Web galleries: how to export the image list only?

Hi there.
I use Lightroom 5 for managing my web galleries, but I have my own software to run them. My workflow is this:
I use "Publish to folder" to generate the needed JPEG images, and I use another software to sync them to my server
I use the "Web Gallery" feature only to define the list and the order of photos in each gallery
I use the "Export..." feature in Web Gallery to get the .XML file with the list of photos - this file can be directly read by my software
The problem is that "Export..." also generates the images for the gallery, and after the XML has been generated I have to stop this task manually - it's an annoyance. Furthermore, it would be nice if I could export all my galleries in a single step, with multiple files generated, one per gallery.
I don't need anything else other than the image file name: the metadata are extracted from JPEGs. All file formats would be ok (XML, TXT, JSON, whatever).
Thanks.

Lr doesn't support the workflow you describe. So, best option is to do a Google serarch for third party web galleries/plugins to see if any of them do.
In menatime, you could submit a feature request at http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

Similar Messages

  • How to export the material list during sales order creation

    Hello,
    In VA01 while creating Sales Order is there are an option to export a list of material numbers at one shot?
    I have about 400 materials to create in 1 sales order. It's time consuming to enter one by one manually.
    Please help. Will reward points.
    Pri

    Hi Pri,
    Go to VOV8 transaction check the document type PV -Itemproposal if not there then define the document type for Itemproposal.
    You copy the Standard OR type do these settings only
    Sales document type PV Item proposal
    SD document categ. D
    Screen sequence grp. MA
    Transaction group 5
    Doc. pric. procedure C
    Display Range UALL
    FCode for overv.scr.UER1
    Propose deliv.date give chek mark    
    Define the number range and assign number range.
    Noe you try
    I hope it will help you,
    Regards,
    Murali.

  • How to export Fireworks image to MS Sharepoint

    I am building a SharePoint site and would like to know how to export the image I created in fireworks to SharePoint.  As of right now, I can export the image to the SharePoint home page, but none of the links are in tact.
    Can anyone tell me how to export the image I have created in Firework, along with the links, to the SharePoint home page???

    You did not understand my question or do not have an understanding of SharePoint or Fireworks.
    I am building an image on the home page of the SharePoint site.  I need have the user click on sections of the image to take them to certain places within the SharePoint site.  The image has been built.  The links to the pages have been added to the images with rollovers, using Adobe Fireworks.  I need to take that image, with the links and rollovers, and move that to my SharePoint home page.
    As of right now I can only move the image, but the links and rollovers do not go with it.  I have added it to a 'page viewer' web part on the Sharepoint, but all the actions take place just withing the page viewer web part, rather than moving the entire browser to the selected page.
    Can anyone help with this?

  • [web gallery] how to define the export color profile

    Hello,
    I'm currently working on a web gallery template wich will create both web size and full size images. It will allows my clients to directly download the images they want for their article, and save me a lot of time for the uploading process.
    This step is done. I've found in other web templates how to do the multiple sizes. You can have an example here: http://nack.ch/series/biscuits/index.html
    But as I often work for press, I'd like to be able to export my images in a profile like ProPhotoRGB or AdobeRGB instead of sRGB. Is there a way to do that?
    I suspect there should be a photoSizes.*. function that I have to insert in my galleryInfo.lrweb, but I didn't found a listing of the different parameters we can set for web galleries.
    Have you any idea to solve this problem or at least where I could find any information about that?
    Best regards
    Niels

    Sorry, there is no way to do this in the 2.x SDK.
    We'll keep your request in mind for a future version.
    - Andy

  • How to export the Apex web page to PDF with click of a button?

    How to export the Apex web page to PDF with click of a button?
    Am looking at exporting the Form view on APEX to be exported to PDF.

    In order to get a PDF, you need to generate a Report....in PDF format.
    If you are using the APEX Listener, you can initiate the download of the PDF by calling APEX_UTILS.download_print_document()  (I normally place this in a Process)
    BUT -- You have to create the Report (under Shared Components) and a Template (also under Shared Components).
    The white paper in my first post gives you the HOWTO "[Create] Custom PDF Reports with Oracle Application Express and the APEX Listener".
    Start by creating a Report (in Shared Components, bottom right) that uses a simple SQL statement like:
    Select * from emp where empno = :P15_EMPNO
    You may need to hard code the parameter before you hit "Download XML" button.
    The XML that you get from clicking "Download XML" satisfies the "Step 1 - Create an XML Data Source" found on Page 11 of the document.
    The rest of the instructions is in that whitepaper.
    MK

  • I have limewire so how do i export the song list to library?

    I have limewire and id like to export the song list and import it to the library but when i click file export song list it will not let me click it. any ideas on how to resolve this?
    laptop presario 2100   Windows XP   none

    Thats not entirely true.
    I have an Audi car kit and it copies all contacts, missed/received/dialed numbers from the iPhone 3G to the cars system.
    I can scroll through the contacts in the same way I can on the actual phone.
    So it is possible to transfer the contacts via bluetooth but obviously this doesn't work with every manufacturer or bluetooth implementation.

  • How may I view fonts in the watermark menu without having to export the image first?

    How may I view the fonts in the watermark menu without having to export the image first?

    Go to the Mac App Store main page and click on Support under Quick Links.
    (82704)

  • How to export all images as 4x6?

    Okay, one of the things I absolutely love about Aperture is the ability to export many different versions for different purposes. As a wedding photographer, there are many different purposes to export for.
    Here's the glitch that I'm running into though. We've now started only giving DVD images to our clients sized as 4 x 6s at 300 dpi. Anything larger, we'd like them to purchase through us to maintain quality.
    I've been trying to figure out a way to get Aperture to export the images we've edited out as these 4 x 6 at 300dpi, but for the life of me, I can't seem to get it right. We crop at 8 x 12 so the ratio is fine, but getting it to come out right it a bugger.
    I can't tell it to export at 4 x 6 because that only works for portrait and not landscape orientation. I can have a different export for each orientation since I have to maintain numbering consistency with our web galleries and their DVD copy.
    I finally ran it out at 50% of original size, but hardly any of the images come out at 300 dpi. Aperture is just not doing everything I assumed it would.
    Any ideas?

    Set up an export preset as follows (from memory, so I apologise for any slight wording errors):
    Duplicate JPG Original size preset and rename something like 6x4@300
    'Size to' 'Fit within Inches' Width 6.0 Height 6.0
    'DPI' 300
    sRGB colourspace
    Because all your images area already cropped to the right aspect ratio (3:2), setting size to 'fit within' will make the longest side 6 inches at 300dpi. It doesn't matter whether they are landscape or portrait. I have done it and it works perfectly.
    If you have different aspect ratios and want to crop to 3:2 then export automatically, that is more tricky, but I don't think that is what you want.

  • How to export the data to a excel file from RSA3?

    Hi experts,
    1.I am trying to save the RSA (SRM extractor) to excel spread sheet to compare SRM data with BI data. When i run the the transaction RSA3 it just showed me 10 different data packets. How to export the data to excel spread sheet for reconciliation?
    2. Does any body know if the stepup tables exist for SRM extractors?
    Thank in advance
    Sharat.

    Hello Sharat,
    You have two options of saving data to excel sheet:
    Step 1: 
    Goto RSA3, change the "Data Records / Calls" to 1000 and then execute. This way instead of 10 different packets you will get one packet.
    Step2:
    Click on the list button, open the packet by double clicking it. You will see all the data on your screen.
    Step3:
    Goto System -> List -> Save - > Local File -> Spreadsheet and give some name for your xls file.
    Assign points if helpful.
    Regards,
    F-S

  • How to get the image stored in archieve link as an attachment in work item.

    Hi All,
    through transaction OAWD we are storing scanned images.
    Once this transaction is executed a workitem appears in the inbox of the initiator with the scanned invoice as attachment.
    When the user executes the work item FV60 screen is displayed where the user enters the data based on the scanned invoice attachment.
    After the user Parks the document the custom workflow triggers and a workitem appears in the inbox of an approver.
    Our requirement is that the scanned image should also appear as the attachment.
    Can you please suggest how to get the image stored in archieve link as an attachment in work item.
    Regards
    Shraddha

    Hi Martin,
    with every parked document a scanned image is linked.
    I need to create a link under objects and attachments in the work item, such that when the user clicks that link the image is displayed.
    At present the following functionality is available.
    The BO used is FIPP
    Objects and attachments:
    parkeddocument:AK0108500001252008.(via FIPP binding with WIOBJECT_ID)
    On clicking the link below objects and attachments: the parked document AK0108500001252008 opens in display mode.
    Now we want to have 2 links:
    parkeddocument:AK0108500001252008.
    image.
    When we click on the link image then the scanned invoice linked to the document should get opened.
    I am able to get the image id of the the image through  SAP_WAPI_GET__OBJECTS,
    export parameter leading_object provides the detail.
    But I am not able to figure out how to use it in my workflow to display it as an attachment.
    Hope this will give a better understanding of my question.
    can you please suggest as to how I should proceed with it.

  • How to store the images in Oracle?

    Hi,
    I am a new developer, trying to find out how to store the images in Oracle. Is there anyway that I can store the images in Oracle and insert them into my html file?
    Thanks!
    Sarah

    There is a simple image example available from OTN.
    From the OTN main page, go to Products --> interMedia --> Sample Code. The name of the example is "Load rich media content with a browser."
    This example loads and retrieves an image from an Oracle8i database through a web page using the Oracle interMedia Web Agent.
    Hope this helps.
    null

  • [Help] Export: the image size

    dear all,
    I am trying to export the image from AI. I set the document size 256*256 px when I create new document.
    after I finish my image, i wanna export to the same size, that is 256*256 px.
    however, if I use 128dpi "resolution", I will not get 256*256 px.
    now does anyone now how I can get the same size of exported image as I set in the begining?
    Thank you for your kind help.

    File-->Export-->TIFF(save as type) & Use ArtBoards- (All)-->TIFF Options (Color Model(GrayScale), Resolution (Screen), -->OK
    If you use high Resolution, your file size will become bigger, for instance, if you set the size 1inch when you create the documents, which 72pixels*72pixels you work arear. later if you  use "300dpi", you will get the 300pixel*300pixel output images, if use " 150dpi", u will get the 150*150 pixels images.
    my stupid question is because i didn't know the "screen" mean and didn't use it. . but anyway, it's solved with "screen'
    P.S :this is the fist post for me here
    PP.S: dpi (dot per inch), somehow, means ppi(pixel per inch)

  • How to export the same mb size of my cr2 files into jpg or tiff files in Lr?

    How to export the same mb size of my cr2 files into jpg or tiff files in Lr?
    Let's say my file size is 22mb, when i export the file to tiff or jpg, although Iam careful with the settings- file size, dimension, resolution, I can't manioukate how I want it.
    With jpg I tried everything, no matter what i do or change in files size or resoltion it remains the same size- 7mb as opposed to 22..
    Please advise,
    Best wishes,
    T

    I would noramlly opt for a tiff file, sending such a high res through the nest a nightmare
    This is probably just an improper use of terminology, but the resolution of a JPG, DNG and TIF should all be the same.
    The files differ in size, not resolution and not number of pixels.
    Jpg is not that bad, but its a pitty they have to be edited under a jpg format..
    Your raws are edited as raw. There is no loss of quality in the editing process. The files are then exported as JPG, which will cause a loss of quality. For just about any use, the loss of quality in the image when you export a JPG at quality level 12 is NOT noticeable. For many uses, exporting a JPG at a quality level of 8 will not be noticeable either, unless you intend to print the photo at a very large size. As twenty_one (not his real name) said, "Jpeg compression is fantastically effective".

  • How to export the data to excel in OAF Page - Urgent

    Hi All,
    I have a developed a page wich dispaly the records based on some condition.
    The Page has two regions.
    1.RowLayout Region
    2.Table Region
    Both the regions are getting the data from two diffrent VOs.
    In this case how to export the data to excel as the export button will not work if the page uses more than one VO(I think).
    Please help me.
    Thanks,
    Srinivas
    Edited by: SrinivasChanda on Oct 7, 2009 10:07 AM

    Hi Gaurav,
    Yes you are rite.When i tried exporting the data(which is coming from two different VOs altogether),i got only one region's data and then got error.
    Please note: Two regions(RowLayout,Table) are getting data from two different VOs
    below is one of the region(row layout) data:
    Hierarchy     Learning Certification Status     Learning Certification     Supervisor
    Direct Reports     Passed Only     All     Michael Swinnerton
    below is the error:               
    <div CLASS="errorText">               
    <html lang="en-US">               
    <head>               
    <script>               
    function ignoreWarnAboutChanges(url)               
    document.location.href = url;               
    </script>                
    <title>Error Page</title>               
    <link rel="stylesheet" charset="UTF-8" type="text/css" href="/OA_HTML/cabo/styles/blaf.css">               
    <META name="fwk-error" content="Error occured while processing the request">               
    <META name="fwk-error-detail" content="oracle.apps.fnd.framework.OAException: Application: FND     Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.io.IOException: Stream closed;           
    "     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)"               
    "     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:865)"               
    "     at OAErrorPage.jspService(OAErrorPage.jsp:34)"               
    "     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)"               
    "     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)"               
    "     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)"               
    "     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)"               
    "     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)"               
    "     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)"               
    "     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:119)"               
    "     at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:547)"               
    "     at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:518)"               
    "     at OAExport.jspService(OAExport.jsp:122)"               
    "     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)"               
    "     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)"               
    "     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)"               
    "     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)"               
    "     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)"               
    "     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)"               
    "     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)"               
    "     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)"               
    "     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)"               
    "     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)"               
    "     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)"               
    "     at java.lang.Thread.run(Thread.java:534)"               
    ## Detail 0 ##               
    java.io.IOException: Stream closed               
    "     at java.io.BufferedWriter.ensureOpen(BufferedWriter.java:98)"               
    "     at java.io.BufferedWriter.write(BufferedWriter.java:197)"               
    "     at OAExport.jspService(OAExport.jsp:107)"               
    "     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)"               
    "     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)"               
    "     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)"               
    "     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)"               
    "     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)"               
    "     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)"               
    "     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)"               
    "     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)"               
    "     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)"               
    "     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)"               
    "     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)"               
    "     at java.lang.Thread.run(Thread.java:534)"               
    java.io.IOException: Stream closed               
    "     at java.io.BufferedWriter.ensureOpen(BufferedWriter.java:98)"               
    "     at java.io.BufferedWriter.write(BufferedWriter.java:197)"               
    "     at OAExport.jspService(OAExport.jsp:107)"               
    "     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)"               
    "     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)"               
    "     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)"               
    "     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)"               
    "     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)"               
    "     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)"               
    "     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)"               
    "     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)"               
    "     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)"               
    "     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)"               
    "     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)"               
    "     at java.lang.Thread.run(Thread.java:534)"               
    ">
    </head>
    <body>
    <table width=100%"" border=""0"" cellspacing=""0"" cellpadding=""0"">"               
    <tr> <td><img src="/OA_MEDIA/FNDSSCORP.gif" alt=""> </td></tr>               
    <tr> <td> </td>                
    <td> <a href= /OA_HTML/OALogout.jsp>Logout </a></td>                
    </tr>               
    <tr> <td width="100%" nowrap class="OraBGColorDark" >  </td> </tr>               
    </table>               
    <p>               
    <center>               
    <table width="95%" border="0" cellspacing="0" class="OraBGAccentDark" cellpadding="0">               
    <tr> <td>   </td> </tr>               
    <!-- <tr> <td class="OraErrorHeader"> <img src=/OA_HTML/cabo/images/errorl.gif> Error Page </td> </tr> -->               
    <tr> <td class="OraErrorHeader"> <center> Error Page </center> </td> </tr>               
    <tr> <td colspan=2 class="OraBGColorDark"> </td> </tr>               
    <tr> <td>   </td> </tr>                
    <tr> <td colspan=2 class="OraErrorText" >You have encountered an unexpected error. Please               
    contact the System Administrator for assistance. </td> </tr>                
    <tr> <td colspan=2 class="OraErrorText"> Click <a href=javascript:ignoreWarnAboutChanges("/OA_HTML/OAErrorDetailPage.jsp")> here </a> for exception details.                
    </td> </tr>               
    </table>               
    </center>               
    </div>               
    </body>               
    </html>
    Please help me to solve this issue.
    Thanks,
    Srinivas

  • How to append the data list bod (JList)

    how to append the data list box (JList)
    Message was edited by:
    raju_2reddy

    For this you will need a nested internal table. such that each column of the internal table should be declared as another internal table.
    Try something like this :
    " Lets say that the type of table that will be returned by the function BOM is ty_ret_tab, then declare as follows
    types begin of ty_tab,
    c1 type table of ty_ret_tab,
    c2 type table of ty_ret_tab,
    end of ty_tab.
    data gt_tab type standard table of ty_tab,
            gwa_tab like ty_tab.
    Now the question is how many columns should you declare ? Because you said that in a loop you intend to call a function which will return a internal table and this internal table you need to store in a column of another internal table. And if this is not fixed, you would need to do some dynamic programming to achieve this.
    But if we assume that there are fixed number of columns and fixed number of loops, then within the loop, you wiill have to simply move the data from the returned table to each of the columns. Then append the work area outside the loop.
    data field(30) type c.
    data c_tabix(10) type c.
    field-symbols <fs> type ret_tab.  " this should be
    Loop at itab.
    call function BOM...
    exporting...
    importing.....
    tables  ret_itab.
    c_tabix = sy-tabix.
    concatenate 'C' c_tabix into field.
    condense field.
    assign component  (field) of structure gwa_tab to <fs>.
    <fs> = ret_tab.   " Pass data to each column
    endloop.
    append gwa_tab to gt_tab.  " Now a single record with all columns containing an internal table is built.
    Hope this pseudo code helps.
    BR,
    Advait

Maybe you are looking for

  • Error while pulling report for particular dates

    hi i am trying to fetch report for the first quarter in incident management --> incident analyst i got an error the below error: On in-depth analysis i found out that this error occurs in the month Jan and Feb 2014 hence i am not able to pull the com

  • Can I put a WMV movie in an iWeb page?

    Search results on the topic in this forum seemed inconclusive to me. I would like to publish an iWeb site to .Mac with a WMV in one of the pages. I am aware that I can convert WMVs to QuickTime, but that's not my goal. I want a Windows user to be abl

  • Temporary file in Files panel

    Hi, but there is another problem, please. Somehow an file is showing all the time and corrupts my file. If I open Povedi.html from map, then is OK. If I erase the TMP3jqb2eg96d.htm, it comes back at once. If I try to open in browser from Dreamweaver,

  • Procedure call

    I want to call an existing function returning string_rtn. Would I be able to call this function in an update statement as is without rewriting the function to return just the a_string. I am using  Oracle 10.2.0.4.0 . Basically i want to call this fun

  • Screen saver + Energy Saver (Computer Sleep + Display Sleep) won't work since Mavericks

    Howdy, Sorry to bother you. My computer: iMac (21.5-inch Mid 2011), Mac OS X (10.7.3) It took me some time to upgrade to Mavericks, but I did it eventually. After having some problems with Spotlight (which was infinite looping indexing... and I just