Web Dynpro ALV grid column names
Hi,
I wish to specify the text that appears on the column names. At present the name defaults to the field name within the structure. Is there a way to specify the name that i wish to appear for each column? Many thanks in advance
Samir
Hi,
Use the following code
* Instantiate the used component
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_usg_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
lo_cmp_usage->create_component( ).
ENDIF.
* Get Model
DATA lo_interfacecontroller TYPE REF TO iwci_salv_wd_table .
lo_interfacecontroller = wd_this->wd_cpifc_usg_alv( ).
DATA lo_value TYPE REF TO cl_salv_wd_config_table.
lo_value = lo_interfacecontroller->get_model(
*---------- ALV table settings.
DATA: l_table_settings TYPE REF TO if_salv_wd_table_settings .
l_table_settings ?= lo_value.
wd_this->l_table = l_table_settings .
* Set the Editable property to true
l_table_settings->set_read_only( abap_false ).
* Set table header
DATA: l_header TYPE REF TO cl_salv_wd_header.
l_header = l_table_settings->get_header( ).
l_header->set_text( 'Sales Orders' ).
*---------- Column settings
DATA: l_column_settings TYPE REF TO if_salv_wd_column_settings.
l_column_settings ?= lo_value.
* Get columns
DATA: lt_columns TYPE salv_wd_t_column_ref ,
ls_columns TYPE salv_wd_s_column_ref .
DATA: l_column_header TYPE REF TO cl_salv_wd_column_header .
lt_columns = l_column_settings->get_columns( ) .
LOOP AT lt_columns INTO ls_columns .
CASE ls_columns-id .
WHEN 'VBELN' .
l_column_header = ls_columns-r_column->get_header( ) .
l_column_header->set_ddic_binding_field(
if_salv_wd_c_column_settings=>ddic_bind_none ) .
l_column_header->set_text( 'Sales Order' ). " column header
WHEN 'POSNR .
l_column_header = ls_columns-r_column->get_header( ) .
l_column_header->set_ddic_binding_field(
if_salv_wd_c_column_settings=>ddic_bind_none ) .
l_column_header->set_text( 'Item No' ) . "column header
WHEN 'ZMENG'.
l_column_header = ls_columns-r_column->get_header( ) .
l_column_header->set_ddic_binding_field(
if_salv_wd_c_column_settings=>ddic_bind_none ) .
l_column_header->set_text( 'Qty' ). "column header
WHEN OTHERS .
ls_columns-r_column->set_visible(
cl_wd_uielement=>e_visible-none ) .
ENDCASE .
ENDLOOP.
Regards,
Radhika.
Similar Messages
-
Web Dynpro ALV grid column width
Hi,
I have a web dynpro alv grid that has columns titles that are long. What is the best way of displaying the data without taking up too much space with the titles?
For example is it possible to wrap the title into 2 or 3 rows
Thanks,
SamirHi,
DATA: lr_column type ref to cl_salv_wd_column,
lr_colheader type ref to cl_salv_wd_column_header.
CALL METHOD lrcolumn->get_header
RECEIVING
value = lr_COLHEADER.
lr_COLHEADER->set_ddic_binding_field( if_salv_wd_c_ddic_binding=>ddic_bind_short ).
Refer this if_salv_wd_c_ddic_binding in se24 for more.
Regards,
Lekha. -
Web Dynpro ALV grid column colour
Hi,
I have tried to set the colour of a column for my web dynpro alv with the below code but it the colour for this column has not changed - it seems to remain the standard colour. Is there something else i need to do?
DATA: lt_columns TYPE salv_wd_t_column_ref
, ls_columns TYPE salv_wd_s_column_ref
, lr_column TYPE REF TO cl_salv_wd_column
lt_columns = lo_value->if_salv_wd_column_settings~get_columns( ).
LOOP AT lt_columns INTO ls_columns.
IF ls_columns-id CS 'TOTAL_'.
lr_column = ls_columns-r_column.
lr_column->set_cell_design( cl_wd_abstr_master_table_col=>e_cell_design-positive ). "CL_WD_TABLE_COLUMN=>E_CELL_DESIGN-GROUP_LEVEL1
ENDIF.
ENDLOOP.Hi Samir,
You will have to create an attribut WDUI_TABLE_CELL_DESIGN and bind this attribute with the cell design property of the column. Check this wiki link [https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP%20Web%20Dynpro%20ALV%20-%20Change%20Cell%20Colour%20based%20on%20Content], it will solve your issue.
Regards,
Radhika. -
Hi,
I have created an application that uses a web dynpro alv grid. I want to display totals - is there a setting that can do this automatically - if so, can you please tell me how to do this? Thanks,Hi
You can take help of following code snippet to create totals for a particular column
Data: lr_function_settings TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
lr_column TYPE REF TO cl_salv_wd_column,
lt_column type salv_wd_t_column_ref,
ls_column type salv_wd_s_column_ref.
Data: lr_field_amnt type REF TO CL_SALV_WD_FIELD.
* get reference of ALV component
lr_salv_wd_table = wd_this->wd_cpifc_OVERVIEW_EARNED_ALV( ).
wd_this->alv_config_table = lr_salv_wd_table->get_model( ).
* get function settings
lr_function_settings ?= wd_this->alv_config_table.
* display columns in correct order
lr_column_settings ?= wd_this->alv_config_table.
lt_column = lr_column_settings->get_columns( ).
loop at lt_column into ls_column.
CASE ls_column-id.
when 'AMOUNT'
* aggregate field
CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_FIELD_SETTINGS~GET_FIELD
EXPORTING
FIELDNAME = 'AMOUNT'
RECEIVING
VALUE = lr_field_amnt.
* create aggregate rule as total
CALL METHOD LR_FIELD_AMNT->IF_SALV_WD_AGGR~CREATE_AGGR_RULE
EXPORTING
AGGREGATION_TYPE = IF_SALV_WD_C_AGGREGATION=>AGGRTYPE_TOTAL
RECEIVING
VALUE = lv_aggr_rule.
endcase.
Regards
Manas DUa -
Web Dynpro ALV grid filter on date
Hi,
I want to set a "view" on my web dynpro alv grid that uses the current date. Is there a way to specify the current date in the filter values? Thanks,
SamirThanks Thomas. I will certainly look into using POWL in the future.
A related question - Its possible to use a filter by entering something like " .01. " but it doesnt seem to allow me to save that value as its not a date. Is there any way around this? Thanks -
alv grid column name could not be displayed fully.we manually want to drag the column,to see the column name fully. for ex. if column name is 'COMPANYNAME'.it shows 'COMPA' alone.
how could i solve this problem....?hI,
Check the below code...
*& Report ZALV_PROGRAAM
REPORT ZALV_PROGRAAM.
TYPE-POOLS SLIS.
DATA : BEGIN OF WA_KNA1,
KUNNR TYPE KUNNR,
NAME1 TYPE NAME1,
END OF WA_KNA1,
IT_KNA1 LIKE TABLE OF WA_KNA1.
DATA : IT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FCAT LIKE LINE OF IT_FCAT.
SELECT KUNNR NAME1 INTO TABLE IT_KNA1 FROM KNA1 UP TO 5 ROWS.
PERFORM FCAT USING '1' 'KUNNR' 'CUSTOMERNUMBER' '40'.
PERFORM FCAT USING '2' 'NAME1' 'CUSTOMERNAME' '40'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-CPROG
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = IT_FCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_KNA1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form FCAT
text
-->P_0052 text
-->P_0053 text
-->P_0054 text
-->P_0055 text
form FCAT using FP_COL_POS
FP_FIELDNAME
FP_SELTEXT_M
FP_OUTPUTLEN.
WA_FCAT-COL_POS = FP_COL_POS.
WA_FCAT-FIELDNAME = FP_FIELDNAME.
WA_FCAT-SELTEXT_M = FP_SELTEXT_M.
WA_FCAT-OUTPUTLEN = FP_OUTPUTLEN.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
endform. " FCAT
thanks,
Thiru. R -
Web Dynpro ALV grid equivalent of onLeadSelect
Hi,
I am new to web dynpro alv and would like to know how to implement the equivelent of the action onLeadSelect that you can do with a table UIElement, but I want to do this for the ALV table that I have. Many thanks,
SamirHi,
Go to the View's property tab and include you ALV in that.
whenever you instantiate the ALV then in the view, METHODS tab, you can find the Event handler for the lead selection for that ALV. Implement that.
Method name Method type Event
ONLEADSELECT Eventhandler ON_LEAD_SELECT
Check out the links -
Re: click event on ALV
http://www.flickr.com/photos/31042772@N08/3408386623/
Regards,
Lekha -
Hi,
I have a web dynpro alv table that has many columns (about 20) I would like it to be displayed so that the user does not have to scroll right to see all the data.
at the moment columns:
col1 col2 col3 ......col19 col20
i would like the second half of the table under the 1sta half:
col1 col2 col3...col9 col10
col11 col12...col19 col20
Is there any way that i can get the table to be split into two or some other nice way to display without scrolling?You won't be able to do this with a single ALV. I suppose you could have two ALVs and bind them both to the same context. You wouldn't be able to sync the veritcal scrolling between the the two ALVs however. I'm also not sure how usage this design is from a UI design pattern. I would think the acceptible approach would be to use horizontal scrolling within the ALV. You don't have to make the ALV display all columns at once as this can make your entire page very wide and require using the browser scrolling. Instead consider using the set_scrollable_col_count method.
-
Web Dynpro ALV grid sub totals
Hi,
I have managed to get totals working with web dynpro ALV using code like this :
DATA: lr_field TYPE REF TO cl_salv_wd_field.
For total calculations...
lo_value->if_salv_wd_std_functions~set_aggregation_allowed( abap_true ).
lr_field = lo_value->if_salv_wd_field_settings~get_field( 'N_OF_DLRS' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( aggregation_type = if_salv_wd_c_aggregation=>aggrtype_total ).
Please can someone advise how i can do subtotals also. Thanks
Edited by: Samir Vora on Jul 15, 2009 12:40 PMHi,
For creating subtotals, you can have a look at following article:
[Tutorial for Creation Subtotals using ALV|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20abap/tutorial%20for%20creating%20totals%20and%20subtotals%20using%20alv.pdf].
Hope this helps.
Regards
Manas Dua -
WEB DYNPRO ALV GRID : CELL CONTENT - Initial Value
I created a sort of 'Timesheet' in web dynpro...
Unfortunatly, for all days of the month it displays '0.00' as initial value...
Is it possible to not display this initial value or display space/empty ?
In gui alv it is possible, I don't know if it could be done in web dynproHi,
For the node to which the ALV is bound. For the column (context attribute) check the property of the attribute check the formatting propertioes as ZEROS AS BLANKS
for ex: price is the context attrbiute check the properties.
This FORMATTING options for the context attribute is found in the latest verions like EHP4.
Regards,
Lekha. -
Action on selected row in Web dynpro ALV grid
Hello,
i'm pretty new on web dynpro development, and i need some help.
I have a working grid alv and i would like to create an event when i select a row (not editable).
I have looked around and didn't find anything interesting.
Do you have a solution?
Thanks a lot.
CedricHi.,
U have to use onLeadSelection Event Handler.,
Check this tutorial.,: [ALV onLead Selection another ALV|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7020c76f-c40e-2e10-a795-d88e67740ee4?quicklink=index&overridelayout=true]
hope this helps u.,
Thanks & Regards
Kiran. -
ALV Grid Column name in multiple rows
Hi,
When ALV Grid is display columns are displayed horizontally in a single line.
Is there ne way to display the column names in 2 rows
e.g : Functional Location column should be shown as
Functional
LocationHi,
Actually it is not possible to disaply in multiple lines.
ALV grid Multiple Header ... ?
Re: Multiple lines in alv column headings
This problem was discussed many times in this forum, u can search for more results.
Message was edited by: Judith Jessie Selvi -
Filter in web dynpro ALV grid error
The filter in the ALV web dynpro seems to work like *<condition>*. let's say if you have 4 entries in the table 30,230,300,1230 applying the filter value '30' will select all of them making the filter function virtually useless.
Is there a way to change how the filter works?Dear Stanley,
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/63a47dd9-0b01-0010-3d8e-de27242bf011
Regards,
Flavya -
WEB DYNPRO ALV GRID GET SELECTED ROWS...
I'm reusing component ALV Grid ...
How can i get selected rows...Hi Stephan,
In order to get the multiple rows which were selected by the user you will just have to call the get_selected_elements method of if_wd_context_node. So as you can see its no different from how you would get the multiple rows selected by the user in a table ui element. First get the reference of the node which you have used to bind to the ALV & then call this method on it.
METHOD get_selected_rows .
DATA: temp TYPE string.
DATA: lr_node TYPE REF TO if_wd_context_node,
wa_temp TYPE REF TO if_wd_context_element,
ls_node1 TYPE wd_this->element_node_flighttab,
lt_node1 TYPE wd_this->elements_node_flighttab.
lr_node = wd_context->get_child_node( name = 'NODE_FLIGHTTAB' ).
" This would now contain the references of all the selected rows
lt_temp = lr_node->get_selected_elements( ).
LOOP AT lt_temp INTO wa_temp.
" Use the references to get the exact row data
CALL METHOD wa_temp->get_static_attributes
IMPORTING
static_attributes = ls_node1.
APPEND ls_node1 TO lt_node1.
CLEAR ls_node1.
ENDLOOP.
ENDMETHOD.
Hope this helps resolve your problem.
Regards,
Uday -
Web Dynpro ALV grid navigation problems when entry is selected
Hi,
We have implemented support packs 19 and 20 and following this, we are having the following side effect :
When you click on an entry within an alv grid, it does not navigate to the next screen. It worked fine before the service packs, please advise if you have any suggestions as to how we can get it to work again!? Thanks in advance.
When I click, the debug does not event go to the ON_LEAD_SELECT event.
Edited by: James Wilson on Dec 10, 2009 3:52 PMHi Samir,
I think possibly you have other code which is relying on a lead selection being set in the context that you have provided to the ALV grid?
And it is that code that is falling over?
In this case I think you need to handle in that other code the possibility that the user/ALV grid will unselect all entries in the table.
Or am I misunderstanding your issue? Please do let us know,
Thanks,
Chris
Maybe you are looking for
-
Animated gif from .ICO files - Indicates layer is partially locked
thanks for helping the non-graphics newb out... trying to create my first animated gif. I have 8 .ico files that i converted to .png to open them. once all are open i try to combine into one file with 8 layers but am unable to do it!?!? If I click on
-
Brand New MacBook Air 2012 Fan Always On with Only a Few Programs Open!
Got this awesome machine a few days ago. Everything is perfect except the fact that the fans are on 24/7! I have nearly no applications running and I've cheked the activity monitor and nearly everything is at 0% and the programs that aren't are aro
-
HT4528 if i forgot my lock password how can i unlock my phone
If i forgot my lock password on the main screen how can i unlock the phone
-
Trouble grouping years into decade groups
Hello. I have encountered a problem with a pivot table (PT ) used to create a demo dashboard for snowfall data at a ski resort. My data is in an Excel Table beginning with column 'Season' (1970, 1971, 1972, etc. through 2014). Each column to the ri
-
ABOUT query not affecting results or not using knowledge base
Hello again, Another question here, I've searched through the forum and have found other posts on the same problem but no solutions, though the problem isn't always the primary topic of the forum. I've put this post up to hopefully put this to rest a