Web dynpro application not available when running iview wizard

When I run the iview wizard to create a web dynpro iview I find the folder local/<MyProjectName.
But when opening myProjectName folder the Application is missing, so I cannot create the iview.
When running the web dynpro Content Administrator I find the application in the ProjectName folder, but when I try to run it I get the exception:
com.sap.tc.webdynpro.repository.utils.RepositoryException: Did not find application 'MyTestApplication' in repository.
What could be the issue?
B.r
Olof

Hi Siva,
I tried this but it still doesn't work for me:
I get this error
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Cannot open repository for application 'MyApplication'.
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.isAuthenticationRequired(ClientUserFactory.java:316)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.checkAuthentication(ClientUserFactory.java:244)
     at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.checkAuthentication(WDClientUser.java:217)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.checkAuthentication(RequestManager.java:626)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:144)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.repository.utils.RepositoryException: Did not find application 'MyApplication' in repository.
     at com.sap.tc.webdynpro.serverimpl.core.repository.AbstractServerRepository.getApplicationInternal(AbstractServerRepository.java:167)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.isAuthenticationRequired(ClientUserFactory.java:307)
     ... 22 more
Edited by: Olof Trönnberg on Aug 20, 2009 12:42 PM

Similar Messages

Web Dynpro applications not working on ECC 6.0 IDES

Hi,
I'm new to Web Dynpro and developed a custom Web Dynpro (including the application) on a ECC 6.0 IDES system. It's simple with a couple of input fields. When I test it (either via SAP GUI 7.1 or 7.2, or Web GUI), it appears on the browser ok but the screen is frozen. I can't enter anything into the fields, etc. I also tested SAP Web Dynpro applications and they act the same way, frozen screen. There aren't any errors displayed or any runtime errors in ST22. Please advise. I searched this forum but didn't see any issue similar to mine. The IDES vendor suggested I post the issue on SDN.
John

I guess it has do to with some sort of browser's font size or view settings.
press ctrl +0 make the zoom 100% and font size medium and try again.
thanks
sarbjeet singh

Crystal report parameters not available when running from within SAP B1

Hi
I have found this problem a few times already and I think it is now about time I find a solution for it.
On my latest Crystal report, I have 2 parameters.
The 1e is a dynamic parameter, allowing the user to select multiple groups.
The 2nd is also a dynamic parameter, allowing the user to select only a single item.
These parameters works fine in Crystal and do what they are supposed to do.
After publishing the report in SAP Busines One (SBO) and viewing it from within SBO, the 2 parameter prompts are still there but without the dynamic list to select any data from.
On a previous report where a parameter has been defined as "Any value can be entered for the parameter" once again worked fine in crystal but from within SBO the parameter allowed no value to be entered.
Have anyone got a solution for this.
Regards
Burger

Sorry guys
You have lost me. I have searched the form and I have worked through the whole pdf you suggested.
I have no idea what I am supposed to do or see or use "ItemGroup@ SELECT ItmsGrpCod, ItmsGrpNam FROM OITB ORDER BY ItmsGrpCod"
As a test I created a test report with the following parameters to test how it would present itself in B1
1.     A static parameter with no list. Allow custom Values = True, Allow Multiple Values = True u2013 B1 result. A box that I could enter anything. Defeating the object as I wanted a list of valid options
2.     A static parameter with no list. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. A box that I could enter anything. Defeating the object as I wanted a list of valid options
3.     A static parameter with a list. Allow custom Values = True, Allow Multiple Values = True u2013 B1 result. A box that I could select multiple values from a list. I could not add my own value. Defeating the object as the list is static
4.     A static parameter with a list. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. A drop down box where I could select one of the values. Defeating the object as the list is static
5.     A static parameter with a list. Allow custom Values = False, Allow Multiple Values = False u2013 B1 result. Same as in point 4
6.     A Dynamic parameter. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. Same as in point 1 & 2. No Dynamic list returned and can not add own option
As mentioned. All the parameters work in Crystal as one expect it to. What I am after is what should I change in B1 so that the report works the same as in Crystal.
Where in B1 should it be changes and to what should it be changed.
If the changes should be done in crystal to cater for B1 then what should be changes where to what
I am not that familiar with B1.
In my test report I use B1 table OITM.
My parameter is Item (Crystal syntax {?Item}) and I use it in a filter to say {OITM.ItemCode} = {?Item}
Regards
Burger

Create iView for Web Dynpro Application

Hi guys,
I've created a Web Dynpro Application via NWDI and deployed to the j2ee server. Now, I'm trying to create an iView to link to that application. The steps I've done are:
1. Create iView for Web Dynpro Application
2. Select "Create iView from each application View"
3. Select my application.
That's when the error occurs at step 3. I select my application and click next, but an error msg keeps appearing telling me to "To continue, select at least one application" despite having already done so. Can anyone enlighten me on this? Thanks!
ZHenmin

Hi,
First make sure the applications runs fine standalone. Also the versions for WAS and EP are maintained correctly. Actually, this error seems to be occur for many users. Check this thread too.
Open new Web Dynpro iView in EP7
If nothing works, restart the server and try creating the iView again.
Regards,
Harini S

Web Dynpro application does not apply portal theme

Hi Guys,
We created a new portal theme and assigned it to our users. The portal desktop gets assigned succesfully and portal applications also show the new theme colors. But all web dynpro pages still show in the blue SAP theme. This issue only occurs on our development portal, when we import the same theme on our test portal is all works fine.
I also tried to assign the WebDynpro parameters "sap.useWebDynproStyleSheet" and "sap.theme.default" and then the web dynpro applications are indeed forced into the portal theme. However, that is no soluition since all web dynpro applications then use the theme including SAP applications like the NetWeaver Administrator.
We looked at OSS note '1446099 - Web Dynpro application not displayed
in customer theme' but the stylesheets are not different.
sap portal sytlesheet: UR=7.31.0.14.1
Web Dynpro Style sheet: UR Version=7.31.0.14.0
The portals in which the theme does work have the same stylesheet versions as mentioned above.
We also created an OSS message for this so if we solve it that way I will update this message. But if there is anyone on this forum that might have an idea that it would be highly appreciated. If the problem takes too long to solve we will perform a refresh from a portal that works but I hope that we will be able to find the reason of this behavior.
Kind Regards,
Nico van der Linden...

In theory, these versions should work correctly.
You can compare the patch levels applied on your dev portal and test portal - specifically compare the version/patch for the component EPPSERV*.SCA - and see if you have any differences there.
Thanks,
Shanti

How to change the Portal Password using a link from Web dynpro application

Hello Everybody,
I have a requirement to change the user password from a web dynpro application which is available on a mobile device. Firstly User will log into the portal through a mobile device and after getting authenticated user will be redirected to the mobile application. Within this mobile application there will be a link to change the login password(Portal login). Can somebody tell me how can i change the portal login password from a link available within the mobile application. Looking forward for a suitable reply.
Thanks to all,
Regards,
Saby.

Hi Maksim,
Thanks for your reply..but i would also like to know can we directly use the Change Password Iview "persoUserPassword" from the portal. Can i directly Pass the URL of this iview from the portal to a "Change Password" link in the web dynpro application, so that when the user click this link he should be able to see this Iview on his/her mobile device and should be able to change the password from there. But i dont know whether this iview will appear properly on the mobile device or we have to have a custom web dynpro application for this purpose...Please reply with a suitable answer.
Thanks in advance.
Regards,
Sarabjeet Singh.

Error while deploying the Web Dynpro application

HI All,
I have developed a Web dynpro application. Now when I am deploying the application I am getting an error.
Description
Jan 8, 2008 2:14:12 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
Can any one please help me regarding this.
Regards
Neha

Hi Neha,
It seems that there is problem with your SDM server. It seems that during J2EE engine configuration SDM server is not configured. Actually this configuration is done by Basis Team.
By the way try out your Server setting:
Go To:: Windows -> Preferences -> SAP J2EE Engine
[Mention the required details over there]
And Check whether you are getting Active SDM Server under J2EE Engine.
Regards,
Nittin Garg

Cannot deploy web dynpro applications

Hello,
I'm starting to develop web dynpro applications, and I can run them on the nwds, but I cannot deploy them to the SDM, i always get the following error:
/userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[003]Deployment aborted
Settings
SDM host : myserver
SDM port : 50118
URL to deploy : file:.../Temp/temp53918Welcome.ear
Deployment exception : Server myserver did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server myserver at port 50118: No route to host: connect
Inner exception was :
Server myserver did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server myserver at port 50118: No route to host: connect
I have installed Sneak Preview SAP NetWeaver 2004S SR 1, i can access the enterprise portal with no problems.
I would be appreciate if anybody could help me with this issue.
Regards,
Leandro Fonseca

At the same time if more users are deploying then you may such 'deployment aborted' errors check if there are more child instances for the J2EE engine.If not ask your basis administrator to create more child nodes to balance the load on the server instance.Also You can find out the server details at
"http:
<hostname:portnum>\index.html"select system configuration-you can get the details of the SDM and the j2ee engine from there.You need to have proper credentials to get the information from the above url.
Provide those details in the NWDS.

Web Dynpro Application 'Explorer' has expires,

Hi,
In one of EP system is giviing below error while using. If I refresh page is loading fine. But very frequently we are getting this errro, can anyone help on this problem.
error message is showing as below:
500 Internal Server Error
SAP J2EE Engine/6.40
The Web Dynpro Application 'Explorer' has expired. Please restart the application either with the refresh button or click the following link Explorer.
Details: No details available
regards,
Hari,

Note 842635 - Session Management for Web Dynpro Applications
Note 1286976 - Caching of data in Web Dynpro

Starting existing workflow from web dynpro application (ABAP)

Hi experts,
    I am working on web dynpro application from which when I click on a button an existing workflow should trigger. This will be used in portal replacing existing iview with jsp. I did lot of reading on SDN maybe too much that I am confused how to get started. Here is what I have currently.
We have an existing workflow that sends an approval email to manager when ever some unit information changes. In current functionality, workflow is triggered by event which is linked to workflow in transaction "swetypv". We defined scenario in "qisrscenario" that contains all elements to populate workflow container. The methods to get data into workflow container, send email etc are all written in business object methods. We have a class that implements standard SAP BADI "IF_EX_QISR1"(IF_EX_QISR1~SCENARIO_PROCESS_USER_COMMAND method) that probably has all logic. In current functionality when the workflow gets created it sends notification number back to portal jsp page that triggered the workflow on button click. Users look at notification number in iqs23 for workflow log, PCR form data etc. and I need that functionality too. Now I am confused where I should start so that I can use ew web dynpro applciation instead of jsp iview but want all the functionality that we currently have. How can I start workflow and get notification number back to web dynpro so that I can display that to user? The approving manager goes to UWL to approve, reject the workitem and workflow then finishes.
Any help will be greatly appreciated.
Thanks.
Mithun

Hi.,
Using FM SAP_WAPI_CREATE_EVENT You can Achieve this., try the below piece of code.,
DATA: OBJECT_TYPE TYPE SWR_STRUCT-OBJECT_TYP VALUE 'ZBUS333',   " Enter Your Business Object here
OBJECT_KEY TYPE SWR_STRUCT-OBJECT_KEY,
EVENT TYPE SWR_STRUCT-EVENT VALUE 'FIRE'.     " Enter Your Event here
   DATA: lt_cont TYPE STANDARD TABLE OF swr_cont,
         ls_cont TYPE swr_cont.
       ls_cont-element = 'NAME'.       " To Pass Values to business Object you append to container
       ls_cont-value   = lv_name.
       APPEND ls_cont to lt_cont.
       ls_cont-element = 'ID'.
       ls_cont-value   = lv_id.
       APPEND ls_cont to lt_cont.
      CALL FUNCTION 'SAP_WAPI_CREATE_EVENT'
        EXPORTING
          OBJECT_TYPE             = OBJECT_TYPE
          OBJECT_KEY              = OBJECT_KEY
          EVENT                        = EVENT
         COMMIT_WORK             = 'X'
         EVENT_LANGUAGE          = SY-LANGU
         LANGUAGE                = SY-LANGU
         USER                    = SY-UNAME
*         IFS_XML_CONTAINER       =
*       IMPORTING
*         RETURN_CODE             =
*         EVENT_ID                =
       TABLES
         INPUT_CONTAINER         = lt_cont
*         MESSAGE_LINES           =
*         MESSAGE_STRUCT          =
hope this helps u.,
Thanks & Regards,
Kiran

Need to create a Web Dynpro Application for SRM Portal

We need to recreate the start page for SRM Portal - (Supplier Self-Services) - without any images (as was delivered out of the box) - basically we need to break it down into 4 iViews: All Purchase Orders; All Sched Agreement Releases; All Invoices and Credit Memos; and Account History. All these iViews contains links.
How would one create a Web Dynpro Application to create the above iViews?
Regards,

Hi zhang,
take a look to this:
KM:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/kmc/resource%2band%2bcollection%2bversioning%2busing%2bkm%2bapis
https://help.sap.com/javadocs/NW04S/SPS09/km/index.html
Excel:
/people/subramanian.venkateswaran2/blog/2006/10/02/enhanced-file-upload--uploading-and-processing-excel-sheets
Hope this help you.
Vito

Not able to run web dynpro application from portal.

Hi portal experts,
I want to run my web dynpro application from portal.
So created a seperate iview and a role for the purpose.
Assigned the iview to the role and also mapped a abap user id to the new role created.
But when I click on 'preview' the iview , getting the following dump.
Error when processing your request
What has happened?
The URL http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ was not called due to an error.
Note
The following error text was processed in the system HRM : Die URL enthält keine vollständige Domainangabe (mnghcmsap statt mnghcmsap.<domain>.<ext>).
The error occurred on the application server mnghcmsap_HRM_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HRM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server mnghcmsap_HRM_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server mnghcmsap_HRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: INF51515 -l: E -s: HRM -i: mnghcmsap_HRM_00 -w: 0 -d: 20110209 -t: 121224 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please let me know if I am doing the process correctly and also let me know if I am missing somthing.
Thanks,
Aditya.

Are you able to run teh web dynpro application independtly i.e. without creatin an iview.
http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ by using this link.
or there also you are getting the error.
i guess there also you should be gettign the error.
this is some problem with the FQDN settings in the abap system.
in the host name of the web dynpro applciation server one .(dot) is must.
so you might have to change the host name to some thing like mnghcmsap. from mnghcmsap
thanks
sarbjeet singh

Web Dynpro application callable object error: Page Builder Not available

Hi, SDN Fellow.
I created a callable object of Web Dynpro application. The callable object is atatched to an Action, and Action --> Block, and Block --> Process.
I initiate the process in GP Runtime, when it comes to the Action screen the Web Dynpro application atatched to, I got the following error:
The page builder required to display this application UI inside the portal environment is not available.
As aa comparison, another callable object that atatched to a Web Dynpro component (that implement GP interface) is working fine.
Please advise.
Thanks in advance,
KC

Hi KC,
When you start your process from GP Runtime, does the actual action/callable object open in a new window?
Have a look at this SAP Note:
[Error when executing a GP task - Page builder|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_gp/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393831353137%7d]
Although the error message you are getting is different, but if your callable object opens in a new window, then the problem (in most probability) is the same as mentioned in the SAP Note.
Also, try testing the Web Dynpro callable object in standalone mode. For more information on this, see:
[Testing Callable Objects|http://help.sap.com/saphelp_nw04s/helpdata/en/4c/588041a17e060de10000000a1550b0/frameset.htm]
Bye
Ankur

Could not run Web dynpro application

Hi
I am having ECC 5.0, now I am trying to run Web Dynpro application which is already existing,I could not run this application. In SE84 that applications are available, but in SE80, not showing. Please suggest me what could be the reason.

guess u need ECC6 for Webdynpro.For more info plz chk this link:
Web Dynpro for ABAP
Edited by: Kalyan Chakravarthi on Jan 30, 2009 11:28 AM

Getting error "Access via null" when running the web dynpro application

Hi experts,
I am getting the below error while executing my web dynpro application
500 SAP Internal Server Error
ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE)
I am getting the error only when I am calling a method create manufacturer from my web dynpro program. If i comment this code my application works fine
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
    gi_manufacturer = ls_manufacturer
IMPORTING
    lv_message      = lv_status
i have created a attribute mo_ch_instance of type YSRM70CL_CH_SW_MD where YSRM70CL_CH_SW_MD is the class which has the create_manufacturer method that i am using in my code.
Kindly let me know whats the issue.
Regards,
Vinod

Hi,
if   wd_this->mo_ch_instance is not initial.
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
gi_manufacturer = ls_manufacturer
IMPORTING
lv_message = lv_status
endif.
Check wether you have created the object for that class r not.
Regards,
Lekha.

Web dynpro application not available when running iview wizard

Similar Messages

Maybe you are looking for