Web Disparcher 7.41 patch 43 standalone redirect not working

Hello,
I was hopping to find a solution posted here. I am using standalone web Dispaterchers pointing to two NW 7.40 backend systems. SAP Web Dispatcher with a 7.41 patch 43 version.
w05adm 55> sapwebdisp -v
SAP Web Dispatcher Version 7.41.0, multithreaded, ASCII, 64 BIT
kernel information
system name          =
kernel release       = 741
kernel make variant = 741_REL
DBMS client library =
compiled on          = Linux GNU SLES-11 x86_64 cc4.3.4
compiled for         = 64 BIT
compilation mode     = Non-Unicode
compile time         = Jul 11 2014 23:31:22
update level         = 0
patch number         = 43
source id            = 0.043
Profile files in the attachment. Trace:
WebSocketPlugInInit: WebSocket Plugin initialized
[Thr 47418910971664] IcmAddHiddenService: Hidden service WEBSOCKET started
[Thr 47418910971664] Started service HOST=WDhost.com,PORT=8100,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 47418910971664] Started service HOST=localhost,PORT=8100,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 47418761521920] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 0
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 1
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 2
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 3
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 4
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 5
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 6
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 7
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 8
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 9
[Thr 47418910971664] IcmWatchDogThread: watchdog started
[Thr 47418918024976] Fri Aug 8 18:12:06 2014
[Thr 47418918024976] *** ERROR => IcrAttachToServer('!DIAG') failed 4 [icrxx.c      4011]
[Thr 47418918024976] *** ERROR => IcrAttachToServer('!DIAG') failed 4 [icrxx.c      4011]
[Thr 47418918024976] *** ERROR => IcrAttachToServer('!DIAG') failed 4 [icrxx.c      4011]
[Thr 47418918024976] *** ERROR => IcrAttachToServer('!DIAG') failed 4 [icrxx.c      4011]
When I was open http://WDhost.com:8100/host1/sap/bc/gui/sap/its/webgui?sap-client=001 or http://WDhost.com:8100/host2/sap/bc/gui/sap/its/webgui?sap-client=001
Service cannot be reached
What has happened?
URL call was terminated because the corresponding service is not available.
Note
The termination occurred in system with error code 404 and for the reason Not found.
What can I do?Please select a valid URL.
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
I tried to update the kernel patch level, but it did not help. I create logon group in my ABAP system.

Your rules are wrong, if you want to match "/" you have to escape it meaning "\/". That said, you should rather have a DNS alias for each system in order to keep the setup lean.
Edit: once you have the rule working, you will still either have to configure hostX in the backend as a virtual host or have other rules removing it from the URL. That said I don't think you need that level of complexity, better have distinct DNS aliases then there is no need for that complexity.

Similar Messages

Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

Hello,
I currently have windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions
For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM.
As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.
Using an RDP client( v8.1) I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs
and I can use the device without any issues.
However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client) but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
Because I have ran all updates the rdp version on the VM is running v8.1.
Previous to installing the updates USBr still was not working
I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM :
RDP 8.0 -- Enabled
Configure RFX -- Enabled
Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
Many Thanks
Brian

Hi,
According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
Server6: Conversion is not supported in restricted language mode or a Data section.
Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
By the way, from Technet:
You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
Client Access Permissions
http://technet.microsoft.com/en-us/library/dd638131.aspx
Feel free to contact me if there is any problem.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)

SWindows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)% Greetings,
Today I ugraded to Windows 7 Ultimate 64 bit edition and am having a problem with my 5. surround sound that previously worked perfectly in Windows Vista Ultimate.
I am using an X-Fi XtremeGamer PCIe card and the problem is that I have full working surround sound, but the bass/ subwoofer isn't working.
Previously in Vista I enabled bass redirection in the Creative Console and this would make the subwoofer work. In Windows 7 in the console there is a bass redirection option but it doesn't work. Also in the Creative Audio Control panel there is NO option for bass redirection either.
Audio sounds tinny and I am 99.9% everything is set up correctley, I think this is a driver problem. At this moment I'm unsure if this issue plagues both the 32bit and 64bit versions of Windows 7 or just the 64bit version (since the console launcher is 32bit).
Anyone had a similar problem and cracked it's Apart from this small glitch Windows 7 is great!
Thanks!

WRe: Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)h heya, I have exactly the same problem.
running 64-bit windows 7, X-Fi Xtreme Audio sound card, Trust 5. speakers.
the bass used to work in XP because I could enable bass redirection and alter crossover frequency.
these options are now no longer available in the windows 7 drivers (.4.90) and my bass is not working at all.
it is very annoying, there has been no comment from creative than i can find because it only appears to happen to a small percentage of speakers.
basically if someone from creative can't help fix the problem,?people with this problem?will unfortunately be forced to purchase a different brand of sound card because my speakers certainly aren't broken and work with the on-board sound fine.
so if anyone else has the same problem or any advice on how to fix the problem, please comment.

TS2167 My pages do not come up when I try to visit them in the web browser - ie the top page links do not work.

My pages do not come up when I try to visit them in the web browser - ie the top page links do not work.
How do I reconnect the links to their relevant pages again (I use iWeb)

The background photo is on top of the links. Select it and move it to the back or add the background image via the Inspector/Page/Layout pane in the Page Background section.
OT

Webi report part(include Opendoc Link) ondesktop did not work in BI Widgets

My customer followed <BI Widgets User Guide>(XI3.1) to create a webi report part(include Opendoc Link) onto desktop.
Page 26:
To convert Report Part into a Widget ,drag and drop the Report Part from the Web Intelligence Viewer onto the desktop.
As a widget, the Report Part will include the following BI Widgets features:
- Automatic refresh
- User controlled size and positioning
- Saved display and data context state
- Optional setting as the top application window
- Full XI R3 security
- Web Intelligence opendoc links to detailed reports.
But it can not be clicked(hyperlink did not work).
My customer follow the SAP Note 1244968 to create again, it still can not be clicked.
For I can't reproduce this issue, could you tell me what's it probably related to?
SAP Note 1244968:
Symptom
Trying to use Hyperlinks in a BI Widget created from a WebIntelligence
report
Environment
XIR3
Workflow
1. Login in Webintelligence
2. Create on efashion a Webintelligence report with the
objects:Year,Sales Revenue
3. In the Edit panel add a column to the table and insert the
variable :=If([State]="DC"; HTMLEncode("http://uk.yahoo.com"); "")
4. In the Properties Display/Display/Read cell content as Hyperlink
5. Run the report and save it
6. Open the Webintelligence report with HTML view and click on the
hyperlink you are redirected to the Yahoo website
7. Log in BI Widget
8. Right click on the right inside icon of BI Widget and click on
Document List Explorer
9. Find the Webintelligence report and double click on it
10. Click on the table and drag and drop it to your desktop
11. The BI Widget gets created
12. Click on the column containing the Hyperlink:nothing happens.
Cause
There is no functionality of using Hyperlinks in a BI Widget created
from a Webintelligence report
Resolution
Enhancement Request ADAPT01119581 has been created
Environment details:
Srerver Environment: OS Version: RedHatEnterpriseLinuxES4.0 update5
Client Environment: OS Version: WindowsXP
Browser: IE6
JRE Version: 1.6.003_
Web & Application Server: Tomcat 5.5.20
Database character: AL32UTF8, JA16SJIS
Connection: native, ODBC, OLEDB
NLS LANG: Japanese Japan.JA16SJIS

Hi Soniya,
These are the steps:
1. Log in into infoview
2. Change the preferences (Click in the Preference button in the main tool bar), in the WebIntelligence section change the Select a default view format: to Interactive.
3. Click OK
4. Open the report where you want to add the hyperlink
5. Right click in the column or cell to add the hyperlink
6. Click Hypelink > New
7. You will see the Create Hypelink window, click Browse the select which report do you want to link
8. Fill in the parameter, prompts, etc.
and that's it, hope it's clear now. If you have any question let me know.

ISE posture redirect not working

ISE v1.1.0.665, 3395 h/w.
Single Admin/Monitor/Policy node.
WS-C3560-48TS 12.2(55)SE5 C3560-IPBASEK9-M
For Client Provisioning I created an authorisation policy as follows:
download acl "ACL-POSTURE-REMEDIATION"
apply url redirect "ACL-POSTURE-REDIRECT".
"Debug radius" shows all this is downloaded to the switch but:
- Redirect does not work.
- dACL is not applied if the URL redirect is also configured.
Wireshark on the client shows no direct.
Attached file shows "debug radius" for various combinations of authorisation policy i.e. dACL only, Redirect only, dACL + Redirect.
I've also attached screen shots of these policies and wireshark.

Grant,
It looks like you are changing the vlan after your client gets an ip address, it seems like the client gets an ip address of
192.168.16.164 and you are changing the vlan over to 516. I wanted to know if that is there isnt an ip to vlan mismatch before you move forward. If 516 is quarantine vlan you may want to start all clients on that vlan and use dynamic vlan assignment through change of authorization once a client becomes compliant. The reason is is that you can use the web portal, or the nac agent to change the ip address once the vlan is changed.
Thanks,
Tarik Admani

Response.Redirect not working after printing CR

Using Visual Studio 2010 sp1 with Crystal for VS 2010. Web app running as a web application in x86 mode using .NET 4.0 framework.
I recently created a CR with a sub-report and it previews and prints just fine. However, after I PRINT the report, my code behind in the ASPX file is not recognized and thus fails.
For example, I created a 'Back' button to redirect the CR aspx back to the calling aspx file and it works just fine if I only view the report. If I click on the printer icon located on the report viewer toolbar, the button stops working. In fact, none of the code behind syntax is recognized and the aspx file just does a page_load.
I know this code works because it does work if I DON"T print the report:
    protected void btnBack_Click(object sender, EventArgs e)
        Response.Redirect("~/NewCase.aspx");
I also have a 'Submit' button that changes the data parameters for the report and it works great but after I print the report, it will not work either.   (I've tried to upgrade to sp2 but I get an error with the installation process... so still trying to figure that out.)
    protected void btnSubmit_Click(object sender, EventArgs e)
        CrystalReportViewer1.RefreshReport();
To summarize, All the code I listed works fine if I do not try to print the report and just view it. After I click the printer icon, the code stops being recognized and the aspx page just refreshes.
I've searched for help on the web for a couple of days to no avail; so I am thinking it must be some issue with the report viewer.
Any help would be greatly appreciated.
Paul

Not a problem. Something like what is described in the following should help (from the easiest to the more complicated):
[1411677 - Blank first page in Visual Studio .NET application using the Crystal Reports DHTML viewer|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433313331333633373337%7D.do]
[1625033 - Page navigation button does not work as required using Crystal Report .NET web application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633323335333033333333%7D.do]
[1670041 - How to persist Crystal Reports using Cache in a custom .NET web application?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633373330333033343331%7D.do]
- Ludek

Immediate login, custom redirect not working correctly

I have a page with some conditional regions on it: show if user is logged in, else show something else. That sort of thing.
This page is a tease to convince users to register so there a prominent "If you're a member, log in here, if not register for free."
If someone clicks the Register button, they are taken to the registration page along with a url variable to identify the place they've just come from.
The registration page has an Immediate Login trigger on it - which has always worked without a hitch.
The registration page also has some conditional redirect triggers attached to the registration insert. The conditional redirect triggers GET the url variable being passed and if the condition is matched, the registration page sends them back where they came from - just like a login function would - registered and now logged in due to the immediate login trigger.
This has all worked wonderfully until this past weekend when the whole system fell apart.
For reasons unknown, the immediate login has stopped working. The redirect continues to work but people are correctly returned to the page with the logged in/logged out conditional regions but doing so without getting logged in, so of course they see the same stuff they just saw - stuff telling them to register or login.
Immediate login continues from every other direction, just this particular set of redirections seems to totally wonk out the person returning from the registration page properly logged in.
Anyone with any experience with this kind of thing? It's very essential to the way my web operation works.
I deeply appreciate any interest or advice.

Nope. This is the strangest thing I've encountered.
After changing the conditional trigger to AFTER, it worked once. I logged out to test again. Now it's right back to not working. Shut down the browser too.
As before, the redirect works as it's supposed to but the user gets redirected without being logged in.

WCCP redirect not working on Cat 3560

We have a 3560 running 12.2(37)SE1, IP services image.
Through debug, we can see WCCP communication betweeen the 3560 and our content engine (for web caching).
However, web traffic isn't being redirected to the CE at all. Instead, it goes straight out to the Internet.
Does anyone have the same issue? Has anyone got their 3560 to work w/ their WCCP products (web caching or WAAS)?

The 3560 does not support GRE redirection (layer3), so you need to use layer 2 redirection on your Content Engine for your 3560 to work fine with WCCP, also you need to use mask assignment since hash is non-supported as well.
Check this link:
http://www.cisco.com/en/US/products/hw/switches/ps5528/products_configuration_guide_chapter09186a008081db5b.html#wp1051427
Hope it helps!!

SSL redirect not working?

Hi,
have anyone been able to get SSL redirect working in ical and address book server?
In Apple documentation it says "redirecting ssl access redirects request for the http port and sends them to the https port". But it does not seems to work. Connecting to https port is working.
Bernt
Message was edited by: kenguru

Regarding the redirect, I don't really understand why it's not possible. You can edit the non-SSL website in Web and add a 301 for /Wiki to redirect to https://myserver.com/wiki. In fact you can redirect the entire site to SSL - but that is problematic. I can understand why Mavericks server would be designed to automatically use SSL for wiki logins, if it's available. I only looked at redirects because this was not working. Without a redirect or with a redirect - I can login to Wiki via non-SSL or SSL. Where (specifically in which text file) are these redirects created using Server Admin written to? I can't find them in apache2/httpd.conf. Thanks again for your help.

Response.Redirect not working with parameters

Response.Redirect("http://myurl/php/test.php?username=" + LoginHelper.userName + "&password=" + LoginHelper.password);
Hi All,
I am trying to redirect the user to different website with username and password. I am using the code above and passing user name and password as parameters.
This works fine on IE when i run the code on my local machine.
But when I push the code live this does not work, and user is not able to login.
It is working fine on other browsers.
Can someone please help, i am trying to wrap my head around this.
Any help would be much appreciated. Thanks in advance.

Hi SA260884,
Do you use Response.Redirect function in a asp web application? If yes, please check this sample:
https://support.microsoft.com/en-us/kb/307903?wa=wsignin1.0
If not, please make a sample html for reproducing this issue.
Best regards,
Shu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Phone layout redirect not working - built and hosted on Muse

Hi,
I just added a tablet and phone layout to my Muse built desktop layout. The redirect works fine for the tablet but the desktop version comes up on my smartphone (Android Moto X). The webpage is http://www.elegantperfection.com/ I am hosting with Adobe so I just hit Publish - I do not use Publish to FTP. The settings in site properties are set to redirect; not sure if there is another step but it seems to work fine for the tablet. Any ideas as to why the redirect is not working? Thanks!

Hi
I see you have published the site to Business catalyst, in this case, could you please try to Re-publish the complete site again and check if that helps?

NAC L2-IP on 6500 . URL Redirection Not working

Hi,
We are testing NAC L2-IP on a Cat 6506 running 12.2(18)SXF9.
When configuring for NAC L2-IP, the switch is able to download the required ACL
entries. The HTTP Server is enabled in the Switch, however still the HTTP
redirection is Not working.
From the Client side, I can see the SYN packets going to port 80 but no
response (Redirect etc) comes back from the switch.
This is the Port-ACL
10 permit udp any eq 21862 any
11 permit icmp any any echo-reply
20 permit udp any any eq bootps
30 permit udp any any eq domain
40 permit tcp any eq 3389 any
50 deny ip any any
This is the ACL as specified in the "url-redirect-acl" attribute
70 deny tcp any host 10.140.4.116 eq www
80 deny tcp any host 10.140.4.202 eq www
90 deny tcp any host 10.1.194.15 eq www
100 deny tcp any host 172.25.1.15 eq www
110 permit tcp any any eq www
Any ideas ?
+++++++++++++++++
show eou ip 10.192.99.27
Address : 10.192.99.27
MAC Address : 0006.5ba0.5705
Interface : FastEthernet2/47
AuthType : CLIENTLESS
Audit Session ID : 0000002C1387D1FB0000000D0AC0631B
PostureToken : -------
Age(min) : 15
URL Redirect : http://x.x.x/y
URL Redirect ACL : redirect-policy
ACL Name : #ACSACL#-IP-NAC_NoCTA_ACL-464b3186
User Name : UNKNOWN USER
Revalidation Period : 36000 Seconds
Status Query Period : 300 Seconds
Current State : CLIENTLESS
++++++++++++++++++++++++++++++++
Exactly the Same configuration and Secure ACS configuration works for a 3560 Switch.
Thanks,
Naman

Check this bug-id: CSCse02269.

Mozilla-redirect not working for me

I've used the mozilla redirect successfully in NS4 servers, but can't get my SunOne6.1 server to work with same line.
Should the same line work?
NameTrans fn="mozilla-redirect" from="/anything" url="/clickinstantly/index.html"

Found my problem. I nneded to move my mozilla-redirects ABOVE "document-root" and BELOW the "pfx2dir". Once I did that, the redirects starting working. And, sorry about the version umber. It is 6.0 ....Dave
NameTrans fn="pfx2dir" from="/mc-icons" dir="/u3/iplanet/servers/ns-icons" name="es-internal"
NameTrans fn="mozilla-redirect" from="/CLICKINSTANTLY/" url="http://www.polaroid/clickinstantly"
NameTrans fn="mozilla-redirect" from="/dbm" url="/landing/landing.jsp?FOLDER<>folder_id=2534374302023715"
NameTrans fn="mozilla-redirect" from="/us/index.jsp" url="/index.jsp"
NameTrans fn="document-root" root="$docroot"

.htaccess redirect not working

I have created a .htaccess file with the following code.
"RedirectMatch permanent ^/index.html$ http://www.caymanvacation.com/index.cfm"
It is in the domains root folder with the files it is redirecting and it doesn't work.
Any advice on how to det a redirect to work.
Dual G5 Xserve Mac OS X (10.3.9)

For a start, .htaccess files are disabled by default. You'll need to add/edit the <Directory> directive for the directory in question to AllowOverride FileInfo in order to use RedirectMatch.
However, it isn't clear that you need to do this.
If all you're trying to do is make 'index.cfm' the default document instead of /index.html, you can do this using the DirectoryIndex command. This tells apache the filename to use as the default document. Setting (or adding) index.cfm to this list will automatically serve that page if the user omits it.
If you do still want to use redirects (maybe because you have existing links/bookmarks to index.html) then you don't need to use RedirectMatch.
Since RedirectMatch uses regular expression parsing to match the URI there is a certain overhead in using it. You can get the exact same result with less overhead using a regular Redirect:
Redirect /index.html http://www.caymanvacation.com/index.cfm
This lightweight version will have the exact same effect but with lower overhead since it doesn't use regular expression parsing, just simple string matching.

Web Disparcher 7.41 patch 43 standalone redirect not working

Similar Messages

Maybe you are looking for