Web Dynpro ABAP Unwanted Menu Bar

Goodday,
I'm calling a custom transaction in the back end from my WD App by using
CALL METHOD lo_window_manager->create_external_window
I have 'sentenced' all the 'bars parameters ' to abap_false.
In the back end a custom transaction gathers all info and does all checks after which a SmartForm is called and in the external WD window an invoice is shown in PDF format which reads from above:
" Print Preview in LOCL"
Buttons: MENU BACK CANCEL SYSTEM
My Question:
Is it possible to suppress these four buttons and just show the PDF invoice?
Is there perhaps some further manipulation possible with
        control_parameters   = h_control
        output_options       = h_output
(I'm testing the WD-App with SE80 but I assume the buttons will also appear when running in the Portal)
Thanks,
Mike

Hi
Found the answer:
  DATA: lr_febutton TYPE REF TO cl_salv_wd_fe_button.
  lr_febutton->set_image_source( '@4B@' ).
Just used a wrong class.
Best regards
Lars

Similar Messages

  • Web Dynpro ABAP ALV menu button icon image

    Hi
    Does anybody know how to add or link an image or an icon to a menu button in a
    Web Dynpro ABAP ALV view?
    I know how to do it in the alv table column but can't find a method for a menu button.
    Best regards
    Lars

    Hi
    Found the answer:
      DATA: lr_febutton TYPE REF TO cl_salv_wd_fe_button.
      lr_febutton->set_image_source( '@4B@' ).
    Just used a wrong class.
    Best regards
    Lars

  • Cannot see Ecatt option in context menu in web dynpro abap in SE80 ECC 6.0

    Hi ,
    I saw a presentation by Thomas in which there is option of recording ecatt script on context menu in web dynpro abap application.we are on ECC 6.0 we are trying to record WDA applications and test them by using Ecatt but I am unable to see the option of recording the ecatt script in SE80 editor.
    Why could this be happening

    Thanks ,
    I saw that disappointing note ...any other way to automate web dynpro abap testing ? please advise.

  • Modification of Web Dynpro ABAP ESS application

    Hi,
    I'm familiar with the modification process of ESS Web Dynpro Java applications using NWDI. However I have to adda button a view in the "Create Expense Report" iView which is a Web Dynpro ABAP application from ERP 6 Ehp3. On the click of this button a pdf report should be shown. The Web Dynpro ABAP application is FITE_EXPENSES.
    Can anyone tell me what is the process for modifying ESS WD ABAP code? Do I copy and create a new application and then modify?
    I'm not getting any documentation on this on SDN or SAP Help.
    Regards

    hi,
    ->You dont have to copy and create new application.
    -> You can use Enhancement Framework Technology.
    -> Look out for Blogs by Thomas Weiss. They are very useful.
    -> Easiest way out to create new button would be as :
         -> Put your application in display mode.
         -> There is button for Enhancement in the tool bar (Spiral shaped).
         -> Press that button and create a new enhancement.
        -> Now add any UI Element you want to add.
         -> In Enhancement Framework we do have some Post Exit and Pre Exit Methods.
        -> Some Enhancement Points are already given by Standard SAP.
       -> You can write the logic there and activate the Enhancement.
    Check out this link for basic idea about enhancement.
    http://help.sap.com/saphelp_nw04s/helpdata/en/0e/4d3e42fc94aa04e10000000a1550b0/frameset.htm
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
    I hope above links will be helpful.
    Thanx.

  • Opening External Window in Web Dynpro ABAP with URL disabled or Hidden

    Hi Experts, I have a requirement where-in we want to open the Web Dynpro ABAP application using tcode WDYID (by passing the application name  and startmode), but the URL of the newly opened explorer should be disabled or hidden. To achieve the same, I have created a component (lets name it PARENT) and inside that in DOMODIFY/DOINIT method have written code to invoke the required WDA (lets name it CHILD) in external window (by using lo_window_manager->CREATE_EXTERNAL_WINDOW) and is successfully able to open the application with URL disable using different parameter of method CREATE_EXTERNAL_WINDOW. But in this case there are 2 window which opens, one is for PARENT view and other is for CHILD. Now I only want to keep the second view (CHILD) to be opened and want to close the PARENT view. When I used EXIT_PLUG to close the PARENT window, it closes both the window. Need your inputs on my approach or if you have any. Regards, Harish

    Hi,
    If you open the popup, it opens as Modal Window, originating from Parent window. Without external window( where you can pass has_location = abap_false ), you cannot hide the URL/Address bar.
    If you want to partially hide the URL( if you dont want to show the full URL with application path), you can create an Alias for the service in SICF.
    Go to SICF, and create an alias for your WDA application; say original URL: domain:port/sap/bc/webdynpro/sap/<ZAPPLICATION_NAME>
    This URL you can convert( partially hide) as, domain:port/sap/<ANY_NAME>
    Refer creating Alias in this help: http://help.sap.com/saphelp_sem320bw/helpdata/en/55/361a3c9c004866e10000000a11402f/content.htm
    Hope this helps u,
    Regards,
    Kiran

  • Web Dynpro ABAP: Documentation and help link

    Hi,
    I'm in the process of creating a Web Dynpro ABAP application and was wondering whether you can maintain Documentation for the application, as you would a standard ABAP report? I see the Documentation option in the Goto menu of the workbench, but it is inactive.
    Also, i notice you can maintain a 'Help Link' for the application. Does anyone have any information on this as I can't find anything on the SAP Help website.
    Thanks,
    Nick

    Hi Nick,
    here's the link to the corresponding documentation:
    http://help.sap.com/saphelp_nw04s/helpdata/en/54/bad1d244b2754bac09ae1558c15984/frameset.htm
    If you choose the Change/Edit button at the right side of the input field, you can navigate to the info object to which you want to set the link in the Knowledge Warehouse. 
    Of course, you need an info object in the correct context in the KW for this as well as a correctly maintained RFC destination to the Knowledge Warehouse system.
    Regards, Heidi

  • CRM2007 How to add a Web Dynpro ABAP application to a CRM business role

    I am investigating CRM2007 UI framework and I cannot seem to find a way to add a custom made Web Dynpro ABAP Application (created in CRM 4.0) to a business role, or how to add a custom transaction created in classic ABAP (transaction created via se93, progam created via se38). Whatever I do, I only see BSP components. I am using transaction BSP_WD_CMPWB.
    Next to this it seems you can add/integrate Visual Composer applications to (there is an entry in spro called "integration of the visual composer in BI"). However, I presume we first have to meet the requirements for the portal integration in SAP CRM 2007 as described in spro. If somebody knows how this works, that would be great!
    kind regards
    Angelique Heutinck

    Hello Angelique,
    It should be possible to call web dynpro applications from the L-shape menu of CRM UI (check transaction CRMC_UI_NBLINKS). As for the old GUI transactions, you can embedd them also via transaction launcher using CRMC_UI_NBLINKS (search for "transaction launcher" in this forum, there is plenty of information on it).
    Best Regards,
    Yevgen
    Edited by: Yevgen Trukhin on Jun 19, 2008 11:53 AM

  • Integration a Web Dynpro ABAP application within one of my EP overview page

    Hi Experts,
    I've got an issue when integrating a Web Dynpro ABAP application within one of my EP overview pages.
    We've implemented PLM using the Web Dynpro ABAP scenario for employees. Now Iu2019m trying to integrate this into the Employee Self-Service overview page. I've got no issue to make the icon and area title appears, but when I click on it I get a blank page with Error 404. However when clicking on the link in the navigation bar (Level 2) then I get the page fine. So it looks like EP is not able to integrate correctly the Web Dynpro ABAP into the overview page in EP. Is there any specific Resource configuration?
    One more thing is that if I've implemented the same iView using Resources -> Services -> Sub Areas -> Areas everything works fine, but I receive two navigation Levels (Area Group contains the Area Link and when I click it brings me to Sub Area with the single Service Link) I want to avoid this double clicking, calling the application directly from Area Group -> Area link.
    Anyone has ever come across that kind of issue? Has anyone ever integrated a WDA application directly into an overview page?

    Hi,
    We faced a similar problem with BSPs and had to change the definition of the area link type entry.
    I am assuming you have set the area link type to WebDynpro for ABAP and the resource is calling an Iview/page that has the WD ABAP application configured.
    To get around the error, change the Area Link type to Calls a Portal page and make sure the resource calls an Iview/Page that has the WD ABAP application configured.

  • Error in integrating flex with web dynpro abap

    Hi,
    I did integrating   Island Component into Web Dynpro ABAP as per the tutorial given by Thomas Jung.
    Now i'm facing a problem that in that bar chart ,after giving the values in web dynpro table,bars are not getting populated.
    I'm getting X and Y axis populated...only bars are not getting populated..
    plz help....

    hi,
    i'm using flex 4...
    Is it because of that??

  • Is there a way to get Web Dynpro ABAP available in a ECC 5 - NW2004 env?

    We will start developing an offline Adobe interactive form with email functionality for ECC 5 on very short terms. We have to decide asap what client/server configuration we will use for this new functionality. We will also develop an online interactive form and an offline form with upload/download functionality for ECC 5. We will have to setup a client/server configuration that supports all 3 scenario's. 
    The main reason we would like to have NW2004S available for ECC 5 is because we would like to develop the forms in Web Dynpro ABAP instead of Java. Guided Procedures is a "nice to have" too, but not really important at this moment.
    At this moment we think we have 3 options:
    1. Investigate if we can make an Adobe solution in WDA for ECC 5 with our current setup
    2. Upgrade ECC 5 - NW 2004 -> NW 2004S to get WDA functionality available
    3. Install ADS for NW 2004 to be able to create Adobe solutions in ECC 5, then we will have to develop in WDJ
    1. We have the following configuration up and running: NW2004S - CRM 5 and ADS installed: both Java and ABAP stack work properly. We are wondering if we could develop an Adobe interactive form in Web Dynpro ABAP in CRM 5 using BAPI's to retrieve the data from ECC 5 and put it on the form for display or update purposes. Also we have questions about the email functionality: do forms have to be send by email via a mailserver from ECC 5 via CRM 5 and back or can this be done directly from and to ECC 5 or is it not possible at all? Also we don't know if we can develop an online interactive form for ECC 5 via CRM 5. The current setup is not a real option for us right now as we see far too many uncertainties. Does somebody can give us some answers on the possibilities we are looking for?
    2. My assumption is that upgrading ECC5 to ECC6 can be compared with upgrading 46C to ECC5. If my assumption is correct, this would mean an upgrade project with a 6 months leadtime within our company. If my assumption is wrong, please let me know. This upgrade will happen some day, but it has not been planned for 2007. So unfortunately, for us this is not an option at the moment because we cannot wait that long. I was hoping an upgrade of NW2004 -> NW2004s was not that time consuming but I guess this can be compared with a SAP upgrade project like 46C -> ECC 5.
    3. Installing Adobe Document Services for NW2004 is not our preferred solution but we think it is the safest/easiest solution at this moment to get started with Adobe interactive forms for ECC 5 on short terms. We will have to develop in Web Dynpro for Java, so be it.
    WDA is not a must but if we can find a client/server setup which gives us the possibility to build in WDA for ECC 5 functionality, that would be great. That's why I dropped the question on SDN. I want to be sure we choose the best option possible at this moment for us.
    kind regards
    Angelique

    Yesterday I got new information through SDN which sounds very interesting:
    There are technical repository integration points between ECC and the underlying SAP NetWeaver release. To get Web Dynpro for ABAP, you could install a stand-alone SAP NetWeaver 2004s system (without ERP) side-by-side.
    Somebody else wrote: we set up a 3-system landscape of NW04s and have configured single sign on and trusted RFC's so that users can hit the webdynpro pages via the portal, and those systems make the necessary queries to the backend systems via RFC.
    Does somebody know if this stand-alone system could be a proper solution for our situation? Does somebody foresee any problems related to Adobe LiveCycleDesigner or ADS?

  • Shooping cart creation in SRM 7.0 using web dynpro ABAP classes.

    Hi,
    We have recently upgraded to SRM 7.0 from SRM 4.0. We are using customized portal application for the creation of the shopping cart.I am planning to create custom FM which will use the standard Web dynpro ABAP classes to create the shopping cart.
    Could you please guide with the classes that are need to be implemented and the sequence of the classes used in the shopping cart creation.
    I think these are the classes that are used in the standard web dynpro ABAP component.
    CL_FPM_EVENT ->                  Creates an instance of this class based on an event ID.
    CL_BADI_FLT_DATA_TRANS_AND_DB -> Data Handling: Transport and Database.
    CL_EXITHANDLER ->               Class for Ext. Services Within Framework of Exit Technique.
    CL_EX_BBP_DOC_CHANGE_BADI ->     BAdI Class CL_EX_BBP_DOC_CHANGE_BADI.
    CL_BBP_OBJECTS_ACCESS ->         Access Functions for Object Types.
    /SAPSRM/CL_PDO_BO_SC ->          Shopping Cart BO.
    Your expert comments will be appreciated...
    Regards,
    Naresh

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • SRM 7.0 Web Dynpro ABAP Customization

    Hi ,
    Upgrading from SRM 5.0 to SRM 7.0 and would require customization at the Web Dynpro ABAP Component for RFx.
    I need to put a pop-up screen when the Buyer clicks on the "AWARD" button on the Bid Screen. Now I am not able to find the award action/event at the Web Dynpro component level where I have to put the pop-up code and other related logic. I also tried getting into the SPRO and find the class which may contain the AWARD event. Please let me know the solution to this problem. Thank you.
    Manoj

    Hi Akash,
    Thanks for the reply. Can you please guide me through how to go about the enhancement, keeping the original functionality of the Award Button intact. And I understand coding in method of interface is not possible.
    Manoj
    Edited by: MANOJ NACHIMUTHU on Jul 12, 2011 6:33 PM
    Edited by: MANOJ NACHIMUTHU on Jul 12, 2011 6:35 PM

  • Integrating Flex/Flash in Web Dynpro ABAP(Netweaver 7.0) need info!

    Hi all,
            I need to embed a flash or a flex object inside a web dynpro abap application.I am working in Netweaver 7.0 and i don't have enhancement pack 1 installed.Is it possible ?   If it is possible can anyone please provide me the coding and configuration details.
    Thanks,
    Saikat

    I'm afraid that the SAP supplied integration technology - call FlashIslands - is only available from NetWeaver 7.01 and forward.  You could perhaps do some simple integration (very little data transfer) with the iFrame UI element - although the iFrame is deprecated in 7.0 and 7.01, but does return to full support in 7.02.  The other option would be to use the NetWeaver Portal or NetWeaver Business Client and have two iViews within the page. One iView would have WDA and the other some external technology (BSP, JSP, etc) to host the Flash/Flex content.  Not tight integration, but you could potentially use Portal Eventing to at least communicate events.

  • How to configure SSO for web dynpro ABAP (not web dynpro Java)

    Hi Experts,
        I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
    1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
    2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
         procedure"
       Then deleted all logon procedure other than "SSO Authentication" and saved.
    3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
         signal).
    4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
    After all this settings I opened a browser enter above URL and hit enter but there is an error
    There is no login page. It directly showed this error page. No cookies is saving.
    Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
    How to set the for single sign-on?
    Thanks in Advance
    Regards
    Piyush

    Hi Piyush,
    Pls refer below links,
    Single Sign On with ABAP WebDynpro
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
    Regards
    K.N

  • Possibility of Web dynpro ABAP development for SAP R/3 4.7 Version

    Hi Experts,
         I request for information regarding Web Dynpro ABAP. We have SAP R/3 4.7 as back end. And we are going to implement NetWeaver 2004s - Enterprise Portal 7.0 as front end. We are taking development option as Web Dynpro ABAP. Is it possible to do development in Web Dynpro ABAP where you have SAP R/3 version as 4.7.
    Regards,
    Venkat.

    Hi Heidi ,
    Thank you for your reply. I have assigned points to you. Could you pls give any SAP notes which is giving this information
    Regards,
    Venkat.

Maybe you are looking for