Web Page created using the Site Studio loads slow.

Web Page created using the Site Studio loads slow, where we hard coded the program to fetch the data from the database.
Please tell me any other way to write the program so that it takes less time to load the site.

Hello Marcus,
I didt the same what you have explained. I followed the following Steps.
1. Created the Web Page and published(It is in Umlock State).
2. Created the Site Navigation and gave the target for that page.
3. In the Portal Content, I created a role , then folder and for the folder property, i gave the External Connector wpcnavigation:///wpccontent/Sites/News/Site Navigation/navigation.wpc ( Say for ex News is a Site) and Entry Point as Yes.
4. After this i assigned that role to a user(Super Admin).
After doing the above steps, I couldnt able to see the Web Page displayed.
Thanks
Gopi

Similar Messages

How do I enlarge my web page to use the whole screen?

How do I enlarge my web page to use the whole computer screen?

Reduce dock size or hide same.
Also depends on what browser you're using all have full screen modes.
Safari :
http://support.apple.com/kb/PH11941
To enlarge an entire webpage so it uses the screen, click the arrows in the top-right corner of an app window:

How can I save the web page by using the Page Title as the file name ?

When i use Internet Explorer ,I can save the web page by using Page Title as the file name(as default no need to adjust anything). But when i use Firefox ,It can not use the Page Title to save as the file name. How can I do that like in Internet Explorer?

See:
*File Title: https://addons.mozilla.org/firefox/addon/834
*Title Save: https://addons.mozilla.org/firefox/addon/712

Removing links in web pages created using WPC

Hi there,
I am creating web pages using Web page composer. I would like to remove the links Send Feedback, E-mail, Print, Add to Favorites, RSS. How can i achieve this? We are running SP14.
Your comments are highly appreciated.
Regards,
Ponraj M

Dear
For Remove links of
"Add to Favorites"
"E-Mail"
"RSS "
"Send Feedback "
" Print "
Go to Page>right click on it>Edit page-->Page link Option
opne "Page link Option" and remove tick mark what u dont want to display on the page
than Save it and " Publish " it and "Finish"
than go to "Site navigaion" Right click on it and "Publish Site Navigation"
Reward Points if it is helpful

Removing links in a web page created using web page composer

Hi there,
I am creating web pages using Web page composer. I would like to remove the links Send Feedback, E-mail, Print, Add to Favorites, RSS. How can i achieve this?
Your comments are highly appreciated.
Regards,
Ponraj M

To configure the functions of the page header you will have to wait for SP14.
I guess to change the header for an SP13 you have to modify the pageheader.jsp. The page is part of the com.sap.nw.wpc.runtime.PageHeaderComponent.
Please note that this modification is not supported by SAP!

Can I design a web page to use the background image from the user's installed persona?

I build web applications, and I would like to have an application use the background image from whatever persona the visitor has installed, if any. Is this possible, using css/js/html?

No that is not possible with code on web pages (userContent.css could probably do this).<br />
The persona is only used as the background for the user interface (toolbar) area and not for websites.<br />
The dimensions of the persona with the height of 200px is also not enough to cover a page.

Why do links in the template change location to 'file:///'...on the pages created from the template?

Im not sure what I am doing wrong but I am building a portfolio site from a template that I downloaded online.
The site is working and I am slowly converting it from the template content to the content that I want.
As I will be editing the site and adding more pages I decided to try and add the Header, footer and main navigation bar as a template with another gallery container and navigation as an option on the template.
I thought that it was working fine untill I noticed that the links on the pages created using the template are showing as follows,
instead of the links that were in the template that show as,
Is this something that will change when I upload the site with the template or have I done something wrong making the links?

Usually this happens when you don't use a proper Site Definition, or if you have files outside your defined site folder.
Have you defined your site properly?
http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/

Editing pages created using dreamweaver with microsoft's visual studio express

Here's a quick, somewhat vague, question for anyone who might have an answer. Is there a trick to editing pages created using dreamweaver with Microsoft Visual Studio Express? The reason I ask is I recently finished a web site for my first client who now wants to make edits herself using the program she uses, that being Microsoft. I thought it would be as easy as pulling the html files from the server (or the usb flash drive i gave her), making changes and then putting them back to the server, but apparently she is having some problems. I'm meeting with her soon. I have no experience with any other programs, other than Adobe, so I don't know how much good I'll be in helping her. Maybe it's an easy question, maybe not. Any info appreciated. Thanks!

David wrote -
Dreamweaver template commands are all wrapped in HTML comments, so they
shouldn't cause any problems. They should simply be treated as comments.
However, the concept of editable and locked regions will be ignored.
Hi David, I meant the templates with the dwt extension, not the html files that are created from them. The full version of VS will recognize the dwt extension as 'Dynamic Web Template' but as this is a microsoft extension it does not recognize the code for editing and shows a large number of errors, (before anyone comments the dwt file extension is used by a number of other programs, all referring to a different file type).
PZ

I can't print multiple pages from a website using the site's print button or 'file - print' and if I try to save as a PDF, it still only saves the first page and then cuts off.

I'm using Mac OS X 10.5.8 and Firefox version 3.6.8. When I'm on a website and try to print the info on the site, whether I use the site's own 'print' option, or I go to the Firefox toolbar and try to use 'File->Print', only 1 page prints out - it just cuts off mid-page. If I try to save as a PDF instead, the same thing happens in exactly the same spot - it saves as a 1-page PDF and cuts off in the middle of the page. I've already tried all of the suggestions here https://support.mozilla.com/en-US/kb/Printing+a+web+page?s=printing&as=s and the suggestions here http://kb.mozillazine.org/Problems_printing_web_pages and nothing has worked.
I appreciate any help!!

I have the same problem... not being able to print website 'Print' pages. I have read carefully the above link and have followed the reset directions in about:config, but I still cannot print in Firefox. Both Google Chrome and IE work perfectly every time. I have verified that the correct printer is selected and that the margins are in order (0.5 all around happen to be what mine are set for). I have resorted to use the Firefox Add On "View this Page in IE" whenever I need to print something. Works like a charm, but come on... it should work in Firefox too! I know there is some setting or something, but the Problems_printing_web_pages link had nothing there that worked for me.

Since upgrading to OS X 10.8.2 a few days ago, Safari will suddenly zoom in on web pages (happens on multiple sites) when I scroll or move the mouse -- any one know why and what to do about it? Thanks.

Since upgrading to OS X 10.8.2 a few days ago, Safari will suddenly zoom in on web pages (happens on multiple sites) when I scroll or move the mouse -- any one know why and what to do about it? Thanks!

It really isn't a well thought out 'gesture' when a normal scroll action can result in an unwanted zoom but disabling SmartZoom wasn't an option for me—one of those with eyes that tire easily when reading very small text on a 27" display.
For a while I used command-+ and command-'-' to read small text but that isn't supported in some apps and for Safari it often leaves the browser in an less than perfect state when moving to the next page. I also tried option scroll to zoom the whole display but that was not desirable, either.
I finally settled on leaving SmartZoom enabled and remembering to double tap with one finger whenever the undesired zoom happens. It happens so often that the double tap is almost a reflex action for me.

Creating an Aperture web page from photos the page goes white and nothing displays. Is this a RAM issue?

I have just purchased an iMac 27" 2.7GHZ running OSX 10.7.4 with 4GB RAM (16 GB has been ordered). I am using Aperture 3.3.2. When I attempt to create a web page from photos the page goes white and nothing displays. Is this a RAM issue?

I have resolved the issue....turns out that, in my case, running OSX 10.8.1 with Aperture 3.3.2 was what was required! I was running Aperture 3.3.2 with OSX 10.7.x and had this issue.
I hope this helps someone else as well.

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the pag

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Having issues with loading web pages after using migration assistant

Last week my old macbook pro died and i purchased a new 13" mbp. I brought it home the first day i bought it and just turned it on and started playing with it and the internet was blazing fast, no issues at all. I then brought it back to the apple store where they peformed a migration from my old hdd to my new macbook pro. I then took it back to my dorm and connected to the same exact internet and now i am having problems loading web pages. Sometimes the page will load on the first try (click) and other times it will hang there loading but never fully load the page, and if it does load somewhat certain things are missing from the page. So i have to click the link again, and again, and sometimes again for it to finally load correctly. I dont know what is wrong but i have a feeling it is files from my old system conflicting with new ones when it comes to loading web pages. Everything is up to date the OS and firefox and i am having the same issues in safari. Also my ipad and blackberry have no problem connecting to the wifi so that is not the issue. I really hope someone can help me out because this is really starting to drive me crazy.

If your still having problems, or anyone else......
For future info, your in the wrong forum, your need the MBP area, this is the MacPRO area, no big deal, I can barely keep up with the M & B & P, etc...
Sounds like when it migrated over your old settings it may have gotten corrupted? It has been known to work if you were to just make another "Location" and just re-enter the information again and sometimes that will help. You might take it back to the store and see if it does it on their connection also. The silly person should have tested it first before letting you go.
Hope you got it fixed...

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

Using a Site Studio 10R4 Dynamic List Element Definition

Hi All,
I've created and can use a Static List Element Definition > Region Definition > Region Template with no problems based off of the 10gR4 samples.
However, there is no example that I've found to utilise the Element Definition of a Dynamic List. I'm attempting to use the same sample code as provided for a Static List but having no luck displaying the results of the query...
Does anyone have some sample code used in a Region Template or Sub Template to show how we use a Dynamic List Element Definition please?
I noted from another thread in this forum that there are some iDoc calls to make which load the query defined in the Element Definition... I can't find any documentation regarding this either.
Thanks
Edited by: user615721 on May 4, 2009 10:08 AM
Edited by: user615721 on May 4, 2009 10:09 AM

Found my answer in another thread, here... Re: Using a Site Studio 10R4 Dynamic List Element Definition
'For 10gR4 Site Studio you can get examples and even a video talking about making dyanmic lists from here:
http://www.oracle.com/technology/products/content-management/ucm/SiteStudio10gR4Tutorials/index.html'
Edited by: user615721 on May 4, 2009 10:25 AM
Edited by: user615721 on May 4, 2009 10:25 AM

Web Page created using the Site Studio loads slow.

Similar Messages

Maybe you are looking for