has occurred during report processing. (rsProcessingAborted)
Cannot
read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Conversion
failed when converting the nvarchar value
'S-1-5-21-1010966800-777871707-395339515-124623' to data type int.
I have removed the Reporting Services Point and reinstalled it with no effect. All reports I try get the error listed above.
Any suggestions?

The issue has been resolved. For anyone experiencing a similar issue I will post the fix that worked for us below:
I ended up opening a PSS case and in this instance the problem was the required SQL management provider was not properly registered in WMI, which ultimately meant the reporting point upgrade/install was not able to complete successfully after the upgrade.
As a result the updated reports were not properly being redeployed to the Reporting Service Point.
To diagnose this on the Reporting Service Point look in the srsrp.log for entries indicating of an
Invalid Class, as seen in the example below:
Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Could not retrieve the reporting service name for instance 'RPSERVER' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Could not stop the reporting service '' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Next security configuration at [11/6/2013 5:52:12 PM] SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Root Folder exists SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Successfully checked that the SRS web service is healthy on server SERVERRP.AD.DOMAIN SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
SRSRP registry key change notification triggered. SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Timed Out... SMS_SRS_REPORTING_POINT 11/6/2013 5:48:13 PM 6096 (0x17D0)
The important part is the lines saying Invalid Class and then it timing out, so the RP installation was not completed.
As mentioned earlier the WMI class that was missing or corrupt was the SQL management Provider. To re-register the class we need to compile the MOF file that is available in SQL. In our instance the command to run was:
mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
Once that was done, monitoring the srsrp.log shows that it could properly detect the SSRS service, stop it and start coping the updated reports and such. After a few minutes the deploy completed, and all the broken reports started working
correctly.
Hope that helps someone else.

CSS with crystal reports not working

We have typed the CSS Class Name property of a text object. We have used the Publishing wizard to publish the cascading style sheet on the reports server. Still it does not work. I have searched the web for answers and the only answer I got was from a forum that said Crystal Reports does not fully support css. All I want to do is apply css to the reports we have developed in Crystal Reports Developer XI R2, and then publish the reports on Crystal Reports Server XI using the publishing wizard and then view them with InfoView. Can anyone give my a straight forward way of doing this? Thanks,Peter Mead 

Hi Peter, I do not believe (although documentation is scarce as you have found out) you can use style sheets if you are using InfoView. I was able to use them by including them in our custom JSP pages using the LINK tag (we are printing reports using RAS). However, that's not applicable if you plan on using InfoView.For the record though, you cannot really use style sheets if you are using conditional formatting. If you use CSS to control things like font, color, alignment, basic look-and-feel stuff, and your reports are also using conditional formatting values, then any value that triggers the conditional formatting will lose the CSS Class Name, and will look very out of place on the report with the rest of the values in the column. In those cases, you basically have to hard code the font type, font size, alignment, etc into the conditional formatting rule, which completely invalidates the point of using CSS. If you ever want to change FONT-FAMILY from Times New Roman to Arial then you have to change it in the CSS (which is very easy) and then also in every single report that uses conditional formatting (which is very lame). At that point, you're better off just using a template. Does anyone from Business Objects have any suggestions? I think for CSS to be useful you basically need not only to have the ability to conditionally format, but you also need a checkbox for every possible attribute for "overwrite CSS." If the CSS says FONT-COLOR = black but the conditional format says to make all negative values red, you should be able to say "I want negative values red but I want the font and the alignment to match the rest of the report, so use whatever the CSS says." Anyway, I hope your experience is better than mine. Definitely reply if you figure out a good way to use style sheets.

Crystal reports not working in windows 7 but working fine on XP

I have a VB .net 2005 windows app. It has been working on Windows XP (32-bit) environment for a while and now we are moving to Windows 7 (64-bit). The program runs fine except for the reports which was written using the crystal report built in with VB .net
2005. I get an error Database login and it asks for user ID and password. HELP PLEASE !!!!
I am using the following connection string:
DBconn.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & str_data & ";Persist Security
Info=true;user ID=Admin;Jet OLEDB:Database Password= mypassword"
And on the REPORT form I have the following code
Private Sub frmExportDiv_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim crReportDocument As CrySelectedDivisionSummary
crReportDocument = New CrySelectedDivisionSummary
Dim ss As String = Application.StartupPath()
Dim logOnInfo As New CrystalDecisions.Shared.TableLogOnInfo
logOnInfo.ConnectionInfo.ServerName = ss & "\\Firm_data.mdb"
logOnInfo.ConnectionInfo.Password = "mypassword"
logOnInfo.ConnectionInfo.UserID = "Admin"
crReportDocument.Database.Tables("qryExportDiv").ApplyLogOnInfo(logOnInfo)
cryprintandexport.ReportSource = crReportDocument
End Sub

Hi vbmaayah,
CR is not supported anymore by MSFT. Here is the official support forum:
http://scn.sap.com/community/crystal-reports/
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal report not working on 64 bit machine

Hello friends,
Hope everyone is doing good. I have an issue and you all are requested to help me out.
I have build an Application using VS 2008, i used Oracle 10g as database and Crystal report 2008 for reports. The Application and reports are working fine when i deploy it on 32 bit machine, but when I deploy it on a 64 bit machine, my Application works fine but reports are not displayed, when ever i run report it ask Db credential with the following message
"The report you requested requires further information."
then Server, user ID and password filed, I off course supplied credential but no results.
For resolving the issue i installed VS 2008 on 64 bit machine with redist CR Viewer and tried to verify database for the report thinking this might be an issue, but in CR designer it gives me following error when i tried to verify database or create new connection using OLEDB provider for Oracle
Crystal Reports ActiveX Designer
Logon failed.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for Oracle
Description: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
OK
I tried the following fixes as well:
- Installed CR viewer for 64 bit machine
- Registering ORAOLEDB10.dll
- Reinstalling VS 2008
The Application works fine but Crystal reports are malfunctioning. Please help!!!!!!!!!!!!!!!
Thanks a ton in Advance
Happing coding and resolving issues
Danish Mustafa Khan

Also, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Web UI does not work after deployment of BBPCRM SP for CRM 7

Hello!
I just applied SP 2 for BBPCRM in our CRM 7 system and after that our web ui does not start correctly.
We can log in and choose a business role, but the we get the following error in the browser
Service cannot be reached
What has happened?
URL http://host.intranet.org:8061/sap_!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"__html__head__title_Logon Error Message_/title__META http-equiv="Content-Type" content="text/html/css"_body { font-family:tahoma,helvetica,sans-serif call was terminated because the corresponding service is not available.
Note
The termination occurred in system CRD with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:K-i:host_CRD_61-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
It does not make any entries in the system log, but I found the following in the ICM log
Thu Mar 12 07:51:02 2009
*** ERROR => URLDecode recognised invalid sign in form field [ictxxfilt.c 248]
*** ERROR => illegal request {00030882} [http_auth.c 494]
Address Offset REQUEST:
Has anbody else encountered this error and how did you solve it?
I'm not really sure it is related to the BBPCRM package, it could be related to SAP WEBCUIF 700 package that had to be applied before BBPCRM SP 2.
Regards
rollo

Hello!
I just solved it!
I found that the SAP/webcuif services was disabled, if it was the SP that caused it or not, I don't know, but when I enabled it everything started to work!
Regards
rollo

Visual composer report not working after change backend function ?

We already suffered from strange behaviour of visual composer reports totally not functioning at all at some times.
now I made a change in a function which is called in a function that is used by visual composer. after transporting the change the VC report is not working anymore (while the function itself in the backend is working fine)
how comes that the VC report is not working anymore after inside changes of the functions it calls ??
kind regards
arthur

As you have made changes to the function those changes wont be reflected to the VC.so you try to re call the function into VC then it will work fine.

Web Crystal Report not working after period of time

Similar Messages

Maybe you are looking for