Web Forgery popup on every auction i go to on ebay
I went to surf on ebay today and every auction I went to had this message:
This web page at vi.ebaydesc.com has been reported as a web forgery and has been blocked based on your security preferences.
I was surfing ebay yesterday and everything was fine.
I am wondering why this is?
In "Tools", "Options", "Security", I unclicked "Block reported web forgeries" so that now I can see the descriptions on eBay. However, Mozilla needs to get this figured out so that it's not necessary to do this in order to see the eBay descriptions.
Similar Messages
-
Report Web forgery feature not resulting in phishing website being blocked
I received a phishing email 24 hours ago in Thunderbird (which correctly identifies it as an email scam) pretending to be from BT Online; I followed the link (http://gaazx.ridgewaywebsites.co.uk/bbttinde.html) to ensure the site had been reported as a web forgery, but it showed the site normally, without the web forgery alert. I then proceeded to report it as a web forgery, and got a confirmation from Google (!), but when I checked back later the site was still showing up normally. I have reported the site again several times, but it remains showing as normal. I'm concerned the forgery reporting tool is not working, and less wary users may be falling foul of this scam.
This process is one I've done many times before for other phishing sites, to help prevent unwary users falling foul of these nasties, but I've never had problems before.
I'm using Firefox 3.6.8, with NoScript 2.0, AVG Free 9.0.851 and Online Armor 4.0.0.15 Free as security.
== This happened ==
Not sure how often
== 24 hours agoIt seems to have filtered through now - when accessing the site the "web forgery" alert is being shown.
-
My embedded form is being reported as a Web Forgery
Hi,
Google has decided that my new form is a web forgery, and Phising attempt. The form is now useless and the client is not happy. I've submitted a report to Google to try and get this sorted out, but hope you can offer some advice to avoid this in future. Otherwise the product is useless.
Thanks, PhilThis issue is now resolved. You will likely need to restart your browser.
We're sorry for the inconvenience this has caused. We're working to prevent this issue from occurring again in the future.
Please let us know if you have any questions.
-David -
When close firefox and reopen, it open all the last webs and popups visited today
I use firefox to work. I'm web developer and in the firefox have instlalled 3 complements and 8 plugs.
When use Firefox, and in different tabs open: GMAIL, web normaly, other web, google, conection with my server plesk, ...
Normaly use 6 to 8 tabs in differents sites, some moments firefox run very slow, at the moment, in one web, it stop, dont run and response.
Than, I close firefox, pause 10 seconds to firefox service stop and reopen, it open all the last webs and popups visited today.
Sometimes, it even opens popups that had been closed for some time ago, sometimes it crashes.
In the same day, it success two or three times.It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
See also:
*Tools > Options > General > Startup: "When Firefox Starts" -
I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???
If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac. -
How To Open PopUp for every 15 min Till User Saves The Data
Hi all,
I am working on an application where I need to open a popup for every 15 min till user saves the data and stop after users save the data. I am not able to get idea on how it could be done. Kindly post some views in which this could be achieved.
Thanks in advance.Hi,
one alternative is the uncommittedDataWarning property is a out of the box funcionality, but don´t have time configuration.
https://blogs.oracle.com/shay/entry/warning_of_uncommitted_unsaved_changes
if no you can use a af:poll in combination with a popup message -
Web Dynpro popup & popup with table
Hi forum,
need an example of a web dynpro popup & popup with table.
Thanks!
Edited by: Stanley Marsh on Nov 10, 2008 4:21 PMTry to use if_wd_window_manager
Please check this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e242bf5-0901-0010-c99c-83c180163c73
a® -
Reported web forgery. Has info gone anywhere prior to this screen popping up?
I received an email from [email protected] asking me to update my account info. As my cc expiry date had just changed so I thought oh damn I forgot. I put in my updated info, then when I hit submit, at least I think that was what was on the bottom, don't honestly remember, any way a screen for "Reported Web Forgery" popped up. I got out of there I did not go any farther but did my information go anywhere? Looking closer at the email, there it DHgate.com web address at the bottom. Please put my mind at ease! Thank you. I just need to know if my info went any where.
rmcguigan; I tried that web page, and got a not found error.<br><br>
SMB13, and everyone else. Sometimes you will get a message claiming
it is from WhatEverName Corp Co Whatever. While it is possible it
did come from that company, it is also more probable it is an
'''''attempt by hackers to get your information'''''.
<BR><BR>
'''''ANYTIME YOU GET A MESSAGE LIKE THIS, DO NOT USE ANY OF THE LINKS,'''''
<br><br>
instead, log into that web site and check it from there. '''NEVER''' just
give out '''ANYTHING!!!''' BTW, some hackers know how to make messages
so that the return address looks legitimate. -
Strange window popup on every roundtrip to server
hello
i have 2004s web dynpro application outside the portal (via url address).
sometimes when user change lead selection of a table or making any other action that requires roundtrip to the server, i see a little pop up window that starts and close. it appears only for 2 seconds, but still very annoying.
anyone knows why its happening and how can i suppress that window popup?
thanks,
RoniHi,
I have noticed this popup window too. But it doesnt appear at every roundtrip time.
You can make out whether it is present or not, just by lookint at bottom right of your current browser,
If you want to see how it is affecting the performance of your application,
enter: <b>sap-wd-showInfo=X</b> in <i>Window-Preferences-WebDynpro-Server</i>.
It provides details about the roundtrip time, time taken at the J2EE and R/3 of your server, etc
For more details about the same, visit the blog: /people/bertram.ganz/blog/2006/11/21/analyzing-web-dynpro-java-application-performance-with-a-simple-url-parameter
I hope this is of some use to you.
Regards,
hanoz -
BSP Application in Portal and WebAS Authentication popup
Hello,
we have a very well running SAP Portal SP14 and a BSP
application running WebAS 6.20.
SSO between Portal and WebAS works perfect. Profiles are maintained and verify.der is imported.
But:
From time to time we have users which open logon to
portal and execute the bsp application, authentication is successfull, but after a certain period of time or any unknown incident these users get a popup from webas and they are asked(forced) to enter their username and password. It seems to be that their session expired and they have to re-authenticate. But they are still logged on to Portal.
Can we prevent this popup from beeing shown to the user? Problem is, that they enter any password and they et locked
Does anybody have the same problem?
Thanks
MaikHello Maik,
i am newbee in SAP.I have little proble with SSO.I am using Ep7.0
Though i have imported the verify.der file and installed the certificate still SSO
doesn't seem to be working.I am getting error as:
"not authorized for executing BSP application".
Do i need to give any particular role to users or is any other setting required?
regards! -
Is it possible to create a popup with the cube status for a web query. I have a request to display the status of the data once a web query is run. The request is to display all cubes within the multicube with date and times. I know under text elements a status is available, but this only list the oldest loaded cube. Any sugestions?
Thanks, SteveHello Abhijeet,
first of all thank you for your answer. You bring me one step further...But I still have a comprehension problem with BI 70.
I see three possibilities(please correct if I'm wrong):
1. I can change the original PleaseWait.html and adapt it to my needs.In my opinion this is not correct, because the change would have a global effect and i would have change an original object.Not good! So this is no real choice.
2. Create a copy of PleaseWait.html => ZPleaseWait.html and make there my changes and store it in mime repository of the portal/j2ee. Sounds good, but how can I apply this new HTML to my Webquery ?!? If I take a look into my sourcecode of the web query I will find following code:
sapbi_page.m_pleaseWaitUrl = "/irj/portalapps/com.sap.ip.bi.web.portal.mimes/web.scripting/resources/html/PleaseWait.html?version=OY76qAsVyHMxCe3pd5xyog%3D%3D";
How can I tell my Web query to use now .../ZPleaseWait.html instead of .../PleaseWait.html
Can I paste it directly in the XHTML Code ? I don't think so ... I'm right? Where can I make this adjustment in the Web Application Designer(WAD) ?
... end of part 1
Edited by: JAM on Nov 24, 2008 11:11 PM
Edited by: JAM on Nov 24, 2008 11:15 PM -
WLC 4402 - only present guest with web auth page once every (x) days
Hi all,
I am looking to migrate our guest wireless from a third-party system to the WLC. Currently, we change our guest password (WPA2 PSK) every (x) days. Each time the guest password is changed and connections are made with the new PSK, guests are redirected to a terms and conditions page which they must accept. The MAC address is then cached and the page is not displayed again until we clear the MAC cache and change the PSK.
I can almost replicate this with web auth in passthrough mode on the WLC, but it presents the guest with the terms and conditions page each time they reconnect to the WLAN, whether it be from roaming offsite or turning the wireless radio off then on.
Is there any way to have the WLC replicate our current system, where a MAC is cached and the page is not displayed until some other event takes place (changing the PSK or clearing the cache?)
Thanks!
-PWait ... Shaoqin, will the 7.5 code be released for the 4400 series controllers? The current release is 7.0.240.0 - I see releases up to 7.4 on the 5500 series controllers
Thanks
-P -
Interaction ABAP Web Dynpro popup with Windows
Hello,
I have made a view Z_Y in Web dynpro for ABAP. In this view I call a standard external window with the statement:
lo_window = lo_window_manager->create_external_window( url = lf_url ).
lo_window->open( ).
The lf_url field is a location on the Windows(XP) network. It could happen that the file doesnt exist. In this case I get a standard Windows error message in a popup that the directory cant be found with a OK button. When I click OK the popup is closed and I can use other functionality of the ABAP dynpro view.
I integrate view Z_Y in another dynpro window (W_WINDOW) that is called as a popup using the following statement:
create popup window **********************************************************************
DATA: l_window_manager TYPE REF TO if_wd_window_manager.
DATA: l_api_componentcontroller TYPE REF TO if_wd_component.
l_api_componentcontroller = wd_comp_controller->wd_get_api( ).
l_window_manager = l_api_componentcontroller->get_window_manager( ).
wd_this->m_popup_window = l_window_manager->create_window(
close_button = abap_false
button_kind = '2'
modal = 'X'
window_name = 'W_WINDOW'
title = 'Popup' ). "#EC NOTEXT
wd_this->m_popup_window->open( ).
Then I call from view Z_Y the external window using this statement again:
lo_window = lo_window_manager->create_external_window( url = lf_url ).
lo_window->open( ).
If the directory doesnt exist I get the same standard Windows error message in a popup that the directory cant be found with an OK button. But when I click OK I cant get back to the web dynpro application. I get a throbber/popup please wait and I have no interaction anymore with the button close of the dynpro popup. The buttoner size still works.
Can someone help me?
Kind regards,
Yan CazarellyHi
You ca use this function to Create a new window..
CALL METHOD wd_window->create_window
EXPORTING
modal = abap_true
window_name = 'MMPUR_CPPR_RFQ_WDW'
title = lv_otr_text
close_button = abap_true
button_kind = 3
close_in_any_case = abap_true
RECEIVING
window = wd_comp_controller->window.
wd_comp_controller->window->open( ).
here you acn impliment buttons, if you want to subcribe window button please use this window subcribe method.
CALL METHOD wd_comp_controller->window->subscribe_to_button_event
EXPORTING
button = if_wd_window=>co_button_ok
action_name = 'RFQ_WT_VENDOR'
action_view = l_api
is_default_button = abap_false
button_text = lv_otr_text
tooltip = lv_otr_text.
wd_comp_controller->window->open( ).
Please let me know if you have any issue. Please reword if its solve your problem.
Regards
Satrajit -
Hi all,
i have the following problem:
on a standard BSP by customizing, I've added a button, that opens a popup when clicked .
The popup is developed as a Web Dynpro java and it works fine. But when I fire an event inside the web dynpro I need to close the browser popup and notify the standard BSP of the popup closure.
can anyone help me?
Best Regards,
Raffaele.Hi Raffaele,
You can well on action of a button in the Web Dynpro Project trigger a portal event using EPCF for the BSP application and then navigate the flow to a static html page within the WD development component and in turn write javascript in HTML to the close the window. This way, even the HTML page would not be visible to the user but would carry the flow to close the window.
Or without using the HTML Page, directly you can trigger EPCF for the BSP by writing the code in wdDoExit() of the Component Controller. And even any button wont be required on WD screen asking the user to click to close the window.
Regards,
Tushar Sinha -
Print popup appears every time i save biiling document vf01/vf02
Hi All,
I am facing following problem in PRD system while saving billing doc via VF01 or VF02.
Whenever user saves the billing dicument popup for printing that document appears. It does not allow to cancel the print. So user has to print each n every document...
How to diable this...
Please consider this at high priority.
Thanks.Thanks all for reply.
User is facing the mentioned problem only for certain billing documents not for all...
"Output Immidietly" unchecked has no effect....
Any other solution??
Maybe you are looking for
-
HT4818 how do i clean up my start up disk? i have no idea.
How do I clean my start up disk?I have no idea. Please help.
-
Comraden! How to use business objects in Netweaver?
And more specifically, how to import(put) some data in to business object from business process? For example a have process, wich i have released in Netweavwer developing studio, by using the perspective "process developing", "web dynpro", "composite
-
How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac
-
Google Safe Browsing Service is not available Warning Message
I just downloaded the latest update for Safari 6.0.4 on my MacBook Pro running Mac OS X Mountain Lion 10.8.3 and under Security Preferences there is a warning message beside Fraudulent Sites (yellow triange with an ! in it) that says: "Google Safe Br
-
How can download java on my macbook air? anyone knows?
How can download java on my macbook air? anyone knows?