Web dynpro iview in web page composer ?

Hi All,
I am developing one Web site by using Web Page Composer. Can anyone help me for how to use Web Dynpro iview on web page.
Regards,
Rahul.

HI Rahul,
As of now we can not include a Web Dynpro iView on the WPC page like other iViews.
But you can try to create a URL iView from Web Dynpro application
and then add that URL iView to your page.
_Vishal

Similar Messages

Using Web Dynpro iViews in Web Page Composer

Hi all,
is it possible to add a Web Dynpro / Web Dynpro iView in a Web Page Composer page? I'm using NW7.0 EhP1.

Hi,
I believe, it is not possible to add webdynpro iviews in WPC.
Check this help.
http://help.sap.com/saphelp_nw70/helpdata/EN/06/4776399abf4b73945acb8fb4f41473/content.htm
Good Luck!
Sandeep Tudumu

Error in SAP Web Dynpro Iview

Hi,
We are facing problem with iviews, created using SAP Web Dynpro iView Template. Whenever user clicks on any of SAP Web Dynpro iView , portal main page is opened instead of Web Dynpro application. Same problem is encounted on preview of the iView. Everything was working fine till yesterday and suddenly we are facing this problem.
Also, iview created using Web Dynpro Java Application option are working fine.
What can be the reason behind the problem?
Need your help.
Thanks in Advance,
Apurva

Hi,
Some times we get the home page instaed of the application.
This may be due to the application is not active.
Test from se80.
If it is working fine create the iview again i think there are changes made to the application.
Thanks,
gopal

Web Dynpro iviews integration with web page composer

Hi,
Can web dynpro iviews be integrated into web page composer? I was trying to integrate one ESS web dynpro iview into wpc but the system is throwing an error:
We are on EP7.01 SP3 (Enhancement Pack1). Please advice if the integration is possible in Enhancement Pack1.

Hi,
According to the documentation Web Dynpro iViews are not supported : [Configuring Entry Points for iViews|http://help.sap.com/saphelp_nw70/helpdata/EN/06/4776399abf4b73945acb8fb4f41473/content.htm].
Regards,
Pierre

Web Dynpro iView - Blank Page

Hi,
we have a problem with our web dynpro iviews. Although there are all necessary fields of the iview template filled (application name, application parameter, namespace (sap), system, web dynpro for java and windows client) there only appears a blank page with a red X, when we preview the iview.
Before we've tried to create a web dynpro iview, we've created an url iview for the web dynpro and this one was working fine.. The problem was, that it doesn't display the application in our custom portal theme with an url iview - only the default sap theme was displayed.
I've searched in the forum, but I found not really something for our case.
It would be great, if anyone can point to what the error could be..
Thanks in advance,
Lydia

Hi,
Check the SAP note: Note 1446099 - Web Dynpro application not displayed in customer theme
Try creating a Web Dynpro ABAP iview, you can find the template in Iview Template.
And in that make sure Supply Portal Stylesheet is set to yes so that it takes Portal Stylesheet.
Alternative to that is upload the theme to R/3.
To do that check SE38 program WD_THEME
Download portal theme
Once you have the Theme uploaded you need to make one more setting.
In SE80 WD_Global_Setting - goto Change and change Stylesheet URI and ensure the iView property Supply Portal Stylesheet is set to no.
Hope this helps.
Cheers-
Pramod

IView not found error when excuting ABAP Web Dynpro iView

Hi Experts,
I have created one ABAP Web Dynpro iView for an existing Application.
Parameters I have passed for iView creation.
Namespace : sap
Application Name: SampleApp
System Name: R3_SYS.
Can any one please pass on me the details what are the mandatory parameters need to be passed.
Thanks in Advance,
Chinna.

Hi Chinna,
You need to check the following parameters like
Namespace - should be 'sap' as this is root node in SICF
Application Name: - check name of WD application in se80
Please refer to below thread for creating WD ABAP iview.
Re: Webdynpro ABAP iView Blank Page
Web Dynpro for ABAP iVIew's Namespace parameter
how to create iview from webdynpro application abap
Hope it helps
Regards
Arun

Javascript error in web Dynpro iViews

Hello,
I've developed a web Dynpro page which accesses the default database ( maxdb). This page is working fine when tested by calling the application from the browser.
Now I've created an web dynpro iview in portal ( EP-6 SP15- Sneak preview). I get java script errors - <i>SSR undefined</i> and none of the drop down boxes are populated.
Can anyone help me out in this?
Thanks,
Sudhakar

Probably the stylesheets of your Portal are not compatible to the used Web Dynpro version.
Armin

Can anyone expalin to me the following properties in the Web Dynpro Iview P

Hi all,
Can anyone expalin to me the following properties in the Web Dynpro Iview Properties Editor--
Authentication Scheme
Can be Merged
Default Entry for Folder
Entry Point
Show Debug Screen
Tray Type
Points assured for help

Hi shobhendra srivastava,
1) An authentication scheme is a definition of what is required for an authentication process. In the iView you can set what authentication process (UserName/Password, X.509 certificate, etc.) the iView requires. Find more information <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/90/52c43dac1bcf51e10000000a114084/frameset.htm">here</a>.
2) The attribute "Can be Merged" allows you to merge certain objects (worksets, pages, iviews) under the same point in the portal navigation structure. All objects with the same value for attribute "Merge ID" are merged together. The object with the highest value for attribute "Merge Priority" provides the name displayed in the navigation elements (tabs in TLN and links in Detailed Navigation)
3) Find a good explanation of the attribute Entry Point <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/3e703e632c7937e10000000a114084/frameset.htm">here</a>.
4) If this parameter is "true" a debugging screen is displayed before starting the WebDynpro application. Make sure that the parameter DebugMode in the service configuration (=>Applications=>com.sap.portal.appintegrator => Service => Common_Configuration) is not 'false' if you want to use this feature.
5) The attribute Tray Type defines the design of the iView's frame. The attribute can take the following values:
fill: The content area appears with a background color
plain: The content area appears with a white background and a frame
transparent: The background is transparent and the content area appears without a frame
Hope I could help!
Best regards,
Martin

KM links should be showed in web dynpro iview

I want to creat a icon in my webdynpro iview...when i click that link it opens another page with list of links to my KM documents.....i want to make it very attractive look too....what options should i use, when i click the web dynpro icon the km page should open and also very attractive look....
i'm new so do help me
chers

Hi Sudha,
Use KM API in your webdynpro application to navigate
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f02b492c-7d76-2a10-86aa-e11e8388fde8
Koti Reddy

Portal 7.3 & Web Dynpro iView, both accessed from Internet via Web Dispatch

Hi guru,
I'd like to know the best (or the correct) way to configure the FQDN and required DNS setting to allow user access ABAP Web Dynpro iview from internet.
My setup here is very typical:
One EP 7.3 in intranet, having "ep.internal.mycomp.com" as FQDN (given during installation)
One SAP ECC in intranet, having "erp.internal.mycomp.com" as SAPLOCALHOSTFULL parameter
One Web Dispatcher in DMZ, having "service.mycomp.com", and listen to 80 port (later added 8000 port for AS ABAP).
   User access my portal by using http://service.mycomp.com/irj, no problem.
But problem raised during access WD4A iview, here are my problem and questions:
[Problem]
At the beginning, we found that the WD4A iView can only be accessed in intranet, not from internet. Eventhough we register "service.mycomp.com" in public DNS. After some http level analysis, I was shock that the WD4A iview is provided directly by AS ABAP which running this WD4A, EP does not play a "relay" role. (Don't believe the URL bar in your IE, use Tamper Data or HTTP live to check the HTTP requests, you will get it). Since we DO NOT have "erp.internal.mycomp.com" in public DNS, so the iview cannot be displayed. But I DON'T want direct access to my ERP box.
I don't know a way to get rid of the "erp.mycomp.com" request generated by EP. So I tried to overcome the problem by leveraging the same Web Dispatcher used by EP. And I did make the WDisp -> ERP WD4A work using WDisp's FQDN (ie. service.mycomp.com:8000, also keep original service.mycomp.com:80 to EP), but the iview in EP does not use this FQDN. It use the SAPLOCALHOSTFULL parameter configured in backend ERP. WDisp does not do any URL replacement for me.
[Question 1]
Is there any way to hide WD4A iview in EP (server to server communication only)?
[Question 2]
If I can only have "service.mycomp.com" entry in my public DNS, should I change the SAPLOCALHOSTFULL in ERP to "service.mycomp.com"? I doubt that it may cause a "loop" situation between WDisp and ERP ?
[Question 3]
Is it possible to access WD4A on ERP by two different FQDNs (one for public via WDisp, the other for internal access w/o WDisp) ? I know there is only one SAPLOCALHOSTFULL configuration.
Anyone have done such integration ? please share your configuraiton. Thanks

Hay Wei-Shang Ku,
Many thanks to your prompt reply of this very old post I tried to ask!
for the /sap/* redirect, think it required to use icm/HTTP/redirect_<xx> parametet in WDISP profile. And i did applied below too to make default WDISP URL go to /irj (Portal login page).
icm/HTTP/redirect_0 = PREFIX=/,TO=/irj
so for "all request to /sap/* will go to ERP":
icm/HTTP/redirect_0 = PREFIX=/sap/*,TO=/??? (how do you set the TO value here?)
May i have your WDISP profile setting for reference? Did you make use of parameter wdisp/system_0?
And here is my overall setting:
we only have "service.mycomp.com" entry in public DNS.
1. "service.mycomp.com" is WDISP URL mapped to 1 public IP (we used default http 80 port)
2. we want user can access JPortal & also backend ERP via WebDynpro iView in JPortal via
   service.mycomp.com (only port only)
3. ERP system profile:
    SAPLOCALHOSTFULL = <ERPHOSTNAME>.mycomp.com (not in public DNS)
    icm/server_port_0 = PROT=HTTP,PORT=80$$,TIMEOUT=3600,PROCTIMEOUT=3600
4. Portal:
    ABAP WebDynpro iView setting -
   System = XXX (where XXX is alias of system iView)
System iView setting -
    Logical System Name = ERPCLNTXXX
    ITS host = <ERPHOSTNAME>.mycomp.com:8000
Thanks again your information, have headache of this issue for long times....
Gary

Eventing between Web Dynpro iView and regular DynPage iView

I have seen, done eventing between two dynpage iviews and two webdynpro iviewsHowever, and gone through "How to Use the Portal Eventing for Web Dynpro iViews". However, I have been trying to have a webdynpro iview talk to a dynpage iview but they just won't communicate. Is this even possible?
Ok basically I have a portal page in a popup window with no masthead and top level navigation. The page has two iviews - the top one being an iView that points to a webdynpro application on Server A, and the bottom one being a dynpage iview on the Portal Server B.
In the webdynpro iview, the code for when a button is clicked is
public onSomeAction(Event event) {
    WDPortalEventing.fire("urn:myUrn","eventName","value");
In the dynpage iview, the code i have for it is
myServ = (IEpcfToolbox) PortalRuntime.getRuntimeResources().getService(IEpcfToolbox.KEY);
myReceiver = myServ.getClientEventReceiver(request, "urn:myUrn", "eventName");
form.addRawText(myReceiver.getWrappedScript());
try {
    if (!myReceiver.isReceived()) {
        form.addComponent(createMainScreen());
    } else {
     form.addComponent(new TextView("event received!"));
} catch (Exception e) {
    form.addComponent(createErrorScreen());
I tried all the things I could think of but the receiving iView just won't get the event fired.
Can someone confirm that this should work? and correct me where I've done wrong.
Please help. this is very urgent. your help will be greatly appreciated. thanks in advance
PS. My environments are EP 6.0 SP2 and WAS 6.40 SP14

> hi,
>
> portal eventing works properly if all participants
> are in the same domain. Otherwise portal eventing
> g does not work. If the SAP J2EE
> Engine on which the Web Dynpro application is
> deployed is in another domain, you have to map the
> IP address of the SAP J2EE Engine to the domain name
> of the
> SAP J2EE Engine on which the SAP Enterprise Portal is
> running, by editing the configuration file hosts.
>
> regards,
>
> Ganesh.N
I am no direct access to the boxes so I can't try your suggestion. It really makes sense that eventing won't work if the iViews are on different domains. I know they are in the same domain but different subdomains.
Anyway, good news I got eventing to work with the mentioned set. I found that that the SAP Java EPCFToolbox API had a bug that kept throwing javascript errors when I tried to have the web dynpro iview fire an event and the SAP one subcribed to it.
I got around it but using the EPCF Javascript API instead.
Code:
response.write("<script>");
response.write("EPCM.subscribeEvent('urn:dla.telework', 'createPdf', doSomething);");
response.write("function doSomething() {");
response.write("window.location = self.location + '&eventReceived=true';");
response.write("}");
response.write("</script>");
So basically just output raw text through the response object and it just works.
On a similar topic, since eventing can only pass string parameters back and forth, I'm still looking for a way to pass other more complex Java objects between web dynpro and sap iviews. From what I haven't they don't share the same session object (which I thought they did). So basically I can't just stick stuff in the session and pull it down on the other end. I'm clueless right now. If anybody has some tips, plesae share. Thanks

BI Reports in Web Dynpro iView

Hi Experts,
I need a favour from you in estimating small requirement with BI reports & Web Dynpro iView.
My first query, is it possible to build horizontal drilldown menus
Second query, is it possible link the BI Reports from Web Dynpro application
third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.
If all the above are possible, I have a requirement that should fulfil the below
In a portl iView, I have several BI Reports displays based on called report. But at the moment links to the report are in simple hyper link. Instead of hyperlinks, I want a horizontal menus as hierarchical/child structure. To acomplish this I chose, Web Dynpro as the best solution.
I have some development exeperience in Web Dynpro, but never encounterd such a requirement.
If any one can help me out in estimation, posibilites of the solution that would be a great help for me.
Your help will be highly appreciated.
Thanks in Advance,
Chinna.

Hi Chinna,
Check the following threads:
Show BI report in a Web Dynpro App
BI data in Web Dynpro
Re: How to create a Report from WebDympro
Re: BW server details from webdynpro
/community [original link is broken]://Bi,Portal Webdynpro
And a How To Guide:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a303e745-0d01-0010-b280-802bca844b8f
*Second query, is it possible link the BI Reports from Web Dynpro application
third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.*
You can not assign two types of app in a single iview but you can have multiple iviews assigned to a page.
This will guide you.
Regards.
Rajat

Web Dynpro iView Translation

Hi Everyone,
We have a requirement at my client to deliver the portal in two languages (Chinese and English). When I change the language of the user from English to Chinese (China) the portal content langauge changes (TLN, Masthead etc. are displayed in Chinese), however when I navigate to any Web Dynpro iViews e.g. Bank Information (ESS iView), I still see everything in English. I have checked my Web Dynpro Content Admin and both zh_CN, zh_HK are available.
My Second question is if I add some verbiage to this iView via WDP Personalization (Ctrl + right click), can this verbiage also be translated? If so, how?
Thanks for all your help!
- Osman

You should use Content AdministratorPortal Content Translation tab for translation the texts (names) for the PCD Objects (iViews, pages Worksets, Roles Folders) ect.
In Portal Content Translation Fallow the Fallowing Steps which are very simple
1) Go to Translation work Coordination Portal Content and Right Click your Folder and select NewTranslation Worklist
2) This will create the translation Worklist to which you can add your PCD Objects for Translation
3) Go to Your Folder Containing your iViews, right Click and u2018Add Object To Translation Worklistu2019
4) After You have added all the objects you want to translate, click u2018Generate Translation Datau2019 Button at the top on the Translation Worklist screen
5) Click the u2018Release for Translationu2019 button in the screen that appears.
6) Click close in the screen that appears.
7) Go to u2018Worklist Translationu2019 link
8) Search for your Worklist you just created using the search box.
9) Select the Worklist from the result list
10) At the Bottom of the screen select the u2018Source and Target Languageu2019 from the dropdown.
11) Click the Load for Translation
12) Choose whichever texts you want to translate and enter the Translate Text in the box for the target text
13) After u r done with all the translation, click close.
14) Save all and Close
15) You will go back to the previous Screen again. There select your translation Worklist and click Mark as Translated
16) Go back to the u2018Translation Worklist Coordinationu2019 link and open your translation Worklist from your folder
17) Click u2018Publish Translationu2019 Button
18) Finally Check the portal content
Polaka

Portal theme not picked for SAP Web Dynpro Iview

Hi,
We have used light framework page for our portal and all the iviews display the content within the iviews in the same set of colors (blue for buttons). However, for a WD java content, I have created an SAP Web Dynpro iView and the contents displayed here appear in the SAP colors without picking those set for the portal.
The same application parameters display the portal colors when we use the Web Dynpro Proxy iview.
Any idea how I can make the SAP Web Dynpro iView appear like the other portal iviews?
Note: The stylesheet property for the iview is already entered (ur), and I have also set the 'Supply Portal stylesheet' property to 'Yes'.
Please provide your inputs.
Thanks,
Vinay

Hi ,
In ABAP Webdynpro for similar problem we used WDFORCEEXTERNAL Sheet property of WDA.
The Web Dynpro framework automatically compares the versions of the portal and Web Dynpro
for ABAP style sheets. If the Web Dynpro for ABAP has a newer version, the WDA style sheet is used. This avoids unattractive rendering and JavaScript errors.You can deactivate this behavior again using the WDFORCEEXTERNALSTYLESHEET application parameter of WDA.See also SAP Notes 1033496 .
If you use the stylesheet of the portal to display the application, the rendering may not appear correctly and Javascript errors can occur(If portal style sheet is lower than WD).
Though Iam not familiar with WD java , the property force portal style sheet in WD java application should be enough to make WD accept portal theme.
Regards
Karthiheyan M

Web Dynpro iView for Anonymous user

Hi All,
I created a Web Dynpro iView based on local Web Dynpro application. I am trying to access this iView as a anonymous user. I have given Authentication mode as
"flase". In iView properties and Page properties Authentication Scheme is "anonymous". In all permissions I added "Anonymous Group" and given Read and End User permissions. After doing all these things Still it is prompting me for Login. My Server is 2004s SP 10.
Please Somebody tell me what I am missing.
Thank you
Joe

Hi Sreekanth,
I think you have to assign this iview to the standard user role which you can find under Portal content ->Portal users -> standard portal users -> Standard user role and assign this to group "Everyone" (if not already done).
Then you should be able to access this iview directly. Let me know if it works.
Thanks,
Hari

Web dynpro iview in web page composer ?

Similar Messages

Maybe you are looking for