Web Page Compatability...Photos don't fully load

Greetings from The Great Smoky Mts.
We're grasping at straws now....not sure if this is the spot to solve our problem but any help will be appreciated.
OK, after 5 years on WebTV, we decided to go to a computer....
We chose iMac G5 so it wouldn't be outdated by the time we learned to use it.....
We had no hardrive with WebTV and therefore used a site which was created to help Webbies create web pages....they back up all the files every week....
In our file manager there, we store all the photos that link to the website we created.
Since getting our Mac, we have been unable to view fully loaded images which have more than 29kb's.....
The administrator at wtv-zone.com was patient but in the end suggested we had an ISP problem....we posted in the iMac Discussion and several people went to view our site and said the pages of photos loaded fully.
OK, we figured it wasn't an Apple problem.
So, we changed from NetZero to ArcZip as an ISP.....no difference.
We downloaded Foxfire...no success....
At this point, we are totally baffled/Help is needed....Please
We thought about downloading IE to see if that would help but before we make that decision, we need some input from someone who understands our problem....Could it be something with our computer in particular?
Could it be the way The Zone is presenting it's pages to the ISP?
Here's a link to our site: http://www wtv-zone.com/wendrick/signs.html
We also have problems with all the other sites hosted at wtv-zone but no problems anywhere else.....With our dial-up connection, sometimes images with high kb's take a little while to load but only at The Zone do they fail to load fully.
Anyone know anything about what our problem is and more importantly....a solution?
Should we download IE?....We still have our WebTV and it's on the same phone line as our Mac and it still fully loads the photos....
Oh, here's another interesting tidbit...when we go to our file manager and view a photo, it comes up immediately (like it's already loaded).... we can refresh the page and more of it will show but if it's 30kb's or above it never fully loads....
This is getting frustrating....
Any help will be appreciated.
Thanks in advance, Regards, Wendrick

We finally found the right? combination to work around our problem.....By using Firefox as a browser, we went to the photos that were over 29kb's and even though they refused to fully load...when we reloaded the page, they finished loading....still not perfect but at least we were able to drag them to our desktop and insert them in an album....We then switched back to Safari using the same ISP and couldn't get them to load...So, it appears to be a problem with our Safari....Obviously, this is the wrong Discussion to get help with that.

Similar Messages

Why does Firefox always block any link I try to open going to a web page when I don't have pop up blocker on?

Why does Firefox always block any link I try to open going to a web page when I don't have pop up blocker on? First off they are not even pop ups....your crap blocks everything and don't save user names &/or passwords when you have it checked. Also in your tutorials about solving this issue says it has the word "OPTION" .......no, it never says option to allow you to bypass it and etc. Only thing is says is "ALLOW" . That would be nice , but the problem is it will not allow it from then on. It only allows it right then and then you have to refresh...after that to open again it blocks it again.....HOW STUPID?!!!!!
It always say that this is preventing this page from automatically redirecting to another page. THIS IS WHAT I AM TRYING TO DO...GO TO ANOTHER PAGE........I DON'T NEED YOUr BROWSERS PERMISSION TO DO THAT. THAT IS WHAT A *%#$&*(&*%$$%% BROWSER IS FOR TO GO TO OTHER PAGES......THEY ARE NOT POP UPS!!!!!
YOU STUPID BROWSER ACTUALLY BLOCKS EVERYTHING AND THAT SUX!!!
HELP!!

Are you using "Clear history when Firefox closes"?
In case you are using "Clear history when Firefox closes":
*do not clear the Cookies
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you want to keep.
Let all cookies expire when you close Firefox.
*Firefox/Tools > Options > Privacy > Cookies: Keep until: I close Firefox
You can choose to keep third-party cookies from visited sites if necessary.
Create a cookie 'allow' exception for cookies that you want to keep.
*Firefox/Tools > Options > Privacy > Cookies: Exceptions

Creating an Aperture web page from photos the page goes white and nothing displays. Is this a RAM issue?

I have just purchased an iMac 27" 2.7GHZ running OSX 10.7.4 with 4GB RAM (16 GB has been ordered). I am using Aperture 3.3.2. When I attempt to create a web page from photos the page goes white and nothing displays. Is this a RAM issue?

I have resolved the issue....turns out that, in my case, running OSX 10.8.1 with Aperture 3.3.2 was what was required! I was running Aperture 3.3.2 with OSX 10.7.x and had this issue.
I hope this helps someone else as well.

When loading ANY web page, it take firefox 3sec to load a blank page. No matter what website I try to load, it just loads a blank page

When loading ANY web page, it take firefox 3sec to load a blank page. I have tried everything, starting firefox in safe mode and dissabling all add ons, turning 6v on and off, turnig proxy on and off, reinstalling firefox, restarting my computer, and reinstalling drivers. I can use another browser to surf the internet but finding one that is as capable to firefox isn't easy.
ps. Firefox did start at one point and then just stoped.
I use Linux Ubuntu 11.04 single boot

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also:
*http://kb.mozillazine.org/Error_loading_websites

Web Page created using the Site Studio loads slow.

Web Page created using the Site Studio loads slow, where we hard coded the program to fetch the data from the database.
Please tell me any other way to write the program so that it takes less time to load the site.

Hello Marcus,
I didt the same what you have explained. I followed the following Steps.
1. Created the Web Page and published(It is in Umlock State).
2. Created the Site Navigation and gave the target for that page.
3. In the Portal Content, I created a role , then folder and for the folder property, i gave the External Connector wpcnavigation:///wpccontent/Sites/News/Site Navigation/navigation.wpc ( Say for ex News is a Site) and Entry Point as Yes.
4. After this i assigned that role to a user(Super Admin).
After doing the above steps, I couldnt able to see the Web Page displayed.
Thanks
Gopi

Web pages with Flash don't appear to load completely

My web pages use a flash menu. They load and work but IE acts
like they are still loading. Any suggestions? It is appears to be a
flash problem. Here is a
sample

are you referring to the 'click to activate' message? If so,
you may want to embed your pages using SWFObject.
http://blog.deconcept.com/swfobject/

Google Analytics account pages don't fully load.

FF 14+ won't fully load Google analytics account home. This just started today. Chrome and Opera display my Google account fine. No, new plugins or software or any other changes has been made to FF. Ran avast!, iObit and have no problems with any other software on this machine. Cache has been cleared, cookies trashed... nothing fixes this problem.

By the way, were you thinking of completely removing Firefox and then reinstalling it, or ???
To make a fairly clean break, you could try the new Reset feature. This duplicates certain key data from your active settings folder into a new one, bypassing some add-ons and custom settings. Your plugins will still be active, but could be disabled manually if you like.
More information in this article: [[Reset Firefox – easily fix most problems]].
If the new settings folder has the same problem, you can switch back if you like using Firefox's Profile Manager. (This article describes how to start Firefox in the profile manager. I do not recommend removing anything until you are 110% certain that you will never need any of that profile's data in the future. [[Use the Profile Manager to create and remove Firefox profiles]])
Less rebuilding work if it works.

Web page compatibility between Mac and Windows

Hi, I was wondering if anyone has had any compatibility issues with opening a Java based webpage on a Mac. The web page works in Internet Explorer and Firefox on my VMware Fusion, but I cannot seem to get it to work on my mac directly. The page is a user interface for an Alcatel-Lucent networking device, so unfortunately I don't have many details. The user guide specifies for Windows to disable "next-generation Java Plug-in" in the Java control panel, but I wasn't sure how to do this on a mac. I tried using the IE Tab plug-in on Firefox on the Mac to see if that might help, but I just received a message that I was missing plug-ins, but Firefox wouldn't specify which plug-in?? If anyone has seen issues with some pages not working on the Mac, but working on Windows please let me know.
Thanks,
Eric

IETab does not work on Firefox on the Mac because there is no IE natively on your Mac, and that extension was designed solely for use in Windows.
The reference to the 'Next-Generation Java Plugin' is also a Windows only issue. If you wish to review your Java Preferences, do a Spotlight search for Java Preferences and you should see it in the Applications results.
Lucent has long been associated with Windows only hardware since the advent of the 'WinModem'. Hopefully you aren't stuck with a Windows specific device.

Since updating to 3.6.22 web pages are very very slow to load and downloads too how can I go back to my healthy computer please?

Last week I updated to Firefox 3.6.22 (?)and since then a whole host of problems have occurred:
web pages are taking forever to load
downloads (like ccleaner and registry booster) wont work
some programs I've used often aren't working correctly (MS Picture manager)
I would like to uninstall 3.6.22 and get back to having a healthy computer again.
Today the web page problem became extreme - pages simply not loading at al and so I have just reloaded 3.6.22 in case something was wrong the first time.
Suggestions please!
I'm not that tech savvy and don't know if the installed plugins you've listed below are correct.....
sue

Firefox 4.0 was released in March, over 3 months ago. If you have some add-ons that haven't been updated yet for Firefox 4.0, much less for Firefox 5.0, it is time for you to find similar replacements for those add-ons. IMHO, extensions like that should be considered as "abandoned" by their developer.

With firefox the web pages in all sites have started loading to the right on the computer screen, and therefore I cannot tab down ?

Hello,
my web pages in firefox are loading to the right of centre, and therefore I cannot scroll down.
This started in the past couple of days and occurs with all websites.
Thank-you.

go to help at the top of your browser then click on restart with add-ons disabled, firefox will close then it will open up with just basic firefox, then you can swicth the add-ons back on and it should be ok, ive just done this myself and it worked

Flash video on web page takes long very time to load before it starts playback

I just created a basic flash file to play a video on my web page and it's taking several minutes to load before it starts playback.
I'm using progressive downlaod and the file is in *.mov format and is 84MB in size. At first that seemed large to me for web play back, but I thought it could handle it since I thought the way progressive download works is that it would start playing the first frame right away and progressively play other frames as they download. However, this seems to be downloading the whole file first (or a major part of it) before starting any playback at all.
Is there some kind of setting I'm missing or is my understanding of the download incorrect and the file size is too large?
Some vitals:
- I'm using Flash Pro CS5
- To create my flash file, I used the standard import video wizard and selected the a file that is "on my computer" and "load external video with playback component" and then, I selected one of the standard skins.
- To deploy the vidoe on my webiste I have three files:
1) swf file containing the FLV component
2) the swf file related to skin
3) the actual video (84MB, mov file)
- Web page includes/embeds reference to swf file

Thanks for your response again. Looks like things have changed a bit to complicate this a little more.
adninjastrator wrote:
Are you saying that if I wait long enough it will start to play .... from the link you posted?
What you are implying here is correct. The file won't play no matter how long you wait. Looks like it's because of the "source" file settings in the Import Wizard may now be incorrrect. This is why it's not playing in the new file.
When I created my original Flash Video using a MOV file, during the import wizard, when asked "Where is your video file?" I selected the option "Already deployed to a web server...". Here I entered the url to where the video file is located on my production server.
When I created the new Flash Video using F4V file, during the import wizard, when asked "Where is your video file?" I selected the option "On your computer". Here I selected the file from my local drive.
Sorry for not pointing out the inconsistency earlier - I didn't think it mattered and plus I couldn't get the F4V file to import from the web server.
Anyway, I've changed my object tag using the acutal published html that flash generates and have uploaded all source files to same location.
http://www.upperhand.com/tv/video-intro.html
To sum up the problem(s) I need help with:
Issue #1 - When trying to import F4V file using import wizard, I cannot use "Already deployed to a web server..." as an option for the file location. I believe this is creating issue #2
Issue #2 - For some reason, the F4V file will not load into the SWF file when it's published to my production server.
It works when viewing locally through browser as c:\inetpub\wwwroot\mywebsite\video-intro.html
It doesn't work when viewing on development server through browser as http://localhost/mywebsite/video-intro.html
It doesn't work when viewing on production server through browser as http://www.mywebsite.com/video-intro.html
Issue #3 - When the above are resolved, I'm not certain if my orignal question/issue will be resolved... browser tries to downlaod full file before any playback.

When using installed 3.6.10 version, web pages take a long time to load. No add-ons or plug-ins are used. I have to use version 3.6 if I want to browse with Firefox, Or web pages take FOREVER to load.

OS: Windows 7 pro, updated daily as needed. This is a self built HIGH END computer, with a Quad processor, we'll leave it at that. I have a Cable connection: download speeds 1.5MBs. When I load Firefox 3.6.8 or 3.6.10 version, web pages take several minuets to load if at all. When I reinstall the basic Firefox 3.6 version over the 3.6.10 version, ALL web pages load instantly! I want the increased security of version 3.6.10 Firefox, but it will just NOT RUN on my computer!!

same problem here for the past two days till this morning when I created a new profile and removed ALL addons from the default profile. With the new profile with NO addons, I got to the sites with video that I had problem with and flash player did work.
Now, I only have three addons that have not created the problem; adblock, flashgot, and flashblock.
Create a new profile and check it out.

Certain existing and newly saved photos are not fully loading..

I'm not sure if this is a result of the update, or related to a recent application I may have downloaded that interfaces with the photo library and/or camera (face melter™ or camera bag™)..
it also may be a result of the 2.2 update..
Here are some screencaps showing the issue.
First one, this is a photo that I have hosted that I took with my DLSR, I saved it to my phone via the touch and hold saving process, early on in my phones existance as you can see from the 60 of 600something, and it appears nice and clear(aside from the slight compression from e-mailing myself a screencap)
http://randy.mainevwscene.com/images/screenshot1.jpg
now here is a screencap of me visiting the hosted photo on safari today.. it also appears nice and clear
http://randy.mainevwscene.com/images/screenshot2.jpg
I held my finger on the photo, and have now been prompted to save (still clear)
http://randy.mainevwscene.com/images/screenshot3.jpg
and now here is a screencap of the photo I just saved in my photo library. It is obviously blurry... now all photos will do this for a split second while they load, but its as if its not fully loading the file when I view it.
http://randy.mainevwscene.com/images/screenshot4.jpg
Has anybody else experienced this or is it just me?
Message was edited by: thelumpya2

after messing around for a while, I figured out the chriteria that causes the blurry photos... I have no idea why however..
it is without a doubt related to the photos resolution... any photo that is of the resolution 800x533 or vertically 533x800 is having this blurry effect..
I found a random photo on google image search with a resolution of 800x533 of a lambo.. I saved it to my phone, and here's a screencap of the photo saved to my phone.
http://randy.mainevwscene.com/images/screenshot5.jpg
I then saved that photo to my computer, opened up photoshop and changed the resolution from 800x533 to 798x532 (constraining porportions) and then hosted the photo on my website.. Then I visted the hosted photo's URL on my iphone with safari and saved this image (798x532).. Here is a screencap.. you can see the difference clearly..
http://randy.mainevwscene.com/images/screenshot6.jpg

Web page compatibility

I hope this is the right place for this.
I am the lone Mac user in a school district that operates only MS Windows machines. Until now, I've found ways to operate in the environment without any trouble. The Tech Coordinator has redone the school home page (http://schoolweb.missouri.edu/stoutland/) and now I cannot get it to load at all in Firefox and IE 5.2 for Mac. I can get it to load in Safari if I put the User Agent into IE for Windows, but none of the features work. The PCs in the school load the page without any difficulties. The tech person seems to think that it is a Mac problem (and therefore my problem). I seem to think that it has something to do with the fact that he used FrontPage to design the site.
Does anyone have an idea as to why this is happening? We would like to come up with a way to fix this without him having to start all over again.
Thanks in advance,
David Pershing
Stoutland R-2 Schools
Stoutland, MO 65567

Worked it out.
The page has a script on it which if you are not running Internet Explorer will redirect you to the default page of
http://schoolweb.missouri.edu which doesn't exist...
The script is currently this
<SCRIPT TYPE="text/javascript">
var nonie4 = "/default.htm";
var bAnimate = true;
The line
var nonie4 = "/default.htm";
is the problem.
The forward slash means send you back down one.
So if you are not using IE, going to
http://schoolweb.missouri.edu/stoutland/
Actually sends you to
http://schoolweb.missouri.edu/default.htm
It either needs to be
var nonie4 = "default.htm";
Therefore the school web page will only be available to users using Internet Explorer (probably only on windows).
The problem piece of HTML is the Frontpage menu the web person created which creates a piece of javascript which is causing the problem.
From an accessibility perspective this means that the menu will not be accessible to screen readers.
iFelix

Yahoo is my home page and now that I have downloaded your latest version, as stated in a note from you the tool bar is incompatible. So....how do I print or save a web page if I don't have my tool bar!! I'm not happy with this - please help.

You've moved stuff around so the tabs are at the top instead of my tool bar. I no longer have the means then to copy and paste, print, etc. when I pull up information I might want to keep from a web page. When I downloaded Version 4 a message came across from Firefox that the newer version is not compatible with the Yahoo toolbar. How then do I operate these functions? I'm not a techie, and was happy with my old Firefox. Not a happy camper now. Can you help???

iPHP
Wow! You know, I tried a variation of that, which was a complete guess, and of course it was absolutely wrong.
I had no idea you could stack DATE_FORMAT one after the other! I researched this for a LONG time and nothing came up like what you suggested, so thank you for this! I hope that this thread helps others who are or will soon be in my shoes. This forum is the BEST!!!
And of course, it works like a charm. Thank you.
Many incredibly sincere thanks,
wordman

Web Page Compatability...Photos don't fully load

Similar Messages

Maybe you are looking for