Web Interface Builder: export planning data in excel

Hi,
we like to export our planning data in excel from a WEB Template. Do anyone knows whether it is possible or not?
In the web interface builder I only could add the function button with an exit export in excel. Have anyone experience with the abap coding or where I can find more information about the coding?
Any help where appreciate,
Klaus

Klaus,
I have found this problem. I decided to add an additional tab in all the layouts, with the same layout but defined in Excel (where you have the button to export to excel).
I have defined this excel layout as "no ready for input", because he have found that the performance openning an excel layout in web is terrible.
I see that is the same answer as you have received. But just say that we have had same problem, and that's the only solution that we have found.
Regards,

Similar Messages

Releasing locks when using "Navigate Pushbutton" in Web Interface Builder

Hi
I am creating a basic BPS application in Web Interface Builder for manual data entry into a Cube.
I have a requirement for a user to navigate away from the data entry screen to a "Start Screen". To do this, I am using the "Navigate Pushbutton" component.
When the user navigates away from the data entry screen, I want the locks to be released. I have attempted to do this using the "End Command" attribute of the Navigate Pushbutton to "True". According to the Help for this attribute, the following should happen:
" When this property has the value TRUE, the page context will be lost when you press the pushbutton (and all locks are deleted)."
However, when I look at the locks in SM12, I can see that the locks remain, even after the user has clicked on the Navigate Button.
Therefore, it would appear that the "End Command" attribute does not release the locks when it is set to True.
(By the way, I have also tried setting it to false, but the same issue occurs).
Has anyone got any advice on how I can solve this?
(We are running BW 3.1).
Thanks in advance for any thoughts.

Hi,
You are correct this is standard functionality that should work. Please post the solution proposed by SAP.
As a stop gap you can look at this topic
User Lock BPS Web interface
thanks

Export WEB Template in Excel in WEB Interface Builder

Hi Experts,
is it possible to add a web template with the pushbutton "Export in Excel" in a web planning layout?
So i have to do a web interface with a planning layout under which i have to insert a web template and a pushbutton with "Export in Excel" functionality.
Many thanks,
Fabio.

Hi Fabio
This is possible in Web Application Designer. In the WAD you have an option of selecting the "Export" command that allows you to select the file format you'd like to export to: Excel, csv, txt or PDF.
So you could consider pulling your layouts/queries into WAD and use this option.
Srikant

DATA SAVED UNLESS ERROR MESSAGE IN WEB INTERFACE BUILDER

Dear collegue,
IN SEM-BPS THERE is a fox that executes a control on the data inserted
in the layout. In planning folder when the data are not corrected there
is a message that lock the date and data cannot be saved.
In web interface builder there is the message (with icon "STOP") but the
wrong data are saved however. This is a serious problem.
regards,
DG

Dear DG,
when using planning folders there is the feature to run a function upon leaving a layout and upon save. In order to forbid saving of data in case of error the function has to run upon save - and that feature is not available in WEB based planning.
You can add it by implementing the how to paper "How to run planning sequences on save and other events". You can find it in the service market place http://service.sap.com/~sapdownload/011000358700004491692004E/HowToRunPlFuncOnEvent.pdf.
This should solve your problem.
Regards, Olaf

Insert excel worksheet in web interface builder

Dear all,
I want to insert my planning package inside my web interface, and I don't know how to fill the planning level fields ?
With F1 I got the following information
The planning level of a selector is automatically transferred from the
components which have a reference to this selector as an attribute
value. If several components have a reference to this selector, the
value of the attribute "planning level" must match for all components.

Hello Pavel,
the web interface builder calls the web interface very similarly to an external browser. So if you HTTP and ICM setitngs are not correct (yet), the web interface can not be displayed in the builder.
Regards,
Marc
SAP NetWeaver RIG

Style display problem in Web Interface Builder (OWC)

Hi,
I wanted to create my own styles for my BPS Planning Layouts and then
use it in the Web Interface Builder on Office Web Components.
Step 1 : I saved a Planning Layout in my hard disk.
Step 2 : I created my styles as explained in the SEM BPS help notes (->
Format, Styles ) and saved it in Excel.
Step 3 : I used UPP_MASTER_CHECKIN in tn se38 and then
UPP_LAYOUTS_UPDATE_WITH_MASTER in order to apply the master template in
all my layouts.
Step 4 : I put my styles in all my layouts in the BPS0 (for Lead
Columns, Head Datas and Data Columns).
Step 5 : Once I generated my layouts in the BPS0, the result was what I
expected : the styles were right and at the good place. I checked
publish for the WEB for all the layouts that needed it.
Step 6 : I created a Web Interface with BPS_WB using my layouts as
Office Web Components (Web Excel : true)
Step 7 : I generate my Web Page
And when I look at my layouts the styles disappeared....
However if I modify the Standard Styles (SEM-BPS-headata or SEM-BPS-
sub1 for example)and put them in my layouts then it works !!!! The
modified styles appear in the Web Interface Builder.
I do not understand why it works with the standard styles and not if I
create and put my own. Did I something wrong or missed a step or is a problem with SEM BPS ????
Thank you for your help
J-Michel

Sorry that note say :
Styles. Consequently no changes to the SAP standard styles are taken over to the OWC
I try fix that problem too, go check new design in BW-BPS.

How to make a form for input in web interface builder

Hi expert:
How to make a form for input in web interface builder?I have already used it to do PS planning, but I don't know how to draw lines and checkboxes . Thanks in advance.
Allen

WAD:
Open the WAD and create a new template. On the left hand navigation you will have several Web Items available. Under 'Standard' you have 'Analysis' item. Pull that into your template to the right. Under the Properties tab you need to pick the query [form/layout] that you have built in Query Designer.
You will also find other items such as Button group, Checkbox, drop down, list box etc available. Pick and drag into the template whatever it is you require. Lets say you want a button. Under the Properties tab select the 'Command' that you require. You could use standard commands that are available there. You could also define functions and commands that you require.
Query Designer:
Open the QD and drag the characteristics and key figures that you require into the rows and columns of the QD. You would need to specify restrictions under the Filter tab of the QD based on the granularity of data that you require. You would need to remember that the key figures need to be made Input Ready [do this by clicking on KF and on the planning tab select "change by user and planning functions"].
This shouldgive you a start. After you've explored it yourself a bit we can discuss further and I can certainly provide you additional details/material on these areas.
Srikant

Variables in BPS populating the template built using web interface builder

Hi All,
I have a issue :
I created some variables in bps0 (under a planning area) based on Fiscal Year, Fiscal Year/Period, Posting Period, Cal. Yr /Quarter and Version.
Then I created a template using the web interface builder .
The end user goes and puts the varaibels in the SEM template and that will run the BW queries in BW (ABAP code has been written to popluate the values entered in SEM tempalte in to BW variable screen).
Now the problem is it works well for all values other than for #(not assigned).
What should be done to make it work even for #?
We do not have # as the value in master data for all the above info objects. We have # only for 0version and for the rest I can't even see the master data as it says " master data is not maintained" .
when I come back and look in bps0 then I see that the values entered in the SEM template are getting accumulated in selection conditionds in bps0 (when we click on the variable then when we see the selection conditions there it is getting accumulated)
Can anyone please suggest a solution to make the # (not assigned) work and to clear the selection conditions table after refresh of the SEM template?
Thanks
Sri

Hi
You should create a BEX Web Query and integrate it in the upper level of WEB Layout.
Check this link for a step by step guide about this topic
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/how-to%20guides%20-%20rig%20official/bi/nw04/how%20to%20integrate%20bex%20web%20applications%20into%20bps%20web%20interfaces.doc
Ciao
Andr

The URL in the web interface builder

Hi
In the web interface builder in BPS there are several components.
When I click on them one by one I can see the planning functions and other details.
There is a URL present in the web interface builder which corresponds to upload flat file data.
How can we trace what are the planning functions used for this link.
If we go to se80 how can we find whats the applicable BSP page for this particular URL which corresponds to a planning function.
Please advise.
Many thanks.

Hi,
From URL you can't find the details of planning objects. BUt you can find the BSP application that gets executed from that link and in that BPS application you can see the planning objects that are used in various events to upload the file data.
Regards,
Deepti

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

Range of Variable in Web Interface Builder

Hi,
I have created a Web Interface Builder in BW-BPS. I have created Cost Center as a Variable. However, I am unable to get this range of cost centers say 1001 to 1005 in Web Inteface Builder.
Whereas, in the Planning Folder, this works fine and I am able to select the range of Cost Centers from 1001 to 1005.
The issue is only with WEB INTERFACE BUILDER.
Looking forward for some valueable inputs.
Regards,
Ravi

Hi Mayank,
Thanks for your reply.
I will also look at the different options given.
I also found the following thread is more useful.
BSP Value Help Input Field and Select-Options Ranges
I will let you know on this.
Regards,
Ravi

Web Interface Builder & Variable???

Hi,
Can someone help me to resolve this two issues.
I try to create variables by using web interface builder.
1)The variable- company code-US100, CA100 are only ones I use in the selection of my planning leveL. However, it shows all possible entries for the variable-company code when I added the variable-company code in the web interface builder.
2)Another variable-forecast year, I created it in the planning area (using 'fiscl year') and try to add this variable in the web interface builder and got an error message-the selection to 0fisclyear is not 'restricted'.
Advices are appreciated.
J.

1) Set "Planning level" property of selector for you variable in web interface builder
2) Restrict fiscal year

Web Interface Builder, error if use in Browser

hallo,
I can customizing in Web Interface Builder. But if I try to execute in the Browser (start Planning) than I become the following Logon error - Massage :
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
How I can customizing that.
Where I can create a user ID.
Please can anybody give me step by step introductions.
Please don't say that I have to refer to the admnistrator. I'm alone.
I hope somebody help me.
thanks

HI,
now it is result an other error.
"Error when processing your request"
Is this normal?
I have activated the application (it was inactive before)
In the TR ST22 is the text for error "CX_BSP_HOST_NOT_QUALIFIED"
What that mean?.
thanks.
Message was edited by: oesi yol

Web Interface Builder+BPS+BSP

Hi All
I need some online study material for Web Interface builder(BPS_WB transaction).
I have to design a interface for the Planning .can any one send me some link
or PDF's for the same .
I need documents for web Interface Tool(Builder) BPS and BSP
If any step by step discription is there then i will be thankful
My mail id is [email protected]
Regards'
Saurabh


Hi
 
Please check out the following URL: 
http://help.sap.com/saphelp_sem40bw/helpdata/EN/c4/b2af6569e64418a21bd0ab4d83be83/frameset.htm
 Hope it helps.
 
Cheers
Abhijit * It's a good habit to reward someone with points in SDN if you think his/her
response was helpful to you

URL functionality in Web Interface Builder for BPS

Hi,
I have web enabled a planning folder and in the Web Interface bulider I am trying to enhance it. The clients requirement is to be able to select a file by clicking on a URL on a shared drive, based on variable selection. The file name is smart coded
e.g.
the files may reside in
shareddrive\
if the value in variable for version is 100, then the url should be "
shareddrive\100.xls" and on cliking on this url, the file should open
if the version value is 200, then the url should be "
shareddrive\200.xls".
In the Web Interface builder, I have created subcomponent 'URL'. If I give a fixed path for the URL say "
shareddrive\100.xls" and clicking on it opens the file.
I am however unable to parmeterize it. I tried using Javascript in the "Goto URL" attribute, but it doesn't work
Any help is appreciated.
Thanks,
NS

Hello Nimmi,
here's an example that adds a button to launch the file. "VarvlSel1" is the technical name of the variable (dropdown box).
Regards,
Marc
SAP NetWeaver RIG

<a href="#1" onclick="open_file();return false;"
class="urBtnStd" id="OpenButton1" ct="Button"
style="white-space:nowrap;"
OnMouseOver="javascript:window.status = 'Open File';return true;"
title="Open File">
Open File
</a>

<script type="text/javascript">
function open_file () {
var variable1 = document.all("VarvlSel1");
var value1 = variable1.options[variable1.selectedIndex].text;
var url1 = "
sharedrive
folder
" + value1 + ".xls";
// alert(url1);
var window1 = window.open(url1,"Window1","width=310,height=400,left=100,top=100");
</script>

Web Interface Builder: export planning data in excel

Similar Messages

Maybe you are looking for