Web JetAdmin page counter/paper usage

I suddenly inherited responsibilities from fired printer administrator and can't figure some really basic thing in WJA - I need to create monthly paper usage per printer report, but can't get necessary data... "Report" function give me bogus numbers. :/ It seems, that fired guy just used "Page Counter" - he noted value at the beggining of the month, and at the end. Not very elegant or sophisticated way of doing this, but whatever get the job done I guess... Anyway, is there a way, to get this sort of data from specific day (start of the month) without scheduled data gathering? I'm short on time, and can't figure this out with WJA manual.
Sorry for my bad english. :/

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Jetdirect board here:
http://h30499.www3.hp.com/t5/Print-Servers-Network-Storage/bd-p/bsc-254
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Installing Counter on Web Gallery Page(s)

Is it possible to install a 'counter' on iPhoto 08's new Web Gallery pages -if so how does one go about doing that?

You can create a simple iWeb page with a counter and with a widget link to the iPhoto gallery like you see in this test page.

How do I get a page count from the HP Photosmart 5514?

How do I get a page count from the HP Photosmart 5514?

Simple. Access the printer web gui by typing in the printers IP address into your browsers address bar. Select Tools/Usage reports. Done.

Is it possible to calculate paper usage on my new HP Office Jet Pro 8620?

I would like to calculate our paper usage on this new printer. Is there an easy way to do it?
This question was solved.
View Solution.

The printer's embedded web server (EWS) page will provide information on the pages printed. To access the EWS simply put the IP address of the printer into your browser. Select the Tools tab and click on the "usage report" on the left side.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

WRE54G Web Config Page Setup - also Belkin Router F5D6321

To: Users of this Linksys Community Forum
What: I'm reposting my "reply post" text from a previous post (see below). The first time I posted it, I forgot to use "html carriage returns", so the text was hard to read. The proper carriage-returns should show in the text below.
Original Post User Name: bfin1
Original Post Date-Time: 10-13-2007 08:43 PM
Original Post Message Subject Header: Re: Hi, I have a Belkin Router F5D6231-4 2.4GHz, 802.11G Wire...
Original Post Thread User Name: fabiote
Original Post Date-Time: 10-13-2007 10:02 AM
Original Post Message Subject Header: Hi, I have a Belkin Router F5D6231-4 2.4GHz, 802.11G Wire...
The original text (with carriage returns) is shown below --->:
Before you access the Range Expander's web page, you need to gather some information (that you'll need once you do access the WRE54G web page).
You need:
1) The "IP Address" (of your Router/Wireless Access Point as seen by your local network). This will be something like "192.168.1.254" (depending on your local network's range of IP addresses).
2) The "Sub-net Mask" (for your Router/Wireless Access Point as seen by your local network). Usually, this will be "255.255.255.0" (or "255.255.255.255").
3) The (Default) "Gateway" Address (for your Router/Wireless Access Point as seen by you local network). This will usually be the "first" IP address in your network's range of IP addresses. For our example network above having a range of IP addresses of 192.168.1.1 through 192.168.1.255, the first IP address is "192.168.1.1" and so the "Gateway" Address will probably be "192.168.1.1".
4) The "SSID" (Site Survey ID) of your network. This is the network name of your local network (i.e. the one you originally logged onto the network if you've already connected your computer wirelessly up with the router/wireless Access Point).
5) The "Channel" your Wireless Access Point is using (from "1" through "11". A typical "Channel" used is "6".
6) Wireless Network Encryption - you need to know if you are using encryption on your wireless network. You'll most likely either not be using it or your will be using either 40-bit (really 64-bit) WEP (Wired Equivalent Privacy) encryption, 128-bit WEP encryption, or the newer standard WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) security settings. When you get to the WRE54G web-based configuration page, you will need to "enable" Security Settings (if yoiur using it) and then, in the next web config page that appears, enter WEP encryption key or enter the WPA-PSK pre-shared key used that is currently used for your local wireless network.
NOTE: In the WRE54G web configuration page, if you are using encryption, BEFORE you enter the info (into the web-page configuration fields) noted in Item 1 through 5 above, you will want to click the "enable" button for "Wirelss Security", then click on the "Edit Security Settings" button, enter your encryption key on the next web page that appears, and then click on the "Save" button at the bottom of the web-page. The WRE54G will save your security setting to its Flash memory and then re-boot itself. You may want to unplug/replug the AC power to the WRE54G at this time and then re-log in to the WRE54G at its IP address of 192.168.1.240 (which I will explain how to do below).
Before accessing the WRE54G web-based configuration page by pointing your web browser to "192.168.1.240", do the following:
A. Connect the Ethernet cable that came with the WRE54G Ver.3 to the WRE54G (lift the small lid on the top of the WRE54G and plug the Ethernet CAT-5 cable into the RJ-45 jack there). Then plug the other end of the Ethernet cable into your computers RJ-45 jack (I assume your computer has one, right?).
B. Change your computer's IP Address to use a "Manual" IP address rather than "DHCP". Then enter the following "static" IP address: "192.168.1.50". This is an good example address, but other addresses in the range of "192.161.1.XXX" where X is 1 to 255 will work (except I would not use 192.168.1.1, 192.168.1.240, or 192.168.1.255).
C. Plug the WRE54G into the AC power. (check the lights on the WRE54G to make sure they are correct - the WRE54G startup documentation talks about this or I can give details later).
D. Boot up your computer (make sure the network setting still show "manual" IP address and a static IP address of "192.168.1.50".
E. Bring up your web browser and enter into the address field the WRE54G's IP address of "192.168.1.240".
F. In less than a minute, the web-based configuration page should appear. Proceed cautiously to enter the configuration values as I've noted above in Steps 1 - 6. After clicking on the "Save" button at the bottom of the WRE54G's web pages, the WRE54G will always do a "reboot". I suggest unplugging and replugging the WRE54G into the AC after each reboot (just to make sure a cold reboot actually happens).
NOTE: I would also suggest that you enter the "IP Address" of the Wireless Access Point (see Step 1 above) LAST after entering and saving all the other WRE54G configuration values. That way, you will still be able to log onto the WRE54G at the default IP Address of "192.168.1.240" and make sure all the values are saved correctly (in case you make a mistake and enter the wrong IP Address for the Wireless Access Point). Note that each time you reboot the WRE54G and log into it with your web browser, you will want to "Refresh" the web-page screen when you go to "192.168.1.240" so you can see the updated page contents. If you screw up the configuration, you can always use the "reset" button (you need to use a paper clip to push it) on the side of the WRE54G to reset the WRE54G back to its default values. Then you can start over from the beginning.
My experience has been that if you have correctly configured the WRE54G and it works on your wireless network, you will be able to unhook the "hard-wired" Ethernet cable (from between the WRE54G and your computer) and still be able to wirelessly access the WRE45G at its IP address of "192.168.1.240" using your web browser
If you want, you can change the WRE54G's Password (or Username and Password) to values only you know so no one will be able to get into your WRE54G and change your settings maliciously or inadvertantly. Let me know if the above helps you or just confuses you.
--- bfin1

Hi AngryDrake,
Thanks for providing that information.
Are you working from Parallels, Fusion or from some sort a VPN environment?
If you are using the printer in a virtual environment, then please try accessing the printer's EWS in a regular environment just to see if you have the same results.
Use Safari when accessing the printer's EWS, other browsers sometimes won't allow it to open.
Since the printer is setup on the network and you are able to print, you just can't access the printer's EWS, I would update the firmware on the printer which should allow you then to access the printer's EWS through a regular environment. HP LaserJet Pro M1212nf Multifunction Printer Drivers.
Select your operating system, click next, click the link for firmware.
If you are still having issue, then make sure the printer is connected directly to the Router or Airport and not a switch.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to Determine the "Total" Page Count on HP 2575 All-in-one printer?

Looking at how to determine the "Total" Page Count on HP 2575 All-in-one printer? I've seen directions for other HP printers but can't seem to find any for the HP 2575 All-in-one printer. I am trying to find approximately how many pages my printer has printed since I've owned it. Any help is much appreciated.

The manual says you should be able to use the Embedded Web Server to view statistics.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to reset new page counter

Does anybody knows how to reset page counter (next free page number suggested on page creation)?

If your web host doesn't provide you with meaningful stats, sign-up for Google Analytics. Google will give you more valuable stats about your site visitors than a hit counter will. And it's free.
http://www.google.com/analytics/
Simply paste the GA code they give you into your web pages.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to get Page Count of pdf in Document library in EventHandler

Hi,
How to get Page Count of pdf in Document library once uploaded has been done and i would like to update the page count value in document library column of the corresponding file.
I should achieve it in Event handler.
Which even should i use, either ItemAdded or "ItemUpdated "?
Thanks & Regards
Poomani Sankaran.

Hello,
If you are looking for file download or view count then event handler will not work. You need to enable the analytic report to your site. Once you enable it then you can see the report within a browser or you can also create custom webpart to show count
of specific file.
http://blogs.msdn.com/b/ecm/archive/2010/05/03/web-analytics-in-sharepoint-2010-insights-into-reports-and-metrics.aspx
http://sharepoint.stackexchange.com/questions/34611/count-of-files-under-a-folder-in-a-document-library
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Report.Services 2008 - get page-count or row-count in the c#-code

hello
is it possible to get from the ReportViewer-control / ServerReport the page-count or row-count after the
reportViewerCheck.ServerReport.Refresh();
statement ??
many thanks in advance for any clue & regards
Michael

Hi Michael,
Yes, you can get them. For row count, you can add a parameter to store the row count of your dataset in your report.
Here are the steps:
1.     Add 2 datasets in your report, one for report use and the other on is to row count use. For instance:
DataSet1: SELECT     HumanResources.vEmployee.* FROM         HumanResources.vEmployee
DataSet2: SELECT     COUNT(*) FROM         HumanResources.vEmployee
2.     Add a parameter, set the parameter’s default value set to Get Values from a query and select DataSet2.
Then, in your ASP.NET web application code you can use the following function to get the row count of the report:
private int GetReportRowCount(ReportViewer report)
            return Convert.ToInt32(report.ServerReport.GetParameters()[0].Values[0].ToString());
For page count, you can refer to the following code:
private int GetReportPageCount(ReportViewer report)
            return report.ServerReport.GetTotalPages();
You may not get the correct row count and page count in after executing Refresh () method, that’s because when you run this method, it will start another thread to refresh the report and the code below Refresh () method will not wait refreshing complete but run it. For instance, you may get the page count as o if you run the following code in the Button event:
// Click this Button to refresh the ReportViewer1
        protected void btnGetPageCount_Click(object sender, EventArgs e)
            // Refresh the ReportViewer1
            this.ReportViewer1.ServerReport.Refresh();
            // Get ReportViewer1's page count and display in the txtPageCount TextBox
            this.txtPageCount.Text = this.ReportViewer1.ServerReport.GetTotalPages().ToString();
You can run the refresh in separate events and get page count in another event, such as below code:
        // Click this Button to refresh the ReportViewer1
        protected void btnGetPageCount_Click(object sender, EventArgs e)
            // Refresh the ReportViewer1
            this.ReportViewer1.ServerReport.Refresh();
        // Display the txtPageCount's text to ReportViewer's page count
        protected void btnGetPageCount2_Click(object sender, EventArgs e)
            // Get ReportViewer1's page count and display in the txtPageCount TextBox
            this.txtPageCount.Text = this.ReportViewer1.ServerReport.GetTotalPages().ToString();
Hope this helps! I would suggest you post a new thread in Visual Studio Report Controls forum if you need more help about using ReportViewer in ASP.NET web application.
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

? best book for understanding & modifying "Web Part Page" constructs and syntax i.e. WebPartPages:XsltListViewWebPart

Hello can anyone recommend an in depth "hands on" book or paper for understanding & modifying "Web Part Page" constructs and syntax elements i.e. <WebPartPages:XsltListViewWebPart
<WebPartPages:XsltListViewWebPart runat="server" AllowHide="True" PartImageSmall="" PartOrder="4" Title="Time" ManualRefresh="False" ViewGuid="{7C672E08-B5D5-435D-A8FE-AB84E97099B1}"
So far i've bought every Sharepoint Developer 2007/2010 book available, but none seem to really cover the layout and structure of the XSL methods in enough detail!
Thanks for any recommendations, links or white paper references ect!

Hi,
XsltListViewWebPart is a class that handles view rendering for default lists, such as document libraries and announcements, and it is inherited from Microsoft.SharePoint.WebPartPages namespace.
Please check the link below for understanding the elements used in the XsltListViewWebPart class:
http://msdn.microsoft.com/en-US/library/microsoft.sharepoint.webpartpages.xsltlistviewwebpart_members
More references about XsltListViewWebPart in SharePoint:
http://msdn.microsoft.com/en-us/library/office/ff604021(v=office.14).aspx
http://msdn.microsoft.com/library/microsoft.sharepoint.webpartpages.xsltlistviewwebpart
Best regards.
Thanks
Victoria Xia
TechNet Community Support

HP Web Jetadmin, PC-CONNECTED printer and Toner level problem

HP Web Jetadmin 10.3.93994 (10.3 SR7) running on Windows Server 2012 (Microsoft Windows NT 6.2.9200.0),
HP LaserJet M1536dnf MFP is connected via USB to the computer with Windows 7 SR1 64.
The latest drivers installed, SNMP, HP SNMP Proxy_64_10_3_0010 and HPWSProxyService_10_3_1 installed.
HP ToolboxFX shows the toner level, the approximate number of pages remaining, cartridge serial number, etc.
HP SNMP Proxy is not working.
HP WS Proxy runs, HP Web Jetadmin displays all but the state of supplies - writes "not available".
File HPWSProxyServiceLog.log errors and warnings does not contain, at the level "All" has many lines of "Calling UIO for ..." with the result of "Status code is 200".
When printer as networked - this is no problem - Jetadmin shows everything including toner's level.
Does HPWSProxyService_10_3_1 support status of supplies (toner level) for printer HP LaserJet M1536dnf MFP?

Bump.
Does no one else use this printer and Web JetAdmin?

Moving the Page Count Icon?

Is there a way of moving the page count either to the left or right? Furthermore, I would like to add a page count like the one in google so that users can click on page 4 or 11 for example rather than having to click 4 times to get to page 4. Hope this
makes sense.
dfrancis

Hi dfrancis,
Where do you want to put the page count ?
I assume that you want to put the page count on a page with a data view web part or a content query web part .These web parts will not show the current page by default .You can edit the page in designer to add the page count .
More information, please refer to the post:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec69f84c-c7de-4322-8395-dcbeb8b89958/customize-paging-for-an-xslt-listview-web-part?forum=sharepointgeneralprevious
in addition, there is a blog that provides a similar solution by Waldek Mastykarz (Sharepoint MVP), please take a look at:
http://blog.mastykarz.nl/sharepoint-2010-content-query-web-part-paging/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Web Jetadmin 10.1 Fax activity question.

I'm trying to get some stats on our faxing activitiy for 32 printers. I tried running a report but -- no data. So I ran a Data Collection on Device Utilizaton...but it's only reporting back what's happend SINCE I did the collection.
I know that the Fax Activity Logs are still available, and I can get them by walking up to the machine and manually printing them out. What I was wondering is if there is a way to get to this information through Web Jetadmin.
Thanks.

I am not certain where this should be posted to get the best answer.
The Web Jetadmin support page only lists contact support or submit a ticket as support options. You can try one of these two options.
Alternatively, you could try the Business Support Forums. I was not able to find a support forum specifically for Web Jetadmin, but you could try the LaserJet forums as I am certain most businesses are using it with LaserJet printers.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Knowing Viewer Page Count in Windows Forms

How do I determine the total Page Count of the Document in the Viewer?
Due to performance problems, I am breaking my report into 'Groups'. My Selection Formula is selecting the records for the group. I have created my own toolbar to move from page to page, but I don't know how many pages are in a group. Therefore, somehow I need to get the info from the viewer.
Say my group has 10 pages. I capture the CRViewer.Navigate event and see as I page through the NewPageNumber cycles through until is goes to 11, which is beyond my page count. The ShowNextPage event acts as if nothing is wrong, and shows me page 10 again!
I've looked through all the help files and only find a way to do this via the Web Viewer, which doesn't do me much good!
Suggestions please!

Hello Steven,
what happens if you use the ShowLastPage() method ?
[Visual Basic]
myCrystalReportViewer.ShowLastPage()
[C#]
crystalReportViewer.ShowLastPage() ;
If it will not display the page 11 then I would doublecheck how many pages this report displays in the CR Designer.
Falk

I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded

Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
Customer

Hi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Web JetAdmin page counter/paper usage

Similar Messages

Maybe you are looking for