Web Dynpro application does not apply portal theme

Hi Guys,
We created a new portal theme and assigned it to our users. The portal desktop gets assigned succesfully and portal applications also show the new theme colors. But all web dynpro pages still show in the blue SAP theme. This issue only occurs on our development portal, when we import the same theme on our test portal is all works fine.
I also tried to assign the WebDynpro parameters "sap.useWebDynproStyleSheet" and "sap.theme.default" and then the web dynpro applications are indeed forced into the portal theme. However, that is no soluition since all web dynpro applications then use the theme including SAP applications like the NetWeaver Administrator.
We looked at OSS note '1446099 - Web Dynpro application not displayed
in customer theme' but the stylesheets are not different.
sap portal sytlesheet: UR=7.31.0.14.1
Web Dynpro Style sheet: UR Version=7.31.0.14.0
The portals in which the theme does work have the same stylesheet versions as mentioned above.
We also created an OSS message for this so if we solve it that way I will update this message. But if there is anyone on this forum that might have an idea that it would be highly appreciated. If the problem takes too long to solve we will perform a refresh from a portal that works but I hope that we will be able to find the reason of this behavior.
Kind Regards,
Nico van der Linden...

In theory, these versions should work correctly.
You can compare the patch levels applied on your dev portal and test portal - specifically compare the version/patch for the component EPPSERV*.SCA - and see if you have any differences there.
Thanks,
Shanti

Similar Messages

  • Web dynpro application does not exist

    hello,
    I wanted to ask reagrding the above error I am facing, I get an error message when I try to test the web dynpro service in the SICF.
    Get an error message additionally"RABAX_STATE".
    Previously my web designer was working and now it doesnt work when I try to view the webdynpro. Its greyed out.
    I was able to see all the icons etc. to work ´with the web designer and now desappeared.
    When I look into the details I see also that the domain is not correctly setup.
    It was working previously and now something chnaged and dont see anymore.
    Is it depending on the windows setting or.....
    Please advice.
    Thanks

    The FQDN was setup, however, the problem is when I save it go back after giving in the Domain name or Host name similar to
    my PC and .de in the end and have also activated the V2 DEFAULT, I restart the server and go back to display the ZDEFAULLT to see icm/.............and cannot find this and the chnages were not saved as I had originally performed. Its still showing the same DBHOST......etc...

  • Input field in Web Dynpro ALV does not have correct focus

    Hello Friends,
    Our client's SAP system is recently upgraded with ECC 6.0 SP 18.
    After that the focus in the editable field of Web Dynpro ALV does not working properly by down arrow navigation.
    The common scenario:
    The ALV has more than one rows and one column is editable...
    when user is selecting field of first row and making some entries...
    after that pressing down arrow it is going to next row and coloring the field like focusing...
    but the 'cursor' is not blinking so user can not make entry without clicking by mouse...
    this was working Ok before upgrade...
    Could you please anyone have a look and propose a suitable solution?
    Thanks
    Krish

    Hello,
    The problem was with Javascript....which play an important role in layout of web dynpro ALV...
    which resides in MIME repository -> SAP ->PUBLIC - >BC ->NW5 ->JS ->SAPURI_Ie6....
    We wrote to SAP for giving us the fix...
    after we got a new file from SAP the problem is solved...
    also we have to clear server cache through SMICM and client cache...
    Thanks.
    K.

  • ERROR: Web Dynpro component does not exist

    Hi!
    Trying to open different menu items in PPM I get browser with error:
    500 SAP Internal Server Error
    ERROR: Web Dynpro component does not exist (termination: RABAX_STATE).
    Url looks like: someurl.com:8010/sap/bc/webdynpro/sap/inm_workcenter_app?IV_APPL_TYPE=RPM&IV_OBJ_TYPE_R=RPH&IV_POR…
    How can I fix it?

    Hi Maxim,
    Refer the SAP note in the below thread.
    ERROR: Web Dynpro component does not exist (termination: RABAX_STATE)
    Regards,
    Ravi

  • GP, callable object Web Dynpro Application (bespoke) not appearing in list

    Hey y'all
    We're developing our first GP, and we would like to call an existing bespoke Web Dynpro. When creating the callable object, we're selecting type Web Dynpro Application, but our Web Dynpro screen is not appearing in the drop down list on the next page. We think that this is because the application has been deployed to a different server (i.e. it has not been deployed onto the portal server).
    So the question is, has anyone faced this problem before, and is there a solution?
    Kind regards
    Jon

    Hi John,
    Please have a look at this Exception on creating GP Action
    This will solve your issue definitively. Do not take care of a given SDA, just redeploy everything and make sure that everything is overwritten by selecting the right option.
    Best regards,
    David

  • Web Dynpro Application is not openeing from Portal UWL

    Hi,
    I have developed a WD application which is integrated in the portal. This WD application navigates through several levels of approval by triggering the workflow. Initially USER will create the request launching the WD application from portal and upon clicking the SUBMIT button -> Workflow will be triggered and Work item will be sent to Approver UWL list in the Portal.
    Link will be displayed in the UWL list and upon clicking that link WD application need to be opened where the details will be displayed and can approve the request by clicking on APPROVE button.
    Here, We have created a PFCG role which can be assigned to USER to access the WD application to create the request from portal. But for Approvers, we have not assigned any such roles except UWL role.
    Workflow is working fine, Workitem is displayed in Approvers UWL but when they click on the link -> WD Application is not opening. Configuration in SWFVISU is done.
    I think we are missing some roles which need to be assigned to Approvers. We cross checked by assigning SAP_ALL profile to the Approers and found WD application is getting opened and everything is working fine. But we are not supposed to give SAP_ALL in the PRD.
    Please help what are the other roles that need to be assigned to Approvers.
    Thanks,
    Bharath.

    did you try by assigning pfcg roles to approvers along with Uwl?
    Regards
    Srinivas

  • Updating extended fields in SRM Business Partner Web Dynpro UI does not work

    Hey community,
    I'd like to extend the SAP SRM Business Partner Web Dynpro (SRM 7.13). I did it like in SAP Note 1386310 described. Everything works fine, the fields show the correct data. But updating these fields does not have any effect.
    I only want to extend the existent fields NAME_ORG3 and NAME_ORG4. I did the following steps:
    - Because of the fact that the fields are existent and not custom, I skipped the extension of structures INCL_EEW_BUT000 and INCL_EEW_BUT000_X (ok, in utter despair I even tried this, but of course I got the message "fields already exist...")
    - I added the 2 fields to the SRM business partner data transfer structure INCL_EEW_BP_CSF_COMPANY_DATA.
    - In Web Dynpro /SAPSRM/WDC_MODC_NAME, view V_PS_OIF_NAME I added the fields NAME_ORG3 and NAME_ORG4 to the context node COMPANY_DATA
    - I added corresponding Input fields and labels to the WD layout.
    - in view /sapsrm/v_mdfsbc I customized the new fields
    -> the new fields are visible in the WD, and, oh wow, they even show the correct data!
    -> Unfortunately, updating the fields does not work, but000 does not get any data.
    Debugging the function "bupa_central_extincl_change" brings up, that function BUP_MEMORY_BUT000_GET gets a but000 structure with filled NAME_ORG1 and NAME_ORG2, but NAME_ORG3 and NAME_ORG4 are empty.
    I also regarded SAP Note 1453747, but the code was already right.
    Any Ideas? Many thanks in advance!
    Steffi

    Hi  Stefanie Krause,
    I am also facing the same problem
    I added the one fields "APPROVAL_EMAIL” to the SRM business partner, data transfer structure '/SAPSRM/S_CLL_BP_COMPANY_DATA ' . I have appended the structure.
    I added corresponding Input fields and labels to the WD layout.
    -> the new fields are visible in the WD,
    -> i am able to visible the input field in WD,
    But if add some value press on next tab and back to the screen the value will be refreshed .
    Kindly help me
    Thanks and Regards,
    Maruthi.M

  • View ui layout in sap ecc for web dynpro applications is not loading

    hi experts,
    I have an issue while creating a view in WDA.
    I can see the View pane with buttons & properties, but when i'm trying to insert an element, error occurs.
    Is it the prolem with IE (my IE version is 7.0.5730.13 ) or GUI or something else ?
    Can you please help me out to solve this issue.
    regards,
    prabhanjan
    Edited by: prabhanjangeevanagari on Oct 3, 2011 9:39 AM

    Those are all script errors, also check for the hosts entry for the server details that you are working on. Check with the basis team, before that in Drivers\etc\hosts file you should have an entry for this server that you are working on.

  • How to make use of Portal service in the web dynpro application

    hi
    I have some portal service and how to use that in the web dynpro application.
    and also what is the main diff between Portal Component and web dynpro application.
    do we required portal to run web dynpro application.
    thanks
    mmukesh

    Hi,
    >> I have some portal service and how to use that in the web dynpro application.
    Yes. U can use Portal service in webdynpro. Check the link given by subathra.
    >> and also what is the main diff between Portal Component and web dynpro application
    Portal Components are components designed to run in portal server while webdynpro application can run in J2EE WebAS.
    >> do we required portal to run web dynpro application.
    No for general cases. Just WebAS is sufficient to run webdynpro appl. But if u use portal service in ur webdynpro appl, then make sure both (portal service and webdynpro appl) run on same J2EE engine. That is mandatory.
    Regards,
    Vijai

  • Webdynpro application not taking Portal Theme

    Hello,
    Our webdynpro applications are not taking portal themes. How can we have the applications take the portal themes?
    Regards
    Bobu

    Hello,
    When creating a portal IView for a webdynpo application we will have a property called as Supply portal style sheet. If this property is set to Yes then the webdynpro applications will take the Portal style sheet.
    Regards,
    Raju Bonagiri

  • Cannot deploy web dynpro applications

    Hello,
    I'm starting to develop web dynpro applications, and I can run them on the nwds, but I cannot deploy them to the SDM, i always get the following error:
    /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [003]Deployment aborted
    Settings
    SDM host : myserver
    SDM port : 50118
    URL to deploy : file:.../Temp/temp53918Welcome.ear
    Deployment exception : Server myserver did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server myserver at port 50118: No route to host: connect
    Inner exception was :
    Server myserver did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server myserver at port 50118: No route to host: connect
    I have installed Sneak Preview SAP NetWeaver 2004S SR 1, i can access the  enterprise portal with no problems.
    I would be appreciate if anybody could help me with this issue.
    Regards,
    Leandro Fonseca

    At the same time if more users are deploying then you may such 'deployment aborted' errors check if there are more child instances for the J2EE engine.If not ask your basis administrator to create more child nodes to balance the load on the server instance.Also You can find out the server details at
    "http:
    <hostname:portnum>\index.html"select system configuration-you can get the details of the SDM and the j2ee engine from there.You need to have proper credentials to get the information from the above url.
    Provide those details in the NWDS.

  • Basic question on a web dynpro application

    Hi All,
    I am new to NWDS 2004 and I just executed my first web dynpro application that is on https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/a-c/creating your first web dynpro application.pdf
    I have couple of questions
    1. when i click the back button the text that was entered in the Start view is visible even after I hit the back button in the result view. Can you tell me how to keep the input field empty in the start view after hitting back button?
    2. After deploying the Web Dynpro application, where from the Portal, can i assign this web dynpro application to a user .
    Thank you
    Regards
    Luke

    Try putting adding this code to your onActionBack method.
    public void <b>onActionBack</b>(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionBack(ServerEvent)
    <b>String headerText = " ";
    wdContext.currentContextElement().setHeaderText(headerText);</b>
    wdThis.wdFirePlugToStartView();
    //@@end
    REgards,
    RIch Heilman

  • Not able to run web dynpro application from portal.

    Hi portal experts,
    I want to run my web dynpro application from portal.
    So created a seperate iview  and a role  for the purpose.
    Assigned the iview to the role and also mapped a abap user id to the new role created.
    But when I click on 'preview'  the iview , getting the following dump.
    Error when processing your request
    What has happened?
    The URL http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ was not called due to an error.
    Note
    The following error text was processed in the system HRM : Die URL enthält keine vollständige Domainangabe (mnghcmsap statt mnghcmsap.<domain>.<ext>).
    The error occurred on the application server mnghcmsap_HRM_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: CHECK of program CX_FQDN=======================CP
    Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HRM in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server mnghcmsap_HRM_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server mnghcmsap_HRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 200 -u: INF51515 -l: E -s: HRM -i: mnghcmsap_HRM_00 -w: 0 -d: 20110209 -t: 121224 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please let me know if I am doing the process correctly and also let me know if I am missing somthing.
    Thanks,
    Aditya.

    Are you able to run teh web dynpro application independtly i.e. without creatin an iview.
    http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ by using this link.
    or there also you are getting the error.
    i guess there also you should be gettign the error.
    this is some problem with the FQDN settings in the abap system.
    in the host name of the web dynpro applciation server one .(dot) is must.
    so you might have to change the host name to some thing like mnghcmsap. from mnghcmsap
    thanks
    sarbjeet singh

  • Java Dynpro does not used portal default theme.

    Dear Expert,
    We have recently upgraded our support pack and everything works fine except the portal theme. We have our customize portal theme and we make it as the default portal theme. Everything looks fine with the portal where the customize theme is loaded. However when I call up some standard Java Web Dynpro application such as the Overview page or Leave Application, it is using the SAP default template (SAP_TRADESHOW). So it is a bit wierd where each part of the portal is using our customize theme but the content area where the Java Dynpro is loaded is using the SAP default theme.
    When i am trying to view the source of the content area (Overview Page). It is showing something like this.
      <link rel="stylesheet" type="text/css" href="../../../resources/sap.com/tc~wd~dispwda/global/SSR/themes/sap_tradeshow/ur/ur_ie6.css">
      <style type="text/css">
        .hidden {
          position: absolute;
          top: 0px;
          left: 0px;
          margin: 0px;
          border: 0px;
          width: 0px;
          height: 0px
      </style>
    When I compare it with my production (before the support pack upgrade and everything is fine), the code are as below.
      <link rel="stylesheet" type="text/css" href="/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/ACNTHEMEI/ur/ur_7.0_ie6.css?7.0.13.1.0">
      <style type="text/css">
        .hidden {
          position: absolute;
          top: 0px;
          left: 0px;
          margin: 0px;
          border: 0px;
          width: 0px;
          height: 0px
      </style>
    Anyone know how to default the standard Java Dynpro to use the customize portal default there?
    Thanks.
    Regards,
    Bryan.

    Brian,
    WebDynpro application will not use the protal theme.
    Thanks,
    Hamendra

  • Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

    i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality  i got one message
    ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
    whenever i saw  sicf  transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

    Hi Ashok,
                   for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
                  Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
    then go to SICF  t.code .. sap->bc->webdynpro->sap->find  out your application and activate the service of your webdynpro application.
    Now test it ... this solution might helpful to you .
    Regards,
    Naveen M

Maybe you are looking for