Web dynpro java application throws ArrayIndexBoundException

Hi Experts,
We had a java web dynpro application in production server and was running well. There were some changes made in the RFC and reimported the web dynpro model. After we pushed the new ear in production, it throws an ArrayIndexBoundException. The same application runs well in Development as well as in QC. Did any one of you face problem like this and what was the solution? I would appreciate if you could give us a good solution.
Thanks,
Senth

Hi Valery,
Thanks for your quick response. I remember that I asked the SAP-BASIS to restart the Development server and the application started working after the restart was made. We haven't restarted the QC at all and it is working fine there too. So that the BASIS are a bit reluctant to restart the production server. Is there any other options to make the application work? It is so strange how the application works in QC without restarting. It would be much appreciated if you give us an alternative solution.
Thanks a lot,
Senth

Similar Messages

" APPLICATION NOT FOUND" while deploying Web dynpro java Application

Hi, I am getting a message that "application not found " While deploying the web dynpro java application .......... please give me a solution for this .

Hi Ram,
This error comes generally when your webdynpro project does not have an application. To create an application in your webdynpro project follow the underlying steps:
<Project>->WebDynpro->Applications ---> right click and create New Application.
Follow the steps to create the application.
Now if you create archive and deploy, it will not give you the error again.
Best Regards,
Ravi

Deploying problem of web dynpro java application

Hi,
I have a web dynpro java application with no problem about deploying.
I copied this application with another name.
I tryed new application to deploy but sdm aborted with error.
Error
19.Tem.2011 10:22:25 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : vserver0202
SDM port : 52018
URL to deploy : file:/C:/Users/CEMIL~1.BOZ/AppData/Local/Temp/temp27456HF_PERS_RAPOR_BUTCE.ear
Result
=> deployment aborted : file:/C:/Users/CEMIL~1.BOZ/AppData/Local/Temp/temp27456HF_PERS_RAPOR_BUTCE.ear
Aborted: development component 'HF_PERS_RAPOR_BUTCE'/'local'/'LOKAL'/'0.2011.07.19.10.22.15'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application local/HF_PERS_RAPOR_BUTCE.. Reason: Clusterwide exception: Failed to deploy application local/HF_PERS_RAPOR_BUTCE. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/HF_PERS_RAPOR_BUTCE. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted

Hi,
Since the exception says "Are all referenced components deployed and available on the engine?"
Check wether any DC is used as a used DC in the webdynpro component which you are deploying.
If any used DC is available try to deploy that DC in the server and then deploy ur webdynpro application.
If all reference DC's are avialable in server, still if you get this error try to rename the component and reload+rebuild the project and deploy it.
Hope this helps you...
Regards,
Saleem Mohammad.

Deploying web dynpro java application successfully but not working

Hi all,
I have a web dynpro java application. When I deployed in my local portal (7.10 SP6) it is working fine. But when I deployed in another portal (7.10 SP2) it is not working totally. In system default trace I saw below exception:
Failed to create deployable object 'sap.com/a1sbicbc~unv' since it is not a Web Dynpro object.
It seems that the web dynpro application was not deployed anymore, but in deployment UI I can see the package was deployed without any errors.
In this situation, is there any other portal/java engine configuration which may prevent the web dynpro application being deployed? For example deployment or security policy, etc?
Looking forward for replies.
B.R.

Hi,
Try to undeploy the application from the server
Then deploy it
Regards
Ayyapparaj

Web dynpro java application to update data in CRM system

Hello All,
I need to develop a web dynpro java application which will read and update data in CRM. How can I do this?
Thanks and Regards,
Deepti

First develop RFC / BAPIs to update and read in CRM system. Call those BAPIs from Web Dynpro Java application using AdaptiveRFC model.
Cheers,
~kranthi

Web Dynpro Java Application for Handheld Device

Hi everybody,
I have been reading some documentation about what is the best option to create an application for handheld device. So this is my landscape. I have SAP Netweaver 7.4 SR1 AS ABAP, and Java instance. So, I want to know whether is possible to create a normal web dynpro java application and then visualize this application on Browser of handheld device. That's all that I have to do? I read that exist another solution Developing mobile application for handhelds. By other side a need to know how to is the integration of this device with this application if exist. This application is going to consume data from SAP Backend system, so I just have to create JCO's for connect this application to this system, right?
Please, can you help me with that.
Best Regards.

Hi Deepti,,
Refer to the following thread which says that you must retrieve the data from the CRM backend system using standard BAPI's or customer Remote enabled function modules (socalled RFC's) and to access the backend system you will have to set up an RFC connection with CRM system.
Regarding web dynpro and CRM
Thanks & Regards,
Jhansi Miryala

Is it possible to cal web dynpro java application using portal application?

Hi,
is it possible to cal web dynpro java application using j2ee portal application?
If possible, how can it be done the parameter mapping over context area?
Regards.

you can just append parameter to the url as usual.
you will write some code in the controller to get the parameters and set them to the context.

Use loadrunner to test Web Dynpro Java Application

Hi Gurus,
I'm using Loadrunner 11.0 to do load test to Web Dynpro Java Application. At first, I used web(http/html) protocel script, and I could record the whole business process successfully. But the script seems very hard to understand. For example, the following script is so complex.
After this, I tried 'SAP Click and Script'. At this time, loadrunner only record my logon action, while my business operation was not recorded in the script.
"Body=sap-ext-sid=nYCksrUa3nHq2NIwTPpTKg--LpNoVBU_d2sS7nCHLaG*qQ--&sap-wd-cltwndid=WID1411644055966&sap-wd-norefresh=X&sap-wd-secure-id=kNh-egwklSanOHIGRb7-eA%3D%3D&SAPEVENTQUEUE="
"ComboBox_Select%EE%80%82Id%EE%80%84aaaa.App_Property_FormCompView.ANLKL%EE%80%85Key%EE%80%84FA040%EE%80%85ByEnter%EE%80%84false%EE%80%83%EE%80%82ClientAction%EE%80%84submit%EE%80%83%EE%80%82urEventName%EE%80%84COMBOBOXSELECTIONCHANGE%EE%80%83%EE%80%81Form_Request%EE%80%82Id%EE%80%84...form%EE%80%85Async%EE%80%84false%EE%80%85FocusInfo%EE%80%84%40%7B%22sFocussedId%22%3A%20%22aaaa.App_Property_FormCompView.ANLKL%22%7D%EE%80%85Hash%EE%80%84%EE%80%85DomChanged%EE%80%84false%EE%80%85IsDirty%EE%80%84fal"
"se%EE%80%83%EE%80%82EnqueueCardinality%EE%80%84single%EE%80%83%EE%80%82%EE%80%83",
Could anyone give me the clue or materials about WDJ load test using loadrunner? Thanks very much
regards.
zhihua

Hi Zhihua,
First delete all the cookies from your browser.
Close all the internet sessions which are opened in your system. During your script recording
Open only 1 session which you will be recording for java script.
The above mention log is the cookies from the internet explorer.
its of no use for the script you can even delete from the script.
Regards
Mohammed

Problem Web Dynpro Java applications using JasperReports

Hello all,
We have followed the footsteps of these blogs but we can not make it work.
Part I --> Part-I: Print Web Dynpro Java applications using JasperReports
Part II --> Part-II: Print Web Dynpro Java applications using JasperReports
Part III --> Part-III: Print Web Dynpro Java applications using JasperReports
Details system: 7.02 SP3
We believe that the problem is in the library, because it finds them.
1) We created project as a DC external library with *.jars
2) Public part DC external library.
3) Add public part of DC Library into new project DC WebDynpro Java.
4) Development Component -> Build is OK
5) Development Component -> Deploy is OK
6) Test app ERROR.
When we run the application shows the error:
The initial exception that caused the request to fail, was:
   java.lang.NoClassDefFoundError: net/sf/jasperreports/engine/JRDataSource
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:141)
    at com.unisys.tmb.View01.onActiongenerarPDF(View01.java:161)
    at com.unisys.tmb.wdp.InternalView01.wdInvokeEventHandler(InternalView01.java:140)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
Regards,
Luis.

Hello John,
Thanks for the link. We have performed the steps in this blog:
1) Create DC Project "External Library" with name js/jars:
- Add *.jars in folder Libraries.[Screenshot Libraries|http://img846.imageshack.us/img846/8395/jsjars.jpg]
- Add archives (*.jar) to public part with name ExternalLib. Which option to choose?
a- Provides an API for developing/compiling other DCs (Option chosen)
b- Can be packaged into other build results (eg SDAs)
- Development Component -> Build
Step 1 is OK.
2) Create "J2EE Server Component / Library" DC with name js/lib:
- Add Used DC -> public part project ExternalLibrary -> "ExternalLib"
- Specify both build time and run-time dependency here and strong.
- Generated SDA file in <var>gen/default/deploy</var> How do we check that it contains <var>js.jar</var>?
- folder gen/default/plublic/defLib/lib/java then you meet *.jars files again. is OK.
- Development Component -> Deploy.
- Go to Visual Administrator. We found the library js/lib, but has no associated *. jar. It is the problem.[Screenshot Visual Administrator|http://img542.imageshack.us/img542/5537/visualadminlib.jpg]
3) Create "WebDynpro" DC with name pdf_jasper
- Add used DC (defLib) to WebDynpro DC with option "Build time".
- WebDynpro References -> Library references --> add <var>jslib
- Deploy
- Run error: java.lang.NoClassDefFoundError: net/sf/jasperreports/engine/JRDataSource
Regards,
Luis.

Transport Web Dynpro Java applications on 7.4

Hi Experts
We have couple of web dynpro java applications running on DEV EP 7.4 system. Now we need to move them to Test/Prod. What are the options to move these? Please note we do not use NWDI, so transport thru NWDI is ruled out.
One option is to deploy these applications thru NWDS, but we would like to avoid it if possible.
Are there any other options for transport?
Thank you
Aakash

Thanks Jun
Any other option apart from Telnet?

Trigger Web Dynpro Java application automatically.

Hi All,
I don't know if I am asking too much, but I have a requirement as below
I have a Custom Web Dynpro Java application for which an iView has been created and assigned to a role on the Portal. The user just have to access the role and can run the application.
Now my requirement is to triggered or run this application without any user intervention on it's own periodically lets say after every 15 days or so. Please somebody let me know if is it possible and how?
All the help would be really appreciated.
Thanks and Regards,
Abhishek

Check out this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90a95132-8785-2b10-bda5-90d82a76431e?quicklink=index&overridelayout=true
and
Scheduling webdynpro java application
Hope this helps.

Access Web Dynpro Java application through direct URL

Hi Guys,
we have a requirement that there is a link in web dynpro abap screen, click on it will open a new ie window running web dynpro java application, so what i did is i have given direct url link for that web dynpro java application:
as this:
https://servername:50001/webdynpro/dispatcher/sap.com/ess~lea/TeamView
but after i clicked on this url, it pop up 1 window, after i entered id & passoword, it is showing this wd java appl, but there is 1 grey image on top of the view & "welcome xxxx"; below that is the actual view from wd java.
the layout is :
grey image----
welcome xxxxxxxx
Teamview
actual ivew
how to remove the grey image & the "welcome xxx"? it looks like masthead but we dun need it.
thanks

Hi Feng,
Actually what you are seeing using the application URL and after giving the credentials on Portal is a portal screen which carries the theme as well. Therefore, you will be able to see the masthead with header and Portal User Name. So, use the URL generated by preview of a web dynpro iView in your component to avoid the masthead.
Regards,
Tushar Sinha,
Infosys,
Hyderabad

Transport Web Dynpro Java Application

Hi All!!!
I want to know, how can we transport Web Dynpro JAVA application fron one server to another (Dev-> QA -> Prd) in NWDI and Non - NWDI Landscape.
Cheers!!!
Umang

Umang,
Please refer this link and there is a plenty of information available on NWDI:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/f6eb8e9e-0901-0010-8abb-cba5279db9b6
Quick help here on How to transport the Software from one Environment to another:
http://help.sap.com/saphelp_nw70/helpdata/EN/17/2c02a80bb41b4cb9a4da85ab3a4e62/frameset.htm
Thanks
Krishna

Can Web dynpro Java application run as background application

Hi Experts,
Is it possible to execute the Web dynpro java application in background without opening the application in a web browser.
We just want the WD java application deployed on the SAP Web AS server to be invoked and get executed as a background application by some external web application. It should not get open at any point of time in a web browser.
Can anyone suggest if it is possible?
Thanks & Regards,
Anurag

Hi Anurag,
Since Web Dynpro is "SAPu2019s standard UI technology based on MVC for developing user interfaces" (see http://www.sdn.sap.com/irj/sdn/nw-wdjava) it is by design not possible to run 'in the background'.
There are other possibilities to develop server processes per your requirements, such as developing web services or servlet development.
Web services are the de facto standard for executing business logic on a remote server. However, as I understand your external web application is not capable of sending web service requests, have you tried the servlet approach?
See http://help.sap.com/saphelp_nwce711core/helpdata/en/3f/f8bc3d8af79633e10000000a11405a/frameset.htm for more info on how to develop a servlet using NWDS.
Take particular attention to the sub-topic 'Servicing Client Requests' of the above guide
Hope this helps!
Best regards,
Robin van het Hof

E-catt on Web-Dynpro Java application

Hi All,
Is there any way to use e-catt on Web-Dynpro Java application?
If any one has use it please guide me the steps?
Regards

hi Rohan,
check this
http://help.sap.com/saphelp_nw04/helpdata/en/8e/df9f40eb72371be10000000a1550b0/frameset.htm
Best,
Ignacio.

Web dynpro java application throws ArrayIndexBoundException

Similar Messages

Maybe you are looking for