Web publish publishing OLD file???

This is hard to explain because it seems to defy logic.
I made an authorware project. During the creation process, I
published it for the web regularly to see the changes. Great! No
prob! However, when I finally made the last changes and tweaks,
when I published it, it keeps publishing the version that existed
BEFORE I made the most recent changes. When I play it in the
authorware environment, it is OK. When I preview the webpage after
publishing, I see the OLD version.
I unlinked the file settings. Published again. It publishes
the old file.
I "saved as" another file. Published again. It published the
OLD file.
I even DELETED the original file. It publishes the DELETED
version.
I published it on a different computer!!!! You guessed it! It
published a version that doesn't even exist anymore!
I'm obviously missing something...a "cache" or something that
I don't know about?....Can anyone help me?
Jeff

Did you by any chance remove the local option (Package As)?
If you packaged
the file with the local option then it would have created an
a7r file. If
you remove that package option then it will keep using the
same a7r file as
the source for packaging the web part (IIRC). Reselect the
local Package As
option to make it create a new a7r each time you package or
you can find
where the a7r file is that it's using to package and delete
that. This might
have been corrected in 7.0.2 but I'm not sure.
HTH,
Mike Baker
Adobe Community Expert
[email protected]
"JeffinTaiwan" <[email protected]> wrote in
message
news:eo44kj$co5$[email protected]..
> This is hard to explain because it seems to defy logic.
>
> I made an authorware project. During the creation
process, I published it
for
> the web regularly to see the changes. Great! No prob!
However, when I
finally
> made the last changes and tweaks, when I published it,
it keeps publishing
the
> version that existed BEFORE I made the most recent
changes. When I play it
in
> the authorware environment, it is OK. When I preview the
webpage after
> publishing, I see the OLD version.
>
> I unlinked the file settings. Published again. It
publishes the old file.
>
> I "saved as" another file. Published again. It published
the OLD file.
>
> I even DELETED the original file. It publishes the
DELETED version.
>
> I published it on a different computer!!!! You guessed
it! It published a
> version that doesn't even exist anymore!
>
> I'm obviously missing something...a "cache" or something
that I don't
know
> about?....Can anyone help me?
>
> Jeff
>

Similar Messages

.Mac not updating when publish modified iWed file

Hi, when I first published my iWeb file to .Mac, it worked. Then I edited the iWeb file and republished, waited a few days, and my .Mac site is still showing the old original iWeb file.
- I tried republishing several times (publish to .Mac and publish all to .Mac)
- I also refreshed the page a bunch of times in my browser
- I also emptied the browser cache
Any ideas?
thanks!
Rob

the actual website is www.uechi-ryu-vancouver.com
This url is being forwarded to
http://web.mac.com/robert.kolenc/iWeb/Site/Welcome.html
which is a site created by iWeb 1. You should change the forwarding to
http://web.mac.com/robert.kolenc
so it will go to your site created by iWeb 2.

Authentication error while consuming web service published in SR of CE 7.1

Hi,
I am having this error while trying to consume a web service published in local services registry. Authentication level is set as Basic in the web service and in end point. I am receiving this error in security log files.
Message:Authentication for web service ServicesRegistrySiService, configuration ServicesRegistrySiPort using security policy sap.com/tcesiuddisrws~earServicesRegistrySiServiceServicesRegistrySiPort*ws failed: Login failed.. (See SAP Note 880896 for further info).
Category: /System/Security/WS/Authentication
Location: com.sap.engine.services.wssec.authentication.authenticate
Application: sap.com/tcesiuddisrws~ear
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\system\security_00.log
Correlator ID: 33747500000034965
Argument Objects:
Arguments:
DSR Component:
DSR Transaction: 72b226c009ed11dd9a3e000c29c818ce
DSR User:
Message Code:
Session: 4196
Transaction:
User: Guest
Host: ########
System: ###
Instance: J00
Node: server0
following is the code in a C# .Net 2.0 from where the service is called.
            CnarService srv = new CnarService();
            NetworkCredential ic = new NetworkCredential("user", "password");
            CredentialCache cache = new CredentialCache();
            srv.UseDefaultCredentials = false;
            srv.PreAuthenticate = true;
            srv.Credentials = ic;
            try
                srv.Timeout = 600;
                cnarobject cnObj = srv.GetObject("1");
                fnameTextBox.Text = cnObj.firstname;
                lnameTextBox.Text = cnObj.lastname;
                mnameTextBox.Text = cnObj.middlename;
            catch (WebException wex)
                MessageBox.Show(wex.Message + wex.Response + wex.StackTrace);
I tried to find the SAP Note 880896 but note doesn't exists. I am receiving similar error while trying to connect Enterprise Services explorer for .Net
Please help.
Regards
Monty

Hi,
maybe you should see the settings for the ServicesRegistrySiService too. Under nwa->SOA.
I am not sure, but the error seems like not able to use the ServicesRegistrySiPort, which is to be authenticated against.
It is then used for retrieval of web services and publishing to the registry... i suppose.
I am not sure though.
Best regards,
Vera

Web services Publisher Error

Hello Experts,
I am ruuning down with an issue in Web I - web services publishing. When i tried to Publish the report as Web services Url, it says Connection time out. I tried to Add host in manage servers area (which is blank ), again it says "connection timed out"
Detailed error : HTTP transport error java.net.connection exception: connection timed out: connect
I looked in to web services deployment using the link webserver:port/dswsbobje. the axis2 home page opened up and all the services are active. However, when i looked into publish service, The SOAP address is showing a different IP.
Can someone let me me know how to change the SOAP address, which file to access? i can see dews.properties file has correct cms name.
Regards
Karthik

"C:\\PubHome_1\\xmlp\\XMLP\\DemoFiles
test.xml");
"C:\\PubHome_1\\xmlp\\XMLP\\DemoFilestest.xml");
The line return on this forum removed the double backslash from what you posted as the path in your config file? (looks like it does when I tried it)

Published my iWeb files to MobileMe but can't get to domain

I've finally been able to publish my iWeb files to MobileMe (after 2 days of trying -- a message kept appearing that said "iWeb couldn’t publish to MobileMe. The MobileMe servers are busy. Please try again in a few minutes."), but now when I try to go to my domain name (www.julie-harrison.com) it automatically redirects to "www.web.me.com".
Help!
juleslarosa

Well, have you followed all the instructions about linking your domain name to MobileMe?
Have you entered your domain name in your MobileMe personal domain name settings? If not, then go and do this.
You then need to go to your domain name registrar and forward your domain name to web.me.com, by going to the DNS settings and setting up a new CNAME forwarding. Have you done this? If not, then go and do it.
You need to do all these things for your domain name to work.
By the way, it is web.me.com. If you keep typing www.me.com, then no it won't work.
Your url will always be http://web.me.com/username/sitename.

Robo Help 9 Web Help Publish Problem

I am trialling V9 of RoboHelp and when I am publishing to Web Help all I get is the skin with no data. I am publishing to my file system. Can anyone help? Thanks

Hi,
Are you using Chrome? Chrome doesn't support locally installed webhelp because of a security restriction. There is a workaround. See snippet 130 on http://www.grainge.org/pages/snippets/snippets.htm.
Greet,
Willam

How to generate & publish webhelp html files in different folder than default folder

Hi All,
I am new to robo help. I have a requirement to generate & publish webhelp html files in a different folder than default folder.
Could anyone please tell me the steps to change the folder
Thanks
Rashmi

You change the generate folder and filename in the first field on the first page of the wizard. It must be a folder on your hard disk.
You change the publish folder in the last page of the wizard. Anywhere you like.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How can I publish an ics file to a remote server from my calendar server?

I am running Lion Server and have Calendar Service up and running. I have an account with a couple of calendars, one of which I'd like to publish to a remote server, as an .ics file.
From an iCal client it is possible to publish local calendars, but not remote calendars (for which the only option seems to be to 'Share').
How can I can I publish an ics file to a remote server? Programatically, if necessary.

I have this working now.
curl -s --digest -u username:password -o calendar.ics http://hostname:8008/calendars/users/username/calendar/
generates the .ics file, and a combination of cadaver (from webdav.org) and an expect script upload hourly (via cron) to the remote server:
set timeout 60
spawn /usr/local/bin/cadaver
expect "dav"
send "open https://remotehost/path/\r"
expect "Do you wish to accept the certificate? (y/n)"
send "y\r"
expect "dav"
send "put calendar.ics\r"
expect "dav"
send "close\r"
expect "dav"
send "quit\r"

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup. Stopped, disconnected and the project exported!

Help with Publishing to a File - Photo Albums don't appear

I published to a file. I tested it and it looks good. I burned the folder to a CD in order to view it on another computer - specifically a PC. My webpages look right, but the photo albums don't appear. I can manually open the folders on the CD and verify that the photo jpg files are there. Any ideas? I am using iWeb 2.0.2.

Are you transferring the index.html file along with the website folder and double clicking the index file to launch the site in the PC browser?

Does the DPS publishes only for tablets? can I publish my indesign file to html only using DPS?

Does the Digital Publishing Suite publishes only for tablets? can I publish my indesign file to html only using DPS?

DPS will not do what you want and neither with anything else without at
least some work.
HTML out of InDesign is for content only, not layout. There is a new
product out there you can try, however:
http://ajarproductions.com/pages/products/in5/
Bob

Web Catalog Publishing using MDM RPCM scenario

Hi Experts
Is it possible to do web catalog publishing using MDM Publisher or Publisher APIs? if yes, where can i get the information on how to proceed with it?
I came across this[thread|Re: Web Catalog Publishing]
where Markus has stated that web catalog publishing is possible with java APIs and SAP is having plans to include that functionality in Publisher tool as well, in its future releases.
I couldnu2019t find any straightforward answer for my question either in MDM Java docs or in Publisher guide.
Thanks in advance
SwarnaDeepika

Thank you Markus for the prompt reply.
The link was very helpful. The line
To build dynamic Web sites with complex MDM data layouts
was what i was looking for.
So using the publishing APIs MDM data can be sent through to a web site which acts as a online catalog, can you please confirm?
Can these APIs be used to expose the catalog using enterprise portal as well, instead of a normal website (just like how its done in SRM-MDM catalog)?
P.S: Kindly bear with me, if my questions are silly. An expert's opinion is all i need
Regards
SwarnaDeepika

Published with audio files, AAC Okay, MP3 'No Go'

Hello all.
I've put a couple of music, excerpts on my iWeb website; I discovered something after I published, one audio file is AAC and it loads properly on Safari on all my 3 macs (iMac at home, Office G5 via office intranet and MacBook in office with cable modem), but the audio file with MP3 has just the 'QuickTime' logo on it, you can't even play the music.
Which is "funny" because I thought with Safari and QuickTime, should be able to play all formats of music? At least AAC and MP3? The music files are all encoded or re-encoded respectively via iTunes.
I decided to use MP3 instead is I am afraid some browsers or computers (older maybe?) will not be able to play AAC files?
Thanks and cheers

iWeb writes page code to use the QuickTime browser plug-in so it wouldn't matter what audio format was used (as long as QuickTime supports it).
The trouble is a "Fast Start" problem with your .mp3 files.
Most exports from iTunes uses the newer .m4v or .m4a file extension and they should fast start (play as the file continues to download). You should consider exporting your .mp3 files to AAC (using the same settings currently used in them).
Your page visitors would need to have QuickTime installed no matter what format you used so trying to "help" them by using .mp3 files is lost in the iWeb page coding.
You'll also realize a file size savings on most of your AAC conversions versus using MPEG-1 Layer 3 format. These smaller file sizes help speed up your download.

How do I publish Android APK files from CS5?

As far as I can understand you need three things to be able to publish Android APK files from CS5:
1. Air 2.5 or greater (I've downloaded and installed 2.7 beta)
2. Android SDK (I've downloaded and installed)
3. Flash CS5 Android Extension (NOT AVAILABLE ANYMORE)
That's right, the last thing you need is no longer available because Adobe is rolling it into the next Flash version. So because I didn't get in on the prerelease with the extension...I'm just out of luck? That can't be right. How do you create APK files from CS5 when you can't get the extension? All of the tutorials out there for creating Android content from CS5 use this simple extension that seems to make everything so easy. What is Adobe's answer for creating APKs out of CS5 if you weren't part of the prerelease? They don't have the extension available anymore so there must be a way. Any help would be greatly appreciated.

You must use the Android extension to get the menu "AIR for Android", for you and das please find the below link:
http://www.mediafire.com/?edyam3lpjuma91c
Also check your private message.

I keep getting this error when I publish the SWF file.

I keep getting this error when I publish my SWF file.
Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts" setting. Use the Text > Font Embedding command to embed fonts.
ReferenceError: Error #1065: Variable TLFTextField is not defined.
And these compiled errors
Symbol 'Symbol 6', Layer 'Layer 1', Frame 1
Warning: The instance name 'staff' is declared on an object of type fl.text.TLFTextField but there is a conflicting use of the instance name 'staff' on an object of type flash.display.InteractiveObject.
Scene 1, Layer 'action', Frame 1, Line 7
1061: Call to a possibly undefined method gotoAndPlay through a reference with static type fl.motion:AnimatorFactory.
Scene 1, Layer 'action', Frame 1, Line 3
1061: Call to a possibly undefined method addEventListener through a reference with static type fl.motion:AnimatorFactory.
This is the only action script 3.0 script that I wrote.
import flash.events.MouseEvent;
skipbtn.addEventListener(MouseEvent.CLICK, btnClick);
function btnClick (event:MouseEvent):void{
skipbtn.gotoAndPlay("home");

the first line is a warning, not an error.
and you have more actionscript than you think. open the movie explorer panel and toggle the actionscript only button to find all the actionsript in your fla.

Web publish publishing OLD file???

Similar Messages

Maybe you are looking for