Web Object not visible in published project

I'd like to use the new web object interaction widget in Captivate 7 to embed a website into a project. Everything works fine as long as I only preview the project in my web browser. But when I publish it and go to the slide where the web object is supposed to be, there's only a blank space. Why?
I've published the project in SWF-Format with eLearning-output set to "AdobeConnect". I tried to switch the option "Scalable HTML content" on and off as I heared that some people are having problems using this in connection with widgets, but no matter whether it's turned on or of, the web object doesn't show up. There must be something very
trivial that I have overlooked since I'm using the web object in the standard way it is meant to be used.
Thanks in advance for any help.
Andreas

Thanks for your advice, but it still doesn't work. I have created a new project for my tests with only the web object in it to make sure no other objects etc. are influencing the output. I published the project and tried to run it on different browsers/operating systems and directly from my hard drive vs. Adobe Connect. The results:
Using my Mac and opening the project with the HTM.-file from my hard drive after I have added the published files folder to the trusted locations for Flash (without this setting, it doesn't work), the web object only appears in Safari, but not in Chrome and Firefox. Using AdobeConnect, it's the same: only Safari.
Using a Windows laptop (again opening the project with the HTM.-file from my hard drive after I have added the published files folder to the trusted locations for Flash), it works with Internet Explorer and Firefox, but not with Chrome. Using AdobeConnect, no browser works. I only get this message:
I can't use the web object when it only loads under very special circumstances. Moreover, I found out, that checking the "Scale HTML content" checkbox in the publish window results in a totally misplaced web widget in those browsers that support the web object. It then looks like this:
I use this option regularly, so this is really a problem for me.
I hope you can tell, what I can do to get the web object running. I simply can't believe that this is the standard behaviour and that everybody else is experiencing the same problems. There must be something I can do to get it running.
I hope you can help.
Best Regards
Andreas

Similar Messages

New folder is not visible inside my project but shows in Windows Explorer.

I created a new folder under another folder. The new folder is not visible inside my project but shows in Windows Explorer. Also, if I try to add another folder of that same name, it denies the action since the folder (although invisible) already exists. My co-worker can access the same file (on a share drive) and see the new folder just fine. This error occurs whether I was the one creating the new folder or she is the one creating the new folder. I am new to RoboHelp and she has used it for years. I suspect something is not yet set up right on my side. Ideas? (I thought I posted this yesterday but I can't find it anywhere)

Hi there
What version of RoboHelp are you using?
Did you create the folder from inside RoboHelp or did you create it using Windows Explorer?
Cheers... Rick

Why Does Adobe Captivate 8 Web Object Not Get Published Correctly

Hi
I am trying to insert a YouTube video in Adobe Captivate and publish it. While it previews fine, when i publish it as an SWF, i see just a blank frame.
Can you help out here? Also, if I want to publish it as an PDF, will the video play there too?
Warm Regards
Akshay

Hi Akshay,
I am assuming the method you are using now is embedding Youtube videos into your Web object. My suggestion is it will be much easier if you use the Youtube Learning Interaction instead of a Web object to insert Youtube videos to your Captivate project.
This can be found in the Interactions Toolbar -> Learning Interactions -> Youtube
Also, as Sreekanth mentioned, please test it on a web server, or SCORM cloud.
Youtube interaction will work when exported to PDF as well.
Regards,
Mohana

Web object not resizing with presentation

I've added a web object in my elearning and published as a flash presentation. When I resize the browser window, the flash presentation resizes, but the web object does not resize. My users will have various screen sizes, so I need the web object to display proportionally to the project size.
I'm using a flash widget, so I cannot publish as HTML5.
Thank you for any help or assistance.

Hi there, unfortunately I don't have the answer but I'd like to support your question as I'm having exactly the same issue.
Cheers,
Dan

NIDaq Windows application not visible in new project

Hi Everyone,
I am trying to build a VB.NET WPF application using Measurement Studio 2013 for Visual Studio 2012.
I followed the walktrough Creating a measurement studio NIDAQmx application, but I get stuck at the point of creating the project as Visual studio does not offer me the possibility to create an NIDaq Windows application.
I have DAQmx9.8 installed for LabVIEW, I downloaded NI device Drivers 2014 feb, but still the same.
When I installed Measurement Studio, it could not find the Device Drivers, and even after downloading them and trying to install them afterwards trought the installer of measurement studio, it cannot find them.
Daqmx support for .NET 4.5 seems to be installed too, although it is not visible in the list of installed softare.
Thanks for your help,
Best Regards,
Attachments:
WPF_Daqmx.PNG ‏51 KB
installedSoftware.PNG ‏21 KB

Hi Matt,
Thanks for your answer, I did a custom install and I installed .NET framework support 4 & 4.5, but I did not install Microsoft Visual Basic 6.0 support, is this mandatory?
Although it is working now on some of my configurations at least.
I have 3 machines on which I have made the attempt, with the following configurations:
A: x86 desktop:
-Windows 7
-LabVIEW installed, NI-Device drivers Feb 2014 and NI-DAQmx 9.8.0 (previously installed, for labview)
-Visual Studio 2010, 2012, 2013
-Measurement Studio 2013 for Visual Studio 2010, 2012
=> NI DAQ project and NI DAQ assistant available in both visual studio 2010 & 2012
B: x86 desktop:
-Windows 7
-NI-Device drivers Feb 2014
-Visual Studio 2010
-Measurement Studio 2013 for Visual Studio 2010
=> NI DAQ project and NI DAQ assistant available in visual studio 2010
C: x64 laptop:
-Windows 7
-LabVIEW installed and NI-DAQmx 9.8.0 ( NI Devices Drivers feb 2014, but Ni-Daqmx 9.8.0 was installed before as I am usually working with labview)
-Visual Studio 2010, 2012, 2013
-Measurement Studio 2013 for Visual Studio 2010, 2012
=> NI DAQ project and NI DAQ assistant available only within visual studio 2010 not 2012....
I would like the laptop to work under 2012 too, as it is the machine I use most of the time.
Does the order of installation impact on visual studio integration?
Should I reinstall everything on the laptop from the begining? In which order?
It seems that NI-DAQmx 9.8.0 even with .NET support 4&4.5 is not enough, and it is mandatory to install NI Device Drivers Feb 2014, Is that correct? If yes, why?
Now the most important for me is the ability to check if the signal outputs are generated correctly on the simulated device, thus being able to see traces with NI IO trace, and none of these configurations, using both NI DAQ example or a project generated with the daq assistant, shows anything in NI IO trace.
I have posted related threads on ni.forums.
http://forums.ni.com/t5/Measurement-Studio-for-NET/Web-publishing-daq-application/m-p/2830642
http://forums.ni.com/t5/Measurement-Studio-for-NET/WriteDigitalChannel-example-nothing-in-NI-IO-trac...
Thanks for your help,
Best Regards,

Captivate 7 Web Object Not Scrolling on iPad

I've inserted a web object in to my project and filled it with text so that it requires scrolling. The project has been published as HTML5 with no scalable HTML content.
Scrolling works fine on PC but not on iPad (iOS 7). I'm guessing that this is down to the usual iFrame issues on iOS devices so I'm looking for a reliable way to get around this issue.
I'd be grateful if anyone has any suggestions.
As an aside, the main reason I'm looking to implement a web object is that I need to be able to style individual words within large amounts of text. Unfortunately this doesn't seem possible using the scrollable text interaction so I've had to resort to searching for an alternative solution, in this case pulling in an external HTML file with styled text in it. The full discussion is here for anyone who's interested: http://forums.adobe.com/message/5775245#5775245
Thanks.

Does your Web Interaction show "Updated" on it? If not, you probably have older version of it. Apparently, the issue is already fixed in the updated version. Here is a screenshot.
You get this updated version automatically. If not, you can contact any Adobe support staff and they will provide you one.
Sreekanth

New objects not visible in report objectpicker

Hi, I'm new to SCOM so please forgive me if I say something wrong.
We are using SCOM 2007 R2.
In Operations Console I've created 2 new Web Applications in Authoring view.
In Reporting view I open Availability report from Microsoft Generic Report Library
Click Add Object
Search for Web Application I've created and get nothing
For some reason I see only old objects when search or view all available in report. I tried to use old Management Package and created my own (I thought the problem was in sealed MP, but my new is unsealed). Found similar problem in "Missing Objects
in Report Objectpicke" question, but we have less than 100 monitoring agents.
So I have no idea why objects are not visible, could you please help?

Verify from Group {contain all computers that you want} that using in Reporting.
You also check below link, it's similar issue
http://social.technet.microsoft.com/Forums/systemcenter/en-US/5cb0fb12-73c5-4553-987f-ea415babd876/missing-objects-in-report-objectpicker?forum=operationsmanagerreporting
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Captivate 7 web object not scrolling properly iPad multiscreen.html

I have a Captivate 7 project published as both SWF and HTML5. The project is to be deployed via an LMS using multiscreen.html.
The issue that I have is that I have a web object that requires scrolling but when I view multiscreen.html on my iPad I am required to scroll horizontally with my finger to achieve vertical scrolling of my web object, any attempt to scroll vertically just causes the web bouce effect in Safari. If I view the project via index.html on my iPad, scrolling works as expected with vertical scrolling behaving properly and no web bounce.
It seems as though multiscreen.html is getting the orientation of the device confused but that's just a guess. Has anyone else encountered this and if so, do they have a workaround that they can share please?
Many thanks.

I've found that updating the file called 'Widget_40080.htm' with the highlighted section in the following image fixes the scrolling issue on iPad.

Graph which should display the data of a view object not visible

Hi,
I have a main page which contains a <af:panelAccordion> component with three <af:showDetailItem> components. Each of these <af:showDetailItem> components contain a page fragment. In each of these page fragments are a <af:table>, <dvt:pieGraph>, <dvt:lineGraph> and a <dvt:areaGraph> which represent data of view objects.
In the first <af:showDetailItem> window all components are visible. But when I click on another <af:showDetailItem> all components are visible except the <dvt:areaGraph>. Weird is when I insert a <af:commandLink> into the page fragment without any functions. Also the link doesn't invoke any mehtod and partial submit is set to false. Now when I click on this link the <dvt:areaGraph> with its data become visible and show the data.
The area graph and the line graph have partial triggers set to the table. Because when another row in the table is selected, the area and line graph should show data which is dependent on the selected row of the table.
Has anybody an idea?
Thanks in advance!
Edited by: user13061309 on 27.07.2010 06:53

Hi Frank,
thanks for your response.
I created a fragment-based flow and dragged it onto the main page as a region component. The main page contains the panelAccordian with its showDetailItem's. Each of the showDetailItem components of the panelAccordian contain such a region component.
Now I set the partial trigger's property of the region component pointing to the showDetailItem component which contains the region but nothing changed. The graph is still not visible at the first click on the detailItem. I also set the trigger's property of the region component pointing to the panelAccordian but also nothing happens.
Regards
Michael
Edited by: user13061309 on 06.08.2010 03:00

Indesign transparency multiply pdf/x-1a pdf/x-4 export pdf object not visible

Hello,
I've created a simple Indesign cs4 document under osx demonstrating the problem. I've copied from an Indesign document a rectangle with a fill color 100% cyan and a transparency effect multiply and paste the object within a new created document. I've paste the same rectangle again and switched off the transparency effect. Then I've create a new rectangle again with the same fill color and multiply transparency effect.
When I create a pdf with the standard pdf/x-4 settings the copied rectangle with the multiply transparency effect has disappeared, while the other 2 rectangles are visible. Creating a pdf with the standard pdf/x-1 settings in Indesign, then all 3 rectangles are visible.
I've created a zip file named Indesign.zip with the following 3 elements:
- multiply.indd - indesign document
- pdfx1.pdf - export pdf with pdf/x1 settings (3 rectangles are visible)
- pdfx4.pdf - export pdf with pdf/x4 settings (only 2 rectangles are visible)
Opening the document with CS5 and creating pdf files, we obtain the same strange result.
You can download the zip file from the following link:
http://www.symeta.be/symeta/static/files/Indesign.zip
How do we explain this peculiar problem?
Regards,

Peter, John,
If there is no solution finding corrupt objects before going to production (creating pdf files), then the problem is only detected when the job is printed! More important, if the corrupt object is located in an advertisement, then you customer wouldn't pay.
To further investigate the problem I've create 2 snippets with the following names:
- Snippet_Good_PDFx4_Result.idms (snippet of the object who's visible after conversion to pdf/x-4)
- Snippet_Wrong_PDFx4_Result.idms (snippet of the object who's not visible after conversion to pdf/x-4)
You can download these snippets from the following link.
http://www.symeta.be/symeta/static/files/Snippets.zip
When I replace the following 4 lines from the bad snippet:
                            <PathPointType Anchor="0.21122640285165062 35298.673065771356" LeftDirection="0.21122640285165062 35298.673065771356" RightDirection="0.21122640285165062 35298.673065771356"/>
                            <PathPointType Anchor="0.21122640285165062 35440.40534923592" LeftDirection="0.21122640285165062 35440.40534923592" RightDirection="0.21122640285165062 35440.40534923592"/>
                            <PathPointType Anchor="141.94350986741858 35440.40534923592" LeftDirection="141.94350986741858 35440.40534923592" RightDirection="141.94350986741858 35440.40534923592"/>
                            <PathPointType Anchor="141.94350986741858 35298.673065771356" LeftDirection="141.94350986741858 35298.673065771356" RightDirection="141.94350986741858 35298.673065771356"/>
With the following 4 lines from the good snippet:
                            <PathPointType Anchor="154.96062992125985 161.1023622054882" LeftDirection="154.96062992125985 161.1023622054882" RightDirection="154.96062992125985 161.1023622054882"/>
                            <PathPointType Anchor="154.96062992125985 302.8346456700551" LeftDirection="154.96062992125985 302.8346456700551" RightDirection="154.96062992125985 302.8346456700551"/>
                            <PathPointType Anchor="296.6929133858268 302.8346456700551" LeftDirection="296.6929133858268 302.8346456700551" RightDirection="296.6929133858268 302.8346456700551"/>
                            <PathPointType Anchor="296.6929133858268 161.1023622054882" LeftDirection="296.6929133858268 161.1023622054882" RightDirection="296.6929133858268 161.1023622054882"/>
Then the result is ok!
The bad one has very strange coordinate values, such as 35298.673065771356 which is about 12452 mm! When placing the bad snippet in a new Indesign document the result is ok, just after converting to pdfx/4 the object isn't visible anymore!
Who can justify this strange behaviour?
Regards?

Custom attributes added to user objects not visible in OWA address book

Hi,
I am using Exchange 2013 and recently added a new custom attribute in the user object properties using the details template editor to be visible in the GAL The new attribute is correctly getting displayed in the GAL from outlook clients but not visible
in OWA address book. Is there a way to update the display of user objects in OWA address book to include the new custom attribute?
Thanks!

Hi Abu,
Please see following link:
Customize Details Templates
http://technet.microsoft.com/en-us/library/ms.exch.toolbox.detailstemplate(v=exchg.150).aspx
It says, Use the Details Templates Editor to customize the client-side graphical user interface (GUI) presentation of object properties that are accessed by using address lists in Microsoft Outlook.
My understanding is this setting only visible in Outlook.
Please correct me if there is any misunderstanding.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Ole object not visible on oracle report

Hi,
I have an oracle report built in oracle report 6i builder I have used a Boilerplate OLE Object(image.bmp) in the report but when I am executing the report on Oracle E Business(Application) then that OLE object is not visible on the report output(output is in the pdf format).
Please help me out with this
Thanks in advance

If you want to display an image on your report, use Link File as item type in the Layout Editor.
Note that the image has to be accessable from the Reports Server.

Web service not visible in production

Hi all,
I have developed a web service in development server and it is working properly. When transported to production, it is not visible in service definitions. ( se80 -- enterprise services -- service definitions)
But in production, under repository information system, it is available.
My requirement is how to get this webservice from repository information system in to enterprise services-- service definitions?
Please help me
Thanks & regards,
Murali Krishna .T

Hi Murali,
I hope you looking in Repository browser of SE80 and have chosen the correct package. Jut try to filter based on package and select the correct package used for development of the service.
Regards,
Avishek.

RoboHelp HTML Version 10 - Navigation panel not displaying in published project

We are generating a WebHelp project in RoboHelp HTML Version 10 and the navigation panel (TOC, Search, etc.) is no longer visible in the index file (viewed locally) and it's only visible by clicking "Show" when viewed in a web server. This issue is occurring with Internet Explorer 11 and Google Chrome Version 39.0.2171.99 m. I also tried to view the index files of previously generated projects and am experiencing the same issue (this did not occur before). Is this a known issue? It appears that there a few other discussions posted recently experiencing similar issues. Any help would be greatly appreciated.
Thanks,
Nikki

Hi there
Sorry, but I'm a bit confused. What you are describing sounds like perfectly normal behavior.
Can you share a link where this is happening? Not so we can click it, but so we can see what the link looks like.
If you want a topic to open with the surrounding navigation (TOC, Index, Search, Glossary) you need to click the Show link, then look at what's in the Address bar. Copy that link and you should have what you need.
Cheers... Rick

Objects not visible in Map Viewer Display Data with Mouse Moveover

Hi All,
On version 11.1.1.5.2 OBIEE with Map Viewer a customer has the following problem. Data objects are not displayed as expected on the map when the visibility check box is disabled on a dashboard. However the data about the object is incorrectly displayed on the map when the mouse is placed over the location of the hidden object.
The customer's screen shots show a map with a panel which has a list of assets with a check box controlling if the asset is displayed. When the check box is off then the asset image is correctly not displayed but when the mouse is placed over the hidden asset’s location then incorrectly a pop window shows the hidden asset's Tooltip data.
I was unable to reproduce this in-house with an OBIEE dashboard connected to Google Maps.
In the MapViewer User Guide there is a reference to a MapViewer JavaBean method “setSVGShowInfo” which appears to be related to this:
http://docs.oracle.com/cd/E14571_01/web.1111/e10145/vis_beanapi.htm#i1023460
What approach should be taken to troubleshoot the problem?
Aidan
Edited by: user817045 on 21-Feb-2013 02:08
Edited by: user817045 on 21-Feb-2013 02:32

This is likely a bug.
Is there an SR filed on this?
Anyway, the Mapviewer javascript API is being used in OBIEE (not the java bean one).
Is it a standard obiee map view which has this issue?
Try the OBIEE Sample App (available on OTN)
Try Dashboard page 3.3. SF Metrics. There are two layers that can be shown on the map (Revenue and Billed Quantity, and Establishment Revenue).
Enable both and on hover the Rev & Billed qty info is shown. Uncheck Rev & Billed Qty and only the info for Establishment Revenue is shown on hover or when clicked on.

Web Object not visible in published project

Similar Messages

Maybe you are looking for