WEB report in workbook

Hi,
Can anyone tell me how to save a report, weblayout, in a workbook?
BR
AH
Message was edited by: AH

pl go thru this help.
http://help.sap.com/saphelp_nw04/helpdata/en/3a/89883989676778e10000000a11402f/content.htm
Saving a report:
after executing the Query,cilci on 'Save' (in bex tool bar-2nd from left)>save as new work book>provide description and save it..
Inserting a Query in workbook:
Open the Workbook>click on sheet2>go to Bex tool bar->settings (3rd from right)->insert Query->select the Query->OK...and save this workbook.
What do you wanted to know about weblayout?
Hope this helps.

Similar Messages

Exporting Web Report to Excel - SAPBW_DOWNLOAD

When exporting a web report to excel it uses the embedded SAPBW_DOWNLOAD template. Is it possible to use and assign a seperate template like the one I'm currently using for Workbooks.
--KAL

Hi,
I don't understand what do you mean here. Do you mean we could not reduce size in the first time? We have exactly the same problem and the file size is about 20-40 MB. This size is too big to download by end user. It's excel file with .xls extension. When I open it by Excel and then try to Save As, it try to save as Web Page with *.htm extension. If I resave as a Excel Workbook format, the size is reduced to 3-4 MB. My question is the same as the other folk, how do I save it as Excel format with proper size the first time?
Thanks,
Yujun

Exporting a web report to Excel

Hi,
When I export a web report to Excel, it works fine. when I resave the same file as .xls file, the excel file size is reduced drastically (less than 1/10).
Why is this happening? Any way to reduce the file size in the first stage, that is down loading to Excel from web.
Thanks
Unni

Hi,
I don't understand what do you mean here. Do you mean we could not reduce size in the first time? We have exactly the same problem and the file size is about 20-40 MB. This size is too big to download by end user. It's excel file with .xls extension. When I open it by Excel and then try to Save As, it try to save as Web Page with *.htm extension. If I resave as a Excel Workbook format, the size is reduced to 3-4 MB. My question is the same as the other folk, how do I save it as Excel format with proper size the first time?
Thanks,
Yujun

Reports missed in Favorites Shared Folder(in web report)

Hi experts,
I missed shared folder reports in Favorites folder in Web report. where can i go and set those reports then end users able to see those reports and can access.
Thanks in Advance
Regards
Shah

Dear shah,
you have to create roles per transaction pfcg and assign them to your End-Users, per Query Designer/ WAD or Bex Analyzer you can then publish queries/web templates/workbooks into this role.
Alternatively you can add/change/remove a object per transaction pfcg.
Best Regards

Printing of Web Reporting and Convert into PDF

Hi friends,
I want to give print of my web report from Browser.. what is the procedure for this... my brwser 10 pages of data.. i want to give specific page for printout...
And also.. i want to convert my webreport into PDF format... how can i do this...
can any body tell me what is the procedure for this..
Thanks.. and Points will be assigned..
@jay

Hi,
BW Web Publisher Toolbar
The version of the toolbar that you use with the Web Publisher, depends on whether you store the Web templates on the BW server or the ITS server (see Determining Path and ITS Settings).
If you have chosen the ITS as the server, the toolbar has the following functions:
Symbol
Function
Create new ITS Web template
You use this function to create a new Web template.
Check out ITS Web Template
You use this function to check out an ITS Web template, and store it locally. Storing the ITS Web template locally, means that you are able to change it, by adding a new item, for example. You either overwrite the old ITS Web template, or create a new one. You have to store the new ITS template under a new name.
Check in ITS Web Template
The ITS Web template is checked in, and saved in the BW system.
Publish to ITS
The ITS Web template is stored on the ITS you select.
Display Web template in the Browser
The Web template that has been checked in and published on the ITS, is displayed in the Web Browser.
Copy HTML tag to clipboard
You use this function to save the item as an HTML tag on the clipboard.
Wizard
This function takes you to the Web Publisher Wizard.
See also:
Creating Web Reports with the Web Publisher Wizard
If you have chosen BW as the server, the toolbar has the following functions:
The publish function is deactivated, because it is only used in conjunction with ITS Web templates. The other symbols have the same functions as described in the above table, but they refer instead to Web templates that are stored on the BW server.
Views
The saved query views that the Web reports are based on, are displayed in the Views field. You use the Switch Workbook button to get to the Open dialog, where you open queries in other workbooks.
Items
The items that are already available for the view you have chosen are displayed in the Items field.
Choose New Item to create a new item, and to specify the item type used (map, chart, table, navigation block, and so on).
Choose Change Attribute to determine the value of the highlighted attribute for the item you have chosen.
Choose Save item to save the item you have been editing.
Choose Delete item to delete the selected item.
Properties of the Current Item
In the Properties of the current item field, the attributes that correspond to the item type you have selected are displayed. Depending on the type of attribute, you activate or deactivate attributes by double-clicking on the relevant attribute, and you determine the value of the attribute with either a double-click, or by choosing the Change Attribute... function.
You can convert the spool to PDF using the program RSTXPDFT5 or
using the fun module CONVERT_ABAPSPOOLJOB_2_PDF.
then you can mail it to others using the fun module
SO_NEW_DOCUMENT_ATT_SEND_API1.
Hareesh

Migration of work books, queries and web report

Hi,
kindly give me the steps to migrate workbooks, queries and web reports from BW 3.5 TO BI 7.0
Regards
Asim

Hi,
Kindly check the below link:
Migration of Queries and Work Books from BW 3.x to BI 7
/people/teja.badugu/blog/2008/11/11/migration-of-queries-and-work-books-from-bw-3x-to-bi-7
Hope it helps,
Thanks,
Amit

Problems access to a web application (Web Interface or Web report)

Hi,
We found problems with the access to web application. Some users have problems with direct links to the web applications(Web Interface or Web reporting), when they click on the link an error message appears, the message displays the following text:
"Cannot open file Bex?sap-language=ENbsplanguge=ENcmd=idoc_TE.."
Clicking in details the message is "No Access to specified file"
For this users the access to excel reporting is correct, the message appears when they click on the direct web links through the browser or directly in BW system, but if they type the URL they can access. Other users can use the direct web link without problems.
I highly appreciate any help or idea about how to solve this issue.
Thanks in advance.

HI,
please ask to your basis that check the language of every single user on su01 tx.
This is the problem i think.
Natalia.

How to remove blank pages from WebI Report in view page layout option

Hi,
I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
Thanks in advance.

Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
Now check if there are any cell going into second page.
- if there are any blank cell which is there after table.
you have to check formating very carefull.

Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

Analysis Authorization in BO 4.0 Webi report

Hi All,
I am using BO 4.0 and creating connection from Information Design tool to a BW query using BICS client. This connection is then published to CMC.
We are using SAP authentication and importing the roles from BW system. We have added profiles to this role and these profiles have Analysis Authorization set on Company Code. So one user can access data to one company code and vice versa. Now this works well in Bex Analyzer, but if I try to create a report in Webi, the analysis authorization fails. I went through the forum before posting this question and I found that is in 3.1 version and in most cases using SSO in universe connection solved the problem.
However in 4.0 I am using BICS client and followed the same processes to create a connection but for some reason it doesn't work ? Is this suppose to work differently in 4.0 ?
I have tried:
1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
3. Publish the connection to CMC with my Enterprise and SAP ID and in both cases it doesn't work.
Please let me know if anyone encountered a similar issue and what is the best method to resolve this.
(BO 4.0 no service pack or fix pack installed on the system yet)
Thanks - Appreciate your help !
Prasad Rasam

Ingo,
1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
>> Correct you need to setup you OLAP Connection with SSO.
>>> What I meant was I created the connections using both the methods, Using SSO it allows me to create a connection. The ID which I am using to create a connection has Admin access to BOBJ system. When I login as a regular user to create a Webi report and select this new connection, it throws an error message 'The DSL Service returned an error: com.businessobjects.dsl.services.workspace.impl.QueryViewAnalyzer$CannotGetCubeFromConnectionException: Cannot get the cube from the connection'
Using the other method to create a connection with User ID and password, I can create a connection and with the normal user login I can connect to the BW query but Analysis Authorization doesn't work.
Ingo : Could you be more specific what you mean here with the different users ? When you say "regular" user are you referring to an SAP credentials or SAP BusinessObjects Enteprrise credentials ?
2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
>> The variable in the BEx query needs to be an authorization variable.
>>> This has already been set as Authorization variable. There is still a question here. If I select the variable as Authorization variable, I cannot set the other parameters in the query properties such as Mandatory variable (as this is greyed out).
Ingo : What other parameters would you like to configure ? Could you perhaps describe the scenario with more details ?
regards
Ingo Hilgefort

BW Analysis authorizations issue in BO Webi Report

Dear All,
I have one webi report which is on BEx Query-universe.
Query has 6 authorization variables with ready for input(optional).
User has authorizations for all 6 fields.
But when we execute the webi report it is throwing error message like" query do not retrive data"
One of the 6 authorization fields has only few values , when we give " * " to this field the user can able to execute the report.
Could anybody tell me what is need be done here
regards
mhreddy

Hi!
Probabily the combination of authoriztions funcions are executing considering "and".
See your configuration to considerer "or".
Test one by one.
bye

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

How to create a event at the time of scheduling a webi report

if event fires then only it schedules the webi report
give in a brief steps
pls its urgent for me.

Refer to the below blog
http://scn.sap.com/community/bi-platform/blog/2013/01/07/cmcevents-in-business-objects-and-its-usage
Thanks,
Prithvi

Error while executing webi report

Hello Experts,
I created a universe using SAP BI query. Now I am using this query to create webi report. so while creating webi report i select 1 characteristics and 1 key figure from the universe and putting them on result objects pane.
After putting these object when I execute the report i get following error:
Database error: SOFA Driver : Catastrophic failure. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
Can anyone suggest me how to resolve this error?
Regards,
Nirav Shah

yes, underlying queries work perfectly fine. Universe are created without any issue. However,in WebI, when I drag the any TWO objects under any class or even combination of one object and one measurement key, as soon as I refresh query, the error pops up. If there is JUST ONE object, no issue at all. I can see the data.
Mean...if there is more than one object in any WebI report, the error is thrown by WebI report. And this happens only while running WebI against SAP BW/BI, query or against any InfoCube.
Thanks

Error when scheduling WEBI report to FTP server

Hi
We are getting error "destination directory error. CrystalEnterprise.Ftp: 550 Requested action not taken" while scheduling WEBI report to FTP server.
Any help would be appreciated
Regards,
Anisa

Hi All,
I want a run my report once by scheduling, so i provide a time interval for scheduling a report
start date/ time : 11:38:AM 10/30/2011
end date/time : 11:43:AM 10/30/2011
after completion of end time....report is failed and fetching an error
Error : Object could not be scheduled within the specified time Interval
Any solution for resolving this error

WEB report in workbook

Similar Messages

Maybe you are looking for