Web gallery max out at 500 images

Hi, I'm using LR 3.5 and when I creat a web gallery it maxes out at 500 images, even though there are 776 photos in the gallery and all 776 are selected. In fact, the image number below the preview shows 1/500 instead of 1/776. When i look at the uploaded website it also only shows 500 images. In Library mode I see all 776 images, and also in Web mode I see all 776. When I switch from Library to Web I see the "Update Web Gallery" in the top left corner of the window. It shows the progress window: "Export image fliename-001" and continues up to image 500, then stops. So it appears it is only exporting 500 images.
Thanks in advance for any help.

Hopefully you appreciated I was being semi serious! Many pros would see part of their job being to whittle a big shoot down to a reasonable number to present to the client, and secondly I'd question if going through a slideshow in sequential order is the best way to review a large number of pictures - better than a grid of decent-sized thumbnails? Those are obviously judgement calls and I don't like a 500 limit being imposed.
Now, to make your updated version survive Lightroom updates:
Copy the Flash gallery's folder
Paste it into Win C:\Users\john\AppData\Roaming\Adobe\Lightroom\Web Galleries or Mac Users\john\Library\Adobe\Lightroom\Web Galleries
In galleryinfo.lrweb, change the ID - just add your initials
In galleryinfo.lrweb, change the title to something like "Flash Gallery (edited)"
When you restart LR, you'll see "Flash Gallery (edited)" in the Layout Style panel
John

Similar Messages

IPhoto 08 and Web Gallery are out of sync.

I used iphoto to upload 3 events to web gallery last night, and left it go over night. I selected the first event, and clicked on web gallery and it started to upload. I then clicked on another one while the first was uploading and did the same. Both events were listed in web gallery, one was syncing in progress, the other just had a spinning sync icon. I then added a 3rd event to the list to sync, which appeared under web gallery as expected, so I went to bed.
I woke up this morning and iPhoto exited. I checked my web gallery and found the 1st web gallery I synced was fine. The 2nd gallery existed, but contained both the 2nd and 3rd events. I then loaded iPhoto and it has no entry for the 2nd album in web galleries. So now I have an album on gallery.mac.com that I cannot control from iPhoto (including deleting).
Anyone have any ideas on what to do? I submitted a feedback form for iphoto, but it says don't hold my breath on a response. So I'm hoping someone here can help me.
There are 61 photos in the album I cannot control.
Regards
Simon

I have found an answer thanks to jaxjason in this post:
http://discussions.apple.com/thread.jspa?threadID=1086973&tstart=0
Go to web gallery, find out the album ID that you need to delete.
iDisk -> Web -> Sites -> _gallery
Delete the album ID of the albums that arn't in iphoto.
Then resync the albums missing.

Query Builder results seem to max out at 500 lines. How to change?

Hi all,
Some of out Application Express users are using the Query Builder tool for ad-hoc reporting. The idea is to run the SQL to extract the data, then download to MS Excel. The Query Builder results seem to max out at 500 lines. I want to increase that value. I searched all Application Express forums for 'query builder output max 500' and then 'query builder output' and did not find the answer.
How do I change the 500 line limit in Query Builder results?
Thanks!
Application Express 3.1.2.00.02
Oracle 10g
Standard PDF printing (not BI Publisher)

Bryan,
Here is a link to an HTML-DB studio application, that is a QBE "replacement" for the query tool in APEX development..
http://htmldb.oracle.com/pls/otn/f?p=18326:7:1387557504245687::::P7_ID:1222
It is for an older version of APEX, but you should be able to make it work for your needs..
Thank you,
Tony Miller
Webster, TX

My adobe cs4 bridge web gallery is not displaying the images

This is how the web page is displaying. Any advice would be much appreciated!
http://www.ascentwithautism.com/html/gallery.html Once on this page, please click the "Web Gallery" text at the top of the main content section or the image on the right
Thanks!
Michaelangelo7777

give us a screen shot with the camera icon above (in reply window).

Web gallery with links to hires images - possible?

Hi all,
I would like to use a web gallery to "deliver" hires images to clients, meaning that I want to have a preview page with thumnail images that should link to hires jpeg or even tif images for download. I found, however, that Aperture web galleries seem to be limited to maximum 1200x1200 jpegs for the detail page.
I know that there are ways to customize web galleries so I thought there might be a solution for this anyway? Like putting in a link to the hires image in the detail page?
Any hints appreciated
Alexandra

I made a good step forward regarding this type of customized template: I found that the image size restrictions can be changed in the "albuminfo.plist" file, and I can also edit the link on the gallery page that points to the detail page.
But: Both gallery page and detail page use the same tag to refer to the image they are displaying: "ThumbImageURL" which seems to be interpreted differently in different contexts: In the gallery page it refers to the thumbnail (as expected) and in the detail page it refers to the larger image. This seems to indicate that there might be something like LargeImageURL"...
Is there any kind of documentation to the tags used for web galleries in Aperture?

CPU maxing out with Google Image search, some other websites

When I try to use Google Image search or load SBNation website articles, Firefox's CPU usage maxes out and it becomes unresponsive for a good 10 seconds before it has loaded everything. This is a new problem that has popped up within the last few weeks.
I've tried disabling all addons and plugins, removing cookies, clearing cache, downgrading from the beta version to 23 and none seem to make any difference.

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Slide Shows in iLife, iPhoto, iWeb '08 and Web Gallery

I have iLife '08 abd thus iWeb '08 and developed my website in 2006 using iWeb '06. I also belong to .Mac and therefore have access to that Web Gallery or .Mac Gallery (unsure which name it has). I like the newer slide shows/carousels that are newly available and would like to know whether I can make such slide shows and place such slide shows in my iWeb website.
I realize that another alternative is to make a slide show and put it in the Web Gallery and access it in my website via a URL pointing to the slidehow.
Is it true that ALL OF THE VARIATIONS OF SLIDE SHOWS are created in iPhoto '08? If so, then I guess if I make the slideshows there, I can decide where I want to place them (in my website or in Web Gallery).
~ Lorna in Southern California
http://web.mac.com/lorna6

I have found an answer thanks to jaxjason in this post:
http://discussions.apple.com/thread.jspa?threadID=1086973&tstart=0
Go to web gallery, find out the album ID that you need to delete.
iDisk -> Web -> Sites -> _gallery
Delete the album ID of the albums that arn't in iphoto.
Then resync the albums missing.

In Web Gallery, Flash Template how can you remove the "sequence"?

Also, how can one use a flash gallery for more than 500 images?

See http://www.lightroomforums.net/index.php?topic=195.15
However, do you really expect someone to run through more than 500 pictures online?

Looking for FULL SCREEN flash web gallery template

Hi,
I'm looking for a plugin for PS to make full screen flash gallery, something similar to this:
http://www.paulvanroekel.nl/picasa/CoolFullScreendemo/index.html
anyone know of any? free would also be good
Cheers,
TBK

You don't need a plug-in – there are dozens of free web gallery generators out there.

Meta data & Exif data in MobilMe Web Gallery - where did it go?

I can't seem to get web gallery to publish the meta data with the photos. When you visit the web gallery website, clicking on the image thumbnail reveals options to click the "i" button which supposedly allows viewers to examine meta data & exif data.
I would be greatly appreciative if someone could confirm or disconfirm this issue for any web galleries they have created.
Thanks in advance,
CD

The only way that I get EXIF etc metadata to show up on the information page in web galleries is to enable downloading of images. This seems to do the trick in making the info page work. I have not tried disabling download in the settings, republishing, and seeing if the image metadata still displays. Just one more quirky thing about webgallery - what really stinks is there is no way to get Aperture to put downloadable images with an sRGB profile into a webgallery. Even if the original is an sRGB it converts the downloadable version to AdobeRGB.
RB

Brigde CS5 in Windows 7 64bit - drops out photos in Web Gallery preview

Is there a limit to the number of photos that web gallery will display? I created a web gallery and then started over again as instructions I read stated that I should put the TITLE on each photo. Once I put the title in, out of 24 photos that use to display, only 20 now display.
Can someone explain why this is happening? I haven't even gotten to the point of trying to embed in my website yet. Perhaps Bridge isn't the best tool to use?
Thanks to anyone who can offer any insight as to why this is happening.
Daisey

And right you are! After posting this message I started reading through all the help files and finally did find the same answer. Now my problem is the linking as I have a very strange hosting set up. Two sites, same directory. So all my images have broken links. Something new to work out!
Cheers!
Daisey

How do I change filename for single-image HTML pages in web gallery for LR 3

Hi,
I would like to change the default filename for the HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to remove the string "_large" from the HTML filename, so it corresponds exactly to the image filename.
Specifically, the URL by default is like this:
http://www.mysite.com/content/_c_EMT2146_large.html
and I would like it to be like this
http://www.mysite.com/content/_c_EMT2146.html
I assume there is some way to make this change using the template editors, but I can't figure it out.
thanks,
James Riemermann

Turns out there's a fairly easy way to change that on Windows, but I can't figure out an equivalent on a Mac, which is where the need is. On windows, I can edit (after backing up) the following two config files:
C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.6\Shared\webengines\default_html.lrwebengine\grid.html
C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.6\Shared\webengines\default_html.lrwebengine\manifest.lrweb
In which the "_large" string is appended and can be removed, following which the gallery works exactly as I would hope.
But I can't find the equivalent files on the Mac, though I would assume they exist.

How to add title/caption to each image in Bridge web gallery

Hi,
I am creating a web gallery within Bridge and I want to add a title and caption to each image in my web gallery. How do I do that? The only thing I see is the Site Info. section and that adds a title and caption to the entire web gallery (including each image) and I want different titles and captions for each image. There must be a simple way to do this I just haven't figured it out yet. Any help would be greatly appreciated. Thank you!
ashmic19

Thanks Curt Y for your help. The thing is I have to use only Bridge. I looked up this problem on http://www.experts-exchange.com/ and they said it was not possible to add titles and captions for individual images (slides) in a web gallery in Bridge. They seemed to imply that this was overlooked. So I input what I could based on what was provided by Bridge and turned it in. Thanks to all who viewed and replied to this post. I appreciate it.
ashmic19

Link to high resolution image in web gallery

Hello.
Is there any way to include a link to a high or full resolution image using the web gallery creation tool? (similar to the option available in various jAlbum galleries)
So sorry if this is a repeat question...
Lightroom 1.3.1
OSx 10.4.11
Thanks!

Check out the galleries at The Turning Gate http://www.theturninggate.net/. Matthew has at least one Gallery, AFAIK that does what you want.
Don
Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D See LR Links list at http://donricklin.blogspot.com for related sites.

No image Metadata when outputting from Bridge Web Gallery (CS4)

I use the Web Gallery option within the Output module in CS4 Bridge to process my photos to the image size I want for uploading to flickr. However all the metadata data gets stripped out.
Is there an option I am missing to retain metadata?
Of course I can add back in any IPTC data I want, but I should not have to do that more than once, what I am really annoyed over is the Camera Data (EXIF) is gone.
Software Details:
CS4 Bridge (3.0.0.464)
Output Module
Web Gallery (Standard or HTML Gallery)
Mac OSX 10.5.7

_kabel_ wrote:
The goal here is to automate the process of resizing my photos for upload to a flickr account.
Look into the Image Processor in Bridge or, better yet, install Dr. Brown's Services 2.0.2, a free, brilliant set of scripts by the same author as the Image Processor, Russell Brown. It's like the Image Processor on steroids.
http://www.russellbrown.com/scripts.html

Web gallery max out at 500 images

Similar Messages

Maybe you are looking for