Web pages won't print since auto upgrade to 3.6.15

As I stared up this morning Mozilla started an automatic upgrade to 3.6.15. Since the upgrade I cannot print directly from the web. I either have to copy the page over to word and print it there or copy it over to IE where I can still print.

See this: <br />
[http://kb.mozillazine.org/Problems_printing_web_pages]

Similar Messages

Particular web page won't print

Running Safari with latest Mavericks update, one particular web page won't print on my ethernet connected HP laser printer (Laserjet P2015). The page is at bialetti.com ( Italian coffeemmaker machine co.). When I try to print the page, the printer job page says it's connected and ready to print but instead it sends the printer into a series of error lights starting with both paper jam and low ink then going to noi paper. After a minute or so it reboots itself and returns to a single green light indicating it's ready to print. The job screen then says "broken pipe". What confounds me is that any other web page will print with no problem. What could cause this?

I have tried the pdf route but with the same result. I can print a German eBay posting from Safari but not this Italian site. Another iMac with Mavericks on the same network has the same problem. Connecting to the printer over Wi-Fi or ethernet also refuses to print the page. I may contaqct Hp as the sequence of trouble lights that occur may give them a clue.

Web pages won't print after installing Explorer 9

Keep getting script error line 2107, There is no connection for this connection ID when I try to print a web page after installing latest Internet Explorer 9 (OS Windows 7) Please HELP!

Me too! On a HP LaserJet 1020, when I try to print from the Internet. I get error message for line 2107, but the message is different: Unexpected call to method or property access. I can print Word and Excel and other apps just fine. And, I know it is this printer, as I can print to another printer (from HP no less) just fine.
HP, are you out there? Help us!!!! I love my 1020, and don't want to give it up!
Forum members....Have you tried going back to an earlier version? If so, which do you recommend and how is it done?
Thanks!

Officejet 8600 won't print since Yosemite upgrade

I have a problem installing the HP driver since I updated Yosemite. I get these messages.
So I can't install properly.
I have delted the printer in the system preferences, repaired disk permissions, and reinstalled 3.0 driver. The messages above are what I receive during installation.
What I am experiencing regarding printing is my second print job won't print until I put the computer to sleep and then open it up again. The weird thing is is it will print my first job even after it has printed it once.
Here is the print list.
This is what I see... Opening printer connection shows at the top all the time. The job that is listed will print and then say 100% complete when it is finished printing. Then when I send another job this is what the list looks like:
The second job listed won't print until I put the computer to sleep and then it will print.

Hi,
From the Applications folder open the Hewlett-Packard folder and follow the Uninstall option to remove the software.
Next click the Go menu (you may have to click of Finder for the go menu to appear), then click on Computer and open the active volume of your OS, that will more likely be listed as Macintosh-HD.
Open the System folder, then open the Library folder
(If the library folder is hidden and not listed, click on Go > Go to folder, type Library and click on OK.
Open the Extentions folder and locate both of the MaxtorPowSecDriver.kext and the IOFireWireMxBt.kext files, copy those files to your desktop and then delete it from the Extensions folder (for backup porpuses be sure not to delete those till you are fully up and running with no issues).
Next repair the disk permissions as following:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
Once you are done, download and install the following software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-125213-3&cc=us&dlc=en&lc=en...
Finally, reboot your Mac and ensure that everything is up and running.. once you have verified it delete the files copied to your desktop.
Please let me know of any difference,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Xfinity web page takes over browser since Yosemite upgrade

Right after I upgraded to Yosemite, a web page ad for Xfinity WiFi popped up on its own. I closed it and thought nothing more of it. Later when I was browsing on Safari the same Xfinity ad popped up again. This time I tried to go to another web site but the Xfinity page keeps coming back. No matter how I try to change to another web site, the Xfinity page comes up. The only way to get rid of it was to use Time Machine.
Now I just installed a recent upgrade for Yosemite and am now having the same problem with the Xfinity site taking over my growers.
Has anyone else experienced this?

No. I'm not on Xfinity. I just get redirected to their web site.

Safari pages won't load since Mavericks upgrade

Installed Mavericks a few days ago on my iMac and some really annoying bugs have been introduced to Mail (7.3) and Safari (7.0.6). I can't automatically add multiple addresses to emails anymore using the space bar; I have to manually type out certain addresses, add commas, etc. Certain webpages, including youtube and google, won't load on Safari. Chat support had me repair permissions with disk utility, clear cookies and reset safari, but none worked. It was also suggested that I do an SMC reset, a PRAM reset, and a safe reboot. I haven't done any of these, basically because I'm nervous about introducing any more wonkiness that I can't undo. I've been reading about similar problems with Mavericks for months now (I only upgraded because I needed it for Final Cut) , but I never see any solutions. Can anyone help me??? Thanks.

Go step by step and test.
1. Power cycle
     Power off the router. Unplug it from the wall. Wait a while.
     Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
     It will take a   while.
     Restart the computer.
     Start up in Safe Mode
     http://support.apple.com/kb/PH11212
2 Empty Caches
    1. Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    2. Quit Safari if open.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Look for the folder 'com.apple.Safari"
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.
3. Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions
4. Remove all third party addons, plugins and anti-virus software
    Run EtreCheck .
    https://discussions.apple.com/docs/DOC-6173
5. Deselect Proxies if selected.
   System Preference > Network > Advanced > Proxies Tab
   Under "Select Protocol", uncheck any box if selected.
   Click "OK" then "Apply"
Best.

My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?

My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?

Hey clutterfromduluth,
Thanks for the question. I understand that you are experiencing issues with your printer/scanner after updating to OS X Yosemite. To troubleshoot this issue check out the following:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

Web pages won't load, solution needed. Mac issue

Hi, I don't cannot find how properly to contact apple support so try get in tuoch in this section. So, recently I purchased macbook pro 13 Serial Number ********DTY3, now it's been about two months since I'm using my mac, I thought this is the best product, but getting dissapointed. The main issue which currently expierencing ( about few weeks now ) is that time to time web pages won't opening, even now then I try to open thesun page I get internal errorsaying: ''Internal communication error'' and page wont load at all. I'ts becoming more often and often. Honestly it's really annoying especially when you working on something and you need the page opened, I mean right now. I tried to use opera, google chrome, safari and all the same, if the page wont load in one browser, it wont load in another as well. Tried on win 7 on other laptop, working fine. I thought this is some history or cache issue, so I tried to clean it on daily regular basis, but it doesn't work. Once again this kind of issue becoming more common in daily using, so thinking of leaving apple or in case I get working solution, should I get my mac into the shop and technicans can check it, or I just returned to apple.? (All mac is fully updated with latest updates including web browsers)

you didn't look very hard for support information:
support.apple.com

Firefox froze up. So I removed from computer and reloaded. If I close Firefox, can't restart by clicking on the icon. Have to end process in Task Manager. It then starts. Some links on some web pages won't work.

Hi,
As I say in the question I don't know what happened but Firefox just stopped operating and then became erratic. So I removed the firefox programme from my computer and reloaded Firefox.
It now runs normally but I can't run Firefox on two tabs, only one, and if I close it down during a session I can't reopen it using the desk top icon. I go to task manager, processes, and end process for Firefox - then I can start it using the icon on the desktop.
I have also noticed that some links on a web page won't work - javascript is involved.
Thanks for your herlp,
Mike FD

It sounds like you are getting in a hurry.
If you force Firefox to close in a hurry, then it won't normally start until you re-start the computer. There are ways around this, but I'm not going to go into them right now.
None-force way to close Firefox down: Close the program and wait. Do something else. Firefox appears as if it is closed, but it's not. Firefox cleans out cookies and it's cache after you close it. That takes a few minutes. You can't restart it while it's doing house cleaning.
After it is done, then you can restart Firefox normally. You can watch it in the Task Manager.
The same applies if you are installing javascript. You have to wait a few minutes.
As for running it with multiple tabs, I usually have 5 or 6, or more, tabs open at a time. Have no idea what the problem is there. Firefox needs special permission by use of a pop-up option to close with multiple tabs open.

I can't print any web page. after the print command, it wants to save xps files. on cannon printer. vista system

can't print any web page. after the print command, it wants to save as a xps file.
== This happened ==
Every time Firefox opened
== after up grade to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)

I found that Firefox/XPS had deleted all printer driver setups except for the XPS connection. I had to reinstall my printer connection in order to have that selection present in the printer dialogue box.

HT1338 I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions?

I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions??

Okay. That is a good result. It proves you have a working network connection between the Mac and the Dell.
So with the printer not showing using Bonjour, you could try adding the printer manually. With Printers & Scanners open, click the plus button to add and then select the IP icon. You can then enter the IP address of the Dell. Set the protocol to HP Jetdirect-Socket. Leave the queue name blank. Change the Name from the IP address to Dell Wireless. Leave the Location blank and in the Use menu, select the model of Dell you have. Then click Add to complete the queue creation and then see if you can print.

My Kodak AiO 3250 won't print since installing OS X Yosemite.

My Kodak AiO 3250 won't print since installing OS X Yosemite. I get error message on printer, "An unexpected error occurred. Check for problem at the printer a ..." Dialogue box ran out of space, couldn't determine the whole message. I've contacted Kodak, no response so far. Any other suggestions?

Hi guys,
This is not Apple's fault. Kodak is the one responsible for updating drivers for their new printers and from what I have heard Kodak is pulling out of the printer business and are behind on updating their drivers. This video on how to install a new printer might help and explains how sometimes old drivers can still work if you don't use air print.
-crazy

Screen saver won't start since Lion upgrade. Two different machines, same issue.

Screen saver won't start since Lion upgrade. Two different machines, same issue. Help

For anyone following this thread, I've found a solution to my problem. Turns out that a cute widget called FishTank appears to be the culprit. With it running in Dashboard (even when I don't see Dashboard) the Screensaver and Sleep functions don't work. I turned it off, not because I'm clever, just because I tired of it, and voilà, Screensaver and Sleep are now working. It can stay in my widgets list without any problem, it just can't be turned on. I'm going to delete it anyway, however.
Hope this points the way to solutions for some of the rest of you!
Cheers!
Keith

My trash won't empty since I upgraded to Lion. Other than using rm -rf ~/.Trash/* in the terminal what can I do. Reparing permissions didn't hpl. regards robin

My trash won't empty since I upgraded to Lion.
Other than using rm -rf ~/.Trash/* in the terminal what can I do. Reparing permissions didn't hpl.
regards
robin

I have the same problem. I can put things into the trash, but when i empty the trash it makes the crumple noise like its throwing it away and the files stay in the trash and the icon stays full. I have 10.7.2. I also have Parallels installed on my machine.
Before this problem, I was unable to add files to my trash can and then I removed this program called CleanMyMac, which I guess wasn't compatible with Lion, and now I can at least add items to the trash can. It seems I am having a lingering issue due to that program.
I have a case with Apple Senior Support Analysts and they can't figure it out...
Please help!! I do not want to format and start all over just to empty my trash can
I also do not want to install Trash It (which would empty the trash i've heard) but will not resolve my issue only cover it up.
Thanks!!

I just downloaded Firefox 6.0. The web page asked if I wanted to upgrade. What is the most recent version of Firefox and why can't I get it denoted in the propperties link? Also why is it not compatible with AVG Tool Bar?

I just downloaded Firefox 6.0. The web page asked if I wanted to upgrade. What is the most recent version of Firefox and why can't I get it denoted in the propperties link? Also why is it not compatible with AVG Tool Bar?

Firefox 6.0 is the current version.
Get what denoted in what properties link.
You can get the version number in Help -> About Firefox,
and in '''about:support''' typed into the Location bar, and you can use JavaScript to list the user agent -- javascript:navigator.userAgent
I'm not aware of any version of Firefox from Fx 2 on up to Fx 6 where "AVG Safe" is not a problem. Crashes aren't the only failures caused.
* http://kb.mozillazine.org/Problematic_extensions
* https://addons.mozilla.org/en-US/firefox/blocked/
* https://addons.mozilla.org/en-US/firefox/blocked/i6
* https://bugzilla.mozilla.org/show_bug.cgi?id=527135

Web pages won't print since auto upgrade to 3.6.15

Similar Messages

Maybe you are looking for