Web proxy server using servlet

Hello members,
I want to develop a web proxy server like this [http://www.webproxyserver.net|http://www.webproxyserver.net] using servlet. anyone of you have any idea how to this, kindly suggest me. Thanks

HttpProxyServlet's configuration properties are added as server init parameter in web.xml which one can configure at deployment time. Most of the properties have a default value which will take effect if it is not set in web.xml
Refer to http://e-docs.bea.com/wls/docs100/plugins/http_proxy.html#wp115201 for more details.

Similar Messages

Why doesn't Web Proxy Server use default route?

After downloading Sun Java Web Proxy Server, I notice that the path to retrieve URLs from the internet does not go out the default route.
However my pings, traceroutes, telnets, etc. to the same URLs do go out to the default route correctly.
I have tried with both SP5 and SP6.
Thanks

I went to about:cache. It says 0 Kib offline cache.
I went to the two links, but I can't understand what to do. I know I have to allow some storage in order for the Flash based cams to run. I have the one I use the most set to allow 100 KB but is says there is 0 being used.
I'm attaching a few screen captures. There are many sites listed below where the last one is cut off. I don't even know what some of them are. I don't understand what to do. Sorry.
EDIT. I may have found the area that is causing the problem. See last screenshot of Website Storage Settings panel. For some reason, that is now on 0. I don't remember changing it to that or ever seeing this section before. Should I move it to some other number?
Another EDIT: I did move that slider over in the last screenshot, and I now have the cache and Clear works again. So you helped me solve this problem that was causing FF to crash all the time, I think. Thank you!
But now that I've seen that list of places storing things, I'm worrried about the ones I've never heard of and don't remember visiting. Is it a good idea to click Delete all sites or am I over-reacting to all this malware scare? Maybe I picked them up from Pinterest. I do have Sophos Antivirus running, so I don't think I have a problem at this time.

Why doesn't Sun ONE Web Proxy Server support full replication?

Sun believes caching on-demand is a much more appropriate model for either the World Wide Web or an intranet. Common indexes should be distributed, but data can (and should) be stored wherever is most appropriate on the network. If Proxy Servers are deployed, there will be a 50 percent to 75 percent chance that the document will be cached locally and no chance of getting stale data.
Sun ONE Web Proxy Server uses sophisticated statistical analysis to store the documents most likely to be needed. It also manages document expiry and version control, and by default checks the home server every time a document is requested. Full replication like that performed by other softwares presumes that each document needs to be fully replicated on every server. (Imagine doing that on the Web!) This model limits the scalability of the infrastructure, and requires many more servers, more hardware, and more management complexity. More importantly, it increases the likelihood of getting stale data. A document checked in at one location may take a day or more to be fully replicated around the world.

If you have a support contract, get in touch with a support engineer. We've run into a bug related to following referrals in the "off-the-shelf" version of the proxy server. I believe there is a hotfix that solves the issue.

Web Proxy Server 3.6 with Administration Server using SSL connection

In your manual: Administrator�s Guide Sun� ONE Web Proxy Server Version 3.6 SP3 for UNIX you wrote:
You should also make the administrative connection a mandatory SSL connection
Instead of using http://servername:port_number
I need to use:
https://servername:port_number
How can I do that?
Thanx
Gian Mario

HI
To enable https for the admin,
Create a certifcate for the proxy admin
Next, From 'Admin Preferences', click on 'Encryption on/off'
From the 'Encryption on/off'; screen that appears, click on the 'on' radio button. Select the certficate from the alias list and click on OK to enable encryption for the cerficate you have installed for your admin server.
Now restart you admin server.
You wil now be able to connect to your admin using https
Thanks
Nagendra HK

Can i setup a secure reverse proxy using sun one web proxy server and windows 2000?

I've tried this on IPlanet Proxy 3.6 and, after reading the documentation, realized that SSL is not supported on the Windows platform. So I'm asking if it is supported using Sun One Web Proxy Server

Hi,
Yes, What you say is right.
"The NT and Windows 2000 versions of iPlanet Web Proxy Server 3.6 do not support SSL".
Sun One Web Proxy Server is as same as iPlanet webproxy server.
May be in future relase of proxy server SSL will be supported in Win2000.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

'-1' bytes in log file - iPlanet Web Proxy Server 3.6

I'm running iPlanet Web Proxy Server 3.6, and getting strange results in log file using extended format. Where the number of bytes should be (c1 - the content-length sent to the client by the proxy).
I regularly get a '-1' instead of the number of bytes. Anyone tell me where this is coming from and how to stop it?

Someone in the Web Proxy Server forum might. I guess you accidentally posted in the Web Server forum. However, if your question is time- or business-critical, you should probably contact Sun directly: http://www.sun.com/support

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

Web Proxy Server Load Balancing

I deployed Sun Jave Web Proxy Server 4.0 as a Reverse Proxy. I would also like to use it as a load balancer. As per the instructions, I configured the obj.conf file as shown below
Route fn="set-origin-server" server="https://xx.xx.xx.xx" server="https:yy.yy.yy.yy" sticky-cookie="JSESSIONID" sticky-param="jsessionid" route-hdr="Proxy-jroute" route-cookie="JROUTE" rewrite-host="true" rewrite-location="true" rewrite-content-location="true"
But, it is not doing load balancing. It always sends to the first server (xx.xx.xx.xx). I guess that is because I used mapping as follows:
NameTrans fn="reverse-map" from="https:xx.xx.xx.xx" to="https://server.net" rewrite-location="true" rewrite-content-location="true"
NameTrans fn="redirect" from="http://server" url="https://xx.xx.xx.xx"
NameTrans fn="map" from="https://server" to="https://xx.xx.xx.xx" rewrite-host="true" name="pa-server-farm1" NameTrans fn="map" from="/" to="https://xx.xx.xx.xx" rewrite-host="true" name="pa-server-farm1"PathCheck fn="url-check"ObjectType fn="block-ip"
ObjectType fn="cache-enable" cache-auth="1" cache-https="1" query-maxlen="0" min-size="0" Service fn="proxy-retrieve"
I don't understand how routing and mapping work togother. Any help in this regard is appreciated.

Motor,
the following is from the Web Proxy Sever Administration guide. Please, check the last paragraph for the explanation. Any how, the problem is simple. I am using the Proxy Server as the Reverse proxy. And at the same time, I would like to use two origin servers (for load balancing) instead of one. How do I make both load balancing and reverse proxy functions work together?
Thanks
To Create Regular or Reverse Mapping
Access the Server Manager, and click the URLs tab.
Click the Create Mapping link.
The Create Mapping page is displayed.
In the page that appears, provide the source prefix and source destination for the regular mapping,
for example,
Source prefix: http://proxy.site.com
Source destination: http://http.site.com/
Click OK.
Return to the page and create the reverse mapping, for example,
Reverse mapping:
Source prefix: http://http.site.com/
Source destination: http://proxy.site.com/
To make the change, click OK.
Once you click the OK button, the proxy server adds one or more additional mappings. To see the mappings, click the lView/Edit Mappings link. Additional mappings would be in the following format:
from: /
to: http://http.site.com/
These additional automatic mappings are for users who connect to the reverse proxy as a normal server. The first mapping is to catch users connecting to the reverse proxy as a regular proxy. The �/� mapping is added only if the user doesn't change the contents of the Map Source Prefix text box provided automatically by the Administration GUI. Depending on the setup, usually the second mapping is the only one required, but the extra mapping does not cause problems in the proxy.

How would a corporation deploy Sun ONE Web Proxy Server?

A corporation should deploy Sun ONE Web Proxy Server at the following key places:
* The Internet gateway: Sun ONE Web Proxy Server deployed just behind the firewall facilitates access to the Internet and reduces response times and communications expense.
* Major sub-network connections: Marketing, Sales, Product Development, Human Resources, and Finance departments might have their own subnetworks. An Sun ONE Web Proxy Server deployed at each subnet can reduce traffic on the corporate backbone.
* Remote offices that are disconnected from the internal network: Sun ONE Web Proxy Server can provide a quick mechanism for replicating content when necessary, providing better company integration and increasing network performance without large capital and communications expense.
* Internationally: Outside the United States, communications bandwidth is typically much more expensive, making Sun ONE Web Proxy Servers even more cost effective. Every international office can make use of an Sun ONE Web Proxy Server.
* Outside the firewall as a Web server substitute in reverse proxy configuration: This protects information on the secure Web server behind the firewall and offers load balancing via caching.

http://wwws.sun.com/software/download/products/3ef1fcb5.html
If u wait for a week or so, SP4 will also be there.
Maneesh

Socks services errors in web proxy server

Using SunOne web proxy server 3.6+sp1, the socks service frequently out of service. Sometime its process is still alive , but can't response the client request; sometime the process is gone! The following is the errors log:
[25/Oct/2002:11:18:06] 8269 debug: io_loop: killing tunnel after rollover, lastactivity == 1966619898,PR_IntervalNow says 2026622109
[25/Oct/2002:11:20:31] 8269 debug: io_loop: killing tunnel after rollover, lastactivity == 1981101717,PR_IntervalNow says 2041102282
[25/Oct/2002:11:20:48] 754 error: unknown request type 0x47 from 10.160.8.159:30 83
[25/Oct/2002:11:41:07] 14946 debug: ACCEPT RETURNED NULL! io_total = 63 dead =-1
Any infomation is welcome!

what's the software name of socks? how i can download it?
you mean it's not good?
And the following is the issue in detail:
The socks service frequently out of service. Sometime its process is still alive , but
can't response the client request; sometime the process is gone.It occurs once a
day, and after restart, its go away. And the last issue about must reconnect the gameroom
is gone now, and was identified as the network's problem.
mangus.conf:
#ServerRoot /iPlanet/proxy/proxy-proxy-proxy
ServerName proxy
ServerID proxy-proxy
Address 10.160.1.14
Port 8080
User root
LoadObjects obj.conf
RootObject default
ErrorLog /iPlanet/proxy/proxy-proxy-proxy/logs/errors
LDAPConnPool 5
SearchDepth 30
Dyngroups ON
SearchTimeLimit 30
BindTimeLimit 15
LdapCheckUp 30
CertificateChecking OFF
PidLog /iPlanet/proxy/proxy-proxy-proxy/logs/pid
MaxProcs 1024
ProcessLife 128
DNS on
Security off
Ciphers rc4,rc4export,+rc2,+rc2export,+des,+desede3
SSL3Ciphers
rsa_rc4_128_md5,rsa_3des_sha,+rsa_des_sha,+rsa_rc4_40_md5,+rsa_rc2_40
md5,-rsanull_md5
ACLFile /iPlanet/proxy/httpacl/generated.proxy-proxy-proxy.acl
obj.conf
# Netscape Communications Corporation - obj.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
Init funcs="icp-init,icp-route" shlib="/iPlanet/proxy/plugins/icp/icp.so" fn="load-
modules"
Init funcs="pa-init-proxy-array,pa-init-parent-array,pa-enforce-internal-routing,pa-set-
parent-route,pa-set-member-status"
shlib="/iPlanet/proxy/plugins/parray/parray.so" fn="load-modules"
Init fn="load-types" mime-types="mime.types"
Init access="/iPlanet/proxy/proxy-proxy-proxy/logs/access" format.access="%
Ses->client.ip% - %Req->vars.pauth-user% [%SYSDATE%] \"%Req->reqpb.proxy-
request%\" %Req->srvhdrs.clf-status% %Req->vars.p2c-cl%" fn="flex-init"
Init fn="init-proxy" timeout="300" timeout-2="15"
Init fn="init-dns-cache" status="on" dir="/tmp" semas="4" size="4096"
expire="28800"
Init fn="init-cache" status="on" ndirs="256" dir="/iPlanet/proxy/cache"
Init fn="init-partition" status="on" name="p1" dir="/iPlanet/proxy/cache/p1" max-
size="8000" min-avail="5"
Init status="on" dir="/iPlanet/proxy/cache/p2" name="p2" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p3" name="p3" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p4" name="p4" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p5" name="p5" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p6" name="p6" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p7" name="p7" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p8" name="p8" max-size="8000" min-
avail="5" fn="init-partition"
Init fn="init-urldb" status="on" dir="/iPlanet/proxy/cache/urldb"
Init fn="init-batch-update" status="off" dir="/tmp" conf-file="bu.conf"
Init status="on" dir="/tmp" hash-size="17191" table-size="85955" expire="3600"
fn="init-pauth-cache"
Init config_file="icp.conf" status="off" fn="icp-init"
Init set-status-fn="pa-set-member-status" file="/iPlanet/proxy/proxy-proxy-
proxy/config/parray.pat" status="off" fn="pa-init-proxy-array"
Init set-status-fn="pa-set-member-status" file="/iPlanet/proxy/proxy-proxy-
proxy/config/parent.pat" status="off" fn="pa-init-parent-array"
<Object name="default">
NameTrans fn="map" from="file:" to="ftp:" cont="yes"
NameTrans fn="pfx2dir" from="/ns-icons" dir="/iPlanet/proxy/ns-icons" name="file"
NameTrans fn="pac-map" from="/" to="/iPlanet/proxy/proxy-proxy-
proxy/pac/proxy.pac" name="file"
PathCheck fn="url-check"
PathCheck fn="check-acl" acl="proxy-proxy-proxy_formgen-READ-ACL_deny-
5619"
PathCheck fn="check-acl" acl="proxy-proxy-proxy_formgen-WRITE-ACL_deny-
5619"
Service fn="deny-service"
AddLog fn="flex-log" name="access" iponly="1"
AddLog fn="urldb-record"
</Object>
<Object name="file">
PathCheck fn="unix-uri-clean"
PathCheck fn="find-index" index-names="index.html"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service fn="send-file"
</Object>
<Object ppath="ftp://.*">
ObjectType fn="cache-enable"
ObjectType fn="cache-setting" max-uncheck="21600"
Service fn="proxy-retrieve"
</Object>
<Object ppath="http://.*">
ObjectType fn="cache-enable"
ObjectType fn="cache-setting" max-uncheck="7200" lm-factor="0.100"
Service fn="proxy-retrieve"
</Object>
<Object ppath="https://.*">
Service fn="proxy-retrieve"
</Object>
<Object ppath="gopher://.*">
ObjectType fn="cache-enable"
ObjectType fn="cache-setting" max-uncheck="14400"
Service fn="proxy-retrieve"
</Object>
<Object ppath="connect://.*:443">
Service fn="connect" method="CONNECT"
</Object>
<Object ppath="connect://.*:563">
Service fn="connect" method="CONNECT"
</Object>
socks5.conf
# Netscape Communications Corporation - socks5.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
auth 10.160.0.0/255.255.224.0 - -
auth - - u
permit u,- - - - - - -
set SOCKS5_BINDPORT 1080
set SOCKS5_LOGFILE /iPlanet/proxy/proxy-proxy-proxy/logs/socks5.log
set SOCKS5_DEBUG 1
set SOCKS5_WORKERS 100
set SOCKS5_ACCEPTS 5
set SOCKS5_NOIDENT
set SOCKS5_NOREVERSEMAP
socks5.log
[19/Nov/2002:11:31:14] 830 debug: request from 10.162.169.176:2305
[19/Nov/2002:11:31:15] 830 debug: auth: userpass
[19/Nov/2002:11:31:15] 830 debug: authentication type 2 successful for hs
[19/Nov/2002:11:31:15] 830 debug: request 1 to jason314.3322.org:21
[19/Nov/2002:11:31:15] 830 request: hs 5 connect: ok 10.162.169.176:2305 ->
jason314.3322.org:21
[19/Nov/2002:11:31:15] 831 debug: request from 10.162.169.176:2306
[19/Nov/2002:11:31:15] 831 debug: auth: userpass
[19/Nov/2002:11:31:15] 831 debug: authentication type 2 successful for hs
[19/Nov/2002:11:31:15] 831 debug: request 1 to jason314.3322.org:21
[19/Nov/2002:11:31:15] 831 request: hs 5 connect: ok 10.162.169.176:2306 ->
jason314.3322.org:21
access
10.160.115.222 - scy-tl [19/Nov/2002:11:32:33 +0800] "GET
http://www.eefoo.com/c
ommunity/images/bbs0gg.gif HTTP/1.0" 200 146
10.160.115.79 - whh-tl [19/Nov/2002:11:32:33 +0800] "GET
http://fayhoo.com/image
/blank HTTP/1.0" 404 276
10.160.19.151 - lhb [19/Nov/2002:11:32:33 +0800] "POST HTTP://rich-bj.stockstar.
com:8892/1 HTTP/1.0" 200 81
10.160.160.130 - gsp-ld [19/Nov/2002:11:32:33 +0800] "GET
http://images.sohu.com
/cs/button/sony/12060.swf?clickthru=http://goto.sohu.com/goto.php3?code=sony-
sh2
40-fr12050 HTTP/1.0" 200 8302
10.160.23.141 - wyn [19/Nov/2002:11:32:33 +0800] "POST HTTP://rich-
bj.stockstar.
com:8891/1 HTTP/1.0" 200 81
10.161.159.40 - - [19/Nov/2002:11:32:33 +0800] "PUT http://204.177.92.204/w/getc
lientid?srv=china_sex&ver=0,0,0,62 HTTP/1.0" 407 271
10.160.17.108 - weizc [19/Nov/2002:11:32:33 +0800] "GET
http://www.guosen.com/cg
i-bin/RHStockGraphics.dll?GetTLine?code=10000001&cx=150&cy=70&am=0
HTTP/1.0" 200
1004
10.161.130.3 - czy-ykj [19/Nov/2002:11:32:34 +0800] "GET http://ad4.sina.com.cn/
btn/dbtel-tlhp.swf HTTP/1.0" 304 -
10.161.159.40 - - [19/Nov/2002:11:32:34 +0800] "PUT http://204.177.92.204/w/getc
lientid?srv=china_sex&ver=0,0,0,62 HTTP/1.0" 407 271
errors
[19/Nov/2002:11:33:13] failure: for host 10.160.80.148 trying to GET http://myjh
xp.com/bbs/forums.cgi?forum=4, retrieve-exit-routine reports: proxy retrieve fai
led: Proxy server's network connection was refused by the server: myjhxp.com.
The server may not be accepting connections or may be busy. Try connecting
agai
n later.
[19/Nov/2002:11:33:13] warning: last-modified in future (not caching): Tue Nov 1
9 03:51:01 2002
[19/Nov/2002:11:33:13] failure: for host 10.160.80.148 trying to GET http://myjh
xp.com/bbs/forums.cgi?forum=4, retrieve-exit-routine reports: proxy retrieve fai
led: Proxy server's network connection was refused by the server: myjhxp.com.
The server may not be accepting connections or may be busy. Try connecting
agai
n later.
[19/Nov/2002:11:33:13] failure: for host 10.162.101.73 trying to GET ftp://202.1
15.144.37/software/special/WinPE-9down.rar, retrieve-exit-routine reports: proxy
retrieve failed: Proxy server's network connection was refused by the server:
202.115.144.37. The server may not be accepting connections or may be busy. Tr
y connecting again later.
[19/Nov/2002:11:33:13] warning: last-modified in future (not caching): Tue Nov 1
9 18:21:00 2002
[19/Nov/2002:11:33:13] warning: last-modified in future (not caching): Tue Nov 1
9 03:51:01 2002
The logs is so large, i only can give you some of them typically.
and the types of log's record when problem occurs i have supplied to you, also i
pasted here
[25/Oct/2002:11:18:06] 8269 debug: io_loop: killing tunnel after rollover, lastactivity
== 1966619898,PR_IntervalNow says 2026622109
[25/Oct/2002:11:20:31] 8269 debug: io_loop: killing tunnel after rollover, lastactivity
== 1981101717,PR_IntervalNow says 2041102282
[25/Oct/2002:11:20:48] 754 error: unknown request type 0x47 from
10.160.8.159:30 83
[25/Oct/2002:11:41:07] 14946 debug: ACCEPT RETURNED NULL! io_total = 63
dead =-1
------------------------------------------------------------------

Configuring authentication in web proxy server

We are using iPlanet Web Proxy Server 3.6 on WindowsNT 4.0
After installation of iplanet web proxy server 3.6, and making a request for internet access through browser it does not ask for authentication. There is no pop up window received for user name password to authenticate users.
Upon creating a group and then adding a few members (user1,user2,user3 etc.) to it, we configure rules to restrict user access to internet in the Global settings tab. After saving all the configuration and taking a restart of the proxy server, when we try to log on to internet from a
different client machine (browser) using an existing user id and password, it does not prompt us for user name and password even though the option "restrict access" in global setting is properly set.
My first question......
=>DOES iPlanet Web Proxy allow for such authentication pop up ??
=> If Yes, then kindly let us know where we have gone wrong in configuring the server.
We are NOT using any webserver or LDAP to authenticate users. No SSL is enabled.
Please suggest.

We are using iPlanet Web Proxy Server 3.6 on WindowsNT 4.0
After installation of iplanet web proxy server 3.6, and making a request for internet access through browser it does not ask for authentication. There is no pop up window received for user name password to authenticate users.
Upon creating a group and then adding a few members (user1,user2,user3 etc.) to it, we configure rules to restrict user access to internet in the Global settings tab. After saving all the configuration and taking a restart of the proxy server, when we try to log on to internet from a
different client machine (browser) using an existing user id and password, it does not prompt us for user name and password even though the option "restrict access" in global setting is properly set.
My first question......
=>DOES iPlanet Web Proxy allow for such authentication pop up ??
=> If Yes, then kindly let us know where we have gone wrong in configuring the server.
We are NOT using any webserver or LDAP to authenticate users. No SSL is enabled.
Please suggest.

Does Sun ONE Web Proxy Server have built-in log analysis tools? What kind o

Sun ONE Web Proxy Server automatically logs all requests using either the common log-file format or an extended log-file format. The extended log-file format includes the referrer field and user agent. You can also create your own log file format by selecting which HTTP fields you would like to log. A built-in log analysis program includes reports such as total number of requests, total bytes transfered, most commmon URLs requested, most common IP addresses making requests, performance during peak periods, cache hit rates, and estimated response time reduction. The items logged and the analysis program are completely configurable using the server manager's HTML form.

Sun Java System Web Server is a web server; it serves web pages to web clients. Sun Java System Web Proxy Server, on the other hand, is a web proxy server; it routes requests/responses between web servers and web clients.
You can configure Web Server to act as a simple reverse proxy by installing the Web Server 6.1 Reverse Proxy Plugin. This doesn't provide any of the forward proxy or caching proxy functionality found in Web Proxy Server.
Both Web Server 6.1 and Web Proxy Server 4.0 are supported on Solaris 10.

Oracle iPlanet Web Proxy Server 4.0.14 not getting started.

bash-3.00# ./start
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
Oracle iPlanet Proxy Server 4.0.14 B06/08/2010 05:46
failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /export/home/Oracle_Proxy/bin/proxy/lib/libj2eeplugin.so failed (ld.so.1: proxyd: fatal: libjvm.so: open failed: No such file or directory)
bash-3.00# uname -r
5.10
bash-3.00# uname -a
SunOS sunfire-v240 5.10 Generic_118822-25 sun4u sparc SUNW,Sun-Fire-V240
bash-3.00#
The web proxy server version is 4.0.14 and the package i used is "Oracle-iPlanet-Web-Proxy-Server-4.0.14-sparc.zip"
Please help me. If any other information is needed, please let me know.

Your proxy instance should start. The error you are seeing should only be for the admin server. Add the location of where your jvm.so is located to the LD_LIBRARY_PATH. The jvm.so is located under the JDK directory.

Migrate certificate 3.x to Oracle iPlanet Web Proxy Server 4.0.20

Hi
I try to migrate from Sun iPlanet Web Proxy Server(SPWPS) 3.6 to Oracle iPlanet Web Proxy Server(OPWPS) 4.0.20 and I have some problem.
I have an instance in SPWPS-3.6 with SSL certificate, when I migrate it to OPWPS-4.0.20 using the admin interface, the certificate
is not migrate with this error message :
Migrating Keys and Certificates...
[Error] The password entered for the key is not valid
Assimilation failed.
But I am sure to enter the right password.
After that I manage the new instance in administration interface, and in Security Panel, there is a choice to "Migrate 3.x certificate"
I try this, but I get this error message
Incorrect Usage
The password entered is not valide
Can somebody help me to resolve this problem ?
Thanks in advance.

Your proxy instance should start. The error you are seeing should only be for the admin server. Add the location of where your jvm.so is located to the LD_LIBRARY_PATH. The jvm.so is located under the JDK directory.

IPlanet Sun ONE Web Proxy Server 3.6 SP6 terminating

I have a problem with my proxy server server.
I use iPlanet Sun ONE Web Proxy Server 3.6 SP6
It is terminating and the service is restarting. This happens about 10-15 times a day. The message I get from the log is :
[22/Mar/2005:09:29:30] info: server terminating... each time it terminates.
I know for sure that this is no hardware issue (as I have changed the hard disk recently). My OS is win2000 server SP4 + all released patches from MS.
Also I have reinstalled the OS several times (clean install after format) and I got the same result.
Also I tried to use the proxy with/without LDAP server for authentication - the same.
Any suggestions/recommendations are mostly welcome.
Thanks in advance,
Kaloyan

Dear Kaloyan,
Migration to another proxy (e.g. ISA) seems to be quickest solution for your problem, as WebProxy doesn't work well on w2k platform.
Vladimir
P.S. Regards to Delyan :)

Web proxy server using servlet

Similar Messages

Maybe you are looking for