Web Dynpro SAP Course

Guyz,
I've been thinking of taking Web Dynpro SAP development consultant course. Upon searching in SAP.COM I couldnot find ABAP WebDynpro course.
I'm in confusion of whether to go to ABAP Webdynpro or JAVA WebDynpro ? I have 5 yrs of ABAP Experience towards integration knowledge of Business Connectors with SAP and ofcourse fair knowledge of Java & JSP & BSPs aswell....
I would like to know your suggestions which one to go for and wonder can anyone point to me set of courses for both JAVA & ABAP WebDynpros please.
Thanks in advance

Hi,
for Web Dynpro ABAP there's a 5-day course called NET310. Enter this name here: http://www.sap.com/germany/services/education/kurssuche/index.htm
and the dates and places are displayed.
Regards, Heidi

Similar Messages

SAP ESS 600 Web Dynpros Missing After Install

Hi,
We are running EP 7.0 SP11 on a linux platform. We deployed the following
components in the given order-
SAP PCUI_GP 600
IS-HER 600
SAP ASR 600
SAP PSS 600
SAP MSS 600
Each of the above components was at Support Package 08.
In Content Administraton -> Web Dynpros -> sap.com, we expected to find web dynpros
that start with "sap.com/ess~" but found none.
Any ideas what is going on?
Sincerely,
Jonathan Yun
Duke University

Hello Deb,
Even though note 761266 is primary for ERP 2004, we were able to extract the necessary information to apply to our ERP 2005 system. After we deployed SAPESS08_0-20000512.SCA, the missing ess web dynpros show up in the Portal. Thank you very much for your help.
However, I do have one additional question. We noticed that the base ESS Business Package (BPERP5ESS08_0-10003288.sca) downloaded from SDN is only about 3MB and the SAP ESS 600 patch (SAPESS08_0-20000512.SCA) is about 270MB. Are these two different components of the "ESS"? This is very different from MSS.
Thanks again for your time,
Jonathan

Web Dynpro Java in ESS

Hi!
After studying the release notes of ESS1.2 (ERP6.0, Enh. Pack. 2) I realized that the Web Dynpro Java ESS applications for travel management have been replaced with Web Dynpro ABAP. Does anybody know if this is this to be expected for the other scenarios as well?
Regards,
Thomas

Additionally, I would like to point out that a definite statement of SAP regarding this issue - future development technology for self services - would be very helpful - if not to say desperatly needed - as we have to migrate old ITS-scenarios and now decide a) about sizing of portal servers, b) set up a NWDI, c) send IT-staff to Web Dynpro Java courses a.s.o.

Web Dynpro for ABAP and Floor Plan Manager

Hi.
How can I integrate an ABAP Web Dynpro application in the Java Web Dynpro based Floor Plan Manager (FPM) framework? I'm thinking of the "General Information" page in the MSS Business Package (com.sap.pct.erp.mss.general_information), where the manager use the Employee Search iView com.sap.pct.erp.mss.generalinfo_employeesearch based on the Java Web Dynpro application sap.com/mss~eepro.GeneralInformation to select individual employees.

Hi,
See this link:
Re: difference between web dynpro java and web dynpro abap
*Also please have a look to this:
*1) Web dynpro java/abap
2) http://stackoverflow.com/questions/363523/java-or-abap-web-dynpro-sap-web-development-on-netweaver
3) pros and cons for using Java Web Dynpro over ABAP Web Dynpro
I hope this solves the issue!
Thanks and Regards
Pravesh
Edited by: Pravesh Verma on Mar 26, 2009 12:21 AM

Search help for Web Dynpro using the SAP-search help

Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!

Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen

Ides for Web Dynpro course - NET 310

Hi,
I want to use IDES system for the standard Web Dynpro course NET310. We have IDES ECC 6.0. But when i start working on the exercises of NET310 course. There is no package for NET310 object. So i'm unable to do the exercises of NET310 course on IDES. Can anybody guide me how to fix this issue, even i have ECC 6.0 IDES. Do we need something else to be installed on the IDES?
Please suggest!
Thanks,

Hi...
Those package and Demo program are only avaleable at Training server. it is nor avaleable in any other system. thats why you will not be able to findout those demo program. you have to hire an SAP training system for your practice.
Regards
Satra.

IDES for Web Dynpro course - NET310

Hi,
I want to use IDES system for the standard Web Dynpro course NET310. We have IDES ECC 6.0. But when i start working on the exercises of NET310 course. There is no package for NET310 object. So i'm unable to do the exercises of NET310 course on IDES. Can anybody guide me how to fix this issue, even i have ECC 6.0 IDES. Do we need something else to be installed on the IDES?
Please suggest!
Thanks,

Hi...
Those package and Demo program are only avaleable at Training server. it is nor avaleable in any other system. thats why you will not be able to findout those demo program. you have to hire an SAP training system for your practice.
Regards
Satra.

Exchanging data between a Web Dynpro application and SAP Web Shop

I'll try to keep this as clear as possible:
1) We have the SAP Internet Sales system running, which has a series of Business Object classes and corresponding Backend Layer objects that can return data from several sources.
2) We are able to create our own Backend Layer objects that would return data from a component called IPC, which is a Java component.
3) I would like a Web Dynpro application to retrieve data from this backend layer object, but I am not experienced enough with Java to know if what I want to do is possible. I don't think that I can use JCo, because I am trying to get a Java component (class?) in Web Dynpro to access a Java class remotely.
4) I think I am asking is this: is there a way for a Java to Java connection to be created, much like Web Dynpro can use JCo to connect Java to ABAP systems?
If this is a glaringly obvious question to Java programmers, my apologies!
- Tony.

Somebody on another forum recommended using RMI. Which would be the better option in terms of ease of implementation?
- Tony

Error in opening sap web dynpro iview

hi all,
i am trying to open sap webdynpro iview in portal but getting the following error...
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.ClassNotFoundException: com.lti.wdp.InternalCSLs Found in negative cache -
Loader Info -
ClassLoader name: [local/SLAReporting_KM] Parent loader name: [Frame ClassLoader] References: common:service:http;service:servlet_jsp service:ejb common:service:iiop;service:naming;service:p4;service:ts service:jmsconnector library:jsse library:servlet common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl library:ejb20 library:j2eeca library:jms library:opensql common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore interface:resourcecontext_api interface:webservices interface:cross interface:ejbserialization sap.com/com.sap.km.application sap.com/tcwddispwda sap.com/tcwdcorecomp service:webdynpro service:sld library:tcddicddicservices library:com.sap.aii.proxy.framework library:tcgraphicsigs library:com.sap.mw.jco library:com.sap.lcr.api.cimclient library:sapxmltoolkit library:com.sap.aii.util.rb library:com.sap.util.monitor.jarm library:tcddicddicruntime library:com.sap.aii.util.xml library:tccolapi library:com.sap.aii.util.misc library:tccmi library:tccol~runtime Resources: D:\usr\sap\CX5\DVEBMGS00\j2ee\cluster\server0\apps\local\SLAReporting_KM\webdynpro\public\lib\app.jar Loading model: {parent,references,local} -
    at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:348)
    at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:65)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.<init>(DelegatingView.java:41)
    at com.sap.tc.webdynpro.progmodel.view.ViewManager.createUninitializedView(ViewManager.java:638)
    at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:675)
    ... 49 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0007.20060509173555.0000 (release=NW04S_07_REL, buildtime=2006-05-09:16:21:23[UTC], changelist=13857, host=pwdfm114), build date: Thu May 18 17:33:32 GMT+05:30 2006
J2EE Engine 7.00 patchlevel
Java VM Java HotSpot(TM) Server VM, version:1.4.2_09-b05, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Session & Other
Session Locale en
Time of Failure Wed Jul 12 09:17:18 GMT+05:30 2006 (Java Time: 1152676038656)
Web Dynpro Code Generation Infos
sap.com/pb
SapDictionaryGenerationCore 7.0007.20060210160356.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:25:11[UTC], changelist=388986, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0007.20060210160356.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:25:18[UTC], changelist=388986, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0007.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:14:35[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0007.20060228171604.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:30:31[UTC], changelist=391800, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0007.20060210160857.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:15:31[UTC], changelist=388995, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0007.20060210160857.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:15:22[UTC], changelist=388995, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0007.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:22:56[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0007.20060210162212.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:27:38[UTC], changelist=389002, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0007.20060316153408.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:45:50[UTC], changelist=394237, host=pwdfm101)
SapWebDynproGenerationCore 7.0007.20060228171604.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:30:40[UTC], changelist=391800, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0007.20060316153408.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:45:50[UTC], changelist=394237, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/pb_api
SapDictionaryGenerationCore 7.0007.20060210160356.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:25:11[UTC], changelist=388986, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0007.20060210160356.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:25:18[UTC], changelist=388986, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0007.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:14:35[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0007.20060228171604.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:30:31[UTC], changelist=391800, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0007.20060210160857.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:15:31[UTC], changelist=388995, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0007.20060210160857.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:15:22[UTC], changelist=388995, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0007.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:22:56[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0007.20060210162212.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:27:38[UTC], changelist=389002, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0007.20060316153408.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:45:50[UTC], changelist=394237, host=pwdfm101)
SapWebDynproGenerationCore 7.0007.20060228171604.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:30:40[UTC], changelist=391800, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0007.20060316153408.0000 (release=645_VAL_REL, buildtime=2006-03-18:15:45:50[UTC], changelist=394237, host=pwdfm101)
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for view com.lti.CSLs. (Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)
     at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.<init>(DelegatingView.java:41)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.createUninitializedView(ViewManager.java:638)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:675)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:560)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:300)
     at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:204)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:359)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:670)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:267)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:726)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:662)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:808)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:227)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1278)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:353)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:551)
     at com.sap.portal.pb.PageBuilder.wdDoApplicationStateChange(PageBuilder.java:300)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoApplicationStateChange(InternalPageBuilder.java:197)
     at sun.reflect.GeneratedMethodAccessor3364.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doApplicationStateChange(DelegatingComponent.java:139)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doApplicationStateChange(ClientComponent.java:659)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doApplicationStateChange(ClientApplication.java:532)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:120)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.ClassNotFoundException: com.lti.wdp.InternalCSLs
Found in negative cache
Loader Info -
ClassLoader name: [local/SLAReporting_KM]
Parent loader name: [Frame ClassLoader]
References:
   common:service:http;service:servlet_jsp
   service:ejb
   common:service:iiop;service:naming;service:p4;service:ts
   service:jmsconnector
   library:jsse
   library:servlet
   common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
   library:ejb20
   library:j2eeca
   library:jms
   library:opensql
   common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
   interface:resourcecontext_api
   interface:webservices
   interface:cross
   interface:ejbserialization
   sap.com/com.sap.km.application
   sap.com/tcwddispwda
   sap.com/tcwdcorecomp
   service:webdynpro
   service:sld
   library:tcddicddicservices
   library:com.sap.aii.proxy.framework
   library:tcgraphicsigs
   library:com.sap.mw.jco
   library:com.sap.lcr.api.cimclient
   library:sapxmltoolkit
   library:com.sap.aii.util.rb
   library:com.sap.util.monitor.jarm
   library:tcddicddicruntime
   library:com.sap.aii.util.xml
   library:tccolapi
   library:com.sap.aii.util.misc
   library:tc~cmi
   library:tccolruntime
Resources:
   D:\usr\sap\CX5\DVEBMGS00\j2ee\cluster\server0\apps\local\SLAReporting_KM\webdynpro\public\lib\app.jar
Loading model: {parent,references,local}
     at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:348)
     at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:65)
     ... 52 more

Hi there,
Try re-deploy the application and restart the server. It will fix this problemn.
Regards,
Luciano

Multiple versions of the same Web Dynpro application on the same SAP Portal

I have a single application (local development) and deploy directly to a SAP Portal(NW 7.0) from NWDS Version: 7.0.15
No problems there, works like a charm.
But I want to have multiple versions of the same application on one portal. Eg. ill build a version 1.0 for test and deploy this. Then continue to work on version 1.1 deploying this directly on the portal. The two versions should now co-existing under different names and/or packages.
Please help.

Hi Kim,
May be you can try this and see if this works for you. I am not 100% sure if it will work for you, but worth a try I guess. Create a Test WebDynpro project and try the following steps on this project. If they work out correctly and serve the purpose for you only then try them on your actual Web Dynpro project.
1. Create a test Web Dynpro project say "TestWDProject" with Component say "Comp1" and the default views and windows etc.
Also create some working application our of this component and Windows using the Context.
2. Right click the "Comp1" and select Copy.
3. Right click 'Components" node in the project structure and select "Paste"
4.This step will try to paste the copy of Comp1 as a new Component.
5. You can change the Name and Package of the Component.
6.Similarly you'll get the prompts for views,windows etc.
7.Once you have copied everything, Just check if everything looks good.
8.Now you can create a new Application using this new component and the Component Interface View and Deploy it.
9.Test whether the Application created out of this copy works same as the original component.
You can also try to create another Web Dynpro project and paste the Comp1 in the Components node of that new project and perform the same steps.
Again, try with these Test Projects and see if this serves your purpose before applying the steps on actual projects.
Regards,
Ajay

Possibility of Web dynpro ABAP development for SAP R/3 4.7 Version

Hi Experts,
I request for information regarding Web Dynpro ABAP. We have SAP R/3 4.7 as back end. And we are going to implement NetWeaver 2004s - Enterprise Portal 7.0 as front end. We are taking development option as Web Dynpro ABAP. Is it possible to do development in Web Dynpro ABAP where you have SAP R/3 version as 4.7.
Regards,
Venkat.

Hi Heidi ,
Thank you for your reply. I have assigned points to you. Could you pls give any SAP notes which is giving this information
Regards,
Venkat.

Web Dynpro ABAP in SAP E-Recruiting

Hi,
We just imported SP8 for our SAP E-Recruiting 6.0. SP8 offers Web Dynpro ABAP as candidate UI. One question we have is how WD pages incorporated for recruiters who still use BSP pages. For example, when a recruiter logs into E-Recruiting and finds a specific candidate, he/she can click on "Candidate Profile" to get to that candidate's pages. In BSP technology, recruiter actually uses exactly the same pages that candidate uses for Work Experience, Education, etc.. With candidate UI using WD technology, does recruiter use the same WD pages when displaying candidate profile information? I have been searching all the possible places, such as IMG, SICF, in order find a spot so that I can set the switch on, but so far unsuccessful.
Any help is greatly appreciated.
Li

Hi Li ,
At best of my understanding in WD ABAP , its possible to make one WebDynpro page serving same purpose ( showing profile deatils ) visible for manty( Candidate , as well as Recruiter ) ....
I would like to know what exactly you want from web Dynpro ..then I will be in better position to tell you.
FYI ...
1) Web Dynpro ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
2 ) I can give you links that can help you a lot.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Wait not just that SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
The specified item was not found.
Cheers
Parry

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

Creation of "Web Dynpro for Java" for SAP transaction

Hi All,
In EP when we create SAP transaction iView for SAP transaction,
a)ITS server is required if we choose SAP GUI Type as WebGui(Performance wise as well as some other issues)
b)SAP GUI has to be installed if we choose SAP GUI Type as WinGui.(User has to install SAP GUI).
Can we overcome these two issues by creating Web Dynpro application for SAP transaction in quicker way. Any suggestions are appreciated.
Thanks and Regards,
Gangadharayya.

Hi,
It is not possible to display a transaction directly in a java web dynpro. If you do not want to use a transaction iview the only other possibility is to create a web dynpro that uses BAPI's as models.
Regards,
Christophe

Does SAP GUI 7.10 include Web Dynpro client?

Hi all,
I want to try out Web Dynpro client, My SAP GUI version is 7.10, I can't see the web dynpro client component when install SAP GUI, and can't see the web dynpro application in logon ui too. Seem to Gui7.10 does not include web dynpro client. I search forum can see SAP GUI 6.40 include a beta version of web dynpro client, but the download of Web Dynpro Client was not work.
Does anyone kown if the Web Dynpro Client can be integrated in Sap Gui 7.10 ? Or it was still in beta version not be released official.
best regard
reefish
Edited by: Ree Fish on Nov 18, 2008 5:33 PM
Edited by: Ree Fish on Nov 18, 2008 5:34 PM

Hi Martin ,
I think your answer resolve our problem. But i can not get get installation document after login MarketPlace account. The page show blank.
[SAP NetWeaver Business Client (with PCD Connection) |http://help.sap.com/saphelp_nw70/helpdata/en/46/4185faf54e2f90e10000000a1553f6/frameset.htm] (Service Market Place Login Required)
Documentation on installation, configuration and use of the SAP NetWeaver Business Client.
I Search the download service and can't find NWBC installation file, is it a independent client?
best regard
reefish

Web Dynpro SAP Course

Similar Messages

Maybe you are looking for