Web form: can't get phone number to show up in email notification

http://www.rockmitzvah.com/contact/contact4.htm
trying to add a phone number field so my client can call leads. I have tried the phone number field both as required and not. The resulting Thank You screen and email just show this without the phone number:
Summary of web form submission:
Your Name
j a
Email Address
[email protected]
Case Number
4388779
Message
phone number
Is it a workflow issue? How do I fix it?
thanks
j

Hi there,
Your phone number field name doesn't match any of the BC's phone number fields. You have name="PhoneNumber" there, but BC names are name="HomePhone" and name="CellPhone".
Try reinserting that form onto a page and submitting it.
Cheers,
-mario

Similar Messages

Can't get phone number up when sending an iMessage

When setting up a new iphone 5 c can't seem to get the iMessage to work properly meaning cannot send or receive messages and when it does work can only get it to come up as an email not phone number and wen anyone txts me to my number messages don't come through

Your cell phone number will be grayed out under You can be reached by iMessage at - that can't be deselected on an iPhone with iMessage. If your phone number is grayed out and can't be selected under Start new conversations from, that is likely due to the waiting for iMessage activation problem.
http://support.apple.com/kb/ts4268

I can't get my iPad to show 500 recent emails even when I set it at 500.

I can't get my iPad to show an email history of 500 or more emails. Even when it's set at that. Any suggestions. Thank you!

iPad not appearing in iTunes

How can I get phone number contacts to transfer?

I read the user guide, backed up my phone list numbers from my old phone, but found that directions to transfer the phone numbers did not work on my iphone 4. Grrrrr! What I read in the instructions does not match what I see on the screen. Also, Apple's use of the word "contacts" is used to apply to both email addresses (which did transfer easily) and phone number contacts (which did not). This can be confusing.
Has anyone transferred a phone list from their previous "dumb" phone (backup assistant enabled) to an iphone4 (not backup assistant friendly).

Hey Susanne,
I'm very sorry to hear about your lack-of-success from the Backup Assistance feature that Verizon Wireless offers. I've also had a horrible experiences with that feature on the iPhone 4 and it just seems to make it a regret of getting a new phone, haha!
Just to ensure not a further headache, have you checked online to make sure all of your contacts are successfully stored on the Backup Assistance?
Anthony

Get phone number when open tcp socket

I can get phone number and other info of phone when mobile connect to server by http on GPRS, but can I get phone number when connect by tcp socket?

When you open a tcp connection by socket from mobile phone to IP server, you use ip end to end connectivty. In fact, when you use GPRS support on your mobile phone this one have a public IP address used to establish an IP connection to an other IP device.
If you want to get the phone number, two solutions :
1/ you transmit the phone number like a datastream on you socket. But it's a static solution, because you must enter the mobile number as a input (through a textfield form or somethink like that)
2/You take the phone number in the memory of your mobile phone (Agenda). But it's so compicated because that's depend of type of mobile. The memory design is dedicated mobile by mobile.

I have an iphone4 and my husband merge his numbers with mine and i think it was deleted can you tell me how can he get his number back on his phone

have an iphone4 and my husband merge his numbers with mine and i think it was deleted can you tell me how can he get his number back on his phone

Do you possibly mean the contacts have been merged?
If so, where are each of you syncing contacts? A supported application on the computer? iCloud or another cloud service? An Exchange server?
WIthout details, it's difficult to offer specific resolutions.

How can i get music to not show up on my phone that i dont want there

how can i get music to not show up on my phone that i dont want there

If the app is G-Toolkit and you have a Gmail app on your iPhone, delete the Gmail app. Apparently the G-Tool kit is tied to a Gmail app. From searching the web my impression is that G-Toolkit is not spyware and is from a legitimate company that produces app for several platforms.

I purchased Adobe Photoshop Elements 12. Logged in and can not get serial number. Says it is incorrect. Going in circles.

Can't get serial number for Photoshop Elements. I'm logged in. I have a redemption code and also codes on the back of the box. nothing works and am running in circles. I want to install and use it and can't because I can't get the correct serial number. On the front of the box it says use the card (with redemptiom code to receive the serial number.HELP!!!

Dear Brian,
I activated my product in August of 2014. I had it a few months, October, when my computer crashed. Therefore I had to go back to Adobe tell them what happened, and then until December I had noticed that it said that I had a trial copy. I was not worried, as I had the serial number. it was working, but in January I got a message that my "trial" copy had expired.
At that time I had contacted Adobe and was told that because it was beyond the 3 months, they would no longer help me.
Therefore, at one point, when the computer crashed, I had not deactivated the program. But Adobe had gotten it working for me again.
I do not know what happened between October and December to have changed the software from a real copy to a trial copy.
Now to your patient questions.
As you wrote, that is what happens to the point of getting the trial copy, but when I follow the process through, I get a message that my "trial copy has expired". When I go the the editor, the whole process loops again, sign in, trial copy, licence page, add serial number, then the message that the trial has expired.
When I got that message the first few times months ago, I went back to the Adobe web site and downloaded another copy. (I have done this numerous times) It still said that I had a trial copy and that it had expired, there is a box to licence this software, when I click that, I have to sign in again, This time I also had gone to the Adobe web site signed in and left it open, while I put in the serial number, hoping that would help (have also tried that before). It waits and then the Editor/Organized box comes up again. When I go to the Editor, it tells me that this is a trial copy which has expired and it starts all over again.
I was so frustrated, that I waited a couple of months to try it again. The thinking was that there was some glitch that would work it self out and I could again down load a clean copy of the original, not a trial. (I do not know how I keep getting a trial copy of PSE 12, as it is not even offered on the site.)
The crazy thing is this morning when I turned on my computer, I had an update for the Adobe PSE 12 and Camera Raw. Probably because I had downloaded a copy again.
When I go the the web site to down load a copy of the PSE !2, I am doing it from the My accounts/ products page and downloads. I have left the web page open to copy the serial number from that page, although it always matches my notes.
ThanksT

HT4061 I lost my Iphone and I need IMEI number, but I have only serial number. Can I get IMEI number through Iphone serial number ? if possible please help and let me know how

I lost my Iphone and I need IMEI number, but I have only serial number. Can I get IMEI number through Iphone serial number ? if possible please help and let me know how

If you go to the computer where your sync your phone to and open itunes and then go to edit in the tool bar then preferences then device preferences then devices.. hover the mouse pointer over your device name in the back up lists that appear there and it shows the IMEI

Can I get phone support if I have registered my ILife 08?

Can I get phone support if I have registered my ILife 08?
I'm still having problems with the Imovie 08 help viewre:ssometimes it's there other times it converts back to Imovie HD!

Maybe here:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
Also see:
https://discussions.apple.com/message/18264914#18264914

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Can i get a number of rows in the select list??

Hello~
I am studying the "oracle call interface". but i don't know much about oci.
Anyway i want to know that how can i get a number of rows.
for example, there is a source code of the number of colums in the select list.
The following is a list of DB(example)
/*DB table*/
ID NAME CODE ID
1 A 1 A
2 B 2 B
/*source*/
err = OCIAttrGet ((dvoid *) stmhp, (ub4)OCI_HTYPE_STMT, (dvoid*)
&parmcnt, (ub4 *) 0, (ub4)OCI_ATTR_PARAM_COUNT, errhp);
/*result*/
The Column is 4. (ID, NAME, CODE, ID)
So, i think that the row is 3 (ID, 1, 2) in the DB table.
Simply, Can i get a number of rows in the select list??
for example,
err = OCIAttrGet ((dvoid *) stmhp, (ub4)OCI_HTYPE_STMT, (dvoid*)
&parmcnt, (ub4 *) 0, (ub4)OCI_ATTR_RAW_COUNT, errhp);
I'm trying to get the number of row count. but i can't find.
Please, could you let me know that how can i get the number of row count.
Thank you.

Thank you for your reply.
we are tested the source code by reply.
The following is the test source code.
/*source code*/
strcpy (szStatement, "SELECT * from DB_TABLE");
OCIStmtPrepare(gpOCIReadStmHandle, gpOCIErrHandle, szStatement,
strlen(szStatement), OCI_NTV_SYNTAX, OCI_DEFAULT);
OCIStmtExecute(gpOCISvcHandle, gpOCIReadStmHandle, gpOCIErrHandle,
0, 0, 0, 0, OCI_DEFAULT);
/* get a number of rows count , Reply : prajithparan*/
OCIAttrGet((dvoid *)gpOCIReadStmHandle, OCI_HTYPE_STMT, (dvoid *)&nRowCount, NULL, OCI_ATTR_ROW_COUNT, gpOCIErrHandle))
But There is a problem of the result value.
The result value is 0. It's mean that the row count is 0. and then we are using the all of fuction is succeed.(return value)
I don't know what is problem. Please let me know about the problem and solution.
Thank you.

How can I get the number request's (count) for One interface

Hi Guru's,
I have a requirement,One interface say Hello world._How can I get the number request's (count) for this interface_.I thing with BAM it's possible.
But I have no idea about BAM.If is there any alternative please give directions and instruction how to achieve this task.
Can any body help.Thanks in advance.
Regards
Mani

You have to query the SOA_INFRA schema to get the answer.
Build a select query in cube_instance table.
Thanks,
Vijay

How can I get the number of missed messages to pop up on my message icon like the would if i missed a call

How can I get the number of missed messages to pop up on my message icon like the would if i missed a call

Hi,
Go to Settings>Notifications Center>Messages, and make sure the Badge App Icon is turned ON.
Cheers,
GB

Can't get my number pad to work - No Num Lock

Hello,
I recently got my iMac with the wireless keyboard and noticed that I can not get my number pad to work. There is no num lock button to turn on/off, just the clear button. Can someone help me figure this out? Thanks
Jay

This is from the built-in Mac Help.
Hope it works for you.
My numeric keypad doesn't work
The way the numeric keypad works depends on your computer, the keyboard you're using, the application you're working in, and whether the Num Lock key is engaged. Usually, the numeric keypad is used to enter numbers in a document, but in some applications you might be able to use the keypad to navigate (move around in) your document.
Press the Num Lock key to switch between the ways the numeric keypad functions.
If you have a separate numeric keypad on your keyboard, the Num Lock key is located in the numeric keypad. If you're using a portable computer, the Num Lock is a function key, marked Num Lock (F6). If your keyboard has a separate keypad but no Num Lock key, try pressing Shift-Clear.
Most portables have a group of keys on the keyboard that can function as the numeric keypad. To find the keypad, look for small numbers or symbols in the lower-right corner of keys on the right side of your keyboard. Press the Num Lock key (F6) to turn on the keypad. The green light glows on the Num Lock key when the keypad is active.
S
iMac 2Ghz Intel Core Duo Mac OS X (10.4.8)

Web form: can't get phone number to show up in email notification

Similar Messages

Maybe you are looking for