Web pages are printed incorrectly, i.e. left side of page in p.1, right side on page 2. This started recently. Correct printer is identified.

Firefox recently updated. Now, printing a web page results in left side printed on p.1, right side on page 2. Using the same Canon D9000 printer. Selecting horizontal format causes the left side of page to be printed 1/2 size on 1/4 page! Printing same web page with IE is OK. Printing from MS`Word is OK.

All web pages? Or just some? Example of a page where that happens?
Do those pages have '''Frames'''? <br />IOW, is the '''Print Frames''' section in the print dialog available (not greyed-out) for selecting '''''Each frame separately'''''?
If that isn't a Frames issue, my advice is to do the '''reset''' described here. <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer <br />Make sure you reset all the prefs for that particular printer.

Similar Messages

  • Since installing FF4 my pages are all scrambled..... black squiggley lines that sometimes fills the whole page or different parts. It is driving me crazy! PLEASE HELP! If I can't figure it out i will have to unistall and that will suck!

    Since installing FF4 my pages are all scrambled..... black squiggley lines that sometimes fills the whole page or different parts. It is driving me crazy! PLEASE HELP! If I can't figure it out i will have to unistall and that will suck!

    Since installing FF4 my pages are all scrambled..... black squiggley lines that sometimes fills the whole page or different parts. It is driving me crazy! PLEASE HELP! If I can't figure it out i will have to unistall and that will suck!

  • I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

    I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

  • Created site in iweb 08 and posted to netfirms... the pages are all loaded up but there is no nav bar, it comes up on each page as a small black dot. How do I get the nav bar to load up and show?

    I created site in iweb 08 and posted to netfirms... the pages are all loaded up but there is no nav bar, where the nav bar should be is only a small black dot on each page. How do I get the nav bar to load up and show? It was a disaster loading up my site as it changed the case of the letters and at first no pages were seen, so I had to go through and change the letters that were supposed to be cap, back to cap in every file. I don't know if this has something to do with it or not. The tech support doesn't have an answer. Please let me know if you have any ideas and solutions. Thanks bunches!

    Here are links to the simple 7 pages....
    http://www.rednosedesign.net/home.html
    http://www.rednosedesign.net/about_us.html
    http://www.rednosedesign.net/logos.html
    http://www.rednosedesign.net/flyers_&_ads.html
    http://www.rednosedesign.net/notecards.html
    http://www.rednosedesign.net/business_cards.html
    http://www.rednosedesign.net/contact_us.html

  • When I'm on an email FF stops me from linking to other pages/sites. Requires that I press Allow. This started recently. How do I disable this annoying feature?

    When I am reading an email that I received and want to follow a link in that email, FF prevents me from doing so. It shows a new pane informing me that FF has prevented me from following the link. If I click the "Allow" button in the upper left-hand corner, I am then linked through.
    This does not happen when I am on a particular website. In that case I have no trouble navigating the indicated links.
    FF Preferences does not give me a way to disable this annoying feature that slows me down.
    This problem started recently - possibly the last two weeks. It recurs whenever I use FF.
    How can I disable this annoying "feature"?

    You're welcome

  • Left side of keyboard won't work, right side isn't right

    Whole left side of MacBook Pro not working at all and right side shows symbols but not the correct ones. Trackpad works fine and top row of keys works all the way across - light, sound, etc. did not spill anything on it. Was working just fine before.

    I dont want to shut down because if I do and it doesn't fix the issue I won't be able to log back in. I am running 10.5.8

  • Certain web sites are displayed all on the left side of screen, and make the sit three times as long

    sites such as espn are fine but when i click on the tab for college football everything is aligned to the left and all out of place. It's just a white page with all the words and pics running down the left side of the page wich makes the page four times as long as it should be. What is the problem?

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Java Plug-in 1.6.0_13 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    Update the [[Adobe Reader]] plugin to the latest version.
    *http://get.adobe.com/reader/otherversions/

  • Web sites are reporting incorrect location

    I use two computers, a Windows 8 32 bit laptop, and a Windows 64 bit desktop. Both are running Windows 8.
    When I go to some retail web sites (Wal-Mart, Staples, for example) and try to set a store as my local store, they report my location as Newark, New Jersey, some 50 miles north of my actual location (just north of Asbury Park, NJ). Consequently, all of the stores that they report are outside of my local geographical area). I queried one of the retailer's tech support contacts, and they suggested that it might be related to my router's IP address location. I did check my DCM address location, which I manually set (74.105.92.5) by typing it into Google, and it returned an address of Asbury Park, NJ.
    I assume that my router's IP address is different. Is there anywhere that I can see what my router's  (not my computer's) IP address is? Once I know that, I can try and see where it is located, and possibly talk to Verizon about changing it to a local location.

    Not going to help.
    Verizon uses a large pool of IP addresses for each of its areas.  At pretty much anytime your IP could change to another in the pool.  And most of these websites only know approximately where these sites are.  Here in FL they normally think I'm in Tampa.  In NY they normally think I am somewhere in Queens (NYC).

  • Pon opening firefox, some pages are small, others large. On IE, there is a setting where it remembers the page settings. Is there one on firefox I can't find?. in English

    My computer had a virus so I reformatted. This was about a month ago. Now when I open Firefox, the page settings are not correct and I have to keep zooming in and out to be able to read web pages and it does not remember page settings like IE did. Is there a setting for this, to remember page size? I am on Windows XP and Firefox is my browser, version 3.6.4.

    If you need to adjust the zoom and font size on websites then look at:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • I just received my iPhoto book.  It is horrible.  The colour is faded, and the pages are cut on an angle showing a crooked whit line on the bottom of the page.  Who do I contact?

    I just received my iphoto book.  It is horrible.  The photo colours are faded and the pages have been cut on a angle (showing a crooked white line at the bollom of each page.  This is not the view on my home computer.  Who do I contact to get this fixed?

    Contact Apple support
    what does your preview show? -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    LN

  • HT204088 Using my ipad 3, with ios6, I can access the itunes store and the App store when I press the icons, but the viewing pages are blank. I can see the toolbars at the top and bottom. The pages are blank for every tab. Help. The ipad works fine, other

    Using my ipad 3, with ios 6.0, I can access the itunes store and app store by pressing the icons, but the screens are all blank pages, I have tool bars at the top and bottom of the viewing screen, but when I touch the individual tabs, the viewing screen is either white or dark grey...nothing else appears. Help.

    Having the same issue, can someone please enlighten us?

  • Using FF 33.0, pages are not loading when I click on tabs loaded in the background. How do I fix this?

    Additional information: I have Tab Mix Plus and UnLoadTab installed, and neither of them is set to load the tab(s) before selected manually.

    In the tabs menu under the Firefox Menu > Options > Tabs section, is do not load tabs until selected also checked?
    Does this also happen when the add ons are disabled? [[Troubleshoot Firefox issues using Safe Mode]]

  • I have to buttons that I cant remove. The button is on the left side of tabs and on the right side of the tabs. These arent back and forward buttons. When I go to customise they arent shown. How to remove it?

    I have two buttons that I cant remove. The button < is located on the left of the tabs and > is located on the right of the tabs. These aren't back and forward buttons. How can I remove them?
    [https://picasaweb.google.com/dookeybre/DropBox?authkey=Gv1sRgCLyTs7iUlqXE2QE#5594570123175636338 photo of the problem]

    Those buttons are used to scroll through the tabs if you have too many to display. If all of the tabs that you have open are visible, the buttons should not be displayed. If they are displayed all of the time there may be a problem with the theme that you are using.

  • When I enter full screen for a game or video using Firefox the whole "screen" moves to the left, leaving a white space on the right side of my monitor, but the mouse still acts like the image is where it should be, why?

    I have the latest Firefix update, and I am using Windows 7 Home Premium. It's annoying, specifically for games because I have to make sure the cursor is to the right (by a certain amount) of the item I wish to click. This issue is only in Firefox, I have tried in Internet Explorer *shudder* and there is no problem, I do not have any web browsers currently installed.

    Create a New Profile as a test to check if your current profile is causing the problems.
    -> Basic Troubleshooting: Make a New Profile
    * https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
    -> If that New Profile works then you can recover your Bookmarks and Passwords from the Old Profile.
    -> Recovering important data from an old profile
    * https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
    Check and tell if its working.

  • I need a plug in that down loads videos off the web sites you had a simple one with a little fish avitar Icon on right side of my toolbar I loved it I have windows 7 now and can't find it anymore

    the above question

    Open the system menu via Alt+Space and see if you can resize that window.<br />
    If that works then close Firefox to save that setting.<br />
    See also http://kb.mozillazine.org/Resizing_oversize_window<br />
    Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

Maybe you are looking for

  • Bar Chart with Drill Down

    Hello, I have BI Publisher 11 and BI Desktop version installed. I created a Bar chart thriugh RTF template and uploaded, its working fine. I want to create a drill down on each bar in the chart, which will allow me to pass respective value and open a

  • Xfce4 with three ATI 7970 but only one monitor

    Hi everybody, I'm running xfce4 and I have 3 of those graphic cards installed to do opencl computing on them. As I wasn't able to run the Intel driver and the ATI driver in parallel I've connected my monitor to one of the ATI cards. This works well a

  • Looking for a way to programmatically set the visible portion of the front panel when a subVI opens

    I am looking for a way to programmatically set the visible portion of the front panel when a subVI opens.  Haven't found any posts that relate, but I'm not sure how to ask the right question.  To be clear, I want to write a helper VI to go through a

  • The result of a query

    Why can it be tha a query such as select * from People where name like 'A%' don't work in Forms 9i, and a query like select * from People where name like 'ANGEL%' works???? Please, i need help because i've been with this for more than two hours!!!!

  • Failure with cloning database structure and then restore from source db

    Hello, dear experts! I am trying to duplicate a database. First step was to use the DBCA to create a template. Because there is no downtime possible, I only created a template of the structure without user schema and without objects. At another desti