Web Properties Dialog

I have created classes extending the Document object through the iFS Manager interface. When I invoke the Properties dialog on documents (instantiated as this class) from the web interface, I see attributes that I have created but receive the following message:
"IFS-10407: Invalid Attribute Name ({0})"
This causes the "Language" and "Character Set" values to be suppressed and the dialog does not display the Ok and Cancel buttons.
Anyone have an idea what may be causing this?
TIA,
-Lee

After you install Conifgurator, you can find such a file \National Instruments\NI-FBUS\Data\mfr_info.txt. The manufacturer name and web address both come from this file.
You can import image for your device in Configurator software by double-clicking on the image field. All the images are stored in \National Instruments\NI-FBUS\Data\ImageRes\
Ryan Shi
National Instruments

Similar Messages

Option help in Save for Web & Devices dialog

When down sampling images for use in a DPS folio, what settings should be chosen in the Save for Web & Devices dialog in Photoshop?

I need to figure out why my trim option is always grayed out. It's saved in PSD format, yet the option to trim the transparent pixels is grayed out. why is that? what am I doing wrong? I must have to change something.
Thanks in advance, Linda

In Object Properties dialog box, modify "tab path"...

For FrameMaker versions up to and including 8 (and I suspect 9).
Select a graphic, then click in sequence
ESC g o to open the
Object Properties dialog box. By default the dialog box opens with the insertion point in the
Width text entry area.
Now press TAB four times: The insertion point moves sequentially to the
Height,
Top,
Left, and then
Color text entry areas.
I wish the last movement, to the
Color text entry area, was replaced with movement to the
Percent text entry area. This would enable me to use the keyboard to efficiently configure the size, position, and scaling of a graphic.
As it is, I virtually never need to select the graphic's
Color text entry area and the movement of the insertion point to that essentially useless tool drives me crazy: It makes me TAB all the way 'round the dialog box or grab the pointing device to get it to the
Percent text entry area...
Cheers,
Riley

Odd... What does your properties dialog look like? Can you post a screenshot of the dialog box? Also, what version of LabVIEW are you running?
Message Edited by smercurio_fc on 06-03-2008 04:56 PM

Web Dynpro Dialog Box / Modal Window is not working properly on firefox

Hi All,
We are having problems with Web Dynpro Dialog Box / Modal Window in Firefox. Dialog Box / Modal window won't show up properly on. They look like transparent windows. Our server is Netweaver 7.0 SP 19.
Same code is working fine in Internet Explorer. Please advise on this. Below is the code I am using.
Modal Window:
IWDWindowInfo windowInfo = wdComponentAPI.getComponentInfo().findInWindows("SomeWindow");
IWDWindow sampleWindow = wdComponentAPI.getWindowManager().createModalWindow(windowInfo);
sampleWindow .show();
Confirmation Dialog Box:
IWDWindow dialogBox = wdComponentAPI.getWindowManager().createConfirmationWindow(
"Click OK to save data", IPrivateSampleView.WD_EVENTHANDLER_ON_ACTION_SAVADATA, "OK");
dialogBox.show();
Thanks
Sreekanth

Hi,
Maintenance and Availability of SAP NetWeaver 7.0 [original link is broken]
Last Item:
Product Availability Matrix
SAP NetWeaver 7.0 Product Availability Matrix   (SMP login required)
Application Server - Java
FIREFOX 2.0 LINUX REDHAT EL3/IA32 32BIT Released 01.04.2008
FIREFOX 2.0 LINUX REDHAT EL4/IA32 32BIT Released 01.04.2008
FIREFOX 2.0 MAC OS X 10.2 Released 01.04.2008
FIREFOX 2.0 MAC OS X 10.3 Released 01.04.2008
FIREFOX 2.0 MAC OS X 10.4 (TIGER) Released 01.04.2008
FIREFOX 2.0 SUSE LINUX 10.1 Released 01.04.2008
FIREFOX 2.0 SUSE PROFESSIONAL 9.3 Released 01.04.2008
FIREFOX 2.0 SUSE SLED 10 Released 01.04.2008
FIREFOX 2.0 WIN 2000 PROF. Released 01.04.2008
FIREFOX 2.0 WIN VISTA 32-BIT Released 01.04.2008
FIREFOX 2.0 WIN XP 2002 HOME 32-BIT Released 01.04.2008
FIREFOX 2.0 WIN XP 2002 PROF. 32-BIT Released 01.04.2008
FIREFOX 2.0 WINDOWS SERVER 2000/IA32 32BIT Released 01.04.2008
INTERNET EXPLORER 6.0 WIN 2000 PROF. Released 01.02.2006
INTERNET EXPLORER 6.0 WIN XP 2002 HOME 32-BIT Released 01.02.2006
INTERNET EXPLORER 6.0 WIN XP 2002 PROF. 32-BIT Released 01.02.2006
INTERNET EXPLORER 6.0 WINDOWS SERVER 2000/IA32 32BIT Released 01.04.2008
INTERNET EXPLORER 7.0 WIN VISTA 32-BIT Released 01.04.2008
INTERNET EXPLORER 7.0 WIN XP 2002 HOME 32-BIT Released 01.04.2008
INTERNET EXPLORER 7.0 WIN XP 2002 PROF. 32-BIT Released 01.04.2008
Hope it helps
Regards,
Daniel

Change GMT time and 12 hours format in the Callback Properties dialog box

Hello! There are CAD 7.6.3 for UCCE. In the Callback Properties dialog box for personal CallBack displays the Customer's Current Time in GMT 0 and the data format of 12 hours.
How to display in this window, the time is GMT +3 and change time in 24-hours format?

Hi,
Please check your local time format settings by the following steps:
1. Click the Time in the right bottom corner taskbar.
2. Click Change date and time settings.
3. In Date and Time window, click Change data and time.
4. In Date and Time Settings window, click Change calendar settings.
5. In Customize Format window, switch to Time tab.
6. Change the Short time format as H:mm instead of h:mm tt, set the Long time as H:mm:ss.
7. Click OK to save the setting to have a try.
Regards,
Winnie Liang
TechNet Community Support

J2ee in 620 Web AS Dialog server is not coming up

Hi all,
We have installed new 620 WEB AS dialog server in same host as CI , Installtion completed successfully i am not able to see the ports and j2ee in SMICM.. it showing as True for J2ee configured but ports are not there and J2ee operational is False..
I have checked the sapinst    for prots file and able to see them ..
I am giving the dev_disp & dev_w17 trace files info below/
Please suggest .....
Thanks,
Subhash.G
Dev_disp.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
trc file: "dev_disp", trc level: 1, release: "640"
Wed Jan 6 17:59:41 2010
kernel runs with dp version 131(ext=102) (@(#) DPLIB-INT-VERSION-131)
length of sys_adm_ext is 312 bytes
sysno      07
sid        UWX
systemid   370 (SUN on SPARC CPU with Solaris 2.2)
relno      6400
patchlevel 0
patchno    139
intno      20020600
make:      single threaded, ASCII, 64 bit
pid        19525
***LOG Q00=> DpSapEnvInit, DPStart (07 19525) [dpxxdisp.c   1098]
     shared lib "dw_xml.so" version 139 successfully loaded
     shared lib "dw_xtc.so" version 139 successfully loaded
     shared lib "dw_stl.so" version 139 successfully loaded
     shared lib "dw_gui.so" version 139 successfully loaded
     shared lib "dw_mdm.so" version 139 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >uxgfdv11_UWX_07                         <
DpShMCreate: sizeof(wp_adm)          15408     (856)
DpShMCreate: sizeof(tm_adm)          77455488     (15488)
DpShMCreate: sizeof(wp_ca_adm)          444400     (88)
DpShMCreate: sizeof(appc_ca_adm)     444400     (88)
DpShMCreate: sizeof(comm_adm)          1728000     (432)
DpShMCreate: sizeof(vmc_adm)          0     (504)
DpShMCreate: sizeof(wall_adm)          (560040/862312/80/104)
DpShMCreate: SHM_DP_ADM_KEY          (addr: ffffffff6f800000, size: 81516600)
DpShMCreate: allocated sys_adm at ffffffff6f800000
DpShMCreate: allocated wp_adm at ffffffff6f8018d8
DpShMCreate: allocated tm_adm_list at ffffffff6f805508
DpShMCreate: allocated tm_adm at ffffffff6f805530
DpShMCreate: allocated wp_ca_adm at ffffffff741e35b0
DpShMCreate: allocated appc_ca_adm at ffffffff7424fda0
DpShMCreate: allocated comm_adm_list at ffffffff742bc590
DpShMCreate: allocated comm_adm at ffffffff742bc5a8
DpShMCreate: allocated vmc_adm_list at ffffffff744623a8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at ffffffff744623d0
DpShMCreate: allocated wall_adm at ffffffff744623d8
Wed Jan 6 17:59:42 2010
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0xfffffffd58c00000
EsStdInit: Extended Memory 8192 MB allocated
<ES> 2047 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 19529
argv[0] = /usr/sap/UWX/D07/j2ee/cluster/dispatcher/go
argv[1] = go
argv[2] = -DCONNECT_PORT=47851
argv[3] = -DLISTEN_PORT=47852
argv[4] = -DSAPSYSTEM=07
argv[5] = -DSAPSYSTEMNAME=UWX
argv[6] = -DSAPMYNAME=uxgfdv11_UWX_07
argv[7] = -DSAPPROFILE=/usr/sap/UWX/SYS/profile/UWX_D07_uxgfdv11
argv[8] = -DFRFC_FALLBACK=ON
argv[9] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE dispatcher node
DpJ2eeStart: j2ee state = STARTED
Wed Jan 6 17:59:49 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( uxgfuwx) [dpxxdisp.c   9977]
DpStartStopMsg: send start message (myname is >uxgfdv11_UWX_07                         <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
DpJ2eeLogin: j2ee state = CONNECTED
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
MBUF state ACTIVE
Wed Jan 6 17:59:50 2010
DpModState: change server state from STARTING to ACTIVE
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Dev_w17
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
rc file: "dev_w17", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
M sysno      07
M sid        UWX
M systemid   370 (SUN on SPARC CPU with Solaris 2.2)
M relno      6400
M patchlevel 0
M patchno    139
M intno      20020600
M make:      single threaded, ASCII, 64 bit
M pid        19613
M
M
M Wed Jan 6 17:59:49 2010
M ***LOG Q01=> tskh_init, WPStart (Workproc17 1 19613) [thxxhead.c   1146]
M calling db_connect ...
C Got ORACLE_HOME=/oracle/UWX/102_64 from environment
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPUWD's password
C Connecting as /@UWX on connection 0 (nls_hdl 0) ... (dbsl 640 221106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1 104f33560 104f3c540 104f3bed8
C Attaching to DB Server UWX (con_hdl=0,svchp=104f3be08,svrhp=104f3e2e8)
C Starting user session (con_hdl=0,svchp=104f3be08,srvhp=104f3e2e8,usrhp=104f47d80)
C Now '/@UWX' is connected (con_hdl 0, nls_hdl 0).
C Got SAPUWD's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=104f3be08,usrhp=104f47d80)
C Now I'm disconnected from ORACLE
C Connecting as SAPUWD/<pwd>@UWX on connection 0 (nls_hdl 0) ... (dbsl 640 221106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1 104f33560 104f3c540 104f3bed8
C Starting user session (con_hdl=0,svchp=104f3be08,srvhp=104f3e2e8,usrhp=104f47d80)
C Now 'SAPUWD/<pwd>@UWX' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C DB instance UWX is running on uxgfdv11 with ORACLE version 10.2.0.4.0 since JAN 06, 2010, 14:59:54
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20100106 175949 uxgfdv11
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 17 0 0
M SHM_PRES_BUF               (addr: fffffffd50c00000, size: 45000000)
M SHM_ROLL_AREA          (addr: fffffffd48800000, size: 134217728)
M SHM_PAGING_AREA          (addr: fffffffd40400000, size: 134217728)
M SHM_ROLL_ADM               (addr: ffffffff77b42000, size: 2672386)
M SHM_PAGING_ADM          (addr: ffffffff6f600000, size: 656416)
I Profile configuration error detected, use temporary corrected setup
I Shared Pool 40: ipc/shm_psize_40 = 642000000 (too small)
I Shared Pool 40: (smaller than min requirement 685904088)
I Shared Pool 40: (estimated size assumed 690000000)
M ThCreateNoBuffer          allocated 352144 bytes for 1000 entries at fffffffd17004000
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 7440 bytes (50 server) at ffffffff6f500000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 17 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 17, WP_CNT = 18, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: fffffffd0a800100, size: 200000000, end: fffffffd166bc300)
B dbtbxbuf: Buffer TABLP (addr: fffffffd09400100, size: 20480000, end: fffffffd0a788100)
B dbexpbuf: Buffer EIBUF (addr: fffffffcff400108, size: 163840000, end: fffffffd09040108)
B dbexpbuf: Buffer ESM   (addr: fffffffcfec00108, size: 4194304, end: fffffffcff000108)
B dbexpbuf: Buffer CUA   (addr: fffffffd3a652108, size: 5120000, end: fffffffd3ab34108)
B dbexpbuf: Buffer OTR   (addr: fffffffcfe400108, size: 4194304, end: fffffffcfe800108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Wed Jan 6 17:59:50 2010
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1053234a0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at fffffffd3ab38060
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at fffffffd3ab386d8
S    using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 8kb, total admin_size: 11328kb, dir_size: 11272kb.
A Attached to PXA (address fffffffcebc00000, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=fffffffd5911e000 leng=20938752 end=fffffffd5a516000)
A >> Shm MMADM area (addr=fffffffd5933e9c0 leng=144960 end=fffffffd59362000)
A >> Shm MMDAT area (addr=fffffffd59364000 leng=18554880 end=fffffffd5a516000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 54
M ThrCreateShObjects          allocated 18772 bytes at ffffffff5ae00000
N SsfSapSecin: putenv(SECUDIR=/usr/sap/UWX/D07/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/UWX/SYS/exe/run/libsapcrypto.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W    ITSP Running against db release 620!
W    ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
B   max_blocking_factor =   5, max_in_blocking_factor      =   5,
B   min_blocking_factor =   5, min_in_blocking_factor      =   5,
B   prefer_union_all    =   0, prefer_union_for_select_all =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B   select *            =0x0f, character encoding          =SBCS / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
S using action cache size 20 (prof=20)
S creating spool memory service RSPO-ACTIONS at fffffffd3ab3d5e8
S catch mode for rspo_rperf disabled
L
L Wed Jan 6 18:01:09 2010
L Auto-Deletion of spool requests: Disabled, note 498668
L
L Wed Jan 6 18:07:09 2010
L Auto-Deletion of spool requests: Disabled, note 498668
L
L Wed Jan 6 18:13:09 2010
L Auto-Deletion of spool requests: Disabled, note 498668
L
L Wed Jan 6 18:18:10 2010
L Auto-Deletion of spool requests: Disabled, note 498668
L
L Wed Jan 6 18:24:10 2010
L Auto-Deletion of spool requests: Disabled, note 498668
L
L Wed Jan 6 18:30:10 2010
L Auto-Deletion of spool requests: Disabled, note 498668
L
L Wed Jan 6 18:36:10 2010
L Auto-Deletion of spool requests: Disabled, note 498668
L
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Dear Subhash,
If your Ci is running then http://hostname:port should give you a start page, but if you login to perticular new instane with http://new host:new port and if this is returning some error then we can categorize as we have problem in new instance.
Can you please paste .out logs from your work dir for new instance.
and chek the memory settings according to following notes:
Note 696410 - Java VM settings for EP6 on J2EE 6.20
729178 - Java VM setting for applications running on J2EE Engine 6.20
634689 - Central Note for Memory Issues, SAP J2EE Engine 6.20
And specify your system configuration as well ..
Regards
Shailesh

Report file properties dialog on MS Vista

Post Author: DCox
CA Forum: General
My company runs and distributes CR v11.x as part of our application currently running on XP. We are migrating our application to Vista. Our application, written in PowerBuilder v10.5, reads some of the user-defined file properties of the report (.rpt) file via the OLE API. On XP, the specific properties I need to see are on the Summary tab of the properties dialog you get by right-clicking the .rpt file in the XP Windows Explorer.
Our application uses the Title, Subject Keywords and Comments properties in XP to build a Tree of available reports in our application. These properties are not displayed in Vista's property dialog for CR report files built on XP and copied to Vista. Is there a version of CR that will display these properties? Our application retrieves these properties on Vista but they are not visible in the Vista properties dialog.
Also, is there information about the CR API (for Vista) that will show me how to access the MS OLEDocumentProperties SummaryProperties and CustomProperties?
Any assistance is appreciated.

That is an excellent find. I would definitely let Apple know.
http://www.apple.com/feedback/iphone.html
http://www.apple.com/feedback/itunesapp.html

Sp 2010 web page dialog issue-appearing with master page

hi,
am opening a pop up which is a application page[_layouts folder] in a modal dialog box , with a label ; and this page has code behind also.
when i loaded this dialog box on a click of a link, it shows the site master page and ribbon.
i dont want to show the master page and ribbon etc.
can anyone tell what code i need to write so that it will open as a web page dialog without applying the site/application master page and ribbons

Hi SaMolPP
have you tried the isDlg=1 ?
http://contoso.com/mysite/Pages/myApplicationPage.aspx?isDlg=1
PP

Can i place controls from the properties dialog of an express vi on the front panel?

I'm using the spectral measurements express vi in my vi and I'd like to put the "window" and "number of averages" controls from the properties dialog on the front panel. However, there are not outputs on the express vi icon for these parameters. Can I place controls for these on the front panel somehow or do I always have to go into the block diagram and open the properties dialog to change the values?

The way to do this is to right click on the express VI and select Open Front Panel. This will convert it to a standard subVI. then go into the subVI and replace the Spectrum Averaging and Spectrum Window constants to front panel controls by right click on them. Right click the icon and select Show Connector. Wire the new controls to a free terminal on the connector. You may have to add additional terminals if there aren't any available to wire to the new controls.

Multiple tag fields in page properties dialog

Is there a way to have multiple tag fields in the page properties dialog and have them work with the default TagManager API? From what I've tried so far it looks like anything that is not in the root jcr:content node of a page or asset doesn't apply the cq:Taggable mixin to it. We are trying to spread out our structure of tags across fields so that authors don't have to navigate through multiple heirarchies. We are worries about that list becoming unwieldly to manage.
I'm not against doing some customiziation but it looks like the TagManager will only utilize fields named cq:tags in its query.

Hi,
According to your post, my understanding is that you want to add multiple editable fields in the page in SharePoint online 2013.
Here is a solution for your reference:
1. We can create a Custom List and add some fields in it.
2. Create a Datasheet View in this List.
3. Add this Custom List(as an app part) into the page you want.
4. Edit this App Part and set its view as Datasheet View.
If I misunderstand what you mean, please provide more details on your requirement(picture would be better).
Best Regards,
Dennis Guo
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

VI Properties dialog is slow

Has anyone experienced this with LV 8.5? I have a large project open, and when I try to pull up the "VI Properties" dialog box it takes between 10 to 15 seconds to open. It is a large DSC-based project (whether that has any relevance).
Thanks,
David Moerman

Hi Yi
I am currently using LV7.1.1f2 on three different machines, each with Daq 4.3 or 4.4. (The reason I am not using 8.5 is I am awaiting a graph bug fix). Each has WXP SP2 with latest updates. This slow opening of VI Properties dialog box has bedeviled me for years. Until today, I have just lived with it, getting frustrated each time. I have found that it appears randomly on different machines (I have used perhaps 15-20 with LV). Today I decided to see if anyone else has the same problem. Here are my findings:
1. Laptop (Dell M90, Intel dual core, 2 GB Ram) (See SysProps file, attached): It does not matter whether the CPU is idle or not, not what the size of the VI is. I created two empty VIs (A and B). Each time I rt clicked the icon and selected VI Properties, then timed it to see how long it took for the dialog box to appear. (I later I emptied the recycle bin - no change).
Test1
Open Vi A: Delay = 5 sec
Wait about 1 sec
Open Vi A: Delay = <1 sec
Wait about 1 sec
Open Vi A: Delay = <1 sec
Wait about 1 sec
Open Vi A: Delay = <1 sec
Wait about 1 sec
Open Vi A: Delay = 5 sec
Wait about 1 sec
Open Vi A: Delay = <1 sec
Wait about 1 sec
Open Vi A: Delay = <1 sec
Wait about 1 sec
Open Vi A: Delay = 5 sec
Test2
Open Vi A: Delay = 5 sec
Wait about 10 sec
Open Vi A: Delay = 5 sec
Wait about 10 sec
Open Vi A: Delay = 5 sec
Wait about 10 sec
Open Vi A: Delay = 5 sec
Wait about 10 sec
Open Vi A: Delay = 5 sec
Test3
Open Vi A: Delay = 5 sec
Wait about 1 sec
Open Vi B: Delay = <1 sec
Wait about 1 sec
Open Vi B: Delay = <1 sec
Wait about 1 sec
Open Vi B: Delay = <1 sec
Wait about 1 sec
Open Vi B: Delay = 5 sec
Wait about 1 sec
Open Vi A: Delay = <1 sec
Wait about 1 sec
Open Vi A: Delay = <1 sec
Wait about 1 sec
Open Vi A: Delay = 5 sec
Conclusions:
1. If one waits longer than say 5 sec between trying to open Vi Props, the delay is always present.
2. If one opens the VI props on same or another VI within a second or so, the delay disappears for a few times (2-4 maybe) then reappears.
2. Desktop PCs: Both AMD Dual Core 4200 XPs.
No delay in opening VI properties in either case. In one case, the PC was running a bunch of LV apps which were using 30% of the total CPU%. The VI Props Dialog box still opened instantly, many times in a row, or first time after a long delay.
Attachments:
SysInfo_TimTower_DellM90laptop.zip ‏77 KB

Import/Export Properties Dialog Box

I am trying to launch the import/export properties dialog box but the only item under the Tools menu is Customize. How can I get to the import/export properties dialog?
I am using TestStand 4.2 and have tried reinstalling.

Hi,
I don't know why you don't see it already but I have a suggestion...
I'm using 4.1 but maybe you can create a new menu item using settings similiar to mine.
Item Text Expression: ResStr("DATABASE_TOOL_MENU", "IMPORT_EXPORT_DESCRIPTION")
Enable Expression: PropertyExists("RunState.InitialSelection.SelectedFile") && GetNumElements( RunState.InitialSelection.SelectedSequences ) > 0 && CurrentUserHasPrivilege("Develop.EditSequenceFile
Sequence File: GenericImportExport.seq
C:\Program Files\National Instruments\TestStand 4.1.1\Components\Tools\GenericImportExport.seq
(replace your own version of TestStand)
Sequence: ImportExport
Hope this helps.

How do you get the text box text properties dialog box to appear on a MAC?

how do you get the text box text properties dialog box to appear in Adobe Reader XI on a MAC? I know windows is Ctrl-E but can't figure out what to hit for Mac.

Right-click the toolbar and you should find it there (including the short-cut, which is probably Cmd+E).

Step type properties dialog too small!

Hi!
Just have a look at the screenshot of the step properties dialog. It does not show everything I used to see in earlier versions of test stand. There are no buttons visible!
What to do?
ciao
weltaran
Attachments:
StepTypeDialog_too_small.png ‏47 KB

Na, i don't think that this is purely related to Windows 7. At least on my Windows 7 machine, it does not display the dialog as seen in the screenshot.
Therefore, we have to dig in what possible reasons could be.
The screenshot shows the step properties of a Tcl step from the NI example opened in the NI Sequence Editor in the type palette. weltaran states that it does appear for every step type there, but is limited to step property dialogs in the type palette (that's what i understood).
My first question, independend of above chapter: What happens, if you change screen resolution? Does it improve or worthen the issue?
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

10.1.3r3 - JAZN Data Properties dialog bug

JDev team,
The JAZN Data Properties dialog in 10.1.3r3 has a bug. Once you've defined your own realm, users and policies in a jazn-data.xml file, closing and returning to the dialog for the same file you cannot see the entries you previously made within the dialog.
Cheers,
CM.

Chris,
good catch, thanks.
Frank

Web Properties Dialog

Similar Messages

Maybe you are looking for