Web pages won't adjust automatically to the width of my browser.

MS IE will automatically adjust the web page to the size of the browser. But Firefox doesn't do this, so I have to scroll left and right. Can this be fixed?
== This happened ==
Every time Firefox opened

As mentioned above, make sure that your "Browser Fill" is what you are applying the gradient to:
Also, if you do not want your "body" to be white, you can set the fill on that to be transparent:
Hope this helps!
Julia

Similar Messages

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
If that's not what you see, post the contents of the window.

Firefox froze up. So I removed from computer and reloaded. If I close Firefox, can't restart by clicking on the icon. Have to end process in Task Manager. It then starts. Some links on some web pages won't work.

Hi,
As I say in the question I don't know what happened but Firefox just stopped operating and then became erratic. So I removed the firefox programme from my computer and reloaded Firefox.
It now runs normally but I can't run Firefox on two tabs, only one, and if I close it down during a session I can't reopen it using the desk top icon. I go to task manager, processes, and end process for Firefox - then I can start it using the icon on the desktop.
I have also noticed that some links on a web page won't work - javascript is involved.
Thanks for your herlp,
Mike FD

It sounds like you are getting in a hurry.
If you force Firefox to close in a hurry, then it won't normally start until you re-start the computer. There are ways around this, but I'm not going to go into them right now.
None-force way to close Firefox down: Close the program and wait. Do something else. Firefox appears as if it is closed, but it's not. Firefox cleans out cookies and it's cache after you close it. That takes a few minutes. You can't restart it while it's doing house cleaning.
After it is done, then you can restart Firefox normally. You can watch it in the Task Manager.
The same applies if you are installing javascript. You have to wait a few minutes.
As for running it with multiple tabs, I usually have 5 or 6, or more, tabs open at a time. Have no idea what the problem is there. Firefox needs special permission by use of a pop-up option to close with multiple tabs open.

Particular web page won't print

Running Safari with latest Mavericks update, one particular web page won't print on my ethernet connected HP laser printer (Laserjet P2015). The page is at bialetti.com ( Italian coffeemmaker machine co.). When I try to print the page, the printer job page says it's connected and ready to print but instead it sends the printer into a series of error lights starting with both paper jam and low ink then going to noi paper. After a minute or so it reboots itself and returns to a single green light indicating it's ready to print. The job screen then says "broken pipe". What confounds me is that any other web page will print with no problem. What could cause this?

I have tried the pdf route but with the same result. I can print a German eBay posting from Safari but not this Italian site. Another iMac with Mavericks on the same network has the same problem. Connecting to the printer over Wi-Fi or ethernet also refuses to print the page. I may contaqct Hp as the sequence of trouble lights that occur may give them a clue.

Web pages won't load, solution needed. Mac issue

Hi, I don't cannot find how properly to contact apple support so try get in tuoch in this section. So, recently I purchased macbook pro 13 Serial Number ********DTY3, now it's been about two months since I'm using my mac, I thought this is the best product, but getting dissapointed. The main issue which currently expierencing ( about few weeks now ) is that time to time web pages won't opening, even now then I try to open thesun page I get internal errorsaying: ''Internal communication error'' and page wont load at all. I'ts becoming more often and often. Honestly it's really annoying especially when you working on something and you need the page opened, I mean right now. I tried to use opera, google chrome, safari and all the same, if the page wont load in one browser, it wont load in another as well. Tried on win 7 on other laptop, working fine. I thought this is some history or cache issue, so I tried to clean it on daily regular basis, but it doesn't work. Once again this kind of issue becoming more common in daily using, so thinking of leaving apple or in case I get working solution, should I get my mac into the shop and technicans can check it, or I just returned to apple.? (All mac is fully updated with latest updates including web browsers)

you didn't look very hard for support information:
support.apple.com

How do I get pages 5.2 to automatically update the date - use 10.9.2

How do I get pages 5.2 to automatically update the date in my documents - before the update I could do this. Does anybody have the knowledge or a workaround.
If not I will dump pages 5.2 and use my old version!!! this feature is important for any and all businesses using pages??
Any advice on how to achieve this is greatly appreciated
I use a number of macs all using OSX
10.9.2

I have the same problem.
What confuses me is that all the apple provided templates in pages seem to auto update their time and date upon opening.
So there MUST be a way to do it... Ive been unable to work out how...
Amnon

Cannot Add Approved App To A Web Page - App Does Not Show in the App Part Section.

Hi all,
I have successfully add an App from the SharePoint App Store to my SharePoint Site which was developed using SharePoint 2013. The added app was successfully Approved then when I try to add that app using the App Part to a web page I cannot Find it
in the App Part section. I looked in the Site Collection Features & Site Features I couldn't find the app to activate. I don't think I have done some kind of mistake. So then what else I have to do to add that App part to the web page.
Could someone try to solve this matter?
Thanks,
Regards,
Chiranthaka

First, are you sure the App contains an App Part? Not all Apps are written to have app parts. Second, did you add the app to the site collection from Add an App in the Site Contents page? Apps that are added and approved from the Store
are added to the App Catalog for the Web Application. You would normally add them to the Site Collection from there after they are approved.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

HT4061 Can a unlocked (no ATT, Verizon, Sprint plan) iphone 5 bought from an Apple store utilize a phone call while simultaneously checking email, web pages etc.? I know the ATT version can and the Verizon version can't, so can a unlocked Apple?

Can a unlocked (no ATT, Verizon, Sprint plan) iphone 5 bought from an Apple store utilize a phone call while simultaneously checking email, turn by turn, web pages etc.? I know the ATT version can and the Verizon version can't, so can the unlocked version from Apple (which is not yet available) do it?

The tech specs are identical from both wesites of Vietnam and USA--To add further confusion!
Apple Vietnam
GSM model A1428*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE** (Bands 4 and 17)
CDMA model A1429*: CDMA EV-DO Rev. A and Rev. B (800, 1900, 2100 MHz); UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE** (Bands 1, 3, 5, 13, 25)
GSM model A1429*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE** (Bands 1, 3, 5)
802.11a/b/g/n Wi-Fi (802.11n 2.4GHz and 5GHz)
Bluetooth 4.0 wireless technology
Apple USA
GSM model A1428*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 4 and 17)
CDMA model A1429*: CDMA EV-DO Rev. A and Rev. B (800, 1900, 2100 MHz); UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 3, 5, 13, 25)
GSM model A1429*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 3, 5)
802.11a/b/g/n Wi-Fi (802.11n 2.4GHz and 5GHz)
Bluetooth 4.0 wireless technology

I'm trying to share a web page from safari by email but the recipient only sees a ? when they receive the email any suggestions why?

I'm trying to share a web page from safari by email but the recipient only sees a ? when they receive the email any suggestions why?

Ok.. see if emptying the Safari cache helps.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit and relaunch Safari and try sharing a webpage.

I can not load a web page? I have gone through the help pages so many times. Removed, reinstalled, checked preferences, checked security settings. Can anyone offer a possible solution?

I can not load a web page? I have gone through the help pages so many times. Removed, reinstalled, checked preferences, checked proxies, cleared cache, checked security settings. I have tried disabling plugins and addons. Can anyone offer a possible solution? On Mac.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.org/kb/Error+loading+web+sites

When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off. Is there any solution?

When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off.
I'm very sure my printer is set cirrectly.
Can't Firefox shrink to fit when I want to print a selected area of web pages?
This has never occurred in IE.

File >Page Setup -- check your margins, I have set size to 85% which is probably left over from some problem. Also check your printer that it is correctly set to the size of the paper.

My mini iPad is not adjusting automatically to the way i hold it - ie. not spinning round when i turn from landscape to portrait or vice versa - does anyone know how to fix this?

my mini iPad is not adjusting automatically to the way i hold it - ie. not spinning round when i turn from landscape to portrait or vice versa - does anyone know how to fix this?

Understanding the side switch
http://support.apple.com/kb/ht4085

HP Pavillion - Web Pages Won't Load but I'm Connected to the Internet

I was on the internet and then the page seemed to lock up. I closed the browser and reopened it and now I cannot get any web pages to load at all either in I.E. or Firefox. It just says Waiting for "website" and that is it. My other laptop connects to the internet fine using the same modem/router so it is a computer issue. Not sure how it goes from working one minute to not the next. It is a HP Pavillion G7-2270. Thanks for any help you can offer.

Hello , Welcome to the HP Forums! I understand your notebook shows it is connected but you are unable to browse. Can you tell me which version of Windows you are using? To see which version of Windows you are using click here: Which Windows operating system am I running? Here are some popular fixes for networking issues: Powercycle the network:
1. Shut down your notebook.
2. Unplug the power to your router.
3. Unplug the power to your modem.
4. Wait at least 45 seconds.
5. Plug in the modem, and wait for it to come back online.
6. Plug in the router, and wait for it to come back online.
7. Turn on your notebook, and test your connection.
Reset the TCP/IP settings on your PC:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
4. Restart your PC and test.
It may also help to reset the winsock catalogue:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
4. Restart your PC and test. If it seems to be connected but won't browse, flush the DNS:1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "ipconfig /flushdns" without quotes, and press enter.
4. Restart your PC and test.
Reinstall the network adapter drivers:
1. Download the drivers from here but do not run them yet.
2. Go to your start screen/menu and type Device Manager.
3. Expand Network adapters.
4. Right click on the wireless/ethernet adapter and choose Uninstall.
5. Run the downloaded drivers from step 1.
6. Restart your PC and test.
If those three steps do not resolve the issue, try this document published by Microsoft for networking issues: Wired and wireless network problems. You can change the operating system with the dropdown in the upper-right corner of the document. Let me know if that helps!

Web pages won't load unless I move my cursor

Is there anyone out there that can really help me? This problem as evident by others who have posted the same concerns is not malware but with the newer versions of Firefox. At one time I uninstalled my Firefox and reinstalled an older version and didn't have the problem anymore. I believe my computer automatically updated to a newer version and this the reason for the problem. I don't want to do that again as I lost all my bookmarks etc. Is it time for me to start using a different browser? I hope not, as I have always been very happy with Firefox.
I updated to the newest version of firefox and when firefox opens in won't open web pages unless I constantly move my cursor. I running XP. I tried to restore my computer back a few days so as to utilize the older version of firefox, but I ran into another error message. I know this has been a problem for many and I know it has nothing to do with XP as it was running fine before. Please help.

Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Firefox does not print in full web pages. It prints at best the left half of the page. This has only happened recently. It is not my printer as I get full page printing from from Internet explorer and other applications. Help!

Firefox has started printibg only the left side of a web page . I have tried adjusting the settings without any success in fact it made the print area even smaller. I have adjusted all the settings on the print menu but cannot overcome this. How can I return to printing full web pages?

Try the '''''reset''''' described here: 
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

Web pages won't adjust automatically to the width of my browser.

Similar Messages

Maybe you are looking for