Web pages aren't loading properly

Since installing Mavericks Web pages aren't loading properly. Neither with safari nor chrome. I've added the Open DNS to the DNS pane but makes no difference. Many pages don't download images, and look like the CSS hasn't loaded either. Have emptied browser caches too.

So, I changed my DNS servers to Google's (8.8.8.8 and 8.8.4.4) and all is well.

Similar Messages

HELP! Web pages are not loading properly or not at all!

This just started happening about a week or so ago and my laptop is only 3 months old. I typically use Safari and when this started happening I downloaded Google Chrome and it happens using that also. Either the browser can't find the specified web page or it loads all yucky down the left side of the screen. Also, pictures in my email aren't loading anymore either. This all happens sporadically but enough that it's driving me crazy!

Live chat was closed when you were in the queue that is why I linked you here.
Is the problem still present in safe mode?

My web pages aren't loading when connected to the internet through Ethernet cable?

Yesterday my web pages stopped loading on Safari. I tried loading them on google chrome and had the same problem. I then deleted all saved web site data and reset Safari but this still didn't solve the problem. Finally I restarted with safe mode, where the web pages loaded, but slowly, however when I restarted normally the web pages still weren't loading or partially loading. To test whether this was my computer or the ethernet cable I was connected to, I connected to the wifi at my university, where the web pages loaded perfectly. Plus, when connected to the ethernet cable I could Skype, use Spotify etc., it is just the web pages that are causing a problem. Any suggestions how I can fix this? Thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caught bu|GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|SATA W|ssert|Thrott|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Page doesn't load properly

Last year, I started having a problem loading a particular Web site page that I'd always been able to get before. Everything loads except a graphic box with text that rotates in one corner. There is just blank space on the page where it should be.
I was advised that this was probably a JAVA issue. I removed the Java application from my computer and reinstalled, but the problem persists. Any ideas? I'm using Windows XP on a desktop. It's possible that other Web sites aren't loading correctly, but I wouldn't know it. The site continues to show up properly on my laptop.

The site is:
www.healthatoz.com
I'm an editor at that site so I know how it should look! My colleagues seem to be able to access the site properly on their home computers. I don't get the rotating box of articles that changes daily in the upper left of the page.

Page do not load properly in screenReader mode

Hi,
I am getting the following exception and page is not loaded properly if running in ScreenReader mode. Please help me. I am using ADF version Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.553611.1.1.2.00.
<DCBindingContainer><startDCEvents> [629] com_hyperion_aif_gl_common_setup_userinterface_pageDefs_LocationsPageDef: Start DC events from :-1
<DCBindingContainer><startDCEvents> [630] com_hyperion_aif_gl_common_setup_userinterface_MainPageDef: Start DC events from :-1
<UIXRegion><_warn> Error processing viewId: /location-task-flow-definition/Locations URI: /setup/Locations.jsff actual-URI: /setup/Locations.jsff.
java.lang.IllegalStateException: ADF_FACES-60058:Attempt to re-register component with different model.
     at oracle.adfinternal.view.faces.activedata.PageDataUpdateManager._registerComponent(PageDataUpdateManager.java:257)
     at oracle.adfinternal.view.faces.activedata.PageDataUpdateManager.registerComponentForPPR(PageDataUpdateManager.java:162)
     at oracle.adf.view.rich.activedata.ActiveComponentContext.popActiveComponent(ActiveComponentContext.java:371)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1373)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
     at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer.renderDataCell(BaseColumnRenderer.java:1210)
     at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer.encodeAll(BaseColumnRenderer.java:103)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
     at oracle.adfinternal.view.faces.renderkit.screenReader.TableRenderer.encodeChild(TableRenderer.java:471)
     at oracle.adfinternal.view.faces.renderkit.screenReader.TableRenderer._renderTableContent(TableRenderer.java:820)
     at oracle.adfinternal.view.faces.renderkit.screenReader.TableRenderer.encodeAll(TableRenderer.java:288)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at org.apache.myfaces.trinidad.component.UIXCollection.encodeEnd(UIXCollection.java:527)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:297)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:575)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:241)
     at oracle.adf.view.rich.render.RichRenderer.delegateRenderer(RichRenderer.java:1600)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer.access$900(PanelCollectionRenderer.java:96)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer$PanelCollectionHelper._renderStretchedContent(PanelCollectionRenderer.java:585)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer$PanelCollectionHelper._encodeAll(PanelCollectionRenderer.java:619)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer$PanelCollectionHelper.access$600(PanelCollectionRenderer.java:399)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer.encodeAll(PanelCollectionRenderer.java:335)
     at oracle.adfinternal.view.faces.renderkit.screenReader.PanelCollectionRenderer.encodeAll(PanelCollectionRenderer.java:60)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer.encodeAll(RegionRenderer.java:176)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at oracle.adf.view.rich.component.fragment.UIXRegion.encodeEnd(UIXRegion.java:289)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:402)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$300(PanelGroupLayoutRenderer.java:30)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:651)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:570)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:170)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:255)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:327)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:297)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:575)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:241)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
     at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:1963)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer._renderPane(PanelSplitterRenderer.java:1044)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer._renderSecondPane(PanelSplitterRenderer.java:943)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer.encodeAll(PanelSplitterRenderer.java:197)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
     at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:221)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2572)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
     at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1066)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1501)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:771)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
     at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi,
According to your post, my understanding is that you wanted to reduce the width of contents.
To open a dialog, you can add the javascrip code to the Content Edit Web Part. Of cource, you can modify the width.
<script type="text/javascript">
function showDialog(){
var options = {
url: 'http://serverip/doclib/upload.aspx?IsDlg=1',
width: 800,
height: 800};
SP.UI.ModalDialog.showModalDialog(options);
</script>
<a href="#" onclick="showDialog()">Show Dialog</a>
If you want to open the special div in the Dialog, you’d better to use Jquery popup.
For more information, please refer to:
http://istockphp.com/jquery/creating-popup-div-with-jquery/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Web Pages Don't Load Unless Forced....?

Web pages will not load unless, while they are trying to load... I open another webpage in a new window, which will force the previous one to load. Is there a fix to this? Anyone else experiencing it?
Also, youtube does not work properly either. I have to force the video's to load. So while the video's are loading, I will need to constantly surf the web, through new windows, which will force the youtube video to load.
Very annoying.

I am having both of those problems, I'm looking for a solution right now because both of them have gotten steadily worse since I first got my macbook.

My facebook page will not load properly just shows the text headings on page no graphics like there should be.

My facebook page will not load properly just shows the text headings on page no graphics like there should be.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff .... WILL THIS FIREFOX ERROR SOON BE FIXED ?
Don't know what more to ask. I looked at the known problems and couldn't make any sense of the answers

Upgrade your browser to Firefox 8 and check
* getfirefox.com

Web pages fail to load somtimes using bt infinity

Hi all
had bt infinity for 4 days now and i have a small problem, somtitmes the web pages will not load up but hitting refresh stright away loads the page.
its random and on any site but all i have to do is hit refresh and it pops up.
i never had this problem on my last provider is there some sort of problem with bt infinity getting webpages as this has been happening from day one.
its not a hugh problem but its a pain if it happens when your filling in some infomation and you have to hit refresh.
its not the computer as its been the same software and hardware or months apart from the update to ie10 which i uninstalled back to ie9.
is this a DNS bt infinity problem ? is this normal do people have this problem.
thanks
[URL=http://www.speedtest.net][IMG]http://www.speedtest.net/result/2759601729.png[/IMG][/URL]

its not the sites as i just have to hit refresh the odd time that it happens.
i can go for a couple of hours and it will not happen and then i can go for an hour and have it happen 4 times but saying that it depends on how often i load a webpage or the next link.
its seems to happen the odd time thats all
i never had this problem on my last provider, so its a bt infinity problem.
i have a couple of computers i might try on them and see what happens, see if anything has happend to my main pc since the upgrade to ie10 as i have uninstaled it to ie9 but you never know if its left somthing.
i have to try a different machine and see what happens
[URL=http://www.speedtest.net][IMG]http://www.speedtest.net/result/2759601729.png[/IMG][/URL]

Since the update loaded on my computer my web pages will not load and i get invalid url message

Ever since firefox updated to 17, my web pages will not load. When I type in the search bar and hit the enter button, the address switches to https and i get a message stating that my page is an invalid url and the following message
Reference #9.1db78443.1354339468.3c70717c
I have cleared my histories and cookies and restarted my computer but cant get it to work.
I can type in www.google and go directly to the google page and then gain access to my pages, just not through the firefox address bar.

'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Web pages do not render properly

Since my upgrade to Yosemite, web pages have not rendered properly in Safari. Here is a screen shot of AOL:

1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.
2. Select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Some web pages are not loading on my Macbook pro, Safari,firefox,chrome,opera! Some web pages are loading pictures like thumbnails. Pls i need helpppppppppp!

Some web pages are not loading on my Macbook pro, Safari,firefox,chrome,opera! Some web pages are loading pictures like thumbnails. Pls i need helpppppppppp!

It would help us help you if you provided a link to a non working page.

Wrt54g v8 web interface does not load properly

Hi,
There is a similar thread concerning the v6 web interface, where the background loads, but no text and no links. I also see some data in my case, using a v8 router.
I do not want to start with a firmware upgrade since I am not sure which version I have, since the interface does not work. The v6 problem seemed to be related to Zone Alarm, but I am not using that. I tried shutting down my firewall - didn't help.
I am using Vista SP1, tried IE7 and Firefox.
One thing I did notice was that during router config using the supplied tool there was an error about failing to load a language pack. I wonder if there is anything I can do about that. The original plan was to use the web UI to investigate, but as I said, the web UI won't load properly.
Thanks

Insert the CD for the router setup .... do not run the Setup ,,,,,
Right click & explorer ... it shows folder for language .... open it ... & choose the sorrect language ...

Why won't Firefox 3.6.17 on Mac load certain web pages but will load others?

I'm using Firefox 3.6.17 on Mac (10.4.11), can anyone explain why I cannot access Yahoo, Google, Cnn, Bing, but can access other sites? Those web pages starts to load, then display (Untitled) in tab with a blank page. I have cleared everything in my cache and cookies and reinstalled Firefox and nothing helps. This problem started a few days ago and previously there was no problem and I didn't make any changes to Firefox. Thanks for the help.

Found a solution to the problem. The permissions for the firefox.app file were not set to admin - read-write. After adding this permission using the get info menu item when right clicking the file name in the applications folder, the tab now automatically opens when clicking on Email link.

Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly. Is there a fix for this or are they even working on a fix.

Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly. Is there a fix for this or are they even working on a fix.

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Web pages aren't loading properly

Similar Messages

Maybe you are looking for