Web Dynpro ABAP application - Fully Qualified Domain Names (FQDN) error

I have created a Web Dynpro ABAP application. On executing it, I get Fully Qualified Domain Names (FQDN) error. I have host name of my server.
I do not know domain name of my server. How can I detect it?
I want to know in Windows XP and Windows 7.
Please help me asap.

Hi,
On your server run command ipconfig /all
FQDN = Hostname + Primary DNS Suffix
The make sure the profile parameters SAPLOCALHOSTFULL and icm/host_name_full reflect the same.
Regards,
Srikishan

Similar Messages

Fully Qualified Domain Names (FQDN) error - How to get domain and extension

I have created a Web Dynpro ABAP application. On executing it, I get Fully Qualified Domain Names (FQDN) error. I have host name of my server.
I do not know domain name and extension name of my server. How can I detect it?
I want to know in Windows XP and Windows 7.
Please help me asap.

Hello,
Right click on the my computer and click properties and then go to the tab computer name .
there you will have full computer name and this should have your host name as well as the domain name.
to check the domain name click on change a new popup will open ther domain will be metntioned.
IF nothing is ther in the domain then add just .(dot) at the end of the computer name .
and save it and then put the same name in the ICM/host_name_full parameter in rz11 and try .
thanks
sarbjeet
Edited by: sarbjeet singh on Jan 23, 2011 10:26 AM

BI 7.0 Java Add-in without fully qualified domain name

Hi
I have just installed the Java Add-in for BI 7.0, and now I am trying to set up BEx to work. I have run the template installer, but there seems to be an issue with server names vs. fully qualified domain names. The server name is currently in the format "server.domain", but I suspect that it should/must be "server.domain.com".
Is it possible to get full functionality without using fully qualified domain names (FQDN)? Is so, how can I acheive this?
Regards,
Thomas
Edited by: Thomas Kjelsrud on Apr 23, 2008 8:39 PM

This issue is no longer relevant for me. I still wish to find the solution tough, for future reference.
Tegards,
Thomas

/etc/hosts Private Host Name Fully Qualified Domain Name does it matter?

During installation of 11gR1 on Windows 2003 the examples in the installation guide show adding the Private IP and host name to /etc/hosts
However they only add the short name, racnode1, not Fully qualified Domain Name (FQDN), racnode1.mycompany.com
e.g.
10.0.0.1 racnode1
10.0.0.2 racnode2
Later when installing the Clusterware it then expects to see the FQDN, racnode1.mycompany.com, of course you can modify this and remove the domain name and continue. OR go back and add the FQDN in /etc/hosts
e.g.
10.0.0.1 racnode1 racnode1.mycompany.com
10.0.0.2 racnode2 racnode2.mycompany.com
What is the best practice? Currently my company is just dropping the FQDN from the name during the install, my instinct is instead to add the FQDN to the /etc/host in the first place.
Does anyone have a recommendation or experience with either situation?
Will (using/ or not using) the FQDN cause me issues in the future?

If it's a problem, the assistent will tell you :-)
I don't think it's a problem.
Please mind that the first entry will be the name of the ip address, if it's not in DNS and a utility tries to get the name. (that's the reason 127.0.0.1 resolves to localhost.localdomain, it's the first entry in /etc/hosts)

Fully qualified domain name in EP 6.4 configuration

Hi guys,
I've got some problems with using fully qualified domain names (FQDN) while getting to Portal.
Having EP installed and running properly, I've installed, on my MS Windows 2003 Server (on which my EP is running), DNS to provide FQDN.
Until this my EP worked properly (I get to my portal main page using host name without FQDN - http://<host>:<port>/irj).
After installing DNS and configuring new domain my EP runs properly when I get via simple hostname, but I've noticed, that it isn't working properly, when I try to get via url with FQDN.
The FQDN is correctly recognized on sysop level (ping...) - the problem is surely in EP configuration.
The most common symptom is an empty HTTP page or a portal page containing some interface elements, but without content.
Who knows what I have to change in my EP configuration?
I will be thanful for any help.
Best regards,
Marcin

Hi Chung,
Thanks for advice.
Actually, in my case, problem was in IE internet settings.
The solution was adding host name to the host list in in "local intranet" setting (tabpage Security).
Regards,
marcin

Exchange 2013 wildcard certificate - problem IMAP POP Because the matter is not a fully qualified domain name

Hi all, I have an Exchange 2013 SP1, I have installed a third-party SSL certificate and correctly on the server, but when I assign the POP and IMAP services, I see this error
The certificate with thumbprint XXXXXXXXX and subject '*. Xxxx.yyy' can not be used for POP SSL / TLS connections because the matter is not a fully qualified domain name (FQDN). Use the Set-POPSettings X509CertificateName command to set the FQDN of the service.
I tried to run this command and restart the POP and IMAP services
ImapSettings set-ca-server-1-X509CertificateName mail.xxxxx.yyy
POPSettings set-ca-server-1-X509CertificateName mail.xxxxx.yyy
But the POP and IMAP services, the certificate is not assigned.
You know as you can solve
regards
Microsoft Certified IT Professional Server Administrator

Hi,
Before we go further, I’d like to confirm if you can use POP and IMAP properly.
If everything goes well, we can safely ignore it:
http://www.hsuconsulting.com/wildcard-ssl-certificate-exchange-2013-imap-and-pop-error/
If not, we can try the following commands :
Set-POPSettings -ExternalConnectionSetting {mail.domain.com:995:SSL}
Set-ImapSettings -ExternalConnectionSetting {mail.domain.com:993:SSL}
http://careexchange.in/how-to-enable-and-configure-pop-imap-in-exchange-2013/
Note: Microsoft is providing the above information as convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

How can I call a java object from Web dynpro ABAP application?

I made Web dynpro ABAP application and posted it to SAP EP.
For certain business purpose, we need to call external 3rd party java object using 3rd party's java api in Web dynpro application.
Is there anybody who experienced this kind of java interface issue?
I know Web dynpro Java environment can fully support this kind of requirement. but regarding Web dynpro ABAP, I couldn't find any clue for this.
Any comment or suggestion would be greatly appreciated.
Thanks,
Raymond, ABAP Consultant

if you have jco configured, then you can make calls to java api from ABAP .
check out this weblog.
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
Raja

Problems creating new Web Dynpro ABAP application

All,
I am following this tutorial to create my first Web Dynpro ABAP application
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fc/501b42b5815133e10000000a155106/frameset.htm
In this tutorial I was asked to create a component as Local object.
But after giving the name of the component, I get an alert saying
"Object can only be created in SAP Package"
When I confirm this, I was shown a "Create Object Directory entry" dialog box which asks for attributes like Package.
And this box has Local Object button, when clicked I get the message "Test Objects cannot be created in foreign namespaces".
I found some other article through Google
http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_I.pdf
According to this, I tried to give $TMP as Package. But still have the same error
"Test Objects cannot be created in foreign namespaces"
Where am I and what should I do to create a new project?
Thanks.

Thanks Abinav.
My problem is with naming convention only. Component name starting with Z solved my problem.

Httpd: Could not determine the server's fully qualified domain name, using

Hello, I am checking why the response time of the display of the pages of the sites are slow, then I checked the error_log file in /var/log/httpd and I got this texts: (I am hosting 3 sites in the server)
[Mon May 14 21:21:37 2007] [alert] httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
Processing config directory: /etc/httpd/sites/*.conf
Processing config file: /etc/httpd/sites/000010.129.0.37_80avepublishing.com.conf
Processing config file: /etc/httpd/sites/000110.129.0.37_80escuelamovil.com.conf
Processing config file: /etc/httpd/sites/000210.129.0.37_80sabiduria.com.mx.conf
Processing config file: /etc/httpd/sites/0003any_80default.conf
Processing config file: /etc/httpd/sites/virtualhostglobal.conf
[Mon May 14 21:21:37 2007] [alert] httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
[Mon May 14 21:21:38 2007] [notice] Apache/1.3.33 (Darwin) mod_jk/1.2.6 DAV/1.0.3 mod_ssl/2.8.24 OpenSSL/0.9.7l PHP/4.4.4 configured -- resuming normal operations
[Mon May 14 21:21:38 2007] [notice] Accept mutex: flock (Default: flock)
[Mon May 14 22:12:18 2007] [error] [client 10.129.0.37] File does not exist: /Library/WebServer/Documentsescuelamovil/robots.txt
[Mon May 14 22:12:18 2007] [error] [client 10.129.0.37] File does not exist: /Library/WebServer/Documentsescuelamovil/error.html
with the alert:
[Mon May 14 21:21:37 2007] [alert] httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
the virtual host file (virtualhostglobal.conf) is:
# This file is auto-generated by the Server Admin Web
# backend plugin whenever settings are saved.
# The Listen and NameVirtualHost directives are generated
# based on the VirtualHost directive inside
# each site configuration file found in this directory.
# Please add appropriate Listen and NameVirtualHost directives
# if a site is manually edited
# i.e. the site is moved from sites to sites_disabled (or vice versa)
# or the site's Virtual Host ip address and/or port is modified
# Last updated at 2007-05-07 14:22:34 -0500
Listen 10.129.0.37:16080
NameVirtualHost 10.129.0.37:16080
Listen *:16080
NameVirtualHost *:16080
how can I correct this alert?
thanks
Dual 2 GHz PowerPC G5 Mac OS X (10.4.9) 4GB DDR SDRAM, MAC OS X Server
Dual 2 GHz PowerPC G5 Mac OS X (10.4.9) 4GB DDR SDRAM, MAC OS X Server

>how can I correct this alert?
Fix your DNS.
This non-fatal error is Apache's way of telling you that it can't work out the hostname of the machine it's running on.
It uses reverse DNS to determine this information. If you don't have a reverse DNS entry for your server's IP address, this is what you get.
Fix your DNS and the alert will go away, or just ignore it.

How to call custom themes for Web Dynpro ABAP Application?

Hi,
I need to change the appearance of Web Dynpro ABAP application. So far I followed below steps,
1.     Created theme folder u2018testngou2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> u2018testngou2019 ).
2.     used program BSP_UPDATE_MIMEREPOS to dowmloaod content of u2018sap_tradeshowu2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> sap_tradeshowu2019) to desktop.
3.     Modified the themes using Eclipse Theme Editor.
4.     used program BSP_UPDATE_MIMEREPOS to upload modified themes to MIME repository u2018testngou2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> u2018testngou2019) .
My current URL is like http://server.name:XXXX/sap/bc/webdynpro/sap/hrrcf_a_startpage_int_cand?sap-client=XXX.
Now I want to know how custom themes called for Web Dynpro ABAP Application.
Is my approach correct?
...Naddy

Hi Naddy,
What you used is one way and even I failed when tried that method,
Instead go to SE38 - WD_THEMES - and you need to upload the zip file and you need to follow a folder structure.
it is case sensitive, atleast the zip file.
Make a zip file by name "Project.zip" -
Create a Folder Project and have the below folder structure,
1 data - all the properties files and also the designinfo file, below is the code
2 themes - (to get all the files download the theme from portal and you will have all the folders)
   2.1 ur
     2.1.1 name of the theme
       2.1.1.1 common
       2.1.1.2 csf
       2.1.1.3 r
       2.1.1.4 ur - all the css files (would be good if you can get the files from the server.)
       2.1.1.5   WSRP
3 war - empty folder
*.designinfo
isVisible=true
version=7.0.14.1.0
isDefault=false
isSapDesign=false
designName=**** name of the theme
Once done create a zip file and click on Start Import and give the path and will ask for transport request, it will take a while to upload once done as mentioned in the use the parameter sap-ep-themeroot="path"
This will resolve the issue.
Cheers-
Pramod
reward points if helpful

Ip address to fully qualified domain name

Dear friends, I am unable to get the correct fully qualified domain name from IP address. Please help. I have already spent more than a day searching for the solution on these forums and on google. So now only option remaining is help from you friends.
I think I need to explain my set up first.
The machine runs on Solaris8 & is part of corporate intranet. Java version 1.4.2. I am just a developer (cannot touch networking) and here is what I know about its network set up.
The machine has a network alias ("bluesky"). So when I access it thru telnet using VPN, the command line shows "bluesky" at the prompt. There are at least two domain names that lead to this machine. One is bluesky.XXX.com and another is somesubdomain.yyy.com.
I have a piece of existing Java code that produces the IP number of this
machine. I want to convert it to its domain name (either bluesky.xxx.com or the other one).
When I connect by VPN to the network and use nslookup against the IP on my XP laptop, it displays the full domain (somesubdomain.yyy.com). When I do the same thing after I join the intranet directly (not thru VPN), it again shows the full domain, but the different one bluesky.xxx.com.
Some of the code I tried:
Try 1:
String ip = "";//valid IP here
InetAddress ia = InetAddress.getByName(ip);
String hostname1 = ia.getCanonicalHostName();
String hostname2 = ia.getHostName();When I connect to intranet (without VPN) and run the above code on my laptop, hostname1 and hostname2 both generate "bluesky.xxx.com". This is what I want.
But when I run the code on the remote machine, both strings are only
"bluesky". When I run the code on my laptop after logging into the network using VPN, both produce the second fully qualified domain name. That would also be OK for me if I can get it on remote machine.
Try 2:
I added the following line before the above code (based on forum search).
System.setProperty("sun.net.spi.nameservice.provider.1", "dns,sun");The result was same as Try1.
Try 3:
InetAddress[] iaa = InetAddress.getAllByName(ip);
for(int i=0;i<iaa.length;i++){
System.out.println(iaa.getCanonicalHostName());
System.out.println(iaa[i].getHostName());
When ran on laptop, it iterates only once (I expected it to iterate twice) and produces bluesky.xxx.com for both println statements.
On remote machine, it again produces only "bluesky".
It's getting frustating. Please help. Thanks.

Following could be the reason
When you are running the InetAddress api's to get the domain name on your laptop (windows machine), It is not hitting the DNS server. It is just returning the domian name what is mention in the Laptop configuration. If you are making a security check based on that, then anyone can spoof up his domain name locally and get the desired domain.
When you run the application at some remote machine, it actually resolves the ip address with DNS server.
You may want to use the following code to hit DNS server all the time. But with this I have a issue. I am not able to get the domain when I am on VPN. I have to find the exact reason for this issue.
private static String domainFmReverseDNS(String hostIp) throws IOException
//Record opt = null;
Resolver res = new ExtendedResolver();
Name name = new Name(getReversedIP(hostIp)+ ".in-addr.arpa");
short type = Type.PTR;
short dclass = DClass.IN;
Record rec = Record.newRecord(name, type, dclass);
Message query = Message.newQuery(rec);
Message response = res.send(query);
Record[] answers = response.getSectionArray(Section.ANSWER);
if (answers.length == 0)
System.out.println("reverseDns did not find anything");
return ("NotFound");
else
System.out.println("reverseDns found the value :-)");
return answers[0].rdataToString();
private static String getReversedIP(String ip)
StringTokenizer st = new java.util.StringTokenizer(ip, ".");
String reversedIp=st.nextToken();
while ( st.hasMoreTokens())
reversedIp = st.nextToken()+"."+reversedIp;
return reversedIp;
}

Create portal user using web dynpro abap application

Dear All,
I would like to know is it possible to create portal user-id through web dynpro abap application.
My requirement is
> I have to create a web dynpro abap application. In the web dynpro abap application I have name email-id and phone number as entry fields.
> I will click on submit, one unique id will get created. This unique id will be the login id for portal.
I found how to create portal user using web dynpro java, but i could not find regarding web dynpro abap.
If it is possible to create the portal users using web dynpro abap pls share the code as well.
Regards,
Swapnil Indulkar

Hi swapnil,
I think by using BAPi.. BAPI_USER_CREATE1 you can create.
Please check this...
Create portal user from webdynpro abap
Creating user and assigning a group through code
user administration su01
How can i get the portal user id from logon ticket in the webdyn 4 ABAP
Cheers,
Kris.
Edited by: kissnas on May 21, 2011 8:47 AM

How to integrate backend web dynpro abap application in Portal 7.3?

Hello,
before Portal 7.3 I was able to integrate a web dynpro abap application as iView in the portal. Now I don't get the point on how to do it. I cannot find a "normal" iview that enables me to give the backend and the application name. The possibilty to create iView based on remote source looks strange because I don't want to upload the application I just want to do my normal user/pass mapping and show the applicaton via iView.
Somehow I don't get the point with the new version. Could someone give me a hint where to find more information regardings this problem`?
Thanks a lot,
Vanessa

Hi Vanessa,
Could someone tell me if I should see the SAP Web Dynpro for ABAP iView template in the long list of available templates when I create a new iView?
You will 'SAP Web Dynpro iView' option in the list while creating iview from template.Create and change the property platform to 'Web Dynpro for ABAP'.
Is it correct not to use the remote source option? I think yes because otherwise he would upload the app to the portal, if I am not wrong.
If i understood your question correct,then You can use this option as well to create iview.Atlast it wil create only iview for the application not the application itself in the portal.
Naga

Reg: Web Dynpro ABAP application in mobile

Dear Experts,
Is there any possibility to show the Web Dynpro ABAP applications on mobile?
if possible is there any steps to do implement that?
Regards
Arun.P

>
Abhimanyu Lagishetti wrote:
> a small correction
> it is Sybase Unwired Platform actually where sybase is giving a device independent platform to build mobile applicaitons.
No, Frank was correct. Sybase Unwired Platform was renamed SAP Unwired Platform during the SAP - Sybase Media Day in August 2010. Although as it generally goes with renames within SAP, the old names die hard.

Error in Installing- System dosen't have fully qualified domain name.

When I try to install Java Enterprise System in my PC, I get the following error message and cannot proceed further:
System dosen't have fully qualified domain name.
Setup fully qualified domain name and then continue instalation.
Please help me to solve this problem.
About my PC:
Windows XP Home edition
1 GB memory
Thanks.

Do you have DNS running on the net and configured right? Run "ipconfig" in a Windows XP command line to see if the DNS suffix is set. Another trick is to run "nslookup" in the command line and look up your system's IP address (wehich ipconfig will tell you.) If that doesn't get you a DNS name for the system, you need to fix that in the network connections dialogs.

Web Dynpro ABAP application - Fully Qualified Domain Names (FQDN) error

Similar Messages

Maybe you are looking for