Web input tool for Essbase?

Hi there,
I am wondering if there is any web tool that I can use to writeback to essbase. Currently we are pulling dashboards from Obiee with Essbase integration. But it doesn't support writeback. I am wondering if there is any web tool that can be used to input into essbase. Appreciate your suggestions and advice,
Thank you,
SR

Hi SR,
look here:
http://www-01.ibm.com/software/analytics/cognos/executive-viewer/
and for planing etc. also:
http://www.cubus.eu/?language=en
By the way...
EV is a realy cool software.
Oracle could have done a good deal, when they had purchased this tool/technologie. Unfortunately they have not and now it is owned by IBM. Too bad.
Andre

Similar Messages

Performance monitoring tool for Essbase

Currently we are using Zabbix to monitor the resource usage of Essbase database (CPU, memory, disk IO, etc).
We would like to know is there are any other web based monitoring tools that can monitor down to process level. The existing Windows performance monitor is relatively complex and also lack of web based interface for administrator to monitor the processes easily.
We are also looking at Quest Spotlight for Windows but not yet fully explored its capability. We would like to know if there are other choices used by other Essbase administrators.
Thanks in advance.

Jbooth wrote:
Please review the following thread where I wrote a bit about monitoring tools - Re: Monitoring System 9.3.1 Availability
Regards,
JohnThanks John! I don't realize that Hyperic is a open source freeware for monitoring. I will try this way.

Web Developer tools for Firefox

Hello again!
Okay so I downloaded and installed Firefox and then tried to download the web developer tools recommended by Nadia (http://chrispederick.com/work/web-developer), but apparently I don't have the program to open the .xpi file to install these tools. Any advice?.
Thank You!
Beau

Well there you have it tadaaa!
Thank You Very Much!
Beau

Documentation Tool for Essbase Applications

Are your Essbase applications adequately documented? Are you interested in a tool that facilitates documenting Essbase models? Faced with the Herculean task of documenting a very complex planning model for a recent customer, I developed this great tool that I wish to share with other Essbase users. Contact me.Farid [email protected]

Hello,If you're interested in sharing a free utility with the community, we have a utilities section of the Essbase.com Web site. Please send email with utility, overview information, supported platforms and Hyperion Essbase versions to [email protected] Thanks!Kimberley Kent,Essbase.com Administrator

Easy web application tool for database access

Hi Experts,
I am a ABAP developer and not a web application developer. I want to learn to create web application using databases.
Considering I am not a web application developer; which tool in the market do you think is the best to start learning?
Which is the best shareware? Is there any graphical interface tool?
All advices would be helpfull. <REMOVED BY MODERATOR>
Thanks,
Franc
Edited by: Alvaro Tejada Galindo on Jul 22, 2008 12:14 PM

Hi Gregor,
Thanks for the reply,
I was wondering would it be possible to host the web application developed by web dynpro independent of the SAP software? What I mean is, say if I want to develop a small web application like adress book using a SQL database, would it be possible to develop it using the web dynpro without having to host SAP software?
Thanks,
Franc

Need to turn off web dev tools for a moment

i download all i need and got ahead of myself and was just suppose to turn on debugger then well i did more the that now cant get onto phone as i have just the debugger on

Support profile is here:
https://daw.apple.com/cgi-bin/WebObjects/DSAuthWeb.woa/wa/classicLogin?appIdKey= 58ef9db8ff4d201409e7270a68e4408ae1678e1618204c476572a1b5e5fb3518&path&language=U S-EN
She would have had to register the phone using her Apple ID/password.
Changing her Apple ID password is the only other way to fix this if you don't have access to the phone.
You can also "try" calling AppleCare.

Why are web developer tools not available on Firefox for Android?

I do some freelance web design. I just replaced my laptop with a tablet last year (Samsung Galaxy 10.5 S). I want to do web development on it - I work from a terminal doing Ruby on Rails and web development all the time. It would be awesome to have the F12 developer tools handy in Firefox for Android, but sadly I've waited for a while and there is no indication they will ever appear.
Do NOT suggest using a remote debugger - I'm not testing the layout of pages on my tablet, I want to be able to profile, view source (without an add-on) and such. I have seen this exact question marked closed by suggesting remote debugging, and I fail to see how telling me to use my tablet next to a laptop or desktop is a solution. Telling me to carry a second device means I don't need the tablet at all, when my intention is to ONLY use the tablet.
My tablet has a huge screen resolution and a powerful processor - more powerful than some laptops? Why is Firefox for Android neutered? I would understand disabling it by default to help those with less powerful devices, but why remove something that would add a competitive edge to your product, and is already integrated in desktop Firefox and has been for years? I prefer Firefox, but if Chrome adds web developer tools for Android first, I'll switch to Chrome.
There are people today using a tablet as their sole computing device. Please do not relegate us to a second-class Firefox experience!
Thanks,
Ryan

Hi Ryan:
Thanks for the developer tools feature request
This is a user support forum not a developer tools forum therefore I am locking this thread.
Please file your developer tools feature request on the developer tools uservoice at:
https://ffdevtools.uservoice.com/forums/246087-firefox-developer-tools-ideas
Cheers!
...Roland

Fixed Asset web based tool

Hello SAP Guru,
Is SAP provides a webbased tool for fixed asset transactions. If yes, can you provide me a link for documentation. Sorry as I cannot find anything in the net.
Thanks!
Jhero

Hi,
there is no general web based tool for FI-AA transactions yet.
The only web based function in regards to transactions in FI-AA is the functionality for Internal Service Requests in Asset Accounting, you can find more about this in the SAP Help Portal @ https://help.sap.com/saphelp_erp60_sp/helpdata/en/01/57e23cab43ba5be10000000a114084/content.htm?frameset=/en/4f/71db6644…
Regards,
Markus

UCCE 8.5(2) web setup tool issue - HTTP Error 404.0 - Not Found

Folks,
I have installed UCCE 8.0(1a) along with 8.5(2) MR twice in a row. I dont receive any errors during my installation, the second time around I had all my prerequisites including OS patches, Visual Studio, SQL 2005 SP4 patching and everything written down from the first go around and was able to complete the install with zero errors.
But once I complete the install and click on the Web Setup Tool I get a
I am not sure what I am doing wrong, Apache is running, this is for my lab system and we just got our Production system installed a few months and I compared all my version with the Production system at work and they all look the same, only difference is that this is going to be a sprawler. But I havent even gotten to that part yet.
I have attached images of the specs my Lab Server , any help is greatly appreciated, I am stumped at this point ..
Hardware Specs and OS
Installed Programs

Folks, apologize for not following up on the responses, works gotten busy again. Anyways .. the requirement is described in the "Staging Guide for Cisco Unified ICM/Contact Center Enterprise & Hosted Release 8.x(y)" on Page 104.
It states " Do not install Internet Information Services unless the server will host WebView or UnifiedICM multichannel options."
One thing to note is that in Version 8.5 - Web View is no longer supported, which means - Do NOT Install IIS on your AW's HDS, DDS, Router or Logger or Rogger Servers since these use the Web Setup tool for installation and configuration.
I would say dont install IIS on any of your ICM servers period !
After some poking around and research I found out that Web Setup uses Apache Tomcat and the Web Setup does not like it when you have IIS running or installed on the same box.
I fixed mine in my lab with Fresh install of the OS (from scratch). For those who cannot afford a fresh install and have this issue on a Production Box, Uninstalling IIS does not seem to fix the problem. Prior to my Fresh Install I tried Uninstalling it and it did not work.
While I have not tried this trick out, I found out that having IIS and Apache creates some sort of conflict for port 80/ 443 on the server which results in these 40X errors that you see. Unfortunately Uninstalling IIS didnt seem to fix it in case. What I did find out is that there is some way of resolving the conflict and one way is to change the default port used by IIS (changing it from 80/443 to something else).
I have not tried this out, But I have heard that this might work. Also to note - based on my uninstall of IIS which did not fix the problem, changes are that Apache Tomcat may need some tweaking as well.
My guess is the default port used by IIS and Apache need to be worked on to resolve this issue on a production box. IF you can scarp the box and rebuild, then just dont install IIS and you should be fine.

Tools for tracking web management tasks

Sorry this is off-topic, but this is one of the few web
development forums I can post to from my work PC due to filtering
restrictions. It's on-topic from the point of view that we are a
Dreamweaver development team.
I am looking for input on a job tracking tool for our web
management team in a government agency. Ideally the tool would need
to run on .NET (ASPX/MS-SQL). We currently use an old clunky Lotus
tool that is being phased out.
Our basic needs are:
integration with LDAP/Active
Directory
customisable client job creating form
with multiple file attachment
email integration with Microsoft
Outlook
client area to check on progress of
jobs via a browser
developer area to view allocated
jobs, advise progress and post replies
admin area to get reports on job
status, progress, etc
ability to re-assign jobs based on
status - e.g. development, QA, test, publish
If anyone has found such a tool, I'd really appreciate a
point in the right direction.
Thanks
Tony

Hi Fangnaka,
You can use JWDSP2.0 + Tomcat 5.X +Jdk1.5 to develop and deploy webservice.
Better IDEA are Intellij or Eclipse for webservice code development.
Cheers
Rajesh R

Need information on open source testing tools for ADF web applications

Hi experts,
I need to investigate on new feasible open source Java testing tools for testing ADF web applications. I have tried to google a lot but getting confused.
My requirements as as under:
1. The tool must be open source.
2. It should be easy to understand and to work upon by the tester and developers.
Selenium based testing approach is already in place for testing the application but need to search for tools other than Selenium which shall prove suitable for testing ADF applications. Kindly let me know your inputs / suggestions.
Thanks a lot in advance.
Neelanand

Hi,
Have a look at JMeter http://jakarta.apache.org/jmeter/index.html
1. The tool must be open source.It is.
2. It should be easy to understand and to work upon by the tester and developers.I guess it is.
There are some specifics in configuring it for ADF, but Chris Muir wrote a nice blog about how it's done, check it out http://one-size-doesnt-fit-all.blogspot.com/2010/04/configuring-apache-jmeter-specifically.html
Pedja

IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

Mapping input values for a web service connection to a range of cells

I've created a web service connection in Xcelsius data manager. My web service requires an array of integer as input parameter. How do I map input values for a web service connection to read from a range of cells in the spreadsheet, e.g. $A$2:$A$20, in similar way of mapping output values to write to a range of cells in the spreadsheet?
For output values of the web service, I can specify to map the output values to write to a range of cells. However, it doesn't seem to work for reading the input values.
I can map input values for each node to a single cell, e.g. $A$2, in the spreadsheet. However, when I set the "Read From" field to a range of cells, e.g. $A$2:$A$20, it only reads in the first value in the range.
Is there any way that we can do this mapping for input values as we do for output values?
Your assistance is very much appreciated.
Regards,
Van

Van,
There is a workaround for that...
Example:
My Webservice accepts input data range in a specific format with " :" symbol, i.e. 072008:082008
Now what i do is
A1 = 072008
A2 = 082008
A3 = CONCATENATE(A1,":",A2)
so A3 = 072008:082008
Now i map the input value in web service to cell A3
P.S have 2 input box components and map it to cells A1 and A2, i.e you are giving users an option to enter the range of values...then web service will capture the range and refreshes data with the range of values user entered.
hope this helps..
-Anil

What is the required internet bandwidth for Endeca Web Acquisition Tool

Hi,
What is the required internet bandwidth for Endeca Web Acquisition Tool.
Regards,
Suresh.

I would expect the tool to work within the constraints of the bandwidth available. Low bandwidth = slow acquisition.

Web Services Test Page: No input fields for SOAP header parameters?

Hello,
we're using OracleAS / OC4J 10.1.3.1 and have developed a web service that has some self defined SOAP header parameters.
I would like to use the Web Services Test Page provided by the OAS but it seems that there is no opportunity
to provide input values for these SOAP header parameters.
Do I miss something there or is it not supported by OAS?
I've read the documentation but could not find a clue.
any help is appreciated,
Regards,
Martin

I hear you. As you have probably heard, OC4J is being replaced by WebLogic Server and the 10.1.3.x releases are the last that will be produced. We'll do maintenance on it of course, but little/no new feature work. This would be a new feature we'd have to add, so I'm afraid there's not much chance in having it done.
It's not ideal, and of course more work for you, but if you want to provide your client with a test page that exposes the SOAP headers as form fields, you could always develop and ship one yourself.
-steve0

Web input tool for Essbase?

Similar Messages

Maybe you are looking for