Web Dynpro ABAP personalization not transported to Quality

Hello,
We personalized the iView in portal with j2ee_admin credential for SRM7.0 implementation at Role level.
We got the pop up saying Do no Transport personalization and transport personalization. We chose Do Not Transport Personalization in portal.
We transport the personalization using the application WD_ANALYZE_CONFIG_USER , we transported for all user.
But when we check in the portal the personalized content is not shown.
Could anyone help on this asap since we are in phase of UAT?
Regards,
Senthil Kumar S.

Please post it in forum [SAP Community Network Forums » SAP Solutions » Floorplan Manager for WebDynpro Abap |;
Close this thread.

Similar Messages

Web dynpro Abap : Icons not display in alv table

Hi ,
I want to replace the content of a cell by an icon ,in an alv table.
I know how I should do it, but my icon is never displayed. There is only an "X" as if the icon hasn't been find.
Did anyone encountered the same issue?
Thanks
Karim

Hi Kraim,
I hope that you have followed the [correct procedure|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9] for displaying your icons within the ALV cells. May be you are passing an invalid icon name. Just try check out the dictionary table ICON to ensure that you are using the correct one.
Regards,
Uday

Web dynpro Abap not inheriting the Portal theme

Hi,
My Web Dynpro Abap is not inheriting the Portal theme. My understanding is that for NW2004, EP7, Web Dynpro Abaps would automatically inherit the Portla theme. Is there some coding required or pre-config of some sort that I have missed to allow the Portal theme inheritance?
thanks
C

Hi,
see also the [documentation|http://help.sap.com/saphelp_nw70/helpdata/en/46/89af7fbe4d429ee10000000a1553f7/frameset.htm]
Regards, Heidi

Browser Hangs iFbA in Web Dynpro Abap

Hi Support,
I'm developing an Abap Web Dynpro with Adobe Interactive Form inside.
I have setting these parameters: InteractiveForm.enabled = true, InteractiveForm.readonly = false.
Web Dynpro Page open correctly with iFbA but when I click one button in WD Page the event freeze Browser.
My system is ECC sp06, SAPKB70009 and SAPKA70009, but I can't patch the
system.
I implemented these Note:
1- Note 981638 - Dynamic forms are not supported in Web Dynpro ABAP
2- Note 1018060 - Adobe: Locale has invalid country/language combination
3- Note 999997 - Setting usage rights unnecessary with Adobe integration
Help me

Hi Enrico,
As per my understanding, you are able to view the interactiveform in your webdynpro and when you click on the button, it is getting hanged?
Have u created an event (onSubmit) in your webdynpro? set a break point in your submit event and see whether the request is reaching up to there or not?
And also.. set your form layout type as ZCL layout and activate it once.
Let me know if you still face the problem.
Regards,
Ravi.D

How to configure SSO for web dynpro ABAP (not web dynpro Java)

Hi Experts,
    I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
     procedure"
   Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
     signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
Piyush

Hi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N

NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
      Application Host: myr3.mydomain.com
      SAP Client: 600
      SAP System ID:   DEV
      SAP System Number: 00
      Server Port: <leave it blank>
      System Type: SAP_R3
      Logon Method: UIDPW
      User Mapping Type: admin,user
      ICM Host: myr3.mydomain.com:8000
      ICM Protocol: http
      ICM URL prefix: <leave it blank>
      SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AM

Thanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful

Error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap

Hello Experts
The error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap occurs after manager’s following actions:
selected detailed Team View ;
selected hierarchy;
changed style of the hierarchy to any other (for example, the vertical);
the error occurs after attempting to do any action.
Our system is EHP7.
If someone faced with this error, please give me advice how can i resolve this problem.

Hi John,
Sorry for the delay in replying. No, we do not have the same problem if we understand you correctly.
"We have bypassed the MSS Home Page and just embedded the Detailed Team View as a standalone application in our MSS portal role" - we also made for the our customer. BUT we have error «The entered value is not on the list of valid values» in our standard system.
Regards,
Andrey

Different languages are not available for Web Dynpro ABAP (WDA)

Hi Experts,
We are using Web Dynpro ABAP in 2 different languages (English/Spanish). Production environment only is available for English (WDA).
How can I make Spanish language available for Web Dynpro ABAP??. Is there any configuration or installation which I am missing?? Development and QA are OK (English/Spanish)
Thank you.
Regards
David Cortés.

Hi Experts,
Any help???
Regards
David Corté

Web dynpro abap application on Portal does not work via internet access.

Dear All,
I have created a web dynpro abap application and deployed the same on Portal.
The issue I am facing is that the webdynpro application works fine when the end user logs into Portal from Local Network,
However when the Portal is accessed from outside the local N/W via Internet, Portal is working fine for other applications like ESS
but the web dynpro application dont work.
Is this some configuration issue on the portal / abap development or any workaround is possible.
Regards
Abhinav Dagar

Hi
Please try to use the [HTTP Watch 5.0 Basic |http://www.httpwatch.com/download/] tool to trace that WD Application link from the portal and you can easily find out the problem.
Regards
Prakash T

Web Dynpro ABAP in SAP E-Recruiting

Hi,
We just imported SP8 for our SAP E-Recruiting 6.0. SP8 offers Web Dynpro ABAP as candidate UI. One question we have is how WD pages incorporated for recruiters who still use BSP pages. For example, when a recruiter logs into E-Recruiting and finds a specific candidate, he/she can click on "Candidate Profile" to get to that candidate's pages. In BSP technology, recruiter actually uses exactly the same pages that candidate uses for Work Experience, Education, etc.. With candidate UI using WD technology, does recruiter use the same WD pages when displaying candidate profile information? I have been searching all the possible places, such as IMG, SICF, in order find a spot so that I can set the switch on, but so far unsuccessful.
Any help is greatly appreciated.
Li

Hi Li ,
At best of my understanding in WD ABAP , its possible to make one WebDynpro page serving same purpose ( showing profile deatils ) visible for manty( Candidate , as well as Recruiter ) ....
I would like to know what exactly you want from web Dynpro ..then I will be in better position to tell you.
FYI ...
1) Web Dynpro ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
2 ) I can give you links that can help you a lot.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Wait not just that SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
The specified item was not found.
Cheers
Parry

Web Dynpro Abap: Select-Options: Save Selection Data

Hello,
I am using select-options in web dynpro abap. Need to add a feature where the user can save his selection values as a variant.
All I can think of is getting all the selection values and saving these into a Z table.
Can you suggest a better way?
Thank you.
Irene

Hi Irene,
Alas, it's currently not possible. You could write your own wrapper though adding a save button. Inside of the action handler you could retrieve the range tables of all fields, convert their content to a structure you like and save it a fitting db table. My suggestion is to use XML and a DB table with a XSTRING field in the data section to store the range table values.
Using personalization will allow you to customize your ui and to hide certain select option fields.
Best regards,
Thomas

BSP vs Web Dynpro ABAP

Hello,
we are looking for a listing that states the functional and technical differences between Web Dynpro ABAP an BSP.
Is there anybody who has come along such a list ?
Tx a lot in advance!
Best regards,
Ana

Annette,
check this
The SAP Web Application Server (WAS) provides a page-based programming model with server-side scripting as well as server page technology for developing, designing and implementing Web applications:
Business Server Pages (BSP). Server-side scripting enables direct access to all elements in the application server (such as function modules, database tables, ABAP Objects, and so on.).
We can create HTML pages or Business Server Pages (BSPs) with server-side scripting in ABAP or JavaScript.
The HTMLB and XHTMLB HTML Business libraries are available as BSP Extensions for a uniform layout and its associated usability advantages.
And In the Web Application Server, the presentation layer is separate from the business logic. This makes it possible to implement front-end technology.
Why BSP NOT WebDynpro
                          BSP
              ABAP WEBDYNPRO
Currently PMUSA/JMC customers are using Fire fox (Mozilla), Internet Explorer and Netscape navigator web browsers to access WEBUYPM application.
BSP supports these web browsers.
Restricted (Some of the features will not be supported by WebDynpro)
Existing WEBUYPM application is written in HTML, Business HTML and JavaScript language.
BSP supports these languages. And it allows even to mix ABAP, HTML and JavaScript thus has more flexibility to convert WEBUYPM application into BSP.
Web Dynpro does not support HTML/JavaScript.
Existing WEBUYPM displays the trade communications (Information tab) based on JavaScript and custom configuration file
BSP supports JavaScript, we can display the trade communications in BSP too.
Web Dynpro does not support Java Script.
Existing WEBUYPM application has different colors schemes, Logos and graphical elements for PMUSA/JMC companies.
BSP support s multiple color schemes/logo. These color schemes can be set dynamically based on company code selection at runtime.
Separate Themes has to be developed for each User Interface elements.
Development effort needs to be involved to even display a logo.
BSP supports client side (user) validations. As most of these validations can be done at client side, the no. of hits on the server can be reduced and thus giving better response for the user inputs.
In this way, performance can be increased.
Web dynpro does not support any client side validations, every time the request must be sent to server to validate the useru2019s input. This increases the traffic and reduces the performance
WEBUYPM application has logos, images.
BSP supports Client side caching, and thus loads these element from client side very quickly.
Web dynpro supports very little use of caching on the client side, and hence quite a significant delay in starting on some customeru2019s browsers.
BSP has no restriction on user interface possibilities, Ex. Grid, drop down boxes, Font colors, size etc.
Significantly more restrictive in user interface possibilities.
Ex. Only those fonts, which are provided by SAP, can be used.
Appearance can be changed dynamically using same web pages, to support different colors for different companies.
We can have same (or better) look and feel if we convert the application into BSP.
As there is no HTML coding involved in web dynpro the same look and feel as we have it today can't be achieved by using web dynpro.
BSP is built for developing any type of web application (including mobile applications. It can be accessed from desktop, laptop, and any kind of smart devices like PDA.
Web dynpro applications can not be accessed from PDA s (Not possible)
Why WebDynpro NOT BSP
             ABAP WEBDYNPRO
                           BSP
Personalization can be given to the end user if they do not want see any of the user-interface elements.
We can not hide any of the user-interface elements (Ex buttons ex) during the runtime.
Note - Current WEBUYPM application does not support any of these options.
Currently we are setting/retrieving the runtime context values in a session.
Web dynpro supports State full applications.
No additional development would be required.
BSP also supports to set runtime values and to retrieve the runtime context values, but minor development would be required to achieve this functionality.
Currently users can see view source for WEBUYPM HTML pages.
Using Web dynpro this can be restricted thus providing more security to the application.
HTML view source can be available to the users, Users can see the HTML client side code (not server side coding) as it does today.
By using Adobe Flash Island, powerful web pages (RIA) can be created.
But, Flash Island comes with Net weaver.
BSP does not support Flash Island. But, BSP supports Java Script.
JavaScript is essential for the new trend of rich internet applications (RIA), it is used by all the new applications, Ajax, Widgets, Flash, and even Microsoft is supporting JavaScript for the new generation of RIA
Web dynpro has wizard tools to generate the code to create/configure the User Interface elements.
Development effort would be required to create UI elements.
We dynpro has uniformity as we use standard colors provided by SAP
Uniformity can be achieved by using style sheets (minor development would be required).
Thanks
Bala Duvvuri

Web Dynpro ABAP Material

I am new to web Dynpro ABAP.
Please send the regarding sites to work out this concept.
Please send me materials or pdfs regatrding this topic
My Mail ID is <b>[email protected]</b>
Please help me.
I am requiring it a lot.
Please send me .
With Regards,
lokesh@EDS

Web Dynpro for ABAP in SDN
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/512040e1-0901-0010-769c-c238c6ca35d9 [original link is broken]
Developing ABAP Applications Using Web Dynpro
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/d41b25d2216babe10000000a1553f6/frameset.htm
Web Dynpro ABAP: Development in Detail
http://help.sap.com/saphelp_nw2004s/helpdata/en/03/0048413e466e24e10000000a155106/frameset.htm
WDA Sample programs & tutorials
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
Web Dynpro ABAP Demonstration Videos
/people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Wait not just that SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
The specified item was not found.
If you need some standard examples then do WDR* and you'll get a big list in se80 transaction. Also SWDP_DEMO is a good package to refer to. Check for WDR_TEST_UI_ELEMENTS and WDR_TEST_EVENTS for UI operations and their various events.
1) This is basic Info of WD ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
2 ) I can give you links that can help you a lot.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Wait not just that SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .

Want docs for Web Dynpro ABAP

Hi All ,
Can anyone please send me the Docs or link for Web Dynpro ABAP .
Thanks in advance
Rahul

Hi,
Web Dynpro ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706
Also, I have the official Web Dynpro for ABAP documentation. Please let me know if I should send it to you.
Hope that the following also helps you.
Web Dynpro for ABAP (WD4A, WDA) is the SAP standard UI technology for developing Web
applications in the ABAP environment. It consists of a runtime environment and a graphical
development environment with special Web Dynpro tools that are integrated in the ABAP
Workbench (SE80).
Web Dynpro offers the following advantages for application developers:
? The use of declarative and graphical tools significantly reduces the implementation
effort
? Web Dynpro supports a structured design process
? Strict separation between layout and business data
? Reuse and better maintainability by using components
? The layout and navigation is easily changed using the Web Dynpro tools
? Stateful applications are supported that is, if the page is changed and the required
data remains intact so that you can access it at any time throughout the entire
application context.
Note that stateless applications are not possible.
? Automatic data transport using data binding
? Automatic input check
? Automatic operation of the Web Dynpro application using the keyboard
? User interface accessibility is supported
? Full integration in the reliable ABAP development environment
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
? Clear separation of business logic and display logic
? Uniform metamodel for all types of user interfaces
? Execution on a number of client platforms.
? Extensive platform independence of interfaces
Structure
Metamodel Concept
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
Graphical Development Tools
To support this declarative concept, both the SAP NetWeaver Developer Studio and the
ABAP Workbench contain a range of Web Dynpro tools. You can therefore generate a large
proportion of a Web Dynpro application using the tools provided, without having to create your
own source code. This applies to the following parts of the application:
? Data flow between the front end and back end
? Layout of the user interface
? Properties of user interface elements
The Web Dynpro tools enable you to create source text areas manually within generated
source texts. These areas are not changed if the source code is regenerated.
Separation of Business and Application Logic
Using Web Dynpro enables a clear separation of business logic and display logic. A Web
Dynpro application runs on the front end and has local or remote access to the back end
system via a service. This means that the display logic is contained in the Web Dynpro
application, while the business logic and the persistence of the business objects run in the
back end system. The following options are currently available for connecting Web Dynpro
applications and the back-end system:
? An interface generated using adaptive RFC, through which BAPIs of an SAP system
can be called
? An interface for calling Web services
? A self-generated interface
The source code required for connecting the Web Dynpro application can be generated
from a UML definition of the Web Dynpro interface. A UML definition can be imported
into the Web Dynpro tools as an XML file.
Conversion of the Model-View-Controller
Conversion of the Model-View-Controller Programming Model
Every Web Dynpro application is structured according to the Model View Controller
programming model:
? The model forms the interface to the back end system and thus enables the
Web Dynpro application access to data.
? The view is responsible for the representation of the data in the browser.
? The controller lies between the view and the model. The controller formats
the model data to be displayed in the view, processes the user entries made by the
user, and returns them to the model.
/people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
Reward points if useful
Regards
Anji

Is there a way to get Web Dynpro ABAP available in a ECC 5 - NW2004 env?

We will start developing an offline Adobe interactive form with email functionality for ECC 5 on very short terms. We have to decide asap what client/server configuration we will use for this new functionality. We will also develop an online interactive form and an offline form with upload/download functionality for ECC 5. We will have to setup a client/server configuration that supports all 3 scenario's.
The main reason we would like to have NW2004S available for ECC 5 is because we would like to develop the forms in Web Dynpro ABAP instead of Java. Guided Procedures is a "nice to have" too, but not really important at this moment.
At this moment we think we have 3 options:
1. Investigate if we can make an Adobe solution in WDA for ECC 5 with our current setup
2. Upgrade ECC 5 - NW 2004 -> NW 2004S to get WDA functionality available
3. Install ADS for NW 2004 to be able to create Adobe solutions in ECC 5, then we will have to develop in WDJ
1. We have the following configuration up and running: NW2004S - CRM 5 and ADS installed: both Java and ABAP stack work properly. We are wondering if we could develop an Adobe interactive form in Web Dynpro ABAP in CRM 5 using BAPI's to retrieve the data from ECC 5 and put it on the form for display or update purposes. Also we have questions about the email functionality: do forms have to be send by email via a mailserver from ECC 5 via CRM 5 and back or can this be done directly from and to ECC 5 or is it not possible at all? Also we don't know if we can develop an online interactive form for ECC 5 via CRM 5. The current setup is not a real option for us right now as we see far too many uncertainties. Does somebody can give us some answers on the possibilities we are looking for?
2. My assumption is that upgrading ECC5 to ECC6 can be compared with upgrading 46C to ECC5. If my assumption is correct, this would mean an upgrade project with a 6 months leadtime within our company. If my assumption is wrong, please let me know. This upgrade will happen some day, but it has not been planned for 2007. So unfortunately, for us this is not an option at the moment because we cannot wait that long. I was hoping an upgrade of NW2004 -> NW2004s was not that time consuming but I guess this can be compared with a SAP upgrade project like 46C -> ECC 5.
3. Installing Adobe Document Services for NW2004 is not our preferred solution but we think it is the safest/easiest solution at this moment to get started with Adobe interactive forms for ECC 5 on short terms. We will have to develop in Web Dynpro for Java, so be it.
WDA is not a must but if we can find a client/server setup which gives us the possibility to build in WDA for ECC 5 functionality, that would be great. That's why I dropped the question on SDN. I want to be sure we choose the best option possible at this moment for us.
kind regards
Angelique

Yesterday I got new information through SDN which sounds very interesting:
There are technical repository integration points between ECC and the underlying SAP NetWeaver release. To get Web Dynpro for ABAP, you could install a stand-alone SAP NetWeaver 2004s system (without ERP) side-by-side.
Somebody else wrote: we set up a 3-system landscape of NW04s and have configured single sign on and trusted RFC's so that users can hit the webdynpro pages via the portal, and those systems make the necessary queries to the backend systems via RFC.
Does somebody know if this stand-alone system could be a proper solution for our situation? Does somebody foresee any problems related to Adobe LiveCycleDesigner or ADS?

Web Dynpro ABAP personalization not transported to Quality

Similar Messages

Maybe you are looking for