Web Page transitions are not smooth

I just published my new website on web.mac.com/cherisykes and notice that the changes from page to page are not very smooth or prompt. Is there anything that can be done?

The main reason is your choice of the "Darkroom" theme. It uses an image to create the textured background and this increases the download time and is responsible for the "venetian blind" effect as the page loads in the browser.

Similar Messages

Web page transitions are rocky

I have just published my new iWeb website on to .mac (at web.mac.com/cherisykes). I am noticing that the page transitions, going from page to page, are not smooth. I have to wait, so white space, etc. Can I correct this? Eventually, when construction is complete, I am going to forward this website to my GoDaddy domain name.

The main reason is your choice of the "Darkroom" theme. It uses an image to create the textured background and this increases the download time and is responsible for the "venetian blind" effect as the page loads in the browser.

Flash files are not smooth

Hi,
I am running DMP 4400G (5.2.3) with DMM server 5.2.3.
Every thing working fine except the flash files. All the flash files are not smooth. They are playing like fram by fram. I am using flash 10.

We've run every type of flash on the 4400. We've tried flash 7, flash 10, flash lite, action script 2 and action script 3. For the most part, flash will *not run smoothly* if:
1. You have very large files, like imported bit map images.
2. Large sweeping motions or tween animation effects.
3. Multiple flash objects on a single page.
4. Video embedded in flash will never play evern remotely reasonably well.
The best thing to do is:
1. Keep flash objects small.
2. Animations should have as few frames as possible, no tween effects, no big sweeping motions, in other words, make transitions small and very quick.
3. Keep flash objects self contained, that is, don't try to pull in too much content from external sources.
Like I said, we've tried so many things, but when it comes to flash, the 4400 is rather restrictive.
Good luck!
-Michael

Web page transitions, adding music, aditional themes...

This is a question/suggestion. Because perhaps iWeb does have this capability and I don't know how to use it. OR, it does no have it and I am suggesting to Apple to build it.
1. Web page transitions: fancy transitions between the pages of a site add a special spice to the navigation of the site... are these available on iWeb08?
2. I know I can drag and drop an MP3 or music file to the page, however, my PC buddies that do not have Quicktime(R) installed on their computers (because they only have internet at work where they cannot install anything) cannot play music or even see the file. Is there a way to add music that automatically starts when a user opens the page? something that does not require then end user to have QT installed on their PC.
3. One of the things I love about iWeb is their templates/themes although I would like to know if apple has more themes available to download (hopefully for free since I already paid for the software) is there such a resource?
Thanks everyone for reading all three questions, I appreciate the fact that you are about to write an answer! Thanks!

iWeb does not provide every conceivable solution. You have to be creative too.
1. Web page transitions: fancy transitions between the pages of a site add a special spice to the navigation of the site... are these available on iWeb08?
No. You need some sort of JavaScript to accomplish that. Search the internet or see how others do it.
2. I know I can drag and drop an MP3 or music file to the page, however, my PC buddies that do not have Quicktime(R) installed on their computers (because they only have internet at work where they cannot install anything) cannot play music or even see the file. Is there a way to add music that automatically starts when a user opens the page? something that does not require then end user to have QT installed on their PC.
Use other code. [Search for free Flash MP3 players|http://www.google.com/search?q=free%20flash%20MP3%20players]. Then embed the code with the HTML Snippet.
http://www.wyodor.net/iFrame/
http://www.wyodor.net/MoreEmbed/
3. One of the things I love about iWeb is their templates/themes although I would like to know if apple has more themes available to download (hopefully for free since I already paid for the software) is there such a resource?
Apple has none. If they had they would advertise it. Create your own pages.
http://www.iwebtemplate.com/
http://guimkie.com/projects/iweb/
or copy/paste from these templates
http://www.freecsstemplates.org/
and if you have Pages, copy from there
http://www.wyodor.net/Vereniging/

Why does Firefox no longer display .php suffix web pages which are in my Mac?

I have a question about Firefox 14.0.1 displaying .php suffix web page files which are in a Mac running Mountain Lion OS 10.8. In eaarlier versions of Mac OS, for example 10.4.7, I was able to see properly displayed web page files with .html and .php suffixes when those web page files were in my computer. I refer to seeing the page as it should properly display, not seeing the source code. If a page had a .php suffix, the browser displayed the page properly although any php scripts embedded in that page were ignored.
Apple occasionallly updated its OS and browser makers occasionally updated browsers. One day, I noticed that Safari no longer displayed web page files in my Mac if those pages had a .php suffix. However, Firefox and other browsers continued to display web page files with .php suffixes although the embedded php scripts were ignored.
Now, I have Mountain Lion in iMac.
I can no longer see .php suffix web page files in my computer regarless of the browser I use. No browser displays those pages.
A .php suffix web page file which Firefox and other browsers display in 10.4.7 does not display in 10.8 if that web page file is in the computer.
In my computer, I have html and php suffix web page files I want to see using a browser. The files I want to see and the browser both are in my computer. Html files display perfectly with one exception: if php scripts are embedded in the html files, the scripts are ignored. A file the name of which ends with ".php" will not be displayed regardless of whether there is a php script in the file. Safari displays the source code only. Chrome does not display the file at all. Firefox and SeaMonkey, which displayed .php suffix web page files in earlier versions of the Mac OSm now respond to such pages by providing a dialog box which seems to assume that the file is about to be downloaded from the Internet. The dialog box asks me if I want to use the browser to open the file or if I want to save it to disk. The file is on the disk at the time, and the computer is disconnected from the Internet. I click that I want to use the browser to open the file. Then the dialong box reopens with the same question. This happens over and over. I never get to see a web page file in my computer the name of which ends with ".php". With Firefox 14.0.1, I can see .php suffix web pages which are on the Internet or in a 10.4.7 Mac but not in a 10.8 Mac. Did I miconfigure Firefox? It seems unlikely that Firefox lost the ability to display pages in Mac OS 10.8 which it displays in `10.4.7. How can I solve this web page display problem?

Haroon mentions two solutions. I used the easier one, which is to start the Apache webserver already in Mountain Lion and to enable the php already in Mountain Lion. It worked. I see the file correctly displayed with html, css, and php. I see the page by using Firefox. I enter an address in the address bar. For example, the address might be "localhost/example/example.php". I cannot see the page by using Firefox's "Open File ..." menu option or by dragging the file's icon onto Firefox's icon. I tried using your solution also but was unable to find the specific preference to modify. I found the page of preferences which may be modified but I could not find the one I need. I found a list of descriptions of the preferences at http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries
but I could not find the specific preference which I need.
By the way, to enable loading the php module, one uncomments a line of code by deleting the initial "#" character, and one does that by pressing control key and "P" key while the cursor is over the "#" character.
Also by the way, when I use Firefox or Safari to look at the Apache web directory in which my files are, the files are listed case sensitively. For example, the files are listed: Ace, Zygote, bar. This is because lower case follows upper case. THis annoys me. I prefer case insensitive listing. When I llok directly athe directory without using a browser, the files are listed case insensitively. For example, they are listed: Ace, bar, Zygote. I guess taht Apache is doing this.

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8 . I am using WaveMaker application for web development

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

I recently upgraded to iOS 7.0. When I open Safari to a blank page, a small "Settings" icon appears against the white background. When I click on it, it opens a link to a web page that is not among my other bookmarks. How can I get rid of it?

I recently upgraded to iOS 7.0. When I open Safari to a blank page, a small "Settings" icon appears against the white background. When I click on it, it opens a link to a web page that is not among my other bookmarks. How can I get rid of it?

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Transitions are not rendering. Help?

I have used iMovie many times, but for some reason my transitions are not rendering now. I place them in and they do not render. I am also having a hard time gettin transition in because after I do one then it shows up as an error and asks me to close the program.
Any ideas?

I had a similar thing recently.
For me the issue was that I'd put text on the clip it was transitioning too - as it can't render both the transition and the text it ignores the transition (it shows it's doing this by greying it out in the project browser).
To get round it just drag the text a couple of seconds into the clip - essentially remove the overlap.

Page nubers are not printing on Hardcopy

Hi,
I have one scrippt, i n that page numbers are displaying in print preview, but page numbers are not printing when i take printout, can any body tell the solution for this?
Thanks.

that usually happens when u do not have enuf space in the window( or wherever uve defined page nos) to display. re size ur window and u'll see it
as always
pk

While notes, reminders and calendar are working fine, keynote (beta) and pages (beta) are not responding, they are sticking. What should I do? I would appreciate help. Thank you.

while notes, reminders and calendar are working fine, keynote (beta) and pages (beta) are not responding, they are sticking. What should I do? I would appreciate help. Thank you.

Unfortunately, most of my advice is in the "hindsight is 20-20" category.
First off, I would never have purchased the peripheral accessories until the 14 day return period had expired. Second, you learned the hard way what the "14 days" really means.
Too bad you didn't do any homework, reading this and other forums and tech sites. Even word of mouth from others. That, more than anything could have steered you towards different phone choices from the get-go and I will leave that there with no further comment other than to say most of the issues you described have been discussed in this forum, ad nauseam.
Once you got into the refurbished phone exchanges, that is where things really went haywire. What someone tells you over the phone is a sketchy proposition, and when it comes down to it, it's your word against theirs.
I think Verizon tried to make it right, though. Remember, they don't make the phones. Don't throw the baby out with the bathwater.
You stated yourself you were a satisfied Verizon customer before this. Had the first two phones performed as they should, you would still be a satisfied Verizon customer.
Doubt any of that will make you any happier, but after you went through the effort of writing such a long post, I thought I'd try.

Whenever I open firefox a add ons screen comes up with the yahoo web page behind it. . I just want the Yahoo web page and do not want to close the add ons page every time I use my computer.

Whenever I open firefox a add ons screen comes up with the yahoo web page behind it. . I just want the Yahoo web page and do not want to close the add ons page every time I use my computer.
I don't know what else to say about this. It is a screen that comes up in its own window everytime I open Firefox

Please check your home page setting and see if about:addons is listed. If it is, please remove it
https://support.mozilla.com/en-US/kb/How+to+set+the+home+page

Alpha transitions are not in bold

i just downloaded Final Cut Studio 7 and my alpha transitions are not in bold [so they are unusable] Also, I can't import the color looks folder...any ideas?

Because they are not bold does not mean they are not useable. Bold transitions simply mean the transitions will playback in realtime.
You don't download alpha transitions from Apple. The alpha transition is part of Effects in FCP. The componenst you download are just video files used in the alpha transition.

Page thumbnails are not number correclty

I have 123 pages pdf files.
The original pages on the paper are mark page 2, 4 , 6 (evenly).
But my Page thumbnails are not number correclty they go from 30 -31, 1-5, whole mess. But I can view my pages in order (by 2, 4, and so on).
is there a way I number the pages by 2 , 4 , 6.
im using adobe acrobat x pro
thank you for your help.

you can renumber them if you like... pages panel > options > number pages

What's the fix for this CS4 message: One or more of the pages specified are not valid page names

I'm trying to export two pages (a spread) as a PDF. I've tried a number of times, using various techniques, including exporting first to a .imx file. Each time I get this message: One or more of the pages specified are not valid page names.
How can I get this to work?
I can't attach the file because it is 11MB.
Thanks,

Are you using sections in your document? That may mess up your pagenumbering while exporting pages as spreads. Try to put + to front of page numbers... like +12-+13 (into Export dialog´s page range field)
Another option is go to Preferences > General and change pagenumbering view method from Section Numbering to Absolute Numbering.

Why are on the first web page buttons are shaped and following pages don´t? All Pages are based on the same Masterpage.

Hello,
I´ve a Problem with Muse.
Why are on the first web page buttons are shaped and following pages don´t? All Pages are based on the same Masterpage.
Any ideas?
Stefan

I just republished the site, and it looks fine, energievollfit | über
could you please try to republish the site again, and let me know .

Web Page transitions are not smooth

Similar Messages

Maybe you are looking for