Web-server switch colors from blue to red

Hi,
on a linux-box is a labview-vi running and
I am able to get the vi with the .snap?
or the .monitor?-command over the web.
But the colors of the jpg are switched
from blue to red and red to blue.
Any Idea?
Thanks a lot!
Peter Schmitt
Carl-Schaefer-Schule privat
Hohenzollernstr. 30 Affalterbacher Str.24
71638 Ludwigsburg 71642 Ludwigsburg
Tel.07141/9602-0 07144/863470
Fax 07141/9602-288 07144/863471

Hi Peter,
I had the same problem and I didn't find any other solution than change the
display mode to 256 color mode.
Peter Schmitt wrote:
>Hi,>>on a linux-box is a labview-vi running and>I am able to get the vi
with the .snap?>or the .monitor?-command over the web.>But the colors of
the jpg are switched >from blue to red and red to blue.>>Any Idea?>>Thanks
a lot! >Peter Schmitt>---------------------------------------------->Carl-Schaefer-Schule
privat>Hohenzollernstr. 30 Affalterbacher Str.24>71638 Ludwigsburg
71642 Ludwigsburg>Tel.07141/9602-0 07144/863470>Fax 07141/9602-288
07144/863471>----------------------------------------------

Similar Messages

How can i change my e-mail address color from blue to black when i send a new message

How can i change my e-mail address color from blue to black when i send a new message

Hi Steven, if you send to yourself does it come through blue?
Is this in the Header or a Signature?

My application needs to access web server. So, from that application how do i call firefox ? and how do i pass an argument such as url/web server ip address?

My application needs to a access web server. So, from that application how do i call Firefox ? And how do i pass an argument such as the url/web server ip address?
== This happened ==
Not sure how often

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox.
[http://forums.mozillazine.org/viewforum.php?f=25]
You'll need to register and login to be able to post in that forum.

Web Server Switch

Hello,
I selected the CF internal web server during install (IIS was
not available.) I managed to get through it and the install
succeeded. Now I used the web server config tool to switch to IIS
(now it's available.) My websites now don't come up. I'm pretty
sure it's a security/directory issue but I can't figure out where
the problem is.
Adobe support is non-existent if you don't have $500 to ask a
question.
Thank you.

I'm not sure what you mean by market economy but if you mean
capitalism then of course. Any economist will tell you that a
client wants value for his money. By denying me real tech support
even before the product was installed they are pushing away a loyal
client and possibly failing to make a new one. Hardly good
economics if you ask me. Further, it hurts all of us if ColdFusion
loses market share because it's harder to form communities and sell
our services to clients.
Ken did provide me phone support after I kicked and screamed
and he was instrumental in helping me with the installation. We
were able to solve the issue(s) within a couple of hours rather
than the three days it had taken me up to then. Those three days
were torturous trying to figure out what was wrong with the
install. Also, although we did get the install completed and set
up, Ken is being modest. I doubt I could have completed the set up
without his support on the phone. It was not simply a security
issue.
Adobe really needs to rethink the way they're doing support.
Of course I am one single exaple, but in my case a few minutes on
the phone at the onset of this problem would have saved everyone
much time and effort.
We have other server software that perform other tasks such
as Imail from Ipswitch that the way they work it is with annual
contracts. You buy a contract and get the software and support for
a year. If the following year you don't want to upgrade the
software and don't need support then you don't pay.
Adobe is selling the software as is. You want it fixed (is it
a bug in the Adobe product or you?), you have to pay. And I know
they have "free" installation email support. In my case they
emailed me to check the instructions first and then when I
complained they emailed me to call them to do it over the phone.
When I called they said: Yes, we can do it over the phone but you
have to pay.

Migrating to Web Server 7.0 from Apache HTTPd document

We've [made available|http://wikis.sun.com/display/WebServer/Migration+from+Apache+HTTP+Server] a work-in-progress document on our Wiki page discussing some of the common problems people have when they migrate from Apache HTTPd server to Sun Java System Web Server 7.0.
We'd love to get your feedback. What are we missing? Have some information you'd like to add? The comments section is open to all feedback.
Thanks!

can this be made as a topic rather than a post in the forum ?

Can print test pages from embedded web server., put not from windows

Hello,
I have a P1102w that worked perfectly through the last 5 month.
Two days ago it stopped printing anything for some reason. What happen is, when I print something, it spools, but then I get Error-Printing under the status when I double click the printer icon in the "devices and printers" manager of windows 7.
Right now I can see the printer in Ad Hoc. I can load the embedded web server,. And I can print test pages from the embedded web server.
However, if I tried to print test pages using the printer icon in "devices and printers" manager".. it doesnt print!
If I go to Devices and Printers -> Properties -> Advanced -> "Print directly to printer" -> Apply
I got an error box: "Printer settings could not be saved. Operation could not be completed (error 0x0000070c)."
The printer works fine when connected to other laptops (with exactly the same driver/setting)..
This problem is driving me crazy !
Thank you in advance for your help

Hi m-rasheed,
An ad-hoc connections is much more unstable than an infrustructure network using a router. At this point i would suggest getting a wireless router, and then connect the printer to your network through the router.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02847467&tmp_task=useCategory&cc=us&dlc=en&lang...
Routers:
http://www.shopping.hp.com/webapp/shopping/can.do?storeName=accessories&landing=computer&category=ca...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Using Sun Web Server 6.1 from the IDE

Using JSE 8 with Sun Web Server 6.1 set as the target container, I have a SUNWS61deployment.xml file created.
That didn't exist in JSE 7. Is it WS 6.1 SP4 or SP5 -related ?
I also have ws61-sun-web.xml with a simple <sun-web-app/> tag (empty deployment descriptor).
What should this file contain? Is it a replacement for sun-web.xml?
Do I still need sun-web.xml? Its DTD declaration sounds like Sun
App Server 7 (http://www.sun.com/software/sunone/appserver/dtds/sun-web-app_2_3-1.dtd)
So you have plans to make "Sun Resources" (pools, JNDI resources, ...) created in the IDE be registerable directly in the Web Server just like it's possible with the sun app server?
How safe is it to use JSE 8 with an older Web Server Service Pack (say 6.1SP1)?

SUNWS61deployment.xml is created bythe IDE to be used internally and not to be used by the developer. This file wouldn't be sent to webserver after deployment.
The ws61-sun-web.xml is sun-web.xml only and yes it is same as it is in Appserver7 as the webcontainer for both Webserver6.1 and Appserver7 are same. After deployment to webserver, ws61-sun-web.xml is renamed to Webserver as sun-web.xml by the IDE. When opened the developer can edit in the XML editor.
The reason for having it as ws61-sun-web.xml in IDE is to avoid the clash between sun-web.xml of Appserver8.1 which is J2EE1.4 based whereas Webserver6.1 Web container is J2EE1.3 based.
It should be okay to use any service pack of Webserver6.1 with JSE8
Hope this helps

Applet hangs web server when upgrading from 1.6 to 1.7

I've got a client-side printing application which works fine on 1.6 and fails on 1.7 where it essentially hang the server on the connect option to the server and loading the jar file. Specifics:
PC Client running windows 7 x64
Browser versions IE9, IE10, Firefox 17.0.1 (PC-client) all fail
Client PC has latest Java 1.7.0 10-b 18 installed
Web server is Apache2.4.3 x64 running on Windows 2008 Server R2 through the network
Jar file is signed and the certificate is loaded
Apache server is sitting on another server through a network connection. Backrev java to 1.6 and it passes. I've specified the -Djava.net.prefIPv4Stack=true option in the applet call but it doesn't fix the issue.
The java console loads but then hangs on the connecting portion:
Java Plug-in 10.10.2.18
Using JRE version 1.7.0_10-b18 Java HotSpot(TM) Client VM
User home directory = C:\Users\user
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
cache: Initialize resource manager: com.sun.deploy.cache.ResourceProviderImpl@1ae81ab
security: property package.access value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.
security: property package.access new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws
security: property package.access value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws
security: property package.access new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy
security: property package.access value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy
security: property package.access new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp
security: property package.definition value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.
security: property package.definition new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws
security: property package.definition value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws
security: property package.definition new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy
security: property package.definition value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy
security: property package.definition new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp
security: property package.access value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp
security: property package.access new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp,org.mozilla.jss
security: property package.definition value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp
security: property package.definition new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp,org.mozilla.jss
security: --- parseCommandLine converted : -Djava.net.preferIPv4Stack=true
into:
[-Djava.net.preferIPv4Stack=true]
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@8bbbf4
basic: Plugin2ClassLoader.addURL parent called for http://10.100.1.61/patholog/java/patholog/dist/PathologLibS.jar
security: Blacklist revocation check is enabled
security: Trusted libraries list check is enabled
network: Cache entry found [url: http://10.100.1.61/patholog/java/patholog/dist/PathologLibS.jar, version: null] prevalidated=true/0
cache: Adding MemoryCache entry: http://10.100.1.61/patholog/java/patholog/dist/PathologLibS.jar
cache: Resource http://10.100.1.61/patholog/java/patholog/dist/PathologLibS.jar has expired.
network: Connecting http://10.100.1.61/patholog/java/patholog/dist/PathologLibS.jar with proxy=DIRECT
network: Connecting http://10.100.1.61:80/ with proxy=DIRECT
network: Connecting http://10.100.1.61/patholog/java/patholog/dist/PathologLibS.jar with cookie "Patholog=vl141e491gffhpc07aupt0rnq5"
What is most irritating is that a local instance for debugging (i.e. apache2.4.3 x64) running locally and running the application on the same machine) passes perfectly so it appears that it involves a network connection rather than a localhost operation.
I noticed on a good connection the server returns with ResponseCode 304. I do not see that line in the log on the failing applet load. Apache logs set at debug show no errors even though the operation hangs the server.
Anyone got any ideas on how to debug and resolve this?
-Thanks
-G

More information:
Installed jre.1.6.37 (x32 version) along with 1.7.10 (x32 version) and the applet loads. Installed 1.7.10 (x32 version) only on the windows 7 x64 client fails. I've done both the x-java-applet method and the JNLP method and both hang. The JNLP j2se version is set to "1.6+" so in theory 1.7 should jre should work fine without a 1.6.37 loaded.
I've got wireshark dumps that I'm analyzing and noticed that there two OCSP responses (successful) but nothing after that, specifically where it hangs. Any ideas on how to debug this further?

Can you change the theme color in iMovie for example from its current color of blue to red?

Can you change the color of a theme in iMovie ?- example: the sports theme is set to be blue and I would like it red.

No. And that would be nice in your type of example.
I would recommend that you could TRY to use the "Map, Background & Animatics" earth icon> (next to transitions tool tab), scroll down> add RED background, and ADD Transitions inside some. That might help your example out.
Hope this helps. Cheers

Do I need to be concerned that my highlight on everything went from blue to red?

Do I need to be concerned that for no reason all my highlight both on e-mail and excel went from a blue shade to a red shade? I am not the only user so maybe someone changed it.

Apple menu > System Preferences > General > Highlight color

Start up screen changes color from blue/gray to brown

My Macbook Pro recently started changing colors: When 'start up' it begins with a blue/gray (normal) color but then changes to a light brown color. The apple icon is still present though...
Any ideas as to why the screen changes its color?

You should try to erase the drive with Disk Utility, so any filesystem problem will be fixed, but if you haven't made a backup, you'll lose files.
1. Go to Utilities > Disk Utility.
2. Select Macintosh HD in the sidebar and go to Restore tab.
3. Connect your external disk and drag it from the sidebar to Destination box, and press Restore.
If it doesn't help, take the Mac to an Apple Store

CCMS: switch direct from green to red

Hi all,
we are running NW2004s and I have a problem with CCMS.
I'm monitoring an OS process with MTE_Class Cl_ConfProcessCount and want to get GREEN if the process is running once and switch to RED if the process is not running. But whatever I do in the properties it only shows YELLOW if the process is not running. How do I have to configure the class properties?
Best regards
Andreas

Hi Annu,
just to add to what others have said,
lets take a scenario...where delta have failed..u need to do a repeat delta..in such cases..u need to make the failed request to red from green and delete the request. This will let the infopack know that the last delta is incorrect and when you request for repeat delta...the infopack will fetch the previous records + the present records.
Hope this helps...post back if u need more help.
Assign points if helpful
Rgds
AP

How do I change the text color from blue in Safari on Macbook Pro?

I have trouble seeing the light blue text color -- many article use this. How can I change the text color?

Is this a particular website where you see the light blue color?
If so, please post a link to that site in your Reply.
Exactly which light blue color are you referrting to ??

InDesign CS5: Why do hidden codes turn from blue to red?

InDesign CS5: I have a 20 page indesign document file that is part of a 23 document/chapter InDesign book. The hidden codes are light blue through chapters 1 and 2. Then, in the middle of chapter 3, at the bottom of the 10th page, the hidden codes turn red through the end of that chapter. The next chapter resumes solid blue hidden codes. What does the red mean and what do I need to do to correct that. Thank you.

Sounds like that text frame that holds the hidden characters is on a different Layer.

Photoshop CS 5 need help changing color from yellow to red

Trying to change the background image of a webpage in photoshop CS 5.
Can someone tutor me on the proper way to change the yellow on this graphic to the following RGB
R153
G11
B25
Thanks!

Many options …
In this case I would recommend to
• select green channel (command-click it)
• create a Solod Color Layer of the intended color
• go into the Layer Mask (alt-click it in the Layers Panel) and use Image > Adjustments > Curves and hit Auto to get the brightest Pixels to white
• use the Burn Tool set to Shadows to get the lower part to black (which corresponds to transparent)
• create a black Solid Color Layer underneath that
Other options would be a Hue Saturation Layer set to Yellows, a Solid Color Layer set to Blend Mode Color and with a Layer Mask etc.

Web-server switch colors from blue to red

Similar Messages

Maybe you are looking for