Web pages taking a very long time to load; nothing wrong with my internet connection.

I've contacted my ISP and they've told me there is nothing wrong on their end and that my modem is running perfectly. I've done a speed test and my upload is 33mbps+ and download is 5.5mbps+.
The problem is, it takes webpages a very long time to load. Sometimes longer than others, but sometimes it's so long I give up. There doesn't seem to be a difference between when I type in a URL or an IP address directly into the address bar.
One night last week I completely lost the ability to connect to any webpages, and then when I woke up in the morning I was having these problems with connection speed, and the problem has persisted for several days.

Hello Billyeee,
Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro. I would be concerned about this too.
I recommend following the steps in the section titled "Symptom: The Wi-Fi network seems slow" in the following article to resolve an issue like the one you described:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thank you for posting in the Apple Support Community.
Best,
Sheila M.

Similar Messages

My safari is taking a very long time to load pages

I just got my macbook pro and its been acting fine for the past few days. but ive been using it today and its been taking a very long time to load web pages if it even loads them at all. theres a perfect wifi connection and ive already restarted the computer but it still seems to be having a hard time. advice?

Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load

Firefox is taking a very long time to load any web site. It used to be extremely fasta and stable. Is there a current problem? I have the most recent updates installed.

As of the last week, I have not experienced the usual rapid download to signing in to Yahoo, and once there, other sites are experiencing the same lag time. I have to wait till Firefox catches up with the download speed on the web. I am NOT experiencing this with Internet Explorer. I much prefer to use Mozilla, but don't understand why this is happening. Are there any issues that are being worked on from your end? There are NO changes to my computer (Windows 7), except recent updates from Mozilla.

Hello Billyeee,
Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro. I would be concerned about this too.
I recommend following the steps in the section titled "Symptom: The Wi-Fi network seems slow" in the following article to resolve an issue like the one you described:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thank you for posting in the Apple Support Community.
Best,
Sheila M.

I cant transfer the installation files every time i try, the error code 201 displays, and there is nothing wrong with my internet connection

its creative cloud photo shop trial version

Please refer to:
Re: Error 201
Creative Cloud Installer, when downloading Creative Cloud desktop, has Error code 201: "Problem with the download proces…
Creative Cloud Fails to Update (Error code: 201)
downloading error code : 201
They should be able to help you.
Regards
Rajshree

Quicktimes taking very long time to load-Big Q appears instead.

When posting ipod (small) quicktimes to my .mac account (4 per page), the site is taking a really long time to load-a large Q appears instead of the usual Quicktime video frame for a few minutes. They eventually load, but it takes a long time. I've used this program and these files for a year without incident, and now there is this huge delay for my clients. The files aren't very big 2MB-20MB.
Maybe it's my Safari or Firefox acting up?
Here's the site if anyone is able to have a quick look and tell me if it loads quickly on their machine:
http://web.mac.com/chopperfilms/iWeb/Steve%20Gaskin/Projects%201.html
Any thoughts would be greatly appreciated. Thanks so much.

To wait for 27MB to load is too big or rather long wait for your audience/visitor. Set poster frames for all and use movie ref to load only the one the visitor chooses so they don't get the letter 'Q' and use 'fast start' so loading long or big files feels like less waiting. Were poster frames and movie refs getting done automatically by iWeb before?
I am actually getting the letter 'Q' with a question mark in it 60/40 percent of the time in a QuickTime I posted which I am trying to figure how to get rid of.

Sharepoint Report is taking very long time to load

SharePoint(2010) Report is taking very long time to load and display in first attempt but from the next attempt it loads and display result normally. It's urgent..please help how to troubleshoot ...

Hi Kunal,
is there multiple report viewer webpart on page? if so then SharePoint doesn't do well with multiple report viewer web parts. if possible then merge the reports in one.
Try to implement SSRS caching/ Database snapshots for reporting services, it will help you to improve the performance:
reference: http://msdn.microsoft.com/en-us/library/bb522786.aspx
Technet article to troubleshoot report performance:
Troubleshooting Reports: Report Performance
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and says 12 hours remaining. The text "Time remaining" flickers.

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and didnt complete.
The text "Time remaining ... hours" flickers.
I set it to start restoring from the 3GS backup yesterday at 1pm and the time remaining kept on increasing. I left it overnight and at 9am this morning the progress bar hadnt moved and it said 12 hours remaining.
I don't know why its taking so long. I unplugged it and it just set up as new phone. So i did a factory reset and tried again at 4pm and it is now 12am and it says 4 hours remaining and my computer occasionally flickers. (Its not a bad computer, 2 months old, i7, 6GB RAM, Heaps of HDD space). It also messes with google chrome and i cannot browse the web at all while it is trying to restore my iphone.
I have tried restarting my laptop and should i reinstall itunes? I simply dont see why it should take longer than 20 hours to copy over 20GB of data!
Can anyone help me?
Thank you

I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

IPad battery taking a very long time (2 days) to charge

The battery on my iPad 3 has started taking a very long time to charge. If I leave it plugged in overnight (about 8-10 hours) it will gain about 20-30%. It takes about 2 full days to charge fully. I am using the supplied 12W adapter plugged into the wall and I've tried charging it while the iPad is turned off in case something was running and draining the battery but it didn't make much difference.
I assume the battery has just got to a point where it's getting old (although it still lasts a reasonable amount of time once it is charged) but is there anything I can do (short of getting the battery replaced) to help improve the charging time.

I am having the exact same problem. I am using Pages '09 on my Mac. When I emailed myself a Pages file and attempted to open it on my iPad 2 (running iOS 5 beta), it switched over to the Pages app and then the white bar stopped at around what looked to be 3-4% complete.
I tried uploading to Dropbox first, then importing to Pages from there, but I get the exact same result. Please help.

Discoverer report is taking a very long time

Hi All,
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.
Regards
Kumar

Please post the details of the application release, database version and OS along with the discoverer version.
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Long+AND+Time&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Performance&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Messages are taking a very long time to send.

Hello, I'm currently having a big problem with messages taking a very long time to actually send. The spinning wheel will stay there for hours. It only happens in one or two skype groups at a time where I can send messages normally in other groups. Does anyone have any idea how I can fix this?

I have been having this problem for the last 4 releases. I have had some take up to 8 hours to send before. I can usually fix it by signing out then restarting skype. Just restarting skype doesn't work, nor does just signing in again.

Takes a very long time to load pages and is laggy

The new''' FF (4) '''was good at first, but recently it is starting to lack the goodness it once had.
'''It is becoming slower and slower by the day and takes a very long time to load pages. Sometimes the "loading" icon circles for 5 minutes, and whether the page loads or not depends on my luck at that time.'''
Also, it has become seriously '''laggy''':
'''Scrolling''' up and down, typing and '''filling out forms''' (like writing this message) etc have slowed down.
I have deleted the history, and cleared the cache, but to no avail.
Could it be some of the add-ons?
Or is it that FF4 was all hyped up and '''''can't stand to it's name'''''? :)
Please help.
Info: Vista 64-bit, 4GB ram, 2.33GHZ....can't be my computer!

You could try to disable this feature for now by toggling this pref on the <b>about:config</b> page:
*devtools.debugger.source-maps-enabled = false

Is there any way to connect time capsule to a MacBook Pro directly via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...)?

Perhaps via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...? I want to use TimeCapsule as back-up for an archive which is curently stored on a 2 TB WESC HD.

No, you cannot backup via direct usb connection..
But gigabit ethernet is much faster anyway.. are you connected directly by ethernet?
Is the drive you are backing up from plugged into the TC? That will slow it down something chronic.. plug that drive in by its fastest connection method.. WESC sorry I have no idea. If ethernet use that.. otherwise USB direct to the computer.. always think what way the files come and go.. but since you are copying from the computer everything has to go that way.. it makes things slower if they go over the same cable.. if you catch the drift.

TDMS Shell - DB Export from source/sender system taking a VERY long time

We're trying to build a TDMS Receiver system using the TDMS Shell technique. We've run into a situation wherein the initial DB Export from source/sender system is taking a VERY long time.
We are on ECC 6.0, running on AIX 6.1 and DB UDB v9.7. We're executing the DB export from sapinst, per instructions. Our DB export parallelizes, then the parallel processes one by one whittle away to just one remaining, and there we find out that the export is at that point single-threaded, and exporting table BSIS.
BSIS is an FI transactional data table. We're wondering why is the DB export trying to get BSIS and its contents out??? Isn't the DB export in TDMS Shell technique only supposed to get SAP essential only config and master data, and NOT transactional data?
Our BSIS table is nearly 700 GB in size by itself. That export has been running for nearly a week now, with no end in site.
What are we doing wrong? We suspect we may have missed something, but really don't think we do. We also suspect that the EXCLUSION table in the TDMS Shell technique may be the KEY to this whole thing. It's supposed to automatically exclude very large tables, but in this case, it most certainly missed out in excluding BSIS for some reason.
Anyway, we're probably going to fire up an OSS Message with SAP Support to help us address this perplexing issue. Just thought we'd throw it out there to the board to see if anyone else somewhere has run into similar circumstances and challenges. In the meantime, any feedback and/or advice would be dearly appreciated. Cheers,

Hello
Dont be bothered by the other TPL file DDLDB6_LRG.TPL, we are only concerned with DDLDB6.TPl.
Answer following questions to help me analyze the situation -
1) What is the current size of export dump
2) Since when is the exports running
3) What is the size of the source DB? Do you have huge amount of custom developments?
4) Did you try to use table splitting?
5) Do you doubt that there may be other transaction tables (like BSIS) which have been exported completely?
6) Did you update the SAP Kernel of your source system to latest version before starting the Shell package?
7) Were the DB statistics update during the shell or were they already updated before starting Shell?
8) Is your system a distributed system i.e. Central instance and Database instance are on different application servers?

Inventory aged reports are taking a very long time to run

We are using Standard delievered extractors for Inventory. We have build an Aged report and it is taking a very long time to run as more an more data is added. We put the inventory in buckets 0-30, 31-60, .... >365 days. We are aging based on a batch date the user enters. the problem is it has to go through every record to recalculate because they are non cumulative.
any ideas/suggestions on how to make this more efficient? New design?

Hi MM,
We can use snapshot of monthly data from Query and store it in DSO at month level.
We had used APD on Query and then Stored them in DSO1(WO)->DSO2(STD)->Cube->report based on Snap Shot.
From the New Query , calculate the Age.
Rgds
SVU

Notebook Taking a very long time to power off

Hi All,
My notebook (HP ENVY 17-j005tx Notebook) when shutting down only takes a couple of seconds, however it can take upto 5 minutes to power off...
At first i thought some service or program was taking a long time to shutdown, I installed Windows 8.1 SDK Performance Toolkit to try and identify a culprit; ran the command "xbootmgr -trace shutdown -traceFlags BASE+DIAG+LATENCY -noPrepReboot" and succeffully generated trace file.
I noticed the notbook had rebooted in just a few seconds..
Anyhow I proceeded to analyse the trace file using the wpa.exe program anf could not find any program or service taking much time to shutdown!!!
SO I understand now the Windows OS is shutting down nicely though the Notebook is taking a very long time to power off.
Anyone have any suggestions? I do have NVIDIA Driver 337.88 installed and did find another thread here where they suspected this driver version has not been tested by HP and after they applied it their notebook shutdown slower than usual - is this somehting maybe to look at...
I'm currently downoading sp63414.exe NVIDIA driver for my notebook - should I uninstall my current driver and apply HP's?
Jim
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer
This question was solved.
View Solution.

Thanks visruth,..
What I tried is run "msconfig" and boot into "safe mode", rebooted then shutdown, shutdown was back to normal again.
So then reran "msconfig" disabled all non-Microsoft Services, shutdown and again all powered off as normal (quickly after shutdown).
So rebooted and re-enabled all services again using "msconfig". THen disabled the following services, choosing these specifically as I'm not so sure why they should be running and some not know what they are used for...
rebooted and then shutdown and all shutdown and power off was normal...
It seems one of these services is causing the power off to take several minutes....
I suspect the bluetooth services, or the GSService, or IconMan_R, or possibly the Netgear Genie...
Funny enough I did uninstall netgear genie a few weeks ago and see for some unknown reason the Service is still there???? Hmm...
Jim
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Web pages taking a very long time to load; nothing wrong with my internet connection.

Similar Messages

Maybe you are looking for