Web dynpro component name

Dear All, From the Portal how can we find the web dynpro component name.

Hi Simpu,
Your question is not really clear to me, but anyhow, I expect that it is if one can determine "what" is called (technically) if a WD iView is called from within the portal.
All you can determine is given in the corresponding WD iView and it's parameters, see http://help.sap.com/saphelp_nw70/helpdata/en/11/0d653f0c9fa075e10000000a114084/frameset.htm
Hope it helps
Detlev

Similar Messages

Copying a web dynpro component

Hi All..
I want to copy the web dynpro component. I have saved it as local object.It contains two windows and some four views.When i try to copy this component, it is getting copied, but when i try to create the "web dynpro application" of it, it is asking for "Interface View " and plug name . If i press f4 it shows "The Web Dynpro component "name of component" does not contain
interface views"
Plz help.

Hi Muzammil Bichoo ,
when you copy the wda component, it will be copied and will be in active state, once all the components are activated means, windows, views, everything will be available.
now create application for your component, if you have more than one window(interface view) select the one which you need for the application.
Regards
Sarath

SRM 7.0 find transparent table name from Web dynpro Component

Hi ,
I am trying to find the transparent table name from Web dynpro component dictionary structure. I am working in SRM 7.0. Please let me know how to find the transpartent table for a field.
Thanks,
Monica

hi,
your question is very unclear and does not relate to performance.
SRM uses webdynpro ABAP so the recommendation will not help.
Do you need a technical UI element?
Or the application table where the business data of an UI is stored???
If it is the later, then you can use the SQL trace, change to element you are interested in, and trace it. The table should appear in the trace in connection which an UPDATE command. Still a bit cimbersome.
Siegfried

Calling session bean's business method through web dynpro component

Hi All,
Can anybody tell me how to call a session bean's methods through a web dynpro WITHOUT java-model or web service model ??
I have following scenario:-
1. Stateless Session bean having two business methods
2. Web Dynpro component
3.Now i want to call business methods without using any model. I have got following piece of code but I dont know how to go about it.
4.Where do i have to set JNDI name for session bean? which interface will be looked for?
5. Do I have to declare public part for EJB DC? If yes, how?
//This is inside web dynpro component
InitialContext context = new InitialContext();
o = context.lookup(JNDIName);
TestSessionbeanHome homeRef = (TestSessionbeanHome) PortableRemoteObject.narrow( o,
TestSessionbeanHome.class);
TestSessionbean beanRef = homeRef.create();
<returnValue> = beanRef.<ejb method name>
Please help to get a step-by-step approach to this case.
Thanks and regards,
Amey Mogare

Hi,
If I comment out the part that is using session bean's business method, DC is building fine.
And if I uncomment, then compiler is unabl eto resolve business method(s).
And i would like to mention that my EJB + J2EE App DC is building properly, but it havent yet deployed properly as I am waiting for data-source-alias name prefix to be configured by ERP team. So will this be a reason why Web Dynpro DC is not able to resolve business methods ??
Because Web Dynpro DC is able to resolved all interfaces of Session bean and entity bean. But when it comes to business method, its not able to resolve.
Any more ideas why it is not happening?
Pls help.
Now i went through some forum posts regarding this and found that we also need to add EJB DC to Java Build Path for WebDynproDC>Properties>Java Build Path.
I did this and now it is able to resolve business methods and DTOs as well. So to summarize I did following:-
1. Added EJB DC (complete DC) as a Used DC to Web Dynpro DC with Buid-n-Deploy-n-Run time dependency
2. Added Sharing reference of J2EE application DC to Web Dynpro DC -->Properties
This reference I constructed as follows:-
<vendorname>/<name of j2ee application as appearing under display name tag in application.xml (replacing '/' with '~')>
So my Sharing Reference becomes:- <vendorname>/reqpstapscreqpstapja_reqid
3. Added EJB DC to Java Build Path in Web Dynpro DC's properties
4. Then I added following piece of code to get object of SessionBean class
InitialContext context = new InitialContext();
Object o = context.lookup("java:comp/env/ejb/SessionRequestIDBean");
SessionRequestIDHome homeRef = (SessionRequestIDHome) PortableRemoteObject.narrow(o, SessionRequestIDHome.class);
SessionRequestID beanRef = homeRef.create();
beanRef.<business method>
But After doing this I am facing another problem :-
The build fails saying it is not able find the package for DTOs. But when I see the Component Controller's code it is not showing any red or yellow marks.
Can anybody pls help me out here?
Thanks and regards,
Amey Mogare

Transport issue when copying a web dynpro component

Hello All.
I have a web dynpro component lets say ZTest and now I want to copy this, I gave the new one a different name i.e. ZFINAL, now when I copied, it asked me for the trasnport and when I asked to create a new transport I got this message "Class ZIWCI_ZFINAL does not exist" and then I clicked the green arrow again and it created a transport for me. After this process I activated my web dynpro component successfully, my web dynpro component has 3 views and 3 windows. When I looked at my new transport (for ZFinal), I only saw three tasks attached to teh transport i.e. 1. Interface 2. Info Object from the MIME Repository and 3. Web Dynpro Component but I didn't see Controller (Web Dynpro), Definition (Web Dynpro) and View (Web Dynpro) attached to my transport. Now I wonder when I release my transport to Q I may have issues.
Note: My old trasnport (which has Ztest)has all the missing objects: (Web Dynpro), Definition (Web Dynpro) and View (Web Dynpro)

I resolved it myself.. I had to write the transport entry manually for the views and windows and even the component controller definition.

Web Dynpro component - Flat file upload

Hi,
We have a requirement to upload a flat file to Planning cube (real time cube) through Web Dynpro component.
Web Dynpro component which we have developed is able to read the records from the flat file.
Now, the issue is u201CHow can we save the records read from the flat file to planning cubeu201D?
If anyone has worked on the similar requirement, pls reply. Thanks in advance.
Note : We have a planning sequence which will be executed on the click of UPLOAD button.
This planning sequence has a filter on Infoprovider (cube which we are using for planning) and a planning function of type u201CFile uploadu201D in which we have defined the flat file format.
Aggregation level is made on Multiprovider which has 2 underlying cubes (One is realtime and other one is standard).
Is there any function module in which we can pass the name of the flat file so that it will be uploaded in planing cube?
Regards,
Ankur

You can deploy solution provided by Marc Bernard within following SDN's contribution:
[u201CLoad a File into SAP NetWeaver BI Integrated Planningu201D |http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90cef248-29e0-2910-11bb-df8dece7e22c]
This uses webdynpro functionality.

No executionContext attribute in Web Dynpro Component Controller

Hi All,
    I'm trying to write a Web Dynpro Component which can be used as a callable object by following the Link:[document|http://help.sap.com/saphelp_nw70/helpdata/en/43/e085d6421a4d9de10000000a155369/frameset.htm].
    I've successfully finished the getDescription method. In the execute method, I'm trying to get the executionContext attribute of the instance, but it always shows that no attribute name executionContext can be found here.
    Anyone can help me?
    Thanks,
YiNing

Hi,
You should get the executionContext attribute as an inout parameter of the execute() method. You can also declare a instance variable to hold this to be later refered in other methods of the controller.
Thanks,
Dipankar

Doubts while doing example on WDJ-Using Web Dynpro Component Interface

Hi
I am doing the example mentioned in the PDF file WDJ - Using Web Dynpro Component Interface Definition.
In the PDF file its mentioned the following code inside onActionCreateDC1:
g_Usage.createComponent("com.sap.wd.childdc1comp.ChldDC1Comp");
wdThis.wdGetWDCompInterfInstInterface().passInfo(
"Created Child DC 1");
I have one query that what is com.sap.wd.childdc1comp.ChldDC1Comp?Is it the component name of DC or the package name of DC?
I have deployed the application.When i click on button Create Child DC1 i am getting follwing exception:
com.sap.tc.webdynpro.services.sal.deployment.api.WDDeploymentException: Failed to load deployable object part 'com.wartsila.test.ChileDC1Comp', type 'Component' of deployable object 'wartsila.com/DP_TutWDInterfaces'.
When i click on Create Child DC2 i am getting follwing exception:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException:Failed to create delegate for custom controller com.wartsila.test1.ChildDC2CompInterfaceCfg. (Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)
Can anybody tell how can i solve it?
Is it required to deploy the two child component also that is ChildDC1Comp and ChildDC2Comp?If yes then how to deploy these two child DC as when i am tryng to create application for these two component then default plug is showing blank thats why i am unable to deploy these child Dcs.
Thanks
Susmita

Hi Susmita,
Is it required to deploy the two child component also that is ChildDC1Comp and ChildDC2Comp?
Yes , u have to deploy both the components.
when i am tryng to create application for these two component then default plug is showing blank thats why i am unable to deploy these child Dcs.
U need not create an Application for deploying the component .Right Click on ur project --> Deploy.
The problem is with ur Component, while creating a Component u should have created a Interface view and default StartUp plug.
Just check whether u have Created the startup plug for ur interface view.
Open the controller editor of ur interface view --> Select Plugs Tab .
and in the plug tab , check whether u have Default Start plug (in Inbound Plugs Table).
if there is no Default Start Plug , then click the Button New to create a Default Plug .
in the pop up window -- select Stsrt Up and Give the name of the plug as "Default".
After doing this , select the default plug and Right click on the plug -->copy and Open the window Controller editor -- > select Plugs Tab --> check whether u have default plug (in Inbound plugs) in the Window controller .
if the plug is not there , then paste the plug in the Window's Inbound Plug Table .
Hope it helps
Thanks and Regards

Dealer Portal - Vehicle Management System - Personalization - Web Dynpro component assignment for business partner is missing

Hi,
In the Dealer Portal, Vehicle Sales Role --> Personalization.
I am getting below Warning message.
The Web Dynpro component assignment for business partner is missing.
As per my investigation found below.
Since address formats are different for each country, you can define in the Customizing activity Assign Web Dynpro Components to Country-Specific Address Formats under SPRO --> Logistics Execution --> Dealer Portal which Web Dynpro component you want the system to use for displaying end customer addresses.
BUT do NOT understand the name of WebDynpro Component to provide.
What are the entries or WebDynpro component names to fill in below?

Hi Hussain,
Could you share the step-by-step solution? Thanks.

Warning and Error encounter while building web dynpro component

Hi,
I encounter this while building the web dynpro component. I am currently using NWDI 2004s SPS11. can advise? Thanks in advance
[Warning]: Path in Classpath for file webdynproadmin.jar not found.
[Warning]: Path in Classpath for file webdynproclientserver.jar not found.
[Warning]: Path in Classpath for file webdynpromodel_dynamicrfc.jar not found.
[Warning]: Path in Classpath for file webdynpromodelimpl.jar not found.
[Warning]: Path in Classpath for file webdynproprogmodel.jar not found.
[Warning]: Path in Classpath for file webdynproruntime_designtime_coupling_api.jar not found.
[Warning]: Path in Classpath for file webdynproruntime_designtime_coupling.jar not found.
[Warning]: Path in Classpath for file webdynproruntime_repository_pmr.jar not found.
[Warning]: Path in Classpath for file webdynproruntime_repository.jar not found.
[Warning]: Path in Classpath for file webdynproservices.jar not found.
[Warning]: Path in Classpath for file SapDictionaryTypeServices.jar not found.
[Warning]: Path in Classpath for file SapDictionaryTypesRuntime.jar not found.
[Warning]: Path in Classpath for file SapMetamodelWebdynproContent.zip not found.
[Warning]: Version for file webdynproadmin.jar not found.
[Warning]: Version for file webdynproclientserver.jar not found.
[Warning]: Version for file webdynpromodel_dynamicrfc.jar not found.
[Warning]: Version for file webdynpromodelimpl.jar not found.
[Warning]: Version for file webdynproprogmodel.jar not found.
[Warning]: Version for file webdynproruntime_designtime_coupling_api.jar not found.
[Warning]: Version for file webdynproruntime_designtime_coupling.jar not found.
[Warning]: Version for file webdynproruntime_repository_pmr.jar not found.
[Warning]: Version for file webdynproruntime_repository.jar not found.
[Warning]: Version for file webdynproservices.jar not found.
[Warning]: Version for file SapDictionaryTypeServices.jar not found.
[Warning]: Version for file SapDictionaryTypesRuntime.jar not found.
[Warning]: Version for file SapMetamodelWebdynproContent.zip not found.
Error The project was not built due to "Resource already exists on disk: / /bin/ProjectProperties.wdproperties.". Fix the problem, then try refreshing this project and rebuilding it since it may be inconsistent.
And have this error encounter:
Development Component Build (2007-07-02 15:14:00)
Component name: timeoff/gp/ui
Component vendor: test
SC compartment: test.sap.com_CAF-TIMEOFF-TST_1
Configuration: Tst_CAFDEV_D
Location: Tst_CAFDEV_D
Source code location: cocomo@cocomo
DC root folder: D:\projects\ExitMgt\1\DCs\test\timeoff\gp\ui\_comp\
DC type: Web Dynpro
Host: cocomo
DC Model check:
   All used DCs are available locally
   ERROR: Check for used DCs failed: Illegal component usage: compartment "test.sap.com_CAF-TIMEOFF-TST_1" does not use compartment "sap.com_SAP_JTECHS_1" of used DC "sap.com/tc/cmi"; using DC: test/timeoff/gp/ui(test.sap.com_CAF-TIMEOFF-TST_1)
   Build failed with errors.

Hi,
Make sure you have all these jars located in the folder C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.webdynpro.runtime_2.0.0\lib.
If they are not there, search for them in the plugins folder. They should be available at some other location. Copy them to the folder I mentioned above. Or you can modify the class path to point to the existing location.
Thanks
Ram

Web dynpro component interface, can't create a instance

Hi guru,
I have created a web dynpro component interface, and implemented it through some components.
But when I use the interface in another component, there comes a runtime error. The following is the error message.
Error when Creating Component YHREFM_OBJSEL_INTERFACE. YHREFM_OBJSEL_INTERFACE Is a Component Interface, Therefore, an Instance Cannot Be Created. Name of Component May Not Be Specified. (Using Component: YHREFM_PRINT_FORM_SE, Component Usage: USAGE1)
Need your help!
Best Regards,
Guo Guo Qing

Hi,
I have found the cause of the problem. I have mapped some context in the component interface to componenet_A. Then I active component_A, and test it. Then the exception on the top of the Thread is raised.
What's wrong with it? Could someone give me a solution?
Thank you very very much.
Best Regards,
Guo Guo Qing

Se80 - how to create a web Dynpro Component

Dear all,
I am running on SAP NetWeaver 2004s.I have the Web Dynpro under respository informatin system. but now i would like to create a new web dynpro component. can anyone tell me what are the steps?btw,i cannot find object list selection in SE 80..my se80 looks like below :
<a href="http://img502.imageshack.us/img502/5720/se80xv5.jpg">http://img502.imageshack.us/img502/5720/se80xv5.jpg</a>
thanks

That's really weird...your screenshot is missing the part of the screen where you define which kind of object you want to edit (and it's name). It's there where you must select "Web Dynpro comp./intf" and enter the name...it should be right below the "Test Repository" pushbutton...
Maybe it's a SAP GUI issue...i'd try reinstalling
Regards

No component usage created in enhanced web dynpro component

Hi experts,
I am facing the following problem:
I'd like to enhance a web dynpro component in order to add a popup window. The popup is triggered by the process_event method. So far everything works just fine.
But the popup needs to know some context attributes from the main component, and I cannot create a component usage in order to set the context mapping.
Does anybody know how to solve this issue?
Thanks and regards
Jan Phillip Höft

Hi!
Thanks for your answers first of all.
I need the popup to be a stand alone web dynpro component, so I guess the assistant class doesn't do the trick because I can not access it in the popup component.
The popup is called when the business object is saved. So that the user is asked to notify other users that the document has changed. In this popup the user should fill in the message and click a button to send it and close the popup.
So I tried the OBN approach as well but with two problems :
1. I cannot close the popup component by coding (button click) because it has no direct parent component
2. The save event is not run through properly so the document stays locked by the user. But I didn't look into this yet.
So it would be perfect to have an embedded popup component which is based on a stand alone web dynpro application so it can be closed properly but it need at least access to the guid of the main component.
Anybody got an idea for this?
Thanks and regards
Jan Phillip Höft

The Web Dynpro component cannot be generated due to serious (syntax) errors

Hi everybody,
While I was developing a web dynpro application, I had an error but I couldn't understand this error. Before I took this error message, only I changed bound one context node to another context node in a RadioButtonGroupByKey.Therefore, when I pushed activate button, I took an error message.This error message said "The Web Dynpro component cannot be generated due to serious (syntax) errors". What does it mean ? How can I find out where is the error in the application. Also, I think the reason of this error message is about a BC problem. I am waiting for your comment urgently.

Hi ,
Just delete the context (by using the context binding) and bind the field with the correct node and try to activate .
One more suggestion is that after deleting the binding and before binding to other node check it that whether that binding was properly deleted or not.Some times its not deleting the binding.
Hopely my suggestion may work.
Regards,
Satya

Dynamic insertion of MIME object into a web dynpro component

Hi,
I want to dynamically insert a MIME object of type JPEG or type GIF into my web dynpro component at runtime.
I was unable to find the database table which contains the list of MIME objects for a particular web dynpro component.
Can you please help me out with this?
Thanks in advance,
Adithya
Moderator message: wrong forum, please have a look in the "Web Dynpro ABAP" forum.
Edited by: Thomas Zloch on May 23, 2011 9:55 AM

Hi Muzammil Bichoo ,
when you copy the wda component, it will be copied and will be in active state, once all the components are activated means, windows, views, everything will be available.
now create application for your component, if you have more than one window(interface view) select the one which you need for the application.
Regards
Sarath

Web dynpro component name

Similar Messages

Maybe you are looking for