Web Dynpro IGS configuration

Hello community,
i am facing a problem with the business graphics. Everything i try to run my project (tutorial) i get the "graphics rendering problem". After searching the web and sdn site i fixed up the address of the igs in my visual admin and as well in my project. So what is missing? do i have to install the igs first (i assume the igs is already installed when using NetWeaver 2004s)
Thanks in advance for any posts
Regards,
Rene

check whether your igs is installed by accessing the following url:
http://<hostname>:4<instance number>80
J2E instance number is usually 00 or 01, it depends what you have put during your installation.
If you are able to access, then you have IGS installed. Also make sure after your configuration in Visual Administrator for IGS, you restart the J2EE server.
In fact, there is a configuration document for IGS available in SDN. Just do a quick search for that as well.
Regards,
Subramanian V.
Message was edited by: Subramanian Venkateswaran

Similar Messages

Srm 7.0 - Hide field in web dynpro using configurations

Hello to all,
I'm trying to hide some fields on PO web dynpro. In this example on web dynpro /SAPSRM/WDC_DODC_PO_I_BD I start the component configuration /SAPSRM/WDCC_DODC_PO_I_BD, I search for the fields I want to hide and put the visibility attribute to Invisible and I mark final check box.
The fields don't dessapear from the web dynpro. Am I missing something?
Best regards,
Nacho

Thanks for your reply.
I have here two situations:
SPRO. If I add the field on Configure Field Control at Header Level/Item Level it disapears but not all fields appear on this transaction. For example, I can't do that to tolerance group (TOL_GP)
Webdynpro. Using Component Configuration of the dynpro. I guess that it is in two actions:
   - Change the value of visibility to Invisible on Web dynpro Built-In
   - Add field to context. I put for this example:
         Attributes of the Element usagesDefinition (ITEM_TOL.TOL_GP)
                 usageName ITEM_TOL.TOL_GP
                 componentName ITEM_TOL.TOL_GP
                 ConfigurationName /SAPSRM/WDCC_DODC_PO_I_BD
The webdynpro way doesn't work, Am I missing something?
Best regards,
Nacho

ABAP Web Dynpro: Application Configuration vs Admin Personalization problem

Hi,
I created an application configuration for the application MT_ORDER_APP with a component configuration on RPLM_MT_ORDER_COMP. I changed several Labels and UI Element visibility... and saved.
When I test this application config for viewing an order of type ZX99, I don't see my changes. If I right-click on the page, I see that the configuration Id used is MT_ORDER_ZX99.
Why my Z config is overrided by this one???
By testing in Admin mode, I discovered that I can personalize this MT_ORDER_ZX99 Config.... But then, the changes are visible to all users viewing ZX99 type orders.
How to manage to make my Application Config highest in priority?

Hi,
how did you open in administrative mode?
to open in adminstrative mode do as follows:
In se80 ,i.e in the menu bar:
Web Dynpro Application->Test->Test in Administation mode.
i hope u can see the option "Settings for surrent config" .
you can refer the thread.
[Re: ABAP Web Dynpro Application changes in Administation mode]
Priya.

Web Dynpro render configuration for Adobe Interactive Forms

Hi,
Is there any possibility to check rendering configuration for Web Dynpro application? I built web dynpro application which shows simple Adobe Interactive Form. In Sap Adobe LiveCycle Designer all buttons of Interactive Form are working (JavaScript) but in the form showed by web dynpro application in IE buttons have no action. Do You know what is the cause or where to search?

Hi Pawel,
The interface of the UI element InteractiveForm contains the method SET_LEGACY_EDITING_MODE, which in turn contains a Boolean parameter. The form is then ready for input
method WDDOMODIFYVIEW.
data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
check first_time = abap_true.
LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT(u2018INTERACTIVE_FORM_1u2019).
LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
endmethod.
Regards,
Runal

Call another Web Dynpro with Configuration

HI to all
I have a Web Dynpro Components, and i have made Application configuration.
So I want call this Web Dynpro Application from an other Web Dynpro Application with the configuration I have made before.
Is this possible if so what have I to that this works, has some one a code example for me.
Thanks & Regrets
Hermann

Hi Hermann,
When you run an application with a special configuration, you may notice the additional URL-parameter
&sap-wd-configId=my_configid
. Just add this as a parameter to the application URL, and it will work.
Ciao, Regina

SRM 7.13 Web-Dynpro custom configuration is not getting delegated

Hello Experts
please help to solve my issue:
SRM 7.13 I created a new configuration of a Wed-dynpro view to replace the original one.
But for some unknown reason it is not getting delegated on the SRM web. Technical Help shows the original WDCONFIGURATIONID.
My WD configuration properties show that the new config should be delegated to replace the one which is still visible on SRM web.
I even tried to add my WD configuration to the table WDY_CONF_DELC, but no luck.
I have no info yet on this from my client, so I am triyng to get some hint even this way.
Thanks
Imi

I am on SRM 7.13 and I also have problems to make my new WD configurations visible on SRM web.
Component: /SAPSRM/WDC_DODC_ORG_ATTR
View: V_DODC_ATTR_PLANT
It is actually the table for Plants in Personalization --> SRM User Settings (Personal Settings) - Attributes (Plant)
I configured the part above.
How to make my WD config work?
I tried to add the config info into table WDY_CONF_DELC, but it makes dumps in User Settings.

Field length change in Web Dynpro Components iView

Hi,
We are using SAP MDM Web Dynpro Components - Configuration Manager (NW7.3) to develop the UI. One of the issue while disply field is, Though field maintained in MDM has only 2 charaters UI that displays a full-screen-width field.
I would like to display actual field length maintained in reposiroy for each field. Is it possible??
Cheers,
Rc

This is closed.
By mistake Raised Twice....I guess I need break

HTTP 500 internal server error while starting abap web dynpro application

Hi there,
i have some problems concerning my web dynpro abap configurations in the system. When i start an application the browser appears and displays the http 500 internal server error. The required icf nodes are activated, as far as i know. the following properties are set:
hostname: aet
port: 8000
The generated url for the web dynpro application looks as follows:
http://aet.ls3001:8000/sap/bc/webdynpro/sap/zwdr_test?sap-language=EN
Maybe anybody of you out there has an idea for that situation.
Thanks for your afford and kind regards,
Albert

Hi Ulli,
the error message says:
UNKNOWN HOST
Description: Unable to locate the server named "aet.ls3001" --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
So the problem is the hostname.
When i replace the hostname with the ip of the server, the following error occures:
COULD NOT CONNECT
Description: Could not connect to the server "10.18.187.9".
But with SAPLogon, its possible to connect on the server by filling in the ip adress.
Kind regards,
Albert

Deploying MDM Web Dynpro Components on NWCE 7.2 - /wdconfig not displayed

Hi all -
I'm trying to deploy the MDM Web Dynpro Components Framework (the goal is to
have NW CE connect to and 'see' the MDM repositories) and according to the URL
http://help.sap.com/saphelpnwmdm71/helpdata/en/4a/8c20a0dc93203be10000000a42189b/frameset.htm,
one of the steps is to run the MDM Web Dynpro Configuration Manager application
(_http://<server>:<port>/mdm/wdconfig). However, I get an error stating the page
wasn't found (example: Error: Requested file /wdconfig does not exist).
Looking further, I see that WD Framework needs to be configured as a pre-req.
I'm in the JSPM and I see that MDM JAVA WD FRAMEWORK 7.1 7.11, MDM JAVA API Library
and MDM Java Connector needs to be deployed (JAVA API and Connector are first).
Under the 'Deployed Components' tab in JSPM, I see :
>> sap.com/MDM_JAVA_API - 7.1
sap.com/com.sap.mdm.tech.apireset
sap.com/com.sap.mdm.tech.connector
sap.com/com.sap.mdm.tech.mdm4j
>> sap.com/MDM_JAVA_WD_FRAMEWORK - 710.711 (SP05)
sap.com/tc/mdm/wdcomps/core/ear
I deployed MDM_JAVA_API first and have restarted the NWCE system.
I don't see any error in the logs and the URL for the /wdconfig still does not exist.
Is there something that I have to deploy? Can someone point me to a document other than
the help.sap.com that talks about CE 7.2 and MDM 7.1 configurations? I do have the master
and install guide for both.
Please advise!
Thanks!
-s

Update:
Hi - thanks for the followup.
I have the correct SCAs. I have done the following:
UNDEPLOY both components
Restarted the services
Deployed the JAVA_API first
Restart services
Deployed the Framework
Restarted the services
Yes, even though the docs said I can deploy them in order, I think there may have been
a few hitches that the error logs didn't catch.
Specifically, when I re-deployed the FRAMEWORK 7.1 7.11, there were now 19 components
listed instead of one.
I am able to go to ~mdm/wdconfig now.
However, I get a new message:
"You are not authorized to use MDM Web Dynpro Components Configuration Manager".
Even though I'm the Administrator?
I did see in the docs that I need to create a Project first and that the userID that logs in
should exist in UME and the MDM system.
(_http://help.sap.com/saphelp_nwmdm71/helpdata/en/4a/41a40c343f2ab1e10000000a42189c/content.htm)
I am looking into that now. I think I will close this thread and start a new one
specifically for that.
Thanks!
-s

Web Dynpro iView - how to pass URL parameters?

I have a Web Dynpro application that is housed in the Enterprise Portal. We have a requirement where we need to provide an external link to the iView/Web Dynpro component - for the sake of this discussion, assume it's email. As part of this URL link, we need to pass a parameter that will cause the Web Dynpro app to fetch some data.
The Web Dynpro has a startup plug parameter - call it 'id'.
I can invoke the Web Dynpro application directly, and pass the id paramter on the URL - the application can see the parameter just fine. However, when I try and do the same via a Roles-based URL, the parameter does not survive. I've tried two different methods:
http://host:port/irj/portal?NavigationTarget=ROLES://path/to/iview&id=1234
and
http://host:port/irj/portal?NavigationTarget=ROLES://path/to/iview!26id=1234
neither of which work.
is there a way to do what I'm trying to do? Note that the 'id' paramter is dynamic - I can't code it in the Web Dynpro iView configuration.

Hi,
please try the following:
http://host:port/irj/portal?NavigationTarget=ROLES://path/to/iview&DynamicParameter=<encode(id=1234)>
The value of the DynamicParameter value must bei encoded.
For details please have a lool to
<a href="http://www.sap-press.de/katalog/buecher/titel/gp/titelID-1078">this</a>
This book will be also available in English soon.
Best regards
Jochen

How to maintain properties in Web Dynpro

Hi,
In EP5 we can maintain all the properties .properties file. So we can change this property value after creating iView in portal.
How can we maintain where to maintain these properties in Web Dynpro.
ex: I have SMTP address which I am using in my Controller class. I want to change this adress later time so where I need to maintain in Web Dynpro.
Thanks
Tats

Tatayya,
Take a look at:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b8/aa343e32ff1033e10000000a114084/frameset.htm">Configuration Service</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39dcb1e5-0601-0010-51b2-c522e518213e">Web Dynpro Application: Configuration, Deployment and Execution</a>
Configurations create this way can be edited after application deployment using VisualAdmin.
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

How to configure SSO for web dynpro ABAP (not web dynpro Java)

Hi Experts,
    I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
     procedure"
   Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
     signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
Piyush

Hi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N

Using IGS in Abap web dynpro application

Hi ,
I would like to develop an Abap web dynpro application with complex graphs.
There is an installation of IGS services.
In the layout screen I see only graphic basic options.
In thr internet I saw much more options in the graphic label. ( WD applic-> view-> layout ).
Does anyone know how to add this options to the view layout?
Thenks,

עיחיחןלכלןעל

No component configuration possible for some web dynpros?

Hi experts,
I want to configure buttons for a view. Display of technical information (right click) for UI element
says:
Application: /SAPSRM/WDA_L_FPM_OIF
Web-Dynpro Component: /SAPSRM/WDC_UI_DO_ACC
Window-Info: IV_L_FPC_CA_DETAILS
View-Info: V_DO_ACCOUNTING
Configuration Id: A56B0481584E314F46F1C5E908E8819E
In SE80 no such configuration id (looks like a GUID) is found. What is
the name of the configuration ID? How can I configure this strange WD?
Other views have normal config. id's.
Any ideas?
Thanx.
Joe

Right click on the application name - in context menu chose create\change configuration, and then create application configuration.
While creating your application configuration you will be prompted with a component configuration, click on create and then navigate to component configuration and then you can make settings for visiblity of ur reqd button.
Regards
Manas Dua

In Web DYnpro for java there is any Configuration controller?

Hi,
Experts,
I am having a confusion that is there any "Configuration Controller" present in Web dynpro for java.Where as i know that it is present in Web dynpro for abap could u please pass some idea on it.And how can identify the type of component in metadata files.
Thanks in advance,
Shabeer Ahmed.

Hi,
you have Configuration Controller that we can call it as CC in Webdynpro application which developed using FPM that is Floor Plan Manager, which is used as part of developing the ESS and MSS business package.
The configuration Component is used to difine all the View Navigations and Road Map steps and define prespectives, and Vac's, Events for navigation from one view to another view.
go through this link u came to know abt FPM
http://help.sap.com/saphelp_erp2005/helpdata/en/43/3b8e8cb4ab1800e10000000a1553f6/frameset.htm
Cheers,
Apparao.

Web Dynpro IGS configuration

Similar Messages

Maybe you are looking for