Web Galleries on Photo pages?

I think I already know the answer is no, but... I much prefer the .Mac Web Gallery and it's options to the older photos page you create from iPhoto. I have converted a couple of albums to Web Galleries.
My questions is regarding putting those on a Photos page. I only seem to be able to put a Web Gallery on a blank page. Dropping it onto one of the default album spaces that pop up on a Photos page (where you drag in from iPhoto), of course, does nothing. My main reason is that I would like to consolidate Web Galleries on an Albums page - I really like the look of the albums themselves and it's a nice gateway. I have been able to make a rectangle, change it to a picture frame, resize it and use that, but it's not the organization I prefer, and, again, I'd like to have the gateway in those nice albums. Any advice would be appreciated. Thanks.

I'm searching the forum for a solution to this too; web galleries look cheap next to the albums, and there's no reason for it. Short of changing all of my albums to galleries, here's my temporary solution, but it's a half-measure:
1) Drop a square on top of your .Mac Web Gallery widget that's just a bit larger than the widget.
2) Select the square, and in the Inspector, go to the Graphic Inspector, and under Stroke, select Picture Frame.
3) Select the frame that matches your album's format, then resize the square until it's just about the size of the widget, or provides the desired border width around the widget.
4) Move the square backward, behind the widget.
5) If desired, add a dummy album name beneath the gallery for visual continuity.
See my example here: http://www.vehphoto.com/sandrift/Photos/Photos.html
This worked for me because I'm using a white background and white frames; your mileage may vary depending on what theme and picture frames you're using. (I can't recall if I enabled additional frames in the Inspector as described in the Keynote forums - if a matching frame appears to be missing in the Inspector, let me know and I'll double-check this.)
Still, it's a sub-optimal solution, because 1) the widget cannot be resized 2) the widget still contains the gallery name, and 3) widgets cannot be rearranged the way albums can - they probably have to be segregated from albums.
I'll be posting feedback on this at http://www.apple.com/feedback/iweb.html
Message was edited by: sandrift

Similar Messages

  • Links to Photo Pages Don't Work After Publish

    I have a page with different photos that I would like to link to different "galleries" (iWeb photo pages):
    http://www.spiritshopstaff.com/STAFFBASE/STAFFPICS.html
    The links to these internal pages work just fine within iWeb, but when I publish (I use Fetch to ftp the site to Yahoo host), the links no longer work.
    I created each of these photo pages using an iWeb template and dragging and dropping an iPhoto album to each page, and I suspect this may have something to do with it, but I really have no idea. Can anyone help me figure this one out?
    Power Mac G5   Mac OS X (10.4.8)  

    I meant that I use Yahoo web hosting, and I transfer all of my site files from my Mac HD to the host, via the Fetch ftp program.
    All of my site's pages were created in iWeb. The photo pages themselves are internal pages (within the site) that I purposefully left out of the site navigation menu in order to keep things clean. I want users to navigate to these different photo pages from a "gallery selection" page (the STAFFPICS page).
    All of the other links within the site appear to be working properly (hyperlinks are active).

  • Trying to figure how photos "travel" from iPhoto to my iWeb photo pages

    Greetings,
    I have I believe gotten t understand just about all I need for now about building web sites with iWeb and its templates (for now). Works well. I am publishing to my .Mac account (for now).
    Now, I want to fully understand how photos albums/pages are kept up/coordinated, on my computer, on .Mac Gallery and on the actual .Web site (on .Mac)
    Here what I have done so far in regard to posting and upkeeping photos (works well!):
    Selected pics from iPhoto >>> Made albums on my MBP
    Published Albums on Web Gallery
    Built website with iWeb
    Built photo pages/my album page (indexing)
    Inserted my Web Gallery albums into my website
    Published the whole thing on .Mac.
    My questions:
    *1. Somewhere in Tutorials, it says that: "with .Mac Web Gallery, you can get the shots you wish you had by allowing friends to contribute photos (from their browsers, email). And, whenever new photos are added, they are automatically sinced to your iPhoto08 library".* I am assuming same should/would happen when my iWeb site viewers upload theirs pics (which I am encouraging!) to my Web galleries via my iWeb site. I do not see that happen however. Web gallery gets of course updated by such uploads, +but NOT iPhoto library.+
    2. Some other iWeb Tutorial states *"If you are a .Mac member, you can publish photos/movies from iPhoto and iMovie directly to your Web Gallery. When a Gallery photo album is updated, your website is updated automatically with the new content."*. In the case of my site viewers' uploads to my gallery, works OK, but +my site's pages do not show the new photos.+. Any way to better coordinate my .Mac Web galleries with my (also) .Mac Web Pages?
    I hope this is clear enough. I have LOOKED for some more info/tutorial about iWeb/Web Galleries/Viewer photo uploads from my Web site, but have not founded anything specific.
    Thanks for any advice!
    - Roger Y

    _*Thanks a lot, Wyodor for your detailed reply.*_
    It just happens that I have gotten quite fond of the way iLife as a suite - along with its online (.Mac in my case) components) seem to keep a good, purposeful flow of things going.
    So, indeed, as I am currently looking at the stuff on my .Mac site, Web GAllery and My Pages respective materials are not actually linked in terms, especially, of allowing Web Gallery albums' updates to "flow" into My Pages areas.
    Too bad in a way! Unless I decide to use the Widget feature in iWeb to link my website photo pages specifically to Web Gallery albums - as suggested by Roddy. Currently I use iWeb template system - with Photo Pages and MyAlbums index.
    You stated:
    +"Your iWeb page shows the tiny player with your dotMac Webgallery.+
    +Click on the tiny player, and the full Web gallery opens."+
    Where is that button actually?
    "Your iPhoto library will be update updated vice versa."
    I'll have to check that out then!
    Thanks again!
    - Roger T

  • How can you develop photo galleries with multiple pages using the web module?

    Going through the web module I can see there are many options for developing a web page with a single collection of photos.  How can you develop a web site with multiple pages containing different categories of photos using the Lightroom web module?

    This thread will give you several ideas.
    Re: How do you embed a gallery into an existing website?

  • Web flash galleries display photos in LR4.2 but html galleries don't

    Web flash galleries display photos in LR4.2 but html galleries don't.
    I get a black screen with "Loading" instead. And the loading never ends.
    Help? Thank you

    Some galleries are displayed via JavaScript, so if they aren't working the make sure that you aren't blocking JavaScript.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).<br />
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Web gallery use vs iWeb photo page

    I really like the quick layout of the gallery. Would I be saving more iDisk space by using the Aperture Web gallery vs iWeb photo pages?? My guess is yes because I can control the size in page/detail and more when I save to my .mac. The only feature I would lose is the flow of navigation with the other iWeb pages.
    My thought was to create a main photo page with iWeb and have a small snapshot to hyperlink to the homepage.mac gallery created with Aperture. This allows flexibility in adding/removing the galleries if space becomes an issue. I dont have much in iWeb so far and it takes a really long time to load as it is. I'd hate to bog down more with photo galleries.

    hello, me100finn
    quote: "The only feature I would lose is the flow of navigation with the other iWeb pages."
    You can always manually make a link to the other web pages which is what I do.
    Just a few more added features to Aperture Web Gallery and Web Journal like an advance option feature to view & change the CSS or source code (without going to GoLive or Dreamweaver) or something along the lines of "would you like to add a link to another url?" would be tasty.
    quote: "My thought was to create a main photo page with iWeb and have a small snapshot to hyperlink to the homepage.mac gallery created with Aperture."
    Yup, my thoughts too. Maybe version 2 (i hope). I'm making the site first in Aperture (the heavy lifting) and then making minor additions and tweaks in GoLive.
    To do this add the image, select it after the export in a wysiwyg html editor and point it to the proper linked url.
    victor

  • Web Galleries and new iWeb album pages

    The new version of iWeb allows for "album" pages that serve as a collection of all the photo and mvies pages that are in a site. This is pretty slick, and allows one to re-order the photo pages exactly like one can re-order photos on one of the photo pages.
    I am playing with web galleries, and notice that you can create a widget for a gallery for any iWeb page. When I do this on my album page, the widget shows up, but does not act like or interact with the other picture pages. It is simply a "widget" that sits on the page where it is placed. Has anyone figured out how to get a (link to a) gallery to act like one of the photo pages?
    -=[doug]=-

    I'm searching the forum for a solution to this too; web galleries look cheap next to the albums, and there's no reason for it. Short of changing all of my albums to galleries, here's my temporary solution, but it's a half-measure:
    1) Drop a square on top of your .Mac Web Gallery widget that's just a bit larger than the widget.
    2) Select the square, and in the Inspector, go to the Graphic Inspector, and under Stroke, select Picture Frame.
    3) Select the frame that matches your album's format, then resize the square until it's just about the size of the widget, or provides the desired border width around the widget.
    4) Move the square backward, behind the widget.
    5) If desired, add a dummy album name beneath the gallery for visual continuity.
    See my example here: http://www.vehphoto.com/sandrift/Photos/Photos.html
    This worked for me because I'm using a white background and white frames; your mileage may vary depending on what theme and picture frames you're using. (I can't recall if I enabled additional frames in the Inspector as described in the Keynote forums - if a matching frame appears to be missing in the Inspector, let me know and I'll double-check this.)
    Still, it's a sub-optimal solution, because 1) the widget cannot be resized 2) the widget still contains the gallery name, and 3) widgets cannot be rearranged the way albums can - they probably have to be segregated from albums.
    I'll be posting feedback on this at http://www.apple.com/feedback/iweb.html
    Message was edited by: sandrift

  • Title photos of web galleries are not changeable?

    Dear everybody,
    I've been trying to change the "title photo" of some of my web galleries - that is the picture a viewer sees first when entering the gallery overview. Simply putting the desired picture in first place via iphoto doesn't do the job. Do you think it is necessary to create a new gallery each time I want to change the title photo?
    Help and ideas appreciated!
    Thanks in advance.
    Keywan

    Open iPhoto's preferences and go to the Web Gallery section. There you can change the overall name of the Web Gallery Title that is seen online.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • I want to upload my Jewelry photos and drop out their background to appear they are floating on a white background.  Can I do this in I web or I Photo to get that look on my Web Page?  Have 3.01 ver of I Web

    I want to upload my Jewelry photos and drop out their background to appear they are floating on a white background.  Can I do this in I web or I Photo to get that look on my Web Page?  Have 3.01 ver of I Web

    You will need a 3rd party image editor that can seletively remove the background and let you create a transparent background png file. Maybe with a drop shadow (or not) something like this:
    A photo of me during one of my therapy sessions.   If you have Pages (part of iWork) you can also make transparent background images with the Alpha tool..
    OT

  • Why are Photos belonging to a "Photos" page not visible on my Web Site?

    I have published all pages from iWEB 08. Some of the "photo" pages display fine, some only display navigation menus on a blank page. Has anyone encountered this problem? Any suggestions? If you would like to look: www.muraiart.com...navigate to "exotic places" or "Quantum Critters" links. Other linked pages display fine... Thanks.
    Luis

    Welcome to the Apple Discussions. What version of iWeb are you using and what browser?
    OT

  • IWeb Photo Pages vs. MobileMe Gallery

    I post a personal blog with quite a few pictures. Does anyone know the advantages to using an iWeb Albums/Photo pages versus using the widget to link to MobileMe galleries?

    You should look at the user experience. iWeb albums are attractive and easy for the user to use. Widgets can be useful for a quick way to link to an external gallery but as a user I would find it a less attractive option than the iWeb albums. Would you, if you were a stranger visiting the site, find one or the other option more or less attractive?
    The greatest advantage with any web page element is where the user finds something enticing, and therefore wanting to return to the site. You optimize with that as your first thought and then design accordingly.

  • Making a web gallery type photo viewer in encore

    Ay guys,
    so I'm relatively new with the whole encore thing. I know enough that I can make menu's, buttons, put in animations etc. the basics really.
    I'm wondering if theres a way to make one of my menu's a photo gallery kind of like this one
    http://www.filebuzz.com/software_screenshot/full/49904-FlexiGallery__XML_Flash_Image_Galle ry.gif
    Where the small ones at the bottoms are thumbnails and when clicked show up in the bigger one up top.
    i know photoshop has the ability to make web galleries but i wasn't sure if or how they could transfer over.
    Thanks and any info is greatly appreciated.
    Cheers. 

    For a Photo Gallery, I think that you will want to look a Adobe Bridge, Adobe Lightroom, and finally for publishing, Adobe Dreamweaver.
    Encore is a DVD/BD authoring program, and other than creating a DVD Flash, it will be pretty limited, doing what you want to do. You would end up with a very Menu-heavy Project (only get 1GB of Menus and navigation), and then is more suited for Flash Video on a Web page. You could possibly construct something, but it would be rather of a kludge, and also fairly limited. With those other Adobe programs, you will have much more latitude and far greater flexibility.
    Good luck,
    Hunt

  • Can't see web galleries in iweb

    I've published multiple .mac web galleries but don't see any of them listed in the widget list in iweb. What am I missing, do I have to do something special to see them?
    What's the best way to include my web galleries if I have a ton of them I want to list on my website?

    It may not be a bug but a feature to not display any photos that are acutally in the gallery when announcing a protected gallery. I don't know. But you can report by using the iWeb->Provide iWeb Feedback menu option in iWeb.
    If the gallery is password protected but your want a photo from the gallery to be in the link, add a small photo to the page, size it to a reasonable size and then link it to the web gallery. When visitors click on the photo link they will be taken to the gallery and have to put in a name and password before they can access it. You can email that info to them in a separate email.

  • Using Lightroom web galleries with iWEB

    Adobe Lightroom has a very nice gallery template that can be used to create a gallery page. It outputs the page to a folder with the associated files, includingindex.html.
    I would like to use this approach for presenting the galleries rather than the photo pages in the iWEB template I am using.
    I have searched here, the Adobe forums as well as some dedicated to photography.
    A solution escapes me.
    I have no interest in learning HTML or other website programming skills.
    I am looking for a cut and paste solution.
    Thanks.
    David

    Ok now I'm assuming you have a .mac account like you said. When you click on the icon of the idisk in your finder, close finder and open idisk from your desktop. Then go through the hierarchy as I said, and drop your folder in the final iWeb folder. The page has to generate at that point. Then do what I told you to do i.e. http..........to see the page. Once you get the established address of the page, copy it. Then go to your iweb doc and establish a page where you would have text and maybe an image to link to your new gallery. Go into your inspector click on make hyperlink active and and enable as a hyperlink when you either highlight your text you want or the image that's going to link to your gallery. This is going to be an external page you want to link to so put that in. Then paste your new gallery page address into the area to let it know. Let it know you want to open page in a new window...check that, and that should be it. But you must delete the apple address in the external page info thats already their. Also, what version of iweb do you have? I have '08. My external pages were with either iphoto or a photoshop web gallery.
    I hope I didn't confuse you further.....Good luck.....Christina

  • IWeb '08  Color of Photos on a Photo Page

    I installed iWeb '08 selected a template, choose the photo page, posted the photos but when I view them they are much darker and too red. Nothing like the original images.
    I can't correct them using the inspector as it does not work for photo pages.
    What can I do to display the photos in their original state? They look awful and I'm a professional photographer who uses iWeb to show clients my work.
    I only have this problem since I installed '08.
    Thanks for your help.
    Mighty Dog

    reported this to apple.
    hope they are gonna do something about it soon.
    they seem to have switched to the belief, that
    untagged rgb is evil rgb and has to be converted
    to some other profile....
    it´s really a pitty - iweb 06 did it in correct way.
    my web photo galleries have become worthless now.
    not professional any more.
    nikolaus

Maybe you are looking for

  • Need help in deleting multiple tables

    Hi, In one of my scenario i want to delete One record from the table, but there are some child and sub child exist for the table. And the on delete cascade is not set fro any of the table. Structure of my table, Table-1 tab1_pk tab1_name Table-2 tab2

  • Importing word document

    Hi all, I am trying to import a word document in robohelp html, but I cannot get the format I have defined for the document in word. After importing all format is gone and it seems that all lines are pasted after each other. is there any trick to "ju

  • Can we catch keyboard event triggered by an inputfiled?

    Hi all, I have a question here: When we are doing the web dynpro abap development, if I want to catch the keyboard triggered by an input help and handle it, how can I achieve this? e.g.   I have an inputfield on the UI,  if user click "F10" on the ke

  • Problems with 10.6.7 update

    Dear All, I had given in my MBP for a Hard drive update and subsequent to it being done updated all the software etc as prompted by Software Update. Prior to the hard drive update, I used to run Traktor Pro seamlessly and encountered perhaps one or t

  • Failing to start a powershell scripts from Start/Run

    So my real goal is to get a script that we've written to run in a scheduled task. Based on one of the early Scripting Guys blogs, I am working with Start/Run to get the syntax down. Here's what I am trying to do is run the command, capturing any outp