Web Redirect is not working
Hello,
We configured the web authentication in wlc 5508with ISE for the guest traffic. When client tries to connect it redirects to the different URL. That means the specified URL (that is default redirection page of ISE) 'https://<ISE IP>:8443/guestportal/portal.jsp' but client is getting redirected to
'https://<ISE>:8443/guestportal/login.action?switch_url=https://<virtual IP>/login.html&wlan...'. And finally page cannot be displayed now error message i am getting.
Why it happens..? Any quick help would be really appreciated
Moreover i have doubts on the below points.
1) Should both the Anchor and the foriegn controllers be configured for web auth security or only anchor ..?
2) When external web redirection, the client has to get the DNS resolved entry for the Specified URL or WLC knows to take it to the external web page..?
3) Any special configuration has to be done on ISE?
Thanks for your time
KVS
Message was edited by: Prasan Venky
Hello,
How to Make an External (Local) Web Authentication Work with an External Page
As already briefly explained, the utilization of an external WebAuth server is just an external repository for the login page. The user credentials are still authenticated by the WLC. The external web server only allows you to use a special or different login page. Here are the steps performed for an external WebAuth:
The client (end user) opens a web browser and enters a URL.
If the client is not authenticated and external web authentication is used, the WLC redirects the user to the external web server URL. In other words, the WLC sends an HTTP redirect to the client with the website's spoofed IP address and points to the external server IP address. The external web authentication login URL is appended with parameters such as the AP_Mac_Address, the client_url (www.website.com), and the action_URL that the customer needs to contact the switch web server.
The external web server URL sends the user to a login page. Then the user can use a pre-authentication access control list (ACL) in order to access the server. The ACL is only needed for the Wireless LAN Controller 2000 series.
The login page takes the user credentials input and sends the request back to the action_URL, such as http://1.1.1.1/login.html, of the WLC web server. This is provided as an input parameter to the customer redirect URL, where 1.1.1.1 is the virtual interface address on the switch.
The WLC web server submits the username and password for authentication.
The WLC initiates the RADIUS server request or uses the local database on the WLC, and then authenticates the user.
If authentication is successful, the WLC web server either forwards the user to the configured redirect URL or to the URL the client entered.
If authentication fails, then the WLC web server redirects the user back to the customer login URL.
Note: If the access points (APs) are in FlexConnect mode, a preauth ACL is irrelevant. Flex ACLs can be used to allow access to the web server for clients that have not been authenticated.
For more details, please refer to the following:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080bf7d89.shtml#redirect
Similar Messages
-
WSUS not working completely, no MMC connect, all web services are not working
Hello all,
I have a problem not sure what causing it or what is the source of it as I am not into WSUS that much...
THe status is as follows:
I have 1 server 2008 sp2 RTM x64, I had WSUS 3.0 SP2 on it since a while, it was working fine until a week ago, when I started receiving the below messages in the event viewer
I have spent too much time trying to trace or troubleshoot this issue, but all I got was to check the registry and check permissions on the temp folder and other folders, I have done complete removal with the database for the old WSUS and reinstalled it
again but I got the same problem
Nothing strange and no problems happened on the server perior to this issue, it just happened...
Any help will be appreciated
Regards
============== MSG 1 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:52:54 PM
Event ID: 7053
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
<head>
<title>Security Exception</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Security Exception</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact
your system administrator or change the application's trust level in the configuration file.
<br><br>
<b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
<b>Source Error:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
</td>
</tr>
</table>
<br>
<b>Stack Trace:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
ASP.global_asax..ctor() +0
</pre></code>
</td>
</tr>
</table>
<br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
</font>
</body>
</html>
<!--
[SecurityException]: That assembly does not allow partially trusted callers.
at ASP.global_asax..ctor()
[TargetInvocationException]: Exception has been thrown by the target of an invocation.
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context)
at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
[HttpException]: Exception has been thrown by the target of an invocation.
at System.Web.HttpRuntime.FirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
-->
Source
Microsoft.UpdateServices.Administration
Stack Trace:
at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">7053</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:52:54.000Z" />
<EventRecordID>884368</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
<head>
<title>Security Exception</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Security Exception</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission
please contact your system administrator or change the application's trust level in the configuration file.
<br><br>
<b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
<b>Source Error:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
</td>
</tr>
</table>
<br>
<b>Stack Trace:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
ASP.global_asax..ctor() +0
</pre></code>
</td>
</tr>
</table>
<br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
</font>
</body>
</html>
<!--
[SecurityException]: That assembly does not allow partially trusted callers.
at ASP.global_asax..ctor()
[TargetInvocationException]: Exception has been thrown by the target of an invocation.
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context)
at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
[HttpException]: Exception has been thrown by the target of an invocation.
at System.Web.HttpRuntime.FirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
-->
Source
Microsoft.UpdateServices.Administration
Stack Trace:
at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()</Data>
</EventData>
</Event>
============== MSG 2 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 13051
Task Category: 6
Level: Warning
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
No client computers have ever contacted the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">13051</EventID>
<Level>3</Level>
<Task>6</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884373</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>No client computers have ever contacted the server.</Data>
</EventData>
</Event>
============== MSG 3 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12002
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The Reporting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12002</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884374</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The Reporting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 4 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12012
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The API Remoting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12012</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884375</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The API Remoting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 5 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12032
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The Server Synchronization Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12032</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884376</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The Server Synchronization Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 6 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12022
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The Client Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12022</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884377</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The Client Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 7 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12042
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The SimpleAuth Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12042</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884378</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The SimpleAuth Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 8 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12052
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The DSS Authentication Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12052</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884379</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOAMIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The DSS Authentication Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 9 ==============
Log Name: Application
Source: ASP.NET 2.0.50727.0
Date: 9/21/2011 1:53:09 PM
Event ID: 1314
Task Category: Web Event
Level: Information
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
Event code: 4010
Event message: An unhandled security exception has occurred.
Event time: 9/21/2011 1:53:09 PM
Event time (UTC): 9/21/2011 10:53:09 AM
Event ID: 11b96ca285fa46d2a05d38e2e9b168af
Event sequence: 1
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820
Trust level: High
Application Virtual Path: /ApiRemoting30
Application Path: C:\Program Files\Update Services\WebServices\ApiRemoting30\
Machine name: APP-SVR
Process information:
Process ID: 8332
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Request information:
Request URL:
http://app-svr:8530/ApiRemoting30/WebService.asmx
Request path: /ApiRemoting30/WebService.asmx
User host address: 192.168.5.22
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITY\NETWORK SERVICE
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ASP.NET 2.0.50727.0" />
<EventID Qualifiers="16384">1314</EventID>
<Level>4</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:09.000Z" />
<EventRecordID>884380</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>4010</Data>
<Data>An unhandled security exception has occurred.</Data>
<Data>9/21/2011 1:53:09 PM</Data>
<Data>9/21/2011 10:53:09 AM</Data>
<Data>11b96ca285fa46d2a05d38e2e9b168af</Data>
<Data>1</Data>
<Data>1</Data>
<Data>0</Data>
<Data>/LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820</Data>
<Data>High</Data>
<Data>/ApiRemoting30</Data>
<Data>C:\Program Files\Update Services\WebServices\ApiRemoting30\</Data>
<Data>APP-SVR</Data>
<Data>
</Data>
<Data>8332</Data>
<Data>w3wp.exe</Data>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data>http://app-svr:8530/ApiRemoting30/WebService.asmx</Data>
<Data>/ApiRemoting30/WebService.asmx</Data>
<Data>192.168.5.22</Data>
<Data>
</Data>
<Data>False</Data>
<Data>
</Data>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
</EventData>
</Event>
Saleh RamadanSo, in reality, this issue has nothing at all to do with "it was working; now it is not", because you've destroyed all of the evidence that would exist in a "was working; now is not" scenario. What we really have here is a NEW installation that has failed.
So, from the perspective of a NEW installation that is not working...
Are there any other roles, features, services, or applications installed on this server?
Did you install the Web Server Role exactly as described in the documentation?
Did you install the WSUS Role exactly as described in the documentation?
Were there any other roles, features, services, or applications installed onto this server
after your original (working) installation of WSUS?
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2011)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com
Oh, well, I have red and followed the documentation exactly step-by-step on the technet library, and I can guarantee you nothing went wrong because this is not my first installation for it
When I told you about the old damaged installation and the new installation which is also failed and showed me the same symptoms as the old one, I was sure that nothing wrong with the WSUS itself, but rather it is something wrong with the environment
Answering to your above questions, the answer for all is that: that server is only used for WSUS, nothing more
Anyway, I have managed to restore the service thanks to your previous reply where you point to the CONFIG folder inside the NET framework folder, I checked the files in there, some were changed to the date I think has stopped the service, so I repaired the
NET framework 2, and restarted
It is working fine now and syncing with the update server
Saleh Ramadan -
Help, web cam is not working properly with win vista
Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject editedre-install drivers and try again. ( also easy capture )
-
12002 The Reporting Web Service is not working.
Hi :)
I have WSUS on Windows Server 2012 std. with Internal Database. Today I've installed 7 updates from patch tuesday and after restart I've got
error 12002 The Reporting Web Service is not working
I can see now that updatet clients can not report their status anymore :(
What's up ? Any suggestion ?
Best regards
NenadHi,
I would start by verifying that the /ReportingWebService resource is properly configured in IIS.
Correct configurations can be found in the WSUS Technical Reference Guide: IIS
Settings for WSUS 3.0 SP2 Web Services.
Also,Under ReportingWebService
Made sure all were set to disabled except for Anonymous Authentication
Anonymous Authentication Enabled
ASP .NET Impersonation Disabled
Basic Authentication Disabled
Forms Authentication Disabled
Windows Authentication Disabled
Regards,
Clarence
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
My integrated web cam is not working
I Am using hp pavilion p001tx laptop. My web cam is not working
It shows a warning
No web cam detected. Try to plugging in a webcam into your computer now. If you are using an integrated camera, Make sure that it is turned on.
Help me please.
My laptop serial number is [Personal Information Removed]Check if the drivers are installed or not.
Try to update the camera drivers and restart the system.
You can also go to device manager setting and see if the webcam is disabled or not.
If everything fails try system resore or run OS recovery. -
Nokia 701 web browser is not working
i have nokia 701. My phone web browser is not
working. Net is working in other browsers like
opera and uc browser. it's a big problem for me i
can't watch online videos and i can't access to google or any other site.. I also delete the cache folder in C drive. But still browser is not working.plz help me to solve this
problem...same here also. happened after i updated social. now cant browse or check for updates
-
Content query web part is not working after chaning the DNS entry
Hi all,
We have a content query web part in the sharepoint site but it is not working after changing the DNS Entry for the web site ipaddress from one server to other . But it is working fine on the server, if we try to access the site from other system content
quey server its not working fine and its giving error message as bellow.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.I have custom XSLT . But it is working fine before changing the dns entry as soon as we change the DNS entry the content quey web part is not working. I tried to delete the content query web part and add it once again to the page, As soon as content query
web part is added to the page the fallowing error message is displayed.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please. -
HP Compaq web cam is not working
I have Hp Compaq Notebook 620. The devices have 2MP Web Cam but the Web Cam is not working. When i try to make it on, its shows error
"No webcam detected. HP Webcam will now Close"
Please suggest the solution of the problem.Hello Manishshakya,
I see that you are having problems with the webcam on your computer. The unit you have is a HP commercial unit.
I would suggest posting your problem in the HP Commercial Forum as well. There are more users with the computer you have on this board and it is specific to your computer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
My HP-Pavilion dv6 web cam is not working properly, fluctuating always
My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always
re-install drivers and try again. ( also easy capture )
-
Web-Cam does not work on Lenovo G480, PLEAS HELP!!
Hello,
I have a Lenovo G480 (20165), and my built-in Web-Cam is not working.
When I enable it by pressing Fn+Esc the little light by the Web-Cam turns on, then shuts off after a second.
So I downloaded the Lenovo Easy Capture, and when I open the software, I get a message saying "Failed To Open Camera".
And when I turn on my laptop, the little light comes on for a short moment, then the light shuts off.
I don't know what to do, It's a brand-new laptop and I've never been able to get the Web-Cam to work, not even on Skype.
I would REALLY appreciate the help. Thank you!Have you installed camera drivers from the us support site? Try reinstalling them
Win 7
http://download.lenovo.com/consumer/mobiles/0qca12ww.exe
http://download.lenovo.com/consumer/mobiles/0lca12ww.exe
Win 8
http://download.lenovo.com/consumer/mobiles/0qca08w8.exe
http://download.lenovo.com/consumer/mobiles/0lca11w8.exe
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it. -
- My tx is so slow, and heats up very fast... so i think that the advance is not working properly
- the web cam is not working, since the 3th time iused... when i try to use it with my msn... got freezed, then y try ending the process and doesnt work, y have to restart it but it stay just on logging off... and do nothing more... so i have to switch off directly from the power button
- The screen freezes... some thimes the screen got freezed... and got color distortions too... so i have to to switch off again directly from the power button
i was thinking that it was a software problem... but i restore my lap and it doesnt work cuz it still being with the same problems... so lately im thinking that its a hardware problem... i call to technical support from mexico... but they can do nothing for me cuz i bought my lap at circuitcity from el paso... and that store close a few months ago... so i need help before de warrantie expires...
This is the second time that my lap gives me problems, last time I made the change at the store but this time it will be impossible cuz is now closed...
that is why I seek your help...
i will be grateful if you answer in Spanish because my English is not very good...
thankyou so much...If your warranty has not yet run out get it serviced, now! All of the comments seem to indicate that it is the motherboard>
-
Web reporting does not work in BW system
Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time 3600
abap/cache_area 10000000
abap/buffersize 1500000
login/system_client 100
INSTANCE_NAME DVEBMGS00
SAPSYSTEM 00
rdisp/wp_no_dia 10
rdisp/wp_no_btc 6
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 1
rdisp/wp_no_enq 1
rdisp/wp_no_spo 1
DIR_TRANS /usr/sap/trans
ms/server_port_<xx> PROT=HTTP, PORT=8080
icm/server_port_0 PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME /oracle/BWD/920_64
ipc/shm_psize_10 104000000
ipc/shm_psize_14 0
ipc/shm_psize_18 0
ipc/shm_psize_19 0
ipc/shm_psize_30 0
ipc/shm_psize_40 114000000
ipc/shm_psize_41 0
Is there anything obvious missing?
Thanks,
TristanFollowing seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number) -
my adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help
Activation no longer works. A replacement download and serial number are available Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
-
Lightroom 4.1 flash web gallery does not work in 32 bit Internet Explorer 9.0
I have a web site with a Web Gallery I created in Lightroom 4.1. . The Web Gallery will not work in the IE 9.0 32 bit browser. It does work in the IE 9.0 64 bit browser. Also, all other flash material seems to work fine in my 32 bit browser such as Youtube and other flash sites material. I have a flash menu created from another product on my web site which also works fine in the 32 bit IE browser but I cannot get the Lightroom Flash Gallery to work in this browser.
Any suggestions?I am not sure to know where I can do this ...
is it this ?: I selected all images
unfortunatly result is the same ... -
Hi.
I have an HP Pavilion dv7 6178us Entertainment PC I just bought it last week. My operating system is Windows 7 Home Premium Service Pack 1 64 bits.
The problem I have is that yesterday I install Skype in the computer and realized that the HP TrueVision HD web cam does not work. The light right next to the web cam will light up but no image will appear on the screen.
I have checked the software that I have in the computer for the webcam and the program is CyberLink YouCam BE version 3.5.
But the web cam does not work. The light right next to it will turn on when I activate Cyberlink, Skype or Messenger but no actual image will come out in computer screen. The computer is fully updated BIOS, Windows 7 and HP.
But the web cam is not working. Could you help me fix this problem?
Best regards:
JEIO71I have a pavilion dv6 notepad. it's about a year old.
about a month ago internal webcam truevision hd stop working.
Called hp tech. they sent a box for me to ship the laptop.
they hp tech attempted to correct the problem via internet
did not work.
wanted me to do a restore to factory setting i stopped him there.
Webcam detected in device manager.
the webcam light come on but no image.
I actually see the back drop through the image space.
running windows 7, fully updated.
I found many comments on the web about the webcam connector disconnecting.
But if it was the case with my computer, the webcam would not be detected.
Many other comments suggests to do a restore to factory setting but \i read also that
does not work often.
I read many comments where disappointed clients believe hp should update
the software but the driver is actually microsoft dating back to june 2006.
Is it possible it's a hardware problem, ie webcam is burned out.
I have received a box to sent it and know they will do a system restore.
Don't feel to go that way.
Many comments refers to hp making an effort to get a driver update.
ps I decided to purchase a logitech webcam, works perfectly.
What else can I do to fix this problem.
Can hp send me another internal webcam.
Maybe you are looking for
-
More than one iPod with iTunes
I have an iPod classic for my car, I'm thinking of getting an iPod shuffle for when I go to the gym, and and I'm thinking of getting iPhone which also has an iPod feature in it. Can all of these be hooked up to my iTunes account? Can I pick and chose
-
Both itunes and quicktime wont open!
so its been a few days and my itunes has not opened. a message keeps popping up that says:: itunes has encountered an needs to close...send//dont send error report.on some topics i read that the problem may be quicktime-related, so i tried opening up
-
I have the following problem : I am using REPORT 6i , when I run a report that contains arabic text it work OK on the previwer but when I generate this report to PDF file I can't read the arabic text it appears distorted, help me plz ...
-
The first photo of one of my albums is vertical but I see it horizontal.
The first photo of one of my albums photo is vertical but I see cropped in the horizontal format. How can I see right? Regards.
-
Calling a funtion package from forms
Hi All, I am trying to call a function package in the forms, but I get the below error. Any help Please.. the code in the trigger : DECLARE CURSOR C1 IS SELECT ' Rule Id: ' || R.rule_id ||' R_SUPP: ' || ROUND(R.rule_support , 2) || ' R_CONF: ' || ROU