Web Gallery does not appear in File Automate

CS3. I used it a couple of times. Now it is not there. I reinstalled CS3 and it is still not there. I want to customize one of the templates, but cannot even create a show now. I searched all over Adobe's forums for hours and nothing. Can someone help
Also, Adobe's user interface for this and other forums is unfriendly, confusing and a step back into the Window's world. Amazing.
Thanks for any help,
John

Here's the fix.
[Mac OSX 10.4.11, 1.67 GHz PPC G4, 2 GB DDR SDRAM, 74.41 GB]
Copy the PhotoShop installer folder from the CD to your local drive desktop.
Repair permissions.
Restart in safe boot mode (cmd+shift on chime, hold it till you get the grey Apple and spinning fan thingie below).
Double click the Photoshop setup icon and choose to remove all components.
Copy all installers for whatever version of CS3 you have from the disks to your local drive desktop. (You can copy the goodies later). Takes 7 min. in my case.
Disable all fonts in your font management software.
Restart in safe mode and repair permissions.
Launch the Photoshop installer. Install it. With the other installers on the desktop, the in
Restart normally, repair permissions. Test it. Enable fonts. Test it. Done.
I will reserve my comments on the forum since this is not the proper place.
Feel free to email me if you want to discuss. Peace.

Similar Messages

exception-type in web.xml does not appear to work

WLS 60 SP1 (#101616)
          <exception-type> in web.xml does not appear to work. WLS shows standard
          "Internal error 500" page instead of a custom error page. The custom error
          page is shown if <error-code> is used instead of <exception-type>.
          Any ideas? Thanks


Can you show me some of your code? This works for me.
Also, you say that you are working with 6.0sp3. Are you sure? sp3 hasn't been
released yet, except in a very limited beta. (I believe only internally, but I
could be wrong about that.)
David
[email protected] wrote:
Hi all,
I have created a very simple servlet and an index.html file with a link
to it, then packaged it into a WAR file with the appropriate web.xml and
ias-web.xml files. I then created an application.xml file referencing
only this servlet and adding a context root. After deployment via
"iasdeploy deployapp simple.ear" and cycling the web server, I can reach
the welcome file (index.html) correctly
-"http://localhost/NASApp/simple". When I attempt to follow the link to
the servlet ("simple servlet") the URL ends
up as "http://localhost/NASApp/SimpleServlet" whereas it should be
http://localhost/NASApp/simple/SimpleServlet If I type that url in, the
servlet executes fine.
I've deployed this into Tomcat and get the behavior I expect. It appears
that the element in the application.xml file is ignored by
iAS.
I'm using iAS SP3 on Win2k (same problem on NT).
This is such a basic behavior that I can't believe this is an existing
bug. I must be doing something wrong...
Any ideas?
Thanks in advance,
-Glen
Files are attached.
Name: simple.ear
simple.ear Type: application/x-unknown-content-type-ear_auto_file
Encoding: base64
Description: filename="simple.ear"

Album uploaded to my Photoshop web site does not appear in album order

Album uploaded to my Photoshop web site does not appear in album order, although after it is configured
through the sharing function, it is in the correct order.

Do matters improve if you update to iPhoto 9.4.1?
iPhoto 9.4.1
From the release notes for the new version:
What's New in Version 9.4.1
Improves the reliability of syncing to iOS devices via iTunes
Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command
Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars
Resolves an issue with downloading and viewing photos synced from Facebook albums

Forms 10.1.2.0.2: Web Form does not appear at Runtime with CALL_FORM

Hello there,
We have a number of forms we're executing as web forms using Oracle JInitiator 1.3.1.22. We have one form in particular that, when a button is pressed, is supposed to call another form via the CALL_FORM built-in.
We are passing a parameter list to the new form, and executing the CALL_FORM built-in with these Setting Parameters:
CALL_FORM( formmodule_name => '<OUR_FORM_NAME>',
           display         => NO_HIDE,
           switch_menu     => NO_REPLACE,
           query_mode      => NO_QUERY_ONLY );When we run the starting form as a web form (via JInitiator 1.3.1.22), and press the button to call the other form, all buttons on the starting form are greyed-out/disabled. The called form does not appear.
I have carried out a number of checks with my own debugging tool (stored procedure writing messages to a table via an autonomous transaction), and forms focus is definitely been transferred to the called form. For example, the WHEN-NEW-FORM-INSTANCE trigger in the called form is definitely being executed.
I suspect this problem is JVM-related rather than Forms-specific. My current plan of attack is to request the Application Server Logs tomorrow morning (I don't currently have access to them) and see if I can find any Java-related error messages. However, if any of you reading this have experience of this type of problem and can offer any assistance, please don't hesitate to let me know your suggestions/advice.
Cheers.
James

You could check the settings of the window in the calling form. If its set to "Modal" or "Dialog", and the window in the called form has other settings, the new window might be opened "behind" the old window.

Lightroom 4.1 flash web gallery does not work in 32 bit Internet Explorer 9.0

I have a web site with a Web Gallery I created in Lightroom 4.1. . The Web Gallery will not work in the IE 9.0 32 bit browser. It does work in the IE 9.0 64 bit browser. Also, all other flash material seems to work fine in my 32 bit browser such as Youtube and other flash sites material. I have a flash menu created from another product on my web site which also works fine in the 32 bit IE browser but I cannot get the Lightroom Flash Gallery to work in this browser.
Any suggestions?

I am not sure to know where I can do this ...
is it this ?: I selected all images
unfortunatly result is the same ...

Photomerge function does not appear in "File New" menu. Where is it?

I cannot find the photomerge function in PhotoShop Elements 11. It used to be found in File > New > Photomerge, but now it does not appear there. Where can I fine it?

In PSE 11 those have all moved to the bottom of the Enhance menu for some reason.

Blade 6000 ILOM web ui does not appear correctly in firefox 7

Cannot see correctly ILOM web ui nor in firefox 7 (Win or Linux) nor in IE9.
In other words any control (f.e., Remote Power Control) and any info (f.e., System monitoring/Indicators) does not appear in the frames.
Firefox 3.6 works fine.
I've upgraded ILOM to ILOM-3_0_12_11_a-Sun_Blade_6000 ant got the same result.
May be anybody have already faced with the issue?

if you have ILOM 3.0 then consider these ;
TABLE: Supported Web Browsers
Operating System Web Browser
Oracle Solaris (9 and 10) • Mozilla 1.4 and 1.7
• Firefox 1.x and later
Linux (Red Hat, SuSE, Ubuntu, Oracle) • Mozilla 1.x and later
• Firefox 1.x and later
• Opera 6.x and later
Microsoft Windows (98, 2000, XP, Vista) • Internet Explorer 5.5, 6.x, and 7.x
• Mozilla 1.x and later
• Firefox 1.x and later
• Opera 6.x and later
Macintosh (OSX v10.1 and above) • Internet Explorer 5.2
• Mozilla 1.x and later
• Firefox 1.x and
and remember to check JRE , to run the Oracle ILOM Remote Console, you must
have the Java 1.5 Runtime Environment (JRE 1.5) or later version of the JRE software
installed on your local client.

CS4 Web Gallery, Uploaded gallery does not appear

I was wondering if anyone can help me with the Web Gallery that Bridge CS4 produces.
I have used Bridge CS4 to create a web gallery. After Bridge has finished creating it the result is a folder called Adobe Web Gallery. Inside that folder is an index.html file and a folder called resources. If I double click on the index.html file the web gallery opens in Safari (Mac). So all is good so far, it tests OK from my hard drive.
Then I upload it to my ISP server using Fetch, as I did when using the Photoshop CS3 web gallery automate feature, which is upload the index.html file and the resources folder with all of its content into a folder on my isp members area. I then create a link to the index.html file. When I try the link it produces a blank page in Safari called " Adobe Web Gallery", and the rest of the page is blank.
When I upload the files with Fetch I copy the exact structure as they appeared in the folder on my hard drive. I have tried to upload the gallery directly from Bridge CS4 but Bridge does not seem able to create a connection with my ISP.
In the meanwhile I am still using Photoshop CS3 to do my web galleries, I 'd just like to get the CS4 version operating as it looks like a better product.
I am using a Mac Pro Quad duo 2.8 with 4 G Ram.
regards
David

Try it this way:
Re-name the folder called Adobe Web Gallery to a name which is more appropriate for its contents; then upload the complete AWG Folder, with all of its contents, to your ISP Server.
Now create a Link (with an appropriate label) on the main index page (Home page) on your site and link that "Link" to the index.html in your new Gallery folder.

Web gallery does not work

Hi,
Problem that I have ... is difficult to explain so picture :
As you see when I click under the web gallery and I selected a flash galery or imported web galley (exemple here is airtight simpleviewver...) ... the screen in the middle box keeping black ... nothing more ...
here more you can see there is a problem : it's when I click under flash galery ... see middle box ... there is no photo adding ...
Only htmml galery appears in the middle screen :
Previously it worked I saw when I clicked under airtight postcardviewver web gallery ... all my photo getting on the middle screen ...
Now it only works with html lightroom gallery .... I don't know why
More when I click under preview in brower some galery works but some not ... when I said not ... the result is a black screen in IE or firefox ...
I tried to uninstall and re install lightroom but result is the same .
Lightroom version: 3.5 [775451]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Physical processor count: 8
Processor speed: 2,1 GHz
Built-in memory: 8106,1 MB
Real memory available to Lightroom: 8106,1 MB
Real memory used by Lightroom: 269,1 MB (3,3%)
Virtual memory used by Lightroom: 390,6 MB
Memory cache size: 0,0 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1600x900
Someone can help me please ?

I am not sure to know where I can do this ...
is it this ?: I selected all images
unfortunatly result is the same ...

Web page does not see SWF file

Hi, I am wondering if anybody can point me in the right direction?
I have created a web page with Indesign which includes some animation.
When I export it to SWF format it creates seperate HTML and SWF files.
I have moved these two files, together with every other file I used in creating the document to my web host (Hostmonster). I have read on other threads that I probably should have a RESOURCES file, I don't have one.
When I go to my home page, I get a grey screen, which Hostmonster inform me is because the HTML cannot find the SWF file.
Anybody got any idea what I may be doing wrong.
Thanking you in advance.
Warmest regards
Peter

Hi Bob,
Thank you for taking the time to try and help.
I uploaded the files and folders using Filezilla.
The above image was a screen sho under Hostmonster that shows that my files are indeed there.
I also came across a folder for SWF which I believe belongs to the main website (cliveread.com) and put my file in there, it does not make any difference.
As you will see in 3 both my HTML and SWF files are there.
As a novice I hope you can help.
Warmest regards
Peter

Ipod does not appear in file manager

I have an iPad Mini running OS 7.0.4. I can no longer see this in File Manaager under Windows 7. yet iTunes is fine with it. Any ideas?

When I try to restore it comes up with an error message (there has been a range of numbers). The I touch works, just not with itunes.
Sometimes it recognises and tries to restore. Other times it does not recognise.
I have read on a forum to change the letter assigned to a drive but I cannot see a letter assigned in the disk manager to be able to reassign.
I have changed and reinstalled the Apple mobile device support .
The problem seem to start after an update.
I have spent hours trying to solve this, any advice would be great!

APEX 4.2.2 development tool bar at bottom of Web App does not appear

Oracle 11gR1
Linux RedHat 6.3
Apex 4.2.2
Firefox 20.0
When running my application from within APEX as a developer, the APEX bottom bar does not show up. Hence, I can't (from the app web page) edit or move to another part of the Web App.
Wondering what could be causing this?
Just upgraded from 4.1.1.
Any help would be appreciated.

tx103108 wrote:
Oracle 11gR1
Linux RedHat 6.3
Apex 4.2.2
Firefox 20.0
When running my application from within APEX as a developer, the APEX bottom bar does not show up. Hence, I can't (from the app web page) edit or move to another part of the Web App.
Wondering what could be causing this?
Just upgraded from 4.1.1.See +{message:id=11003722}+

Selecting html input type=file in web form does not open a file browser on ZTE Open

While trying to files from ZTE Open, I browsed to a web page with a file upload form. When I selected the file input, the input behaved as a text input and the on screen keyboard appeared.

We are working to make Firefox OS better. This feature is not currently available but will be available in future updates to the device.
Thank you for contacting Mozilla Support.

Bridge flash web gallery does not take crop data

Hello,
I have been using bridge and Photoshop for many years and made many flash galleries. Lately, using CS5 I have noticed that in some cases, the crop and image adjustments information entered in bridge/photoRaw is not taken into account when make the Flash gallery. Whay is interesting is that the keywods are read correctly, also, in Lightroom, the crop information is read correctly for the same directory.
Has anyone seen that ? Any setting that I'm missing?
Thanks
Vincent

I am not sure to know where I can do this ...
is it this ?: I selected all images
unfortunatly result is the same ...

Title does not appear in Lightroom web gallery

Hello, I have the "filename" set as the title in the web gallery (under the "Image Info" panel), but it doesn't appear in the preview window. It also doesn't appear when "filename" is set as the caption. Both the caption and title fields are blank. In fact, when I change the text to any of the other options (sequence, date, etc), still nothing appears, the field is blank.

Geoff:
I just did a test and the filename does not appear:
http://www.rokeachphoto.com/test2/
There should be a filename under the large image, but nothing...
I'm probably doing something wrong.
Barrie
Barrie Rokeach
499 Vermont Ave.
Berkeley, CA 94707
510-918-0809
[email protected]
Read the S.F. Chronicle's recent profile of me:
http://www.sfgate.com/cgi-bin/article.cgi?f=/c/a/2011/04/04/DD2G1IOGK2.DTL
aerials: www.rokeachphoto.com
corporate: www.rokeachphoto.com/corporate
special events: www.rokeachphoto.com/specialevents
art: www.rokeachphoto.com/Art

Web Gallery does not appear in File Automate

Similar Messages

Maybe you are looking for