WEB DMS Error uploading file / create DIR

Hi SapGurus,
I have a problem creating new documents using WEB DMS, i remember trying to do it some time ago, and i could manually create the documents through WEB-DMS Create option choosing the configured document type,
but right now iam not able to upload any original file and create a NEW DIR, as it gives me an error message "an Error occurred while loading file" please suggest me what may be wrong with this now.
Also can we maintain standard SAP Object links while creating the DIR through WEBDMS, as iam not able to find the SAP Object link Tab / field while creating the DIR In WEB DMS,
(FYI, in the find documents we could find the document based on the SAP Object link Reference,) so i think there is an option to maintain SAP Object link details for the DIR getting created.
Thanks and regards
Priya S

Hi Priya,
please note that in WebDocuments only the existing object links are displayed. Therefore not all maintained objects are visible but only those where links exists.
There are certain selected data sections in WebDocuments that are shown in display mode or in change mode. The following sections can only be displayed and not changed
- Data for Document key
- Data for Object Links
The following sections can be changed in WebDocuments
- Document Data
- Additional Data
- Originals
- Description
Hence when a Document Info Record is created or changed, the object links data are not shown. It is shown only in search and display mode. This is the way system is designed. You can look at the application help for more information on the web documents. Also kindly note that WebDocuments is not the complete replica of SAP GUI CV01n, CV02n or CV03n. It has some limitations when compared to SAP GUI transactions. So as no new links could be created in WebDocuments not all available objects are displayed.
I hope this information could be useful regarding the object link behavior in WebDMS.
Best regards,
Christoph

Similar Messages

Adobe Muse won't publish (Error uploading file)

After making simple animations using Adobe Edge Animate it seems as though none of the assets will publish with my site after importing them into Muse.
In Edge animate I saved for "web animation" and published. Then I went to muse and hit "place". I went to preview and everything works fine. When I go to publish there are always errors in uploading my assets with '.png' extensions.
Any help is much appreciated. I have completely scrapped my website and created another, reinstalled Animate and have renamed all my files, I'm not sure whats wrong here.
I got one animation working, and that can be seen here under the Photography section, but I have multiples that will be shown on my page at one time.
http://chasebodydesign.businesscatalyst.com

I get the error uploading file everytime I try publishing the animation.

Error Uploading Files - One or more files could not be uploaded

Hi, I used Adobe SendNow without any problems for years. Since the migration to Adobe Acrobat, I don't think I have once managed to successfully send any files. Each time I get the message: Error Uploading Files - One or more files could not be uploaded. Please try again. If someone could help that would be great or else I will need to subscribe to alternative file sharing service that actually uploads files. I previously filed a Case Request looking for assistance, and within 2 seconds I received an automated response: "With this response, we believe your issue is resolved and have therefore closed your case 0186251803" !!!

Hi,
Those sizes (and numbers and numbers of files) shouldn't present any problem, but obviously something is amiss.
If you wouldn't mind trying to upload via the Files tab, and then sending from there, that would help us to diagnose. To upload your files, simply sign in and click on the Files tab. You might want to make a folder to hold the files you are going to send. To do this, click on the folder with the + sign. Then open that folder and click on the cloud with the arrow.
(The other way to upload files is to simply drag and drop them.) If you have trouble uploading many files at once (you shouldn't!), try one at a time. Again, I am interested to know what method, if any, works for you.
Now that you have your files uploaded (at least, I hope you've been able to do it successfully!), click on the Send tab and follow the instructions for selecting Acrobat.com Files instead of My Computer.
You should now see the folder you just created. Open it up, and select the files you want to send.
If you have any trouble with this method, give a holler. Though since it's getting late here on the east coast, I might not be able to respond until the morning.

Error: Error uploading file master_a-master.css?

Muse has been working fine and publishing to Business Catalyst fine until this morning when I received the error -
﷯Error:
Error uploading file master_a-master.css. Click Resume to try again. If this problem persists, try again later.
Any ideas?
Nothing much has changed....
Thanks!!

I just got this error and found that I had a tab in my browser from the other day still open that had my BC site manage panel open. BC site manager logs the user out after a period of time so I guess this must have created the error as as soon as I logged back in to BC and resumed the upload from Muse, everything continued to upload without any problem.

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

Server response: "Error uploading file *-sprite.png. There was no respone from the server....."

Hi, I am experiencing a publish upload problem from Muse.
Upload to publish starts and continues until I reach uploading images 1-431.
After a few moments the following error is dashboarded:
>> Error uploading file u19121-sprite.png. There was no response from the server. Check your network connection, and try again. If this problem persists, try again later. <<
Server connections my side are fast and OK
Please advise.
Would I be correct that the receiving server at Business Catalyst is just busy? I notice it does start to continue uploading, however it does come up with similar errors further along the image count upload.
Message was edited by: EssexmanRSA

Under Business Catalyst, server... found response >> server modifications... June 5th evening.
So looks like problem all round while we wait til sorted.

File upload error: Error uploading file. Error moving uploaded file from temporary folder. (FILE_UPL

what causes this error:
File upload error: Error uploading file. Error moving uploaded file from temporary folder. (FILE_UPLOAD_ERROR)

On 5/17/07 4:26 PM, in article [email protected],
"Gü[email protected]" <> wrote:
>
> To my experience servers behave differently -- on some I really had to use
> 777, others are happy with 755.
>
> in regards to "any user" :: On most ADDT respectively MX Kollection - based
> backends I made the image & file upload feature available to user having e.g.
> the "levels" 1 & 2, but not 3 -- I wouldn´t expose something like this to all
> users
>
> Günter Schenk
> Adobe Community Expert, Dreamweaver
My backend is only for admin, so they are the only ones who can access the
upload pages. My concern is an images folder on the site being 777. Can't
anyone from the outside plant a file in that folder if they just know where
to find it using an ftp program? ?

Error uploading file index.html

When I try to publish my site to my business catalyst is stops and I get this message:
error uploading file index.html Click Resume to try again or try publishing later
I've never had this problem before and everything on my catalyst dashboard seems to be in order. Please help.

Ask in the BC or DW forum and provide much more info like what you use on the page, file sizes etc.
Mylenium

"Error uploading file index.html. Click Resume to try again. If this problem persists, try again later. [550 /index.html: Not a regular file]"

When uploading to FTP Host it gives me this error "Error uploading file index.html. Click Resume to try again. If this problem persists, try again later. [550 /index.html: Not a regular file]" What does this mean and how can I fix it? I need to be able to upload my website and it is not allowing me to do so.

Hi
Are you still facing the same error ? Also, have you tried to export the file as html , does it shows same error ? You can upload the exported html to your server using any FTP client as an alternative.
Thanks,
Sanjit

I have error at File.Create ?

Hello
I have error at File.Create. My codes at below. What should i do ?
Thanks.
System.IO.File.Create("C:\\Windows\\Logs\\abc.log").Close();
System.IO.File.Create("C:\\Windows\\System32\\abd.dll").Close();
ERROR is that
konum: System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
konum: System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
konum: System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
konum: System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)
konum: System.IO.File.Create(String path)
konum: TicariSet.AboutBox1.compbutton1_Click(Object sender, EventArgs e) C:\Project\winform\TicariSet\TicariSet\AboutBox1.cs içinde: satır 826
konum: System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
konum: System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
konum: System.Windows.Forms.Control.WndProc(Message& m)
konum: System.Windows.Forms.ButtonBase.WndProc(Message& m)
konum: System.Windows.Forms.Button.WndProc(Message& m)
konum: System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
konum: System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
konum: System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
konum: System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
konum: System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
konum: TicariSet.Program.Main() C:\Project\winform\TicariSet\TicariSet\Program.cs içinde: satır 30
Ok

Hi ，
I have reproduced your code on my side, and StackTrace is the same as yours.
And from additional information: Access to the path 'C:\Windows\Logs\abc.log' is denied.
So you should grant that the correct permissions. Like the following screenshot
Now create abc.log file successfully.
In addition, there is a helpful thread, please check for more detailed information.
Access to the path is denied
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BIP with Siebel - error upload file

Hi,
I have the issue with error when try "upload file" BIP-Reports.
I will be very appreciate for prompt help...
Please find logs:
ObjMgrLog     Error     1 (soapbinding.cpp (675)) SBL-EAI-04304: Unknown Part ':oracle.apps.xdo.webservice.exception.OperationFailedException' for operation 'runReport' exists in SOAP message.
ObjMgrBusServiceLog     Error     1 (outdisp.cpp (247)) SBL-EAI-04308: Operation 'runReport' of Web Service 'http://xmlns.oracle.com/oxp/service/v11/PublicReportService.PublicReportServiceService' at port 'PublicReportService_v11' failed with the following explanation: "oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport Failure: Due to oracle.apps.xdo.servlet.CreateException: Report definition not found:/SiebelCRMReports/Account List/Account List.xdo".
XMLPReportLog     XMLPReportError     1 Invalid User Name and Password for BIP Server
ObjMgrBusServiceLog     Error     1 (xmlpadaptersvc.cpp (2287)) SBL-RPT-50529: Verify BI Publisher Server Userid and Password.
XMLPReportLog     XMLPReportError     1 Error in generating Report Output file D:\siebel\8.1.1.0.0\ses\siebsrvr\xmlp\reports\test1-164BT.HTML in the XMLP Engine
ObjMgrBusServiceLog     Error     1 (xmlpadaptersvc.cpp (2983)) SBL-RPT-50524: BI Publisher engine failed to generate report.
GenericLog     GenericError     1 Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
GenericLog     GenericError     1 ( (0) err=2818155 sys=9815388) SBL-OMS-00107: Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
GenericLog     GenericError     1 (bsvcmgr.cpp (1393) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
Regards,
Oksana

I am also getting the same error. Pls help.
HI All,
WE had done a report migration converting all our Actuate reports onto BI Publisher. The templates for the reports have been registered on the Siebel Screens and thus created on BI Publisher. We were able to view the reports and everything was fine. But then we had a netword crash and all the existing networks had to be reconfigured after which the BIPublisher reports are not accessible from the Siebel screens. I get an error
Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308)
and when I try to login to BIPublisher to access the reports I get an error
oracle.j2ee.ws.wsdl.LocalizedWSDLException: WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "file:/C:/WINDOWS/system32/dataservice.wsdl", caused.
Could anyone help me figure this out?

Error uploading file to patch cache

I am trying to manually add a patchset to the cache since I cannot be connected to the internet when applying patches.
The patchset is 9.2.0.5 and about 220MB. When I upload, I get an error stating
Failed to Upload file. Uploaded file of length 23167503 bytes exceeded maximum allowed length (134217728 bytes).
I have set my cache size to 750 MB and there were no other patches in the cache.
I did load a patch of about 32MB after getting this error and it loaded fine. Is there a setting somewhere that I have missed.
I hope somebody can help me to resolve this or this feature is of no benefit.
Thanks

From catalina.out I get the following message:
2009-08-24 06:48:22,821 WARN [http-8080-2] [org.kablink.teaming.web.portlet.handler.LogContext InfoInterceptor] - Action request URL [http://teaming.somecompany.net/ssf/a...1251096503072] for user [liferay.com,ajudge]
2009-08-24 06:48:22,825 WARN [http-8080-2] [org.kablink.teaming.spring.web.portlet.DispatcherP ortlet] - Handler execution resulted in exception - forwarding to resolved error view

I can't upload files created in Microsoft publisher, but I could a few days ago. Why?

I am using the PDF online converter and had no problems with it only a few days ago, but now I get an e-mail sent to me with an error message that says the following:
"While processing your job 491DC3BA-6868-08A14D (C:\Users\Public\Advertising documents (pub and pdf's)\Langley advance Ads 2008\ad for surry paper november 2008 color.pub), the converter encountered the following error situation:
Document processing discontinued : Publisher application failed to open the document and exited
Please try to resubmit your job if indicated in the above message.
We apologize for the inconvenience.
The Create Adobe PDF Online Team"
I use this service quite alot and don't have any other way of converting a file to PDF. I have tried in thepast to download an extension that would allow me to do it without the online converter, but it is'nt supported in Vista.
Help!
Mina Lee Thomas

Hi Mina Lee Thomas
The Online PDF Converter is a busy line, which often has a long waiting que. Error can happen in a busy line.
I suggest you use following Freeware PDF Converters.
1] Cute PDF Writer 2.6 that comes along with ghostscript Converter.
This is fast, requring no adjustments and converts many pages text
files, PPT flles easily without any errors. It is user friendly.
2] PDF Tools.
This has multifunctions.Encrypt, Decrypt, Merge, Split, Reaarange
PDF files, Create PDF, Stamp utilities. This is also very useful
freeware.
Please download these two Freeware from website. you do not have to depend on external sources.
Regards and best wishes
Dinkar
Freelance Service Provider
[email protected]

Visual Web JSF Portlet Upload file Problem in Websynergy

Hello,
I am using Websynergy milestone 3 release. I have tried to build AS A PORTLET the sample code, "Uploading Files in NetBeans Visual Web JSF Applications" (http://www.netbeans.org/kb/60/web/intro.html) using netbeans 6.5. The solution deploys successfully but unfortunately, the file Upload control does not work in the websynergy portlet environment. No file seems to be uploaded. The same code works very well in non-portlet environment. Is there a work-around for the Portlet environment?
Looking forward to some help!
Pius

Hello,
I am using Websynergy milestone 3 release. I have tried to build AS A PORTLET the sample code, "Uploading Files in NetBeans Visual Web JSF Applications" (http://www.netbeans.org/kb/60/web/intro.html) using netbeans 6.5. The solution deploys successfully but unfortunately, the file Upload control does not work in the websynergy portlet environment. No file seems to be uploaded. The same code works very well in non-portlet environment. Is there a work-around for the Portlet environment?
Looking forward to some help!
Pius

SAP Netweaver ABAP 7.01 Trial - Error - could not create dir:L:\sapdb

Dear,
I am evaluating SAP....Installing SAP Netweaver ABAP 7.01 Trial. I am getting following error. Please help.
Quote:
> Subprocess starts at 20100720115554
Execute Command : F:\sapdb\programs\pgm\dbmcli.exe -n rajnish -d NSP -u CONTROL,******** db_online
Execute Session Command : exit
> Subprocess stops at 20100720115554
> Subprocess call failed
ERR
-24993,ERR_RTEEXT: Runtime environment error
1,could not create dir:L:\sapdb
3,The system cannot find the path specified.
UnQuote

Hi Mahendra,
Thanks for quick response.
Please find below the log. I tried changing the drive assignment of partition to L, I am getting following log and the installation terminates.
Please help.
> Subprocess starts at 20100720142743
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142743
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142743
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142743
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -R H:\sapdb\NSP\db dbm_version
Execute Session Command : exit
> Subprocess stops at 20100720142745
OK
VERSION    = 7.7.07
BUILD      = DBMServer 7.7.07   Build 016-123-231-153
OS         = WIN32
INSTROOT   = H:\sapdb\NSP\db
LOGON      = True
CODE       = UTF8
SWAP       = full
UNICODE    = YES
INSTANCE   = (unknown)
SYSNAME    = Windows Server 2003 family
MASKING    = YES
REPLYTREATMENT = none,zlib,auto
SDBDBM_IPCLOCATION = H:\sapdb\data\wrk
> Subprocess starts at 20100720142745
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142745
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142745
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142745
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142745
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142746
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142746
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142746
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142747
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142747
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142747
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142748
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142750
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142750
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720143126
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143309
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143309
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143309
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143310
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143310
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720143310
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720143311
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720143311
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720143413
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720143413
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
regards.
Rajneesh

WEB DMS Error uploading file / create DIR

Similar Messages

Maybe you are looking for