Web Part - Report Viewer - Override Parameters are not saving

When I select the override option and check the one parameter out of the list and click apply, or OK, the Web Part refreshes and resets the parameter list with all the items checked again.

Hi Developer_46038,
i tried this steps in sharepoint 2013 SP1,
·         A report
viewer web part is added to a standard page
·         The parameters are loaded in the web part settings, and the option to
override the default parameter is selected and overridden with the desired value.
·         After pressing OK, the
report loads as expected.
·         After pressing "Stop Editing" on the page, the
report still appears as expected.
·         If the page is reloaded, the
parameters have been removed.
seems the issue reproducible there, i already submit a request for checking, but i cannot make any guarantee regarding the time process.
if should you need urgently, please open a ticket,
http://support.microsoft.com
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • ITunes view columns - changes are not saved

    Hello there,
    When I make changes to the column size in the iTunes list view; like title, artist, album title ... it does not seem to save, regardless if I am on the iPhone list view, shared library list view, local music view, etc. When I close iTunes and open it again, it is often reset to the default settings. Where are these defaults settings defined? The default settings that it resets to, are those that came the way iTunes was first install, but how can I save these column size changes?
    Thanks for all and any replies.
    - Applies to my Windows iTunes and Mac iTunes.

    KHCrowley,
    Welcome to Apple's discussions.
    Try clearing your browser cache, and then take another look. The changes are most likely there.
    Mark

  • Odata error: Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view

    I have created scripted calculation view
    I can add parameter in aforesaid calculation view
    It fetches me right result
    But when I am to call aforesaid calculation view from odata service I am getting following error:
    ERROR      zcustsearch/services/AutoComplete.xsodata
               Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view.
    Any solutions

    Don't reference it via the catalog object. Otherwise only the runtime Column View will be seen. Instead you should specific the view as the repository object.  This means no schema and use package path::view name.  Like this example from the SHINE content:
    service namespace "sap.hana.democontent.epmNext"  {
       "sap.hana.democontent.epmNext.models::CV_SALESORDER_YEAR_COMPARISON"
        as "salesYear" 
      keys generate local "ID"
        aggregates always
        parameters via entity "InputParams"; 

  • Avilable Web Parts to view word documents

    I have added Excel & Visio web parts inside my publishing site collection, to view visio & excel documents. but seems there is not any available web parts for viewing word documents, so can anyone advice about this ?

    The difference is based on the existence of a shared service app for Excel and Visio.  You can view Word Documents using Office Web Apps. Excel files can be viewed using either Office Web Apps or Excel Services.  The web part you are referring
    to is part of Excel Services.  Visio services also has a web part, but has no support in Office Web Apps.   But since there is no Word Service App there is no web part available for viewing word documents, only Office web apps itself.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.
    Yes i have been using excel services & Visio services, as we do not have office web apps. so is there any way to view word documents inside the web browser, other than using office web apps?
    thanks

  • SSRS,MDX- Passed parameters are not hitting the main query in Dataset

    I have created a SSRS report which has to accept two parameters i.e., store name, Date(to show sales on particular date) in report. which are working fine for me. but, those passed parameters are not hitting the main query in main Dataset. what ever i
    pass in parameters, it is displaying all the rows(every city values). i think i am not correct in creating the statement in  Main dataset query, to receive those 2 parameters into the main query. can anybody please help me how to create the statement
    in main date set to display the results for the exact parameter i am passing(which has to be in MDX).
    ram

    Hi ramprasad74,
    According to your description, you want to use parameter in the report, then after parameter values are selected, corresponding data will be displayed in the report. But the parameters do not work and all the rows are displayed.
    To pass parameter to main report dataset, we need to define parameter for MDX query and assign parameter name same as SSRS report parameter. For detail information, please refer to the following steps:
    Create a Dataset to retrieve data for Store name parameter.
    Create Store name parameter, type name and prompt, set Date type to Text, check Allow multiple values check box, then select get values from the dataset.
    Create a Dataset for Date parameter.
    Create Date parameter, type name and prompt, set Date type to Date/Time, then select get values from the dataset.
    Create a new dataset used to retrieve data for the report, add statement like below to the mdx query: {STRTOMEMBER(@Date)} * {STRTOSET (@Store_name)}.
    In Query Designer pane, click Query Parameters and assign parameter name same as SSRS report parameter.
    For more information about SSRS Report with Single and Multi Selection Parameter using MDX Query, please refer to the following blog:
    http://www.codeproject.com/Articles/799265/SSRS-Report-with-Single-and-Multi-Selection-Parame
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.

  • Parameters are not created for M0001 feature

    Hi Friends,
    During Hiring activity in IT0002 after entering all the fields, while saving i got a warning message - parameters are not created in M0001 feature. Please give me your views & answers why i got this message.
    Edited by: sharada vemula on Apr 4, 2010 11:31 AM

    Hi,
    Go to PE03 enter M0001
    create a structure till Personal Area and enter **** unless you want to maintain Administrator group in here.
    Hope this helps
    Ajay

  • Old reports / views should be deactivated (not to run)

    Hi Experts,
        We have set of reports in production which are not optimized for performance. So now we have created new set of reports and transported to production. Now we want to de-activate all old reports and views, so that business will run only new reports, by mistake also he can't run old reports.
    Is there a way to update only DB tables or is there any other manual method available to de-activate or not to run old reports / views?
    Thanks in advance.
    Arun Thangaraj

    Hi Arun,
    If you are sure that your user is not required the old reports in future, right thiing is to delete the reports.
    Actually de activate concepts comes when any thing is used by your database(tables), if you are not using the report then there is no question of DB tables usage.
    Regards
    Lalit

  • Some parameters are not shown in parameter dialog

    Hello,
    I created a VB.NET program using VS2005 sample.
    When the program refers to CR10's DLLs (VS2005 bundle),
    it prompts all parameters correctly.
    But when the program refers to CR12's DLLs, some parameters are not prompted.
    I installed merge module 12.2.
    I also checked CR11 (merge module 11.5) and  found the result is equal to CS12.
    Thank you

    Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • Web template changes are not saved.

    Hello Experts,
    I making a small change to an existing Web Template namely changing the tab page 1 to tab page 2 and  vice versa.
    I could see the message Changes are saved but at the end web template is same like as it was.
    Any idea why changes are not being saved and how to over come this will be of great help.
    Thanks in anticipation.
    Best Regards.

    Hi.
    The changes are not saved in WAD or has not affect when executing the WAD ?
    Regards.

  • In the Account Analysis Report Payables, currency precissions are not refle

    Hi All,
    In the Account Analysis Report Payables, currency precissions are not reflected propely.
    The functional currency is KWD (Precission - 3). In the standard report (Account Analsyis Report) parables application, the output is shown in 2 decimals. The output should be shown in 3 precisions.
    Regards,
    Raju.

    Some how the rtf (XLAAAR01) is not looking at the currency precision.
    You may customize the rtf.
    By
    Vamsi

  • Scheduling parameters are not defined for production orders

    Hi All,
             when i convert the planned order to production order  i got this massage popup coming  Scheduling parameters are not defined for production orders . please let me know this .

    Hi,
    One of major customization steps for the order type is missing. Run OPU3 and maintain settings for the order type you are using. You may copy settings from an older type.
    Regards.

  • RFC Function Module - Message Reference parameters are not allowed with RFC

    Hi,
    I’ve checked the Remote-Enabled Module radio button, declared Import and Export parameters using ‘Type’ typing and checked the ‘Pass Value’ in export and import parameters but I still receive message ‘Reference parameters are not allowed with RFC’ and not able to activate the function module.
    Am I missing something?
    Regards,
    ...Naddy

    Hi all,
                   I faced the same problem and solved it ,
    You have defined a reference parameter for a remotely called
      function module. However, only value parameters are allowed
      for this type of module.
      Procedure
      Change the reference parameter to a value parameter.
    Guys  pls .don't leave the thread un-asnwered when you solved problem , post the solution it might be useful for others also.
    Regards
    Krishna Acharya

  • Parameters are not Passed in a Struts(JPDK) Portlet

    Dear All,
    I am getting below problem in Oracle Portal Environment(10.1.2)
    I am passing news_id parameter along with title from one page to another page like below code
    In CompanyNewsShowPage.jsp
    <tr>
    <td class="desc">
    <%
    page_url ="/showpageNews.do?news_id="+com_events[0];
    // System.out.println("value of page url : "+ page_url);
    %>
    <input type="hidden" value="<%=page_url%>" id="hdnpageurl"/>
    <pdk-html:link page="<%=page_url%>" styleClass="desc">
    <%
    String obj_title= com_events[1];
    if((obj_title.length())>30)
    out.println(obj_title= obj_title.substring(0,15)+ "...");
    else
    out.println(com_events[1]);
    %>
    </pdk-html:link>
    </td>
    TO passing
    shownews.jsp
    The code for accepting parameter is below
    <%
    System.out.println("value of newsid :"+ newsid);
    String news_id=request.getParameter("news_id");
    if(news_id !=null)
    newsid= Integer.parseInt(news_id);
    System.out.println("value of newsid :"+ newsid);
    %>
    Kindly any one help me how to pass the parameter from one page to another page above problem, because our go live date is very close.
    But same code it is works in IE browser, but not working after deployed in Oracle Portal Environment.
    However, the
    parameters are not passed from the form to the Struts action. When retrieving the parameters, then
    a null value is retrieved, even when the parameter was specified in the form.
    Regards,
    Chandrashekhara
    Message was edited by:
    user487286
    Message was edited by:
    user487286

    Hi Anton,
    I make some tests and it appeared that it's only the output parameter which is not passed through the step (why ?).
    I get this output parameter by a post-running action which parse the joblog and retrieve the sequence number at the line with the pattern  "vendor" (hereunder) :
    100601 20091008 00 516 Job started  0       
    100601 20091008 00 550 Step 001 started (program ZCO_MANAGE_FILE, variant ECLO2, user ID ABAPUSER)  0 001 ZCO_MANAGE_FILE ECLO2 ABAPUSER   
    100601 20091008 00 001 No vendor specified  0 00233      
    100602 20091008 00 517 Job finished  0
    Here is the postrunning action script wich was working before we upgrade :
      JobFile log = jcsJob.getJobFileByName("log");
      if (log != null)
        com.redwood.scheduler.api.search.SearchResultSet myResultSet = log.search("No vendor specified");
        com.redwood.scheduler.api.search.SearchResult myResult = null;
        while (myResultSet.next())
          myResult = myResultSet.getSearchResult();
          String [] line = myResult.getLineText().split(" ");
          JobParameter jp = jcsJob.getJobParameterByName("VendorCode");
          if (jp != null)
            jp.setOutValueString(line[line.length-1]);

  • Exits with parameters are not displaying in CO Substitution

    Hi there...
    I am having this problem...I´ve created a CO substitution following all the steps involved, works fine when I define the parameter:
      exits-param = c_exit_param_none in form GET_EXIT_TITLES
    The transaction code OKC9 displays the exit with the field:
    parameters = "No change"
    but when I changed the parameters in my exit for use parameters:
    exits-param = c_exit_param_field
    After the activating and generating with RGUGBR00, the exit doesn´t display in exits availables in OKC9 in fact all the exits with using parameters are not displaying in OKC9.
    What am I doing wrong here?
    Thanks in advance!!!
    Alfredo
    Amber

    Calibrate your monitor.

  • The MRP parameters are not maintained in plant JK01

    Good morning,
    t-code : md04 (stock req.list) but got an error.
    MRP parameters for plant 'JK01' have not been maintained
    Message no. 61273
    Diagnosis
    The MRP parameters are not maintained in plant JK01.
    Procedure
    Maintain MRP parameters in Customizing.
    how to maintained mrp parameter fro plant JK01 ?
    Thank you.

    Hi Robert,
    First maintain the plant parameter using  tcode OMI8 for the plant JK01.
    this will solve ur issue.
    hope it wud have answered ur question
    reward if useful
    shawn

Maybe you are looking for