Web interface in BPS

hi all,
when i try to execute the web interface, it says that This program cannot display the webpage.
please help me in resolving this problem.
thanks,
Rk.

Hi,
In your system go folder
C:\WINDOWS\system32\drivers\etc
You will find Hosts file there. Open that in notepad.
Make a new entry below all the text there as below
<BW server IP> <the part of the URL starting from the word after http:// till the word before :>.
For Eg.
155.125.30.245 grd.mysap.pg.com
Save the notepad file.
Now run the interfece.
Get back if problem persists.
Thanks,
Mihir

Similar Messages

  • Web Interface Builder+BPS+BSP

    Hi All
    I need some online study material for Web Interface builder(BPS_WB transaction).
    I have to design a interface for the Planning .can any one send me some link
    or PDF's for the same .
    I need documents for web Interface Tool(Builder) BPS and BSP
    If any step by step discription is there then i will be thankful
    My mail id is [email protected]
    Regards'
    Saurabh

    <FONT FACE = "Tahoma", Font Color = "Blue">
    Hi
    <Br>
    Please check out the following URL:<Br>
    <U>http://help.sap.com/saphelp_sem40bw/helpdata/EN/c4/b2af6569e64418a21bd0ab4d83be83/frameset.htm</U>
    <Br>Hope it helps.
    <Br>
    Cheers
    Abhijit<Br>* It's a good habit to reward someone with points in SDN if you think his/her
    response was helpful to you</FONT>

  • Variable Selection For User in Web Interface for BPS

    Hi All,
    I've created a manual Input sheet in BPS0 to upload target sales. User need to select the month, plant and then enter the target amount for each category. Its working fine.
    Now I need to create web interface for user to upload the data every month. Using BPS_WB I've created the interface (with help of Wizard). I'm getting the input sheet. But I'm not able to get screen where user can select the parameters?
    How to get this? It should work like web report, where user select the report variables then execute. Only difference here is user will have to enter the data for selected variable.
    Thanks in advance.
    Regards: Gaurave

    Hi....add the variables to a folder along with the layout. Then create the web interface.

  • LIST OF VALUES not Populating in BPS WEB INTERFACE ( LAYOUTS )

    Hi BI Guru's
    I have created a WEB interface for BPS in BI ( version 7.0) .  But when i execute this in internet explorer, I do not get the LIST OF VALUES for Material. 
    When I click on "input help" the system open a new window for "Value selection".  When I specify the material code, it gives me blank LIST OF VALUES.
    But it is working for other fields like Customer, UOM in the same layout.
    Please suggest some solution.
    Thanks,
    Nilesh Labde

    hi,
    Thanks for the reply.
    Master data is avaliable for the Material Code.  The problem is in Internet Explorer and not in SAP GUI .
    If i run Planning folder for the same layou in SAP GUI it is working fine.

  • Web interface displays via Portal using Mozilla or Firefox

    We have several web interfaces (BW-BPS) and have created iViews on our Portal (EPP 6.0). These iViews properly execute in IE 6.0.
    However, when we execute the BPS iViews using Mozilla or Firefox we see significant display discrepancies. For example, the web interface should display grid lines between the rows, but, we don't see them when running through the Portal using Mozilla or Firefox.
    We thought that the Web interfaces themselves may be the issue but they properly execute when run straight from BW in Mozilla 1.7.13.
    Can anyone help with this problem? Thanks,
    Bill

    Hello Bill,
    first of all please check the Product Availability Matrix. Not all browser versions are supported. http://service.sap.com/pam
    Some visual differences between the browsers can not be avoided since browsers just behave differently.
    If the browser is supported and it does not work correctly, please open a customer message.
    Regards,
    Marc
    SAP NetWeaver RIG

  • Trigger a process chain when user clicks on save button in web interface

    Hi All,
    This is a issue I'm facing with the BW BPS web interface.
    BPS web interface generates a BSP application so thought posting this question in BSP forum might get some responses.
    The issue is I have to trigger a process chain when the user clicks on the save button on the web interface.
    I have no clue how BSP works. So if anybody has any ideas or suggestions I would greatly appreciate it.
    Thanks,
    Harini

    Hi Dhanya,
    This is the code i have in the ABAP program in the process chain. I just included the API_SEMBPS_POST part, but still it doesn't work. Please give me your email address so that i can send some screenshots.
    REPORT  ZHTEST.
    DATA: l_subrc TYPE sy-subrc.
    DATA: ls_return TYPE bapiret2.
    CALL FUNCTION 'API_SEMBPS_POST'
    IMPORTING
       E_SUBRC         = l_subrc
       ES_RETURN       = ls_return.
    CALL FUNCTION 'RSAPO_CLOSE_TRANS_REQUEST'
      EXPORTING
        I_INFOCUBE               = 'ZMAP_TAB'
    EXCEPTIONS
      ILLEGAL_INPUT            = 1
      REQUEST_NOT_CLOSED       = 2
      INHERITED_ERROR          = 3
      OTHERS                   = 4
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • Web Interfaces can be displayed incorrectly in QA system after transported

    Dears,
      I transported Web Interfaces for BPS from D system to Q system. I activate the BSP application in transation SE80 and activate the service node in transaction SICF in Q system. However, the BSP can't be displayed correctly with NO_METADATA_AVAILABE error.Also, I test the HTTP service in Q system, it works well. The transport steps I followed:
    1) change the package of BSP application (SE80 D system)
    2) write transport entry to new request (SE80 D system)
    3) switch the correspoding service node to new object directory entry (SICF D system)
    4) transport the request to Q system
    5) activate BSP application (SE80 Q system)
    6) activate BSP service node (SICF Q system)
    Am I missing configuring something? or completely wrong steps? Any suggestions are appreciated.
    Best regards,
    Gerald

    I resolved it myself

  • CSS in Web Interface Builder

    Hi Guys,
    I have very strange problem and hope you have had experience with it.
    I am trying to set a CSS file in Web interface for BPS application. When I create a custom.css file it is impossible to import it into the web interface. The problem is that when I open Theme Root property of the page I see only 5 SAP predefined templates. Does somebody have an idea how to show my generated custom.css file in theme root property?
    Thank you very much in advance.

    Hi,
    Have a look at the OSS note no 830251.
    Check the below link also..
    http://help.sap.com/saphelp_sem320bw/helpdata/en/25/286075ad5441e6b22bfe53b421e271/content.htm
    Regards,
    Siva.

  • How to call a BPS Web Interface with predefined selections

    Hi,
    I have read and try to implement the "How to... call a BPS Web Interface with predefined selections" but it is not working.
    I have one Web Interface called ZXXXXX, then I created one BSP and copied the ABAP code into the Layout screen.
    I checked the ABAP and it concatenates and fill the variable l_url, but the page is not displayed.
    l_url = /sap/bc/bsp/sap/zxxxxx/zxxxxx.htm 
    I have checked that I have no errors in the BPS variables and its values.
    It just opens internet explorer and the page displays "<<<" in the top of the screen.
    I am working with BW7.0 and BPS 3.5.
    If anyone can help me it will be rewarded,
    Thanks a lot,
    Fernando

    I think the problem is in the last part of the code.
    <frameset framespacing=0 frameborder=0 border=0>
    <frame src="<%= l_url%>" name="x" framespacing=0 frameborder=0 border=0
    marginwidth=0 marginheight=0>
    </frameset>
    It is doing nothing in this point, but the ABAP fills correctly the l_url variable.
    Thnks

  • BPS Web Interface don't show multiple documents for each cell

    Hi gurus,
    I have an issue... we are trying use text documents from BPS on the WEB interface. Everything works fine, I can input text documents on each cell on the web, and from Query as well.
    I saved several other documents from the query for the very same cell, and I can see these other documents from BPS itself or from the Query by clicking on the title... but on BPS WEB interface, it shows only the last text document saved.
    Is there anything wrong on the configuration, or is it possible for the WEB interface to show the titles so that the user can choose which document he wants to open?
    Thanks in advance,
    Chen

    Hi Luke,
    did you check whether the document attributes are generated for your Characteristics?
    AWB -> Documents -> Administration -> Generated Properties
    There is also a SAP Note 431126, which you might want to consult.
    Regards,
    Eric

  • How to find the size (and sizelimit) BPS web interface

    Hello.
    We have build an application with the SEM-BPS webinterface builder.
    In the past we had problems with the size off this application. After we had added some new tabs in the application the size limit had been exceeded and the web inteface could not been activated. So we had to remove the new tabs into a new webinterface.
    Now we have to add again some new tabs into the webinterface application. That brings up some questions.
    Wat is the sizelimit of the webinterface application?
    Can we change this limit?
    How can we know the size off the current application?
    How can we find out the size of a separate tab in the webinterface? (So that we can make a prediction of the size which will be added to the web interface)?
    Thanks and regards,
    Eldo.

    Trevor.Dennis wrote:
    John, are there already differences?  I thought 13.1 was mainly about retina display support, but I guess there would also be other fixes released while they were at it.
    Yes, definitely already differences. I sympathize with Photoshop instructors (online and offline).
    The headline change was Retina support but that was also made available to non-Cloud versions.
    Other Cloud-only changes in 13.1 are listed here
    http://helpx.adobe.com/photoshop/using/whats-new.html
    http://psd.tutsplus.com/articles/news/cs6_1/
    Non-Cloud CS6 users have been very vocal and disgruntled about some of these changes.

  • Open Bex workbook from BPS web interface,How hard it could be?

    Hi all,
        I want to add a link or function-button in my BPS web interface,hope it could open a query(excel analyser),I tried 2 methods as follow:
       1. MIME , It can only open a static excel file, not a analyser query. I gave up this method.
       2. I use the program RRMX_START_EXCEL and add a plan function which is a EXIT in BPS0,in my EXIT function I used some code in  RRMX_START_EXCEL,I test it in BPS0 ,it works ,it can open a analyser excel query.But when I put this plan function(including a parameter group ) in BPS_WB ,when I click the function-button in web interface, it crashed,says:
    Error when processing your request
    What has happened?
    The URL http://bw1.:8000/sap/bc/bsp/sap/zwebcaxa001_998/page1.htm was not called due to an error.
    The termination type was: TH_RES_FREE
    and some other Error infomation,
    Is it possible to realize my requirement? or Web interface and analyzer are just 2 total differrent things ,it is not possible to realize this?
    thanks all

    Hi Denny,
    Have a look at www.javascript.internet.com and do a search for "whatfile".....
    This should give you the javascript code whereyou can enter a file name (say an excel file name) and click a button to navigate to it.
    Although I have not tried exactly what you have asked, I have successfully used parts of this code to open specified files (excel files) on our local directory from a BPS planning web page.
    Obviously you will need to adapt the code to your specific evironment/situation...
    Good luck.
    Rael

  • SEM-BPS 6.0 BPS_WB generate Web Interface BSP

    Hi all,
    We recently had a redirect of the portal connected to our NW04S BW development system and had worked thorugh the issues on the portal side so existing Iviews works (SEM-BPS 6.0). 
    We are now creating some new iview for a new applications but I cannot generate the BSP page.  BPS_WB say that the BSP was generated correctly but when I try to test it, it says that http entry is missing and would I like to add it and when I say I do, it fails since I cannot generate a node under SICF since I do not have the authorization.  I did an SU53 check and asked for 01 create on S_ICF_ADM but getting a lot of questions since 01 on S_ICF_ADM is reserved for Basis only on this project.
    Another thing we are also concerned with is that some system settings that need to be done on the BW side might now have been done although Basis said all entries are changed..
    I have to admit that the last time I worked with someone to set up portal connection to BPS was back in 2003 so I have to dig pretty deep into my memory and had been doing some quick searches but have not found anything obvious yet that would solve the regeneration issue except for the authorization addition which they are very hesitant about.
    Any information or thoughts on this issue / problem would be appreciated.
    Thansk,
    Mary

    Hello Mary,
    I still work on BCS, so dont have BPS here. What I can do is to give you a summary of those things I had done in the past. Maybe it helps?
    I gues you know that there are 2 diffren types of nodes: System nodes to enable connection to the web and the node for each web interface.
    The required system nodes are describes in OSS 517484. I guess you have released them? Since BW Release 3.5 the web interface works with HTMLB. I guess you have activated thise too?`So the last possibility is from my point of view the web interface itself.
    The node for the web interface existis already?
    /default_host/sap/bc/bsp/sap/<your_web_interface>
    In develop system the web interfaces will be activated manually normally. But in Prod automaticall because of not allowed customising. If the web interface has created such an entry already I think the only chance is to give the web interface another name in Development system - or to delete the existing node in the prod system (dangerous).
    If this is not your problem, maybe another consultant has an idea?
    regards
    Eckhard Lewin

  • Web Interfaces: BPS-Hierarchy: Collapse/ Expand all nodes

    Hello,
    having a bps hierarchy in a web interface, is there any way to collapse/ expand all nodes at once (via a button)?
    Cheers,
    Simon

    Simon
    Web interface does not support the collapsing of hierarchy.
    it will automatically expands hierarchy.
    Thanks,
    Raj.

  • BEx Web Applications in BPS Web Interfaces

    Hi all,
    I need to make a BPS web interface which enables the business user to see data in the BW system while posting the budget items in BPS. This is to be done in the Web, and I have therefore tried to implement a solution for the customer following the instructions in the HowTo-paper: "How To.... Integrate BEx Web Applications into BPS Web Interfaces".
    The report is displayed when the interface is executed, but the variable which I have included in the code does NOT have any effect on the BW query (which is a surprise to me) but rather only on the BPS Web Interface (which is no surprise to me).
    The above results in two questions:
    - What part of this code needs to be changed for the variable to take effect on the BW query as well as the BPS Web Interface:
    <iframe
        id="BWReport01"
        name="BWQUERY"
        src="/sap/bw/BEx?
        cmd=ldoc&TEMPLATE_ID=ALLOK_CHECK2"
        width="1200"
        height="600">
        Frames are not supported
    </iframe>
    <script language="JavaScript" type="text/javascript">
        var frame  = document.getElementByld( 'BWReport03' );
        var url    = '/sap/bw/BEx?cmdldoc&TEMPLATEID=';
        var filter = '&FILTER_IOBJNM=0PROFIT_CTR&FILTER_COLLAPS=&FILTER_VALUE_EXT=';
        var '1000/'  = '';
        var appl   = 'ALLOK_CHECK2';
        var varvl  = '%=descr(VarvlSel1_pctr/value)%>';
        var convert = /\((.*)\)/;
        convert.exec(varvl);
        if ( RegExp.$1 != "") varvl = RegExp.$1;
        url = url + appl + filter + comp + varvl;
        url = url.replace(/ /,"");
        frame.src = url;
    </script>
    Particular areas where I am in doubt (in squared brackets):
    [  var '1000/'  = ''; ]
    [  var convert = /\((.*)\)/; ]
    - has anyone had any experience in using the Selector Package (SEL_PACKAGE) rather than the Selector Variable Value (SEL_VARVL)? In case you have, how is it implemented in the HTML-code?
    Looking forward to hearing from you guys soon.
    Best regards
    Rune Rygaard

    Hi Rune,
    Here's what I found - I'm not sure it will solve your problem, but maybe it can give you some hints:
    <b><iframe
    id="BWReport01"
    name="BWQUERY"
    src="/sap/bw/BEx?
    cmd=ldoc&TEMPLATE_ID=ALLOK_CHECK2"
    width="1200"
    height="600">
    Frames are not supported
    </iframe></b>
    I think the section above in bold has to be deleted and replaced by the one specified in section 3.3 of the how to paper: <iframe id=BWReport03" name="BWQUERY" src="/sap/bw/mime/....</iframe>. The reason is the your defintion will display the report, but will not take any variables into consideration.
    Furthermore you're missing a '=' in your code (cmd=ldoc) - I marked it in bold below. What you could also do was to add an alert to display the URL generated by the javascript. I added that in bold as well. That can give you an idea of whats missing.
    Hope this helps,
    Jacob Lund - DK :o)
    <script language="JavaScript" type="text/javascript">
    var frame = document.getElementByld( 'BWReport03' );
    var url = '/sap/bw/BEx?<b>cmd=ldoc</b>&TEMPLATEID=';
    var filter = '&FILTER_IOBJNM=0PROFIT_CTR&FILTER_COLLAPS=&FILTER_VALUE_EXT=';
    var '1000/' = '';
    var appl = 'ALLOK_CHECK2';
    var varvl = '%=descr(VarvlSel1_pctr/value)%>';
    var convert = /\((.*)\)/;
    convert.exec(varvl);
    if ( RegExp.$1 != "") varvl = RegExp.$1;
    url = url + appl + filter + comp + varvl;
    url = url.replace(/ /,"");
    <b>alert (url);</b>
    frame.src = url;
    </script>

Maybe you are looking for