Web dynpro for ABAP vs Java

Dear all,
I know this is an already discussed topic and I found some useful stuff around this.
But I'm thinking more in the direction where we have restriction in case we go one the other way. What I got so far is that we have to go with Java in case we would like to develop stuff for mobile devices. So Java is a must for mobile devices.
What about ADS (adobe document servces) could this be used from both languages?
HCM (Birth of a child) to change the standard ... Java or ABAP?
many thanks

Hi Maurice,
If you make have to make a choice you have to consider the followings:
- Which release do you have? Java version is available since 6.30/6.40, the ABAP only as of 7.00.
- Performance. If you have your WD4ABAP and backend (eg ERP) in the same system you gain a lot of performance
- Other small difference, that Java version has a much nicer graphical editor, which I miss from the ABAP version
These are, which came to my mind.
Best regards,
Peter

Similar Messages

Possibilities Web Dynpro for ABAP versus JAVA

Hello,
I would like to know whether WebDynpro for ABAP and Java have the same options, abilities and possibilities. e'm I able to produce the same results with WebDynpro for ABAP as Java. I would like to standardize on just one of the two and be sure that it will to limit me later.
Thanks in advance.

Hi Maurice,
If you make have to make a choice you have to consider the followings:
- Which release do you have? Java version is available since 6.30/6.40, the ABAP only as of 7.00.
- Performance. If you have your WD4ABAP and backend (eg ERP) in the same system you gain a lot of performance
- Other small difference, that Java version has a much nicer graphical editor, which I miss from the ABAP version
These are, which came to my mind.
Best regards,
Peter

Can Web Dynpro for ABAP supports Mobile devices as like web dynpro for java

HI,
Experts,
Web dynpro for abap application supports mobile devices as like web dynpro java application supports the mobile devices.
Thnaks
shabeer ahmed.

Hi Shabeer,
if you are looking for Mobile Web Dynpro, this is only supported with Java: [Mobile Web Dynpro |http://help.sap.com/saphelp_nw04/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/frameset.htm]
If you are on NW 7.0, check out this documentation:
[Mobile Web Dynpro Online|http://help.sap.com/saphelp_nw70/helpdata/en/42/c136cb0f241d66e10000000a1553f6/frameset.htm]
Kind regards
Stefanie

How to call "compensation profile" iView in ECM from Web Dynpro for ABAP

Hi Experts,
I developed a compensation planning iView using web dynpro for ABAP using floor plan manager in ECM. I need to call the iView "compensation profile" but I don't know how to pass parameter to it, how to trigger it from my application. Is there anyone used to do this before?
Thanks!
- Anthony -

I have to develop my own iView to replicate Java iView.

Web Dynpro for ABAP iView can't work

Hi guys,
I've developed an application in web dynpro for abap, it can be accessed from this url:
http://pekax110.aaa.com:8001/sap/bc/webdynpro/sap/zsfa_test
But when I created an Web Dynpro iview, set the parameters as follows:
System: SAP_CRM
namespace: sap
application: ZSFA_TEST
The WAS setting of the System is:
Web AS Host Name: pekax110.aaa.com:8001
Web AS Protocol: http
I add to iview to an portal role, and assign this role to one user. When I open the iview with the user, the iview reports error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/cn.com.dimension.lenovo.xmyang/roles/cn.com.dimension.lenovo.test2cgd/cn.com.dimension.lenovo.zsfa_test
Component Name : com.sap.portal.appintegrator.sap.WebDynpro
Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 240. Cannot process expression <IView.PCDUnit.ShortID> because Unable to get PCD Unit pcd:portal_content/cn.com.dimension.lenovo.xmyang/roles/cn.com.dimension.lenovo.test2cgd/cn.com.dimension.lenovo.zsfa_test.
Exception id: 09:51_22/10/06_0011_19338950
See the details for the exception ID in the log file
The default trace files shows:
#1.5#001125C948FE006A000000590009002E0004205C95299DFF#1161481918454#com.sap.portal.sapapplication#sap.com/irj#com.sap.portal.sapapplication#yangxm#3905##PEKAX119_PGD_19338950#yangxm#a0de4330616a11db83a9001125c948fe#SAPEngine_Application_Thread[impl:3]_8##0#0#Error#1#/System/Server#Java###Content pass of Application Integrator failed.
Component Name:       'com.sap.portal.appintegrator.sap.WebDynpro',
Context Name (iView): 'pcd:portal_content/cn.com.dimension.lenovo.xmyang/roles/cn.com.dimension.lenovo.test2cgd/cn.com.dimension.lenovo.zsfa_test',
Top Layer:            'WebDynpro/TopLayer',
Producer ID (FPN):    'null',
System Alias:         'SAP_CRM',
[EXCEPTION]
#1#com.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 240. Cannot process expression <IView.PCDUnit.ShortID> because Unable to get PCD Unit pcd:portal_content/cn.com.dimension.lenovo.xmyang/roles/cn.com.dimension.lenovo.test2cgd/cn.com.dimension.lenovo.zsfa_test
     at com.sapportals.portal.appintegrator.layer.AbstractIntegrationLayer.processTemplate(AbstractIntegrationLayer.java:453)
     at com.sapportals.portal.appintegrator.layer.URLTemplateProcessLayer.processLayer(URLTemplateProcessLayer.java:33)
     at com.sapportals.portal.appintegrator.LayerProcessor.processActionPass(LayerProcessor.java:159)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doActionPass(AbstractIntegratorComponent.java:67)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doOnPOMReady(AbstractIntegratorComponent.java:53)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java(Compiled Code))
     at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java(Compiled Code))
     at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java(Compiled Code))
     at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:652)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: com.sapportals.portal.appintegrator.template_processor.TemplateParserException: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 240. Cannot process expression <IView.PCDUnit.ShortID> because Unable to get PCD Unit pcd:portal_content/cn.com.dimension.lenovo.xmyang/roles/cn.com.dimension.lenovo.test2cgd/cn.com.dimension.lenovo.zsfa_test
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processWholeTagExpression(TemplateProcessor.java:156)
     at com.sapportals.portal.appintegrator.template_processor.compiler.TemplateCompiler.processWholeTagExpression(TemplateCompiler.java:54)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseSimpleExpression(TemplateParser.java:234)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpression(TemplateParser.java:188)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpressionEx(TemplateParser.java:210)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpression(TemplateParser.java:193)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpressionEx(TemplateParser.java:210)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseComponenedExpression(TemplateParser.java:193)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseTagExpression(TemplateParser.java:170)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parseTemplateExpressionPart(TemplateParser.java:97)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parse(TemplateParser.java:89)
     at com.sapportals.portal.appintegrator.template_processor.TemplateParser.parse(TemplateParser.java:83)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processImpl(TemplateProcessor.java:406)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.process(TemplateProcessor.java:373)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.process(TemplateProcessor.java:385)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessorService.processTemplate(TemplateProcessorService.java:53)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessorService.processTemplate(TemplateProcessorService.java:104)
     at com.sapportals.portal.appintegrator.layer.AbstractIntegrationLayer.processTemplate(AbstractIntegrationLayer.java:439)
     ... 32 more
Caused by: com.sapportals.portal.appintegrator.template_processor.context.ContextException: Unable to get PCD Unit pcd:portal_content/cn.com.dimension.lenovo.xmyang/roles/cn.com.dimension.lenovo.test2cgd/cn.com.dimension.lenovo.zsfa_test
     at com.sapportals.portal.appintegrator.template_processor.context.IViewWrapper.getPCDUnit(IViewWrapper.java:156)
     at com.sapportals.portal.appintegrator.template_processor.context.IViewWrapper.access$000(IViewWrapper.java:28)
     at com.sapportals.portal.appintegrator.template_processor.context.IViewWrapper$1.getTerminal(IViewWrapper.java:79)
     at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processWholeTagExpression(TemplateProcessor.java:152)
     ... 49 more
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/cn.com.dimension.lenovo.xmyang/roles/cn.com.dimension.lenovo.test2cgd/cn.com.dimension.lenovo.zsfa_test)
     at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java(Compiled Code))
     at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java(Compiled Code))
     at javax.naming.InitialContext.lookup(InitialContext.java(Compiled Code))
     at javax.naming.InitialContext.lookup(InitialContext.java(Compiled Code))
     at com.sapportals.portal.appintegrator.template_processor.context.IViewWrapper.getPCDUnit(IViewWrapper.java:148)
     ... 52 more
#1.5#001125C948FE006A0000005B0009002E0004205C9529A580#1161481918456#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#yangxm#3905##PEKAX119_PGD_19338950#yangxm#a0de4330616a11db83a9001125c948fe#SAPEngine_Application_Thread[impl:3]_8##0#0#Error#1#/System/Server#Java###Exception ID:09:51_22/10/06_0011_19338950
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/cn.com.dimension.lenovo.xmyang/roles/cn.com.dimension.lenovo.test2cgd/cn.com.dimension.lenovo.zsfa_test
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
User : yangxm
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>&\#39;; the problem occured at position 240. Cannot process expression <IView.PCDUnit.ShortID> because Unable to get PCD Unit pcd:portal_content/cn.com.dimension.lenovo.xmyang/roles/cn.com.dimension.lenovo.test2cgd/cn.com.dimension.lenovo.zsfa_test
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:121)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:96)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 31 more
Can anybody help me out, thank you very much!
Best Regards,
Xiaoming Yang

hi Xiaoming Yang ,
i am facing the same error . can you please tell me how you have solved this ??
regards
Sujay Kulkarni

ESS framework in web dynpro for ABAP?

Recently, I need to start an ESS project using web dynpro for ABAP. Unlike web dynpro for java, we have ESS framework in every track, like pcui/xx DCs and ess/per DCs in the track. And as there are existed projects in the DCs like ESS/JP/ADDRESS, we can just follow suit.
My question is: are there ESS frameworks in web dynpro for ABAP? Or existed ESS projects based on web dynpro for abap?
Thanks for your help!

Hi,
As far as i know, it would need really a huge amount of effort to develop ess on Webdynpro for ABAP. As you know that it is not a part of SAP standard delivery, you really have to start it from the scratch.
It would be a custom developed application.
Regards,
Sharadha

Framesets in Web Dynpro for Abap

Hi all,
I have a question concerning framesets in Web Dynpro for Abap. Today we have a BSP application with 3 framesets: a header-view, a navigation-view and a main view. We'd like to create the same application in Web Dynpro for Abap. I know this is possible in Web Dynpro for Java; is it also possible in WD for Abap or does someone know an alternative?
Many thanks in advance!
Siegfried

The idea of creating viewsets withing WDA was removed. Instead just create a view to control your layout. Create viewcontaineruielements to withing this layout view to control the arrangement and positioning of the inner views.

Are ZCI interactive forms available via Web Dynpro for ABAP?

Note 955795 talks about ZCI forms available via Web Dynpro for Java. Is this kind of forms also available via Web Dynpro for ABAP?.
Do ZCI interactive forms work via Web Dynpro for ABAP without the need of ACF?
If available, which support package levels are required?
Regards

Hi Mahamed,
I got your problem. You have not done anything wrong.
It is WebAS version which is not supported for this functionality.
But there is solution to this problem
Please refer to the SAP Note number - 1055738.
I think you will get the answer and the scenario described there will match your requirement.
This is a know issues with WebDypro ABAP but this works fine for Java Web Dynpro.
I have also tried for 2 months but finally came to know about it.
Regards
Satya

Web DynPro for ABAP Basics

Hello Seniors,
I am new to Web DynPro for ABAP. Could you please give me some information or send some basic documents for Web DynPro for ABAP. Please send some basic scenarios also.
Thank you,
Chaitanya.C.N

Hi Chaitanya,
Here is some information about Webdynpro for ABAP.
1) This is basic Info of WD ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
2 ) I can give you links that can help you a lot.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Also, SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
We can call BAPI through a service call in web dynpro application. Thus automatically backgroud code for BAPI execution will be generated.
To start with Web dynpro ABAP you can try following tutorial:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
You can start with tutorials and all. There are around six tutorials in SDN library.
Web Dynpro for ABAP
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
best tutorials in wbdynpro for ABAP to start with :
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken] [original link is broken]
Have a look at the following SDN WDA Wiki . There you can find all relevant information.
https://wiki.sdn.sap.com/wiki/display/WDABAP/Main
Also you can search weblogs on web dynpro ABAP.
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/19bf8c16f25d7ae10000000a11466f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdabap/main&
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
You can start with tutorials and all. There are around six tutorials in SDN library.
Web Dynpro for ABAP
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
best tutorials in wbdynpro for ABAP to start with :
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken] [original link is broken]
http://www.****************/Tutorials/WebDynproABAP/TextRadioButton/page1.htm
reward points for helpful answers.
Thanks,
Raghava Vakada.

Web Dynpro for ABAP GANTT Chart

Hi,
Does anyone know where I can find good documentation for creating GANTT Charts in Web Dynpro for ABAP?
I have seen some for Web Dynpro for Java, but would like some for Web Dynpro for ABAP.
Thanks,
Samir

Hi,
I think it's possible. Please follow the link for help.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/68/248841a79f1609e10000000a155106/content.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/47/90649d39871e1ee10000000a42189d/frameset.htm
Regards,
Saket.

Web Dynpro for ABAP API Documentation

Hi,
Having worked on WDJ development, I am used to look up Java Doc like the following:
http://help.sap.com/javadocs/NW04S/current/wd/index.html
Is there something similiar in Web Dynpro for ABAP world? I am using the document WD ABAP NW2004s SPS8 as a reference. It does list methods of the popular interfaces and classes. It is very helpful but lacks the details on hierachies and parameters.
Also, is there a complete class diagram for the interfaces and classes used in Web Dynpro for ABAP?
Thanks in advance,
Min

I checked the link and it contains the same information as the document I mentioned. The only difference is that one is in PDF and the other is html. Here is the link to the PDF document.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/63a47dd9-0b01-0010-3d8e-de27242bf011
However, I did find a blog which serves part of the purpose. I used SWDP_RUNTIME_CORE as the package and it generated HTMLs for all the classes in the package. Highly recommended!
/people/onno.bagijn/blog/2010/02/19/abapdoc-v2
Thanks,
Min

Floor Plan Manager Technique in Web Dynpro for ABAP

Hi Experts,
Road map technique and Floor Plan Manager Technique, both are same or different.
I need to develop a web dynpro application based on Floor Plan Manager Technique. can I develop this application in WebDynpro for ABAP. If so please help me how to use Floor Plan Manager Technique in Web Dynpro for ABAP.
I don't have knowledge in java, so i cann't develop this application in web dypro for java.
Please help me.
Thanks & Regards
Sridhar

>Road map technique and Floor Plan Manager Technique, both are same or different.
They are different. The FloorPlan Manager is a tool for constructing WD applications with a similar layout and user interface. There are two different floor plans currently - the OIF - Object Instance Floorplan and the GAF - Guided Activity Floorplan. The OIF is for the editing of a single business object. It allows for things like the nesting of header and item details. The GAF, on the other hand, uses a road map to walk you through an activity - much like a Guided Procedure. The FloorPlan Manager is very powerful because it can be configured using component and application configuration - allowing you to plug in different UI Building Blocks (UIBB) as Web Dynpro Components or Views. You can change the roadmap, for instance, adding a new step by just chaning this configuration and not having to touch the code. Consistency between applications is also a major stregth of the FloorPlan Manager.
The Road Map is just a UI element in WD. It can be used to create your own custom applications.
>can I develop this application in WebDynpro for ABAP
Sure. The Floorplan manager has been available for WDA since SPS13. Have a look at the packages APB_FPM_DEMO and ABP_FPM_TEST for examples of how to build components designed for the FloorPlan Manager.
Admittedly there aren't a whole lot of documents available on the subject yet. Some eLearning is being worked on now. There are going to be some workshops at TechEd on the subject:
https://wiki.sdn.sap.com/wiki/display/Community/BringitallTogetherwithFPM%28FloorplanManager%29forWebDynpro+ABAP
The best thing to do right now is to study the demo applications SAP provides.

N4S: Web Dynpro for ABAP layout editor not working

Have problem in Layout editor in Web Dynpro for ABAP
I have installed NW04S Testdrive on 64bit Linux and able to login.
SE80 is working alright.
Next I create a Web Dynpro Comp. / Intf. and create a component.
I double click on the View name "V_Default" . The Layout editor opens on the right side. Change into Edit Mode.
The "View Elements" panel on the left side of layout editor is missing. This is where we select the various elements like "Textview" etc.
Even the right click on the "ROOTUIELEMENTCONTAINER" to insert elements using context menu does not work.
In summary I am not able to add any element in WD4A Layout screen.
Is there any special plugin required to be installed?
How to solve this problem?

you cannot develope Webdynpro for ABAP using ECC5
This is available with netweaver 2004s (WAS7.0) for which ramp up is going on right now and the general availability is expected sometime around 1st quarter for 2006.
Regards
Raja

Import Data from Office Control (Web Dynpro for ABAP) into internal-Table

Hello,
I have a question concerning the Office Control UI-Eelement in Web Dynpro for ABAP:
How can I import spreadsheet data from the Office Control into a internal-table?
I have an Excel-sheet (without any data) which is shown initially in the Office Control. First the empty Excel-Sheet will be loaded and in the second step data from an alvxml-transformation will be loaded into the Excel-sheet with the method 'activatexmlsource'. This works so far. When I change the loaded data in the Office Control and save it it will be stored as XLS-File. The problem is that I'm not able to use existing Upload-FM because every function module I tried uses GUI-functions and WebDynpro has no GUI-functionality. I always get the error that data from clipboard cannot be imported.
So now the question is:
How can I import changed data from the Office control into a internal-table staying in Web Dynpro application?
Please give some advice, if you have some useful code or ideas.
Thanks
ram
Edited by: Ramakullay Challa on Sep 24, 2009 9:05 AM
Edited by: Ramakullay Challa on Sep 24, 2009 9:07 AM

Hi,
Once you save to desktop again you have made some changes to that file, this file you want to upload it right.
Then in that case you need to use the FILEUPLOAD UI element right.
Regards,
Lekha.

Web Dynpro for ABAP:How to insert and delete a row in a table

I have a table.
My requirement is to insert a row into the table and i want to delete a particular row also.
How can i do it.
Plz reply me..

Try the Web Dynpro for ABAP forum:
Web Dynpro ABAP
Kind Regards
Stefanie

Web dynpro for ABAP vs Java

Similar Messages

Maybe you are looking for