Web Service in ECC ABAP only.

Hi
although this question is not related to PI I thought more people would know about Web Services in this forum.
I have a single stack ABAP ECC system (has no JAVA stack)
Can I still create a web service from one of my Function Modules and get something to then consume this ? i.e. will it work?

Thanks for the replyt. Yes I know they can be...and I've got this far.....and this is documented in SAPHelp http://help.sap.com/saphelp_nw04/helpdata/EN/9b/dad1ae3908ee44a5caf57e10918be9/frameset.htm
But this does not explain if possible without a corresponding JAVA stack.
I thought somebody might know this.

Similar Messages

Web Service consumer using ABAP-PROXY

Hello,
I want to test Web Service consumer using ABAP-PROXY . So I do what is explain in the weblog :
[http://wiki.sdn.sap.com/wiki/display/Snippets/WebServiceconsumerusingABAP-PROXY]
But when I execute the programm, the message : 'No valid source context supplied'.
But, proxy and port are ok and activate.
Can you help me.
Thanks.

Hi Jitesh,
Thanks for the link. I checked but did not find helpful info there.
I have managed to make it work yesterday. Two issues were identified.
1. The namespace in the WSDL file imported into ESR as an external definition. I need to create the same namespace in ESR before importing the WSDL and then import the WSDL into that namespace.
2. The authentication method. The authentication method in the IIS configuration of the .NET web service has to be set to Basic Authentication. Then I set logical port of the consumer proxy in the OSAMANAGER to use Basic Authentication also. So far only the Basic Authentication works in my test scenario.
I am closing this question.
Regards,
Jiannan

Problem consuming Web Service from ECC 6.0 using dual certificates

Hi, I am trying to consume a secure web service on ECC 6.0 - so far without much luck.
When I try to connect to the ws server, it seems there are three certificates in action: a CICS certificate for establishing the SSL connection, a 'root' certificate from the PKI certificate issuer, and a private certificate issued by the above issuer (please forgive me if a have the syntax wrong - certificates are not my primary line of work). So, using Trust Manager (STRUST), I have created a PSE named 'OES' and imported all three certificates into it.
In SOAMANAGER I have set up the end-point using the WSDL-file and set the following parameters:
- Authentication Method = X.509 Client Certificate
- Trustworthiness Method = Holder of Key
- Issuer = <issuer from the root certificate>
- Name of Attester = <blank>
- Validity of SAML Assertion = 180
- Caching of SAML Assertions = False
- Attester System Destination = <blank>
- Name of Attester = <blank>
- User = SRxxxWS
- Password = <blank>
- Client PSE = OES
When I try to consume the web service, I can see in the log files that the CICS certificat is used for establishing the SSL connection but all I receive back is an HTTP 403 "Client Authentication Error". If I remove the CICS certificate from the PSE, the connection is not made.
How do I make the client certificate available for the connection? Have I approached the problem from the wrong side? Has anybody experienced something similar? Any help will be highly appreciated.
Thanks,
Bo

Hi,
I am not Certificate expert either but you can get plenty of help from "Security" forum on SDN. I can help you bit with some related SAP notes and forum answers:
See following notes :
1324884 - Analysis of ABAP Web Service SOA Configuration
1318906 - Trace analysis of SSL problems
1319507 - Overview: Analysis of ABAP Web Service Configuration
See this forum discussed about consuming secured ws in webdynbpro:
Problem in Calling Secure Webservice.
Articles:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/92914af6-0d01-0010-3081-ded3a41be8f2&overridelayout=true -
Web Services Security Configuration Guide (discussed IBM and NW WS security but you can find some examples and hints there)
Regards,
Gourav

Calling a web service in an ABAP code

Hello Experts,
Is it possible to consume a web service in an ABAP code?
Note: I am using SAP R/3 4.7.
Thanks!
Jeffrey

Do you mean opening the web browser through our ABAP source code?
If yes, then please use the function module: "CALL_INTERNET_ADDRESS". This will do the job for you..
Reward points if I have helped you.
Regards

Issue in creating web service for a ABAP Function Module

Hi,
now i'm learning how to create web service for a ABAP Function Module. I used the following steps.
1. select the Function Module, named "zws_test".
2. in the context menu, select "create->proxy object". so we enter into wizard.
3. in the wizard, press the radio button "Service Provider".
4. in the next page, press the radio button "Existing ABAP Objects(Inside Out)".
5. In the next page, Enter the "zws_test_prvider" as Service Definition and select "Function Module" as Endpoint Type.
6. in the next page, enter "zws_test" as Function Module and mark the "Mapping der Namen" button
7. in the next page,select "PRF_DT_IF_SEC_LOW" as Profile and mark "Deploy Service".
8. Save in the local package.
9. then it will pop up a window with title "WSDL Source". i selected "URL/HTTP Destination" and press "OK".
10.in the next page, i enter the URL as "http://hostname:portnumber/", and press "OK".
11. then it will pop up a window with title "Display logs". A record with error message "HTTP error(return code 404, message "Not found")" appears.
12. i press "ok" and a service provider with name "zws_test_prvider" appears in my local package.
13. i use "zws_test_prvider"'s URL to create a service consumer "ZCO_WS_TEST_CONSUMER" and logic portal "LP1".
14. But when i test my service consumer "ZCO_WS_TEST_CONSUMER", it will throw an exception "cx_ai_system_fault" with errortext "SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/".
15. I use t-code SM59 to test connection and get the following info.
      Status HTTP Response     200
      Status Text                      OK
      Duration Test Call             328 ms.
who can give me the reasons about item 11 and 14, and explain me how to create service provider and service consumer for a Function Module.
Thanks in advance
Johnney

have you seen this weblog
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices

Handling Java Web Service Exception in ABAP

Hi
I have created a web service in Java using NWDS.
Which has a businessMethod which throws a Exception based on certain business logic.
I have consumed this Web Service Method using .NET Client.
i am able to catch the Exception and get the Exceltion Message.
But when i try to consume the same web service Method in ABAP,
i am not getting the Exception Message .
The Method call works fine.
What am i missing here ?
regards
Rajendra

Hi,
Upon further investigation and comparison of the custom exception object (generated during consumer proxy creation for a CUSTOM web service) with a standard exception object(generated during consumer proxy creation for a STANDARD web service) I found that the sub-elements of the exception structure errorPart are not available in the custom exception object (and one of these sub-elements is the message text).
Call Stack,ExceptionName and MessageText Elements are missing in the errorPart node of Exception
Node. as seen in the ABAP Exception structure generated.
Queries:
1. Are there any standards which need to be followed when coding exceptions in the Java web service for consumption in ABAP such that all sub-elements of the exception object are also created in ABAP during the proxy creation?
2. Can we get the Java code for a standard web service available in SAP Netweaver? Asking the same as the exception object created for the standard web service RoomABAPWS contains the sub-elements. Getting the Java code of the same will be very helpful in resolving the issue.
Regards
Rajendra

Consuming EJB Web Service in WD ABAP component

Hi,
I have a scenario where I have Portal KM access methods exposed as EJB Web Service. This web service is deployed on J2EE engine.
And I have to consume this web service from my WD ABAP component controller.
Any idea how this can be achieved?
Thanks and regards,
Amey

This doesn't really have anything to do with Web Dynpro. Normal ABAP functionality is used for the consumption of a web service. In ABAP we create a proxy class based off the WSDL of the web service. This proxy class can then be called from within Web Dynpro like any other ABAP class. You can read about consuming a web service in the online help:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/9e/c7a3591dc74a679bbc9716354e42af/frameset.htm

Error consuming Web service from an ABAP Program

Hello guys,
I'm trying to consume a Web Service that is exposed in the internet. The conecction to the Web Service its via SSL.
I'm having a problem at the moment I call the web service from my abap program. But I'm able to test the same web service, from the SE80 tx with out trouble.
I have identify that there is a difference in the SOAP envelope, that its received in the Web service, when I call it from the test enviorment and when I call it from the program.
This is how it is received from the TEST tool (a succesfull call of th WS) :
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header><n0:Trace xmlns:n0="http://www.sap.com/webas/630/soap/features/runtime/tracing/"><TraceLevel xmlns="http://www.sap.com/webas/630/soap/features/runtime/tracing/">Error</TraceLevel></n0:Trace></soap-env:Header><soap-env:Body><nr1:putXMLDocument xmlns:nr1="http://bel.bci.cl/WsBEL/services/Carga"><body><?xml version="1.0" encoding="ISO-8859-1"?><Mensaje><RutEmpresa><Numero>76555400</Numero><Digito>4</Digito></RutEmpresa><RutUsuario><Numero>12307972</Numero><Digito>8</Digito></RutUsuario><Convenio>58422</Convenio><Pin>aro79728</Pin><Archivo><Tipo>PPR</Tipo><Plantilla>2142970592</Plantilla><Nombre>cargatest174.txt</Nombre><Cuerpo><![CDATA[G126919727 JORGE CRISTIAN VARGAS ROMERO 0000VVC01600000000000000000000245FAC0000000089900032000021030000010000000000190000 2910200714082008Boletas honorarios|]]></Cuerpo></Archivo><Fecha>20080814</Fecha></Mensaje></body></nr1:putXMLDocument></soap-env:Body></soap-env:Envelope>
And this is how it is received when I consume the web service from the ABAP program.
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header><n0:Trace xmlns:n0="http://www.sap.com/webas/630/soap/features/runtime/tracing/"><TraceLevel xmlns="http://www.sap.com/webas/630/soap/features/runtime/tracing/">Error</TraceLevel></n0:Trace></soap-env:Header><soap-env:Body><nr1:putXMLDocument xmlns:nr1="http://bel.bci.cl/WsBEL/services/Carga"><body><?xml version="1.0" encoding="utf-8" ?><nr1:putXMLDocument xmlns:nr1="http://bel.bci.cl/WsBEL/services/Carga"><body><?xml version="1.0" encoding="ISO-8859-1"?><Mensaje><RutEmpresa><Numero>76555400</Numero><Digito>4</Digito></RutEmpresa><RutUsuario><Numero>12307972</Numero><Digito>8</Digito></RutUsuario><Convenio>58422</Convenio><Pin>aro79728</Pin><Archivo><Tipo>PPR</Tipo><Plantilla>2142970592</Plantilla><Nombre>cargatest174.txt</Nombre><Cuerpo><![CDATA[G126919727 JORGE CRISTIAN VARGAS ROMERO 0000VVC01600000000000000000000245FAC0000000089900032000021030000010000000000190000 2910200714082008Boletas honorarios|]]></Cuerpo></Archivo><Fecha>20080814</Fecha></Mensaje></body></nr1:putXMLDocument></body></nr1:putXMLDocument></soap-env:Body></soap-env:Envelope>
As you can see, it is generating a nr1:putXMLDocument tag, that it should not go there.
Why do you think that this situation is happening? Please guys, this is very important, and need your help. Thanks in advance.
Samuel.

BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
Calling WebServices from ABAP via HTTPS
Consuming Web Service from ABAP by Durairaj Athavan Raja
Search on SDN wiki, and you will find above mentioned links.

Problem consuming web service created by ABAP via standalone java client

I'm trying to consume web service created by ABAP in R3 system via standalone java client. I should be getting a string reply after consumed the web service (ZSMS_INBOUND), but so far i received null. I cant find any exception or log to trace the problem. Any help would be appreciated. Is there anything wrong with my client calling the web service?
public void myMethod{
          // TODO : Implement
          try{
               Stub stub = (Stub)new ZSMS_INBOUNDServiceImpl().getLogicalPort();
               stub._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY,"http://mytest:8080/sap/bc/srt/rfc/sap/ZSMS_INBOUND?sap-               client=100&wsdl=1.1&mode=sap_wsdl");
               inboundService = (ZSMS_INBOUND) stub;
               BAPIRET2 str = inboundService.ZSMS_INBOUND(date, message, modemId, smsId, tel, time);
               ackDeliveryArray<i> = str.toString();
          }catch (Exception e) {
               e.printStackTrace();
Generated following SAP help standalone proxy creation steps.
***files fr SEIs
ZSMS_INBOUND.java   (interface)
ZSMS_INBOUNDService.java (interface)
ZSMS_INBOUNDServiceImpl.java
ZSMS_INBOUNDSoapBindingStub.java
***files fr Proxy classes
ZSMS_INBOUND.java
ZSMS_INBOUNDResponse.java
BAPIRET2.java
.... many more files
the wsdl is as below (generated by ABAP):
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:n0="http://www.sap.com/webas/630/soap/features/authentication/" xmlns:sap="http://www.sap.com/webas/630/wsdl/features" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="urn:sap-com:document:sap:rfc:functions" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <wsdl:types>
- <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions" elementFormDefault="unqualified" attributeFormDefault="qualified">
- <xsd:simpleType name="char1">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char10">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char17">
+ <xsd:restriction base="xsd:string">
<xsd:maxLength value="17" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char170">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="170" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char20">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="20" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char220">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="220" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char30">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char32">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="32" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char50">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="date">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
<xsd:pattern value="\d\d\d\d-\d\d-\d\d" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="numeric3">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="numeric6">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="6" />
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="time">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="8" />
<xsd:pattern value="\d\d:\d\d:\d\d" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:complexType name="BAPIRET2">
- <xsd:sequence>
<xsd:element name="TYPE" type="tns:char1" />
<xsd:element name="ID" type="tns:char20" />
<xsd:element name="NUMBER" type="tns:numeric3" />
<xsd:element name="MESSAGE" type="tns:char220" />
<xsd:element name="LOG_NO" type="tns:char20" />
<xsd:element name="LOG_MSG_NO" type="tns:numeric6" />
<xsd:element name="MESSAGE_V1" type="tns:char50" />
<xsd:element name="MESSAGE_V2" type="tns:char50" />
<xsd:element name="MESSAGE_V3" type="tns:char50" />
<xsd:element name="MESSAGE_V4" type="tns:char50" />
<xsd:element name="PARAMETER" type="tns:char32" />
<xsd:element name="ROW" type="xsd:int" />
<xsd:element name="FIELD" type="tns:char30" />
<xsd:element name="SYSTEM" type="tns:char10" />
</xsd:sequence>
</xsd:complexType>
- <xsd:element name="ZSMS_INBOUND">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="DATE" type="tns:date" />
<xsd:element name="MESSAGE" type="tns:char170" />
<xsd:element name="MODEMID" type="tns:char10" />
<xsd:element name="SMSID" type="tns:char17" />
<xsd:element name="TEL" type="tns:char20" />
<xsd:element name="TIME" type="tns:time" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
- <xsd:element name="ZSMS_INBOUNDResponse">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="RETURN" type="tns:BAPIRET2" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="ZSMS_INBOUND">
<wsdl:part name="parameters" element="tns:ZSMS_INBOUND" />
</wsdl:message>
- <wsdl:message name="ZSMS_INBOUNDResponse">
<wsdl:part name="parameters" element="tns:ZSMS_INBOUNDResponse" />
</wsdl:message>
- <sap:Feature name="design_0" uri="http://www.sap.com/webas/630/soap/features/authentication/">
- <sap:Property qname="n0:AuthenticationLevel">
<sap:Option value="n0:None" />
</sap:Property>
</sap:Feature>
- <wsdl:portType name="ZSMS_INBOUND">
<sap:useFeature feature="tns:design_0" />
- <wsdl:operation name="ZSMS_INBOUND">
<wsdl:input message="tns:ZSMS_INBOUND" />
<wsdl:output message="tns:ZSMS_INBOUNDResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ZSMS_INBOUNDSoapBinding" type="tns:ZSMS_INBOUND">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="ZSMS_INBOUND">
<soap:operation soapAction="" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ZSMS_INBOUNDService">
- <wsdl:port name="ZSMS_INBOUNDSoapBinding" binding="tns:ZSMS_INBOUNDSoapBinding">
<soap:address location="http://mytest:8080/sap/bc/srt/rfc/sap/ZSMS_INBOUND?sap-client=100" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

I'm now able to consume the web service, but with the error as below:
Warning ! Protocol Implementation [com.sap.engine.services.webservices.jaxrpc.wsdl2java.features.builtin.MessageIdProtocol] could not be loaded (NoClassDefFoundError) !
Error Message is :com/sap/guid/GUIDGeneratorFactory
BAPIRET2 mappingInfo:
TYPE   TYPE   false   false   11
ID   ID   false   false   11
NUMBER   NUMBER   false   false   11
MESSAGE   MESSAGE   false   false   11
LOG_NO   LOG_NO   false   false   11
LOG_MSG_NO   LOG_MSG_NO   false   false   11
MESSAGE_V1   MESSAGE_V1   false   false   11
MESSAGE_V2   MESSAGE_V2   false   false   11
MESSAGE_V3   MESSAGE_V3   false   false   11
MESSAGE_V4   MESSAGE_V4   false   false   11
PARAMETER   PARAMETER   false   false   11
ROW   ROW   false   false   11
FIELD   FIELD   false   false   11
SYSTEM   SYSTEM   false   false   11
My java code is :
public class MyTest {
     public static void main(String[] args){
          try{
                         Stub stub = (Stub)new ZSMS_INBOUNDServiceImpl().getLogicalPort();
                         stub._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY,"http://mytest:8080/sap/bc/srt/rfc/sap/ZSMS_INBOUND?sap-client=100");
                         ZSMS_INBOUND inboundService = (ZSMS_INBOUND) stub;
                         BAPIRET2 str = inboundService.ZSMS_INBOUND(param1,param2,param3,param4,param5,param6);
                         System.out.println(str.toString());
                         }catch (Exception e) {
                              e.printStackTrace();

RESTful Web service in ECC without using netweaver gateway

Can anyone explain how to create RESTful Web service in ECC without using netweaver gateway?

Hi,
Follow this link.
Mobilize ALV Reports - Part 1 Create RESTful service

Web Service on ECC 6.0 SP14

Hi everybody,
I have a message interface on PI 7.0.
I need to generate, from this interface, an asyncronous Web Service on ECC 6.0 SP14 for a direct connection without PI.
How can I do that?
hank you

Hi
if you want to create the web service using the function module do the following steps.
the main requirement for creting the web service using the function module is the function should be RFC enabled.
1. To create web service of this Function Module
Go to Utilities ->More utilities->create a web service->from function module
2. A new wizard will be open to create the web service and click on continue.
3. Enter the web service name (any name that you want to give) and give the short description, select the Endpoint type as Fuinction Module and click on continue.
4. Select the Function Module name that you are using.
5. select the profile as Basic Authentication: SOAP Pro.
6. Press continue to release the web service. The web service is now created
To check the web service Go to the transaction WSADMIN and select the node
SOAP Application for RFC-Complaint FMs and expand the node and select your web service that you have created and expand the web service node up to the last .
Now to test the web service select the last node and click on the web service home page button and it will open the home page.
from this page u will get the wsdl file as well as you can testthe web service.
Thanks
Rinku

Web Services for ECC 5.0 .

Hi ,
I' m new to Web Services in a ECC 5.0 , where do I start ? Any documentation, or web link will be usefull , Thank you .
Also, can Web Services in ECC 5.0 be done "inside" SAP , like in SE80 ?
Or do we have to have Java NWDI ?
The base idea here is to have a "shop" on the Web (Not being SAP), and to use WebServices to Check Stock, Create Orders , Order Status , ... .
Regard's

Hi Christophe,
Yes Webservices can be done in SAP using SE80. To start with you can follow the inside out approach . For this you need an RFC enabled FM or a BAPI which you can readily convert into a webservice . Just go to SE80 look for your RFC or BAPI , Right Click and select Create Webservice from the menu . The resulting wizard will help you with the rest. For more info pls refer to this link. Very useful for people who are totally new to webservices.
<https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f1b585-0a01-0010-3d96-ad0ea291c4f9>.
Best Regards, Girish
PS: Reward points if you are happy with the reply

Advised to disable/reenable web services. Printer console only indicates 'remove web services'.

Four emails stuck in queue. Advised to disable/reenalble 'web services''. Printer displays only
'remove web services'. (HP Officejet Plus 8600 Pro All in one; Windows 7, IE8).

Hello MurrayJ,
Once you remove the web services, the next time you access the web services menu you will be prompted to enable the web services once again. If you have removed we services and are still only seeing this option, then you may need to contact tech support for a semi-full reset.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Testing a ABAP Web Service in ECC 6.0

Hi all,
I am trying create web services from ABAP using a RFC function module in ECC 6.0. Once the service got created and did configurations in SOAMANAGER also. When trying to test the service using the web service navigator it requests for WSDL URL and when provided the URL, i am getting the below error
Cannot download WSDL from http://tuasd06db.tuasw2k.tuaspower.com.sg:8000/sap/bc/srt/wsdl/bndg_DE7C08A93E4CF7F1AF60001A64258BFC/wsdl11/allinone/ws_policy/document?sap-client=220: It is not allowed to access this service. If you believe you should be able to, please contact your system administrator.
As i am new to Web services, is it due to any of the configurations missing or any authorization problem.
P.S: All the relevant services are active in SICF. I have added a new UDDI service registry also. Have entererd the J2EE server details in the System global settings under Technical configuration.
Cheers,
Madhu

Hi,
You need to configure the Web Services Navigator WHITE LIST :
[SAP help|http://help.sap.com/saphelp_nw04s/helpdata/en/b7/d7baaf1481a349ab723e3acd7334b3/frameset.htm]
5. To configure Web Service Navigator White List, in the Allowed Hosts field, enter hostnames or parts of hostnames of remote systems, to which you are allowed to connect via Web Services Navigator. To separate entries, use semicolons (, you can use an asterisk (), or a question mark (?), as wildcards. For example, if you want to enable connection to all remote systems, in the Allowed Hosts field, enter an asterisk ().
I still have one issue standing with web services. Will appreciate if you can help me with that.
[SAP help|/message/5682617#5682617 [original link is broken]]
[SAP Help|http://help.sap.com/saphelp_nw70/helpdata/en/b7/d7baaf1481a349ab723e3acd7334b3/content.htm][Sap Help|http://help.sap.com/saphelp_nw70/helpdata/en/7c/f257422d095542e10000000a1550b0/frameset.htm]
Thanks & regards,
ShreeMohan

Call ABAP Web Service with Java code only

Hi all,
First of all, I am writing script in Adobe form but am not using the one in SAP.
I am trying to call the web service and process the result with script open (i.e. no dataconnection created), because I am trying to do that in a dialog.
I can call a non-SAP web service without problem, but I am not able to call a simple web service with only a single string input, anyone have any example?
Here is the SOAP for input:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:sap-com:document:sap:rfc:functions">
   <soapenv:Header/>
   <soapenv:Body>
      <urn:Z_RFC_GET_STAFF_BANK_INFO>
         <A_STAFF_ID>0123456</A_STAFF_ID>
      </urn:Z_RFC_GET_STAFF_BANK_INFO>
   </soapenv:Body>
</soapenv:Envelope>
Here is my code to call:
     var cURL = "http://some-host-name:port/sap/bc/srt/wsdl/bndg_DEDB492BB032E7F1B09F001CC4FBCEC9/wsdl11/allinone/ws_policy/document?sap-client=300";
     var response = SOAP.request(
          cURL: cURL,
          oRequest: {
               "urn:sap-com:document:sap:rfc:functions:Z_RFC_GET_STAFF_BANK_INFO": {
                    A_STAFF_ID: "0123456"
Regards
Bill

Hello I have the same problem, were you able to execute the WS through the JS code now?
I would like to call an ABAP WS using JavaScript to return complex structures that I would like to manage directly with JS.
I tried with this code and I get the error "RaiseError: Acrobat Raise." when the request is executed:
var WSUrl = "http://<server>:<port>/sap/bc/srt/wsdl/bndg_4D15C75529330AF1E10000000A150429/wsdl11/allinone/ws_policy/document?sap-client=500";
var VendorNumber = xfa.form.DATA.DATAFLOW.SF_HEADER.VENDOR_NUMBER.rawValue;
try {
// Create request structure, read Input out of text field
var request = {
          "urn:sap-com:document:sap:soap:functions:mc-style:ZWsTest" : {ILifnr: VendorNumber}
SOAP.wireDump = true;
// Call web service using SOAP object
var response = SOAP.request ({
        cURL: WSUrl,
        oRequest: request
//        cAction: "urn:sap-com:document:sap:soap:functions:mc-style"
} catch (e) {
    xfa.host.messageBox(e.toString()); //pop-up "TypeError:service.CelsiusToFahrenheit is not a funciton"
with this other code I get the error "SOAPError: CX_ST_MATCH_ELEMENT:XSLT exception.System expected element 'ILifnr'":
try {
    var myProxy = SOAP.connect(WSUrl);
    var result = myProxy.ZWsTest( { ILifnr: VendorNumber } );
    xfa.form.DATA.DATAFLOW.SF_HEADER.E_DESCRIPTION.rawValue = result;
// Display the response in the console:
   console.println("Result is " + result);
} catch (e) {
    xfa.host.messageBox(e.toString()); //pop-up "TypeError:service.CelsiusToFahrenheit is not a funciton"
in the second option, if I make the field ILifnr optional the call is succesfully performed but the parameter is not passed to the WS. So the call is working.
Using stand-alone LiveCycle designer 8.1 and Adobe Reader 8
Any suggestions?
Many thanks,
G.
Edited by: Guillem Mateu Navalón on Jan 13, 2011 1:13 PM

Web Service in ECC ABAP only.

Similar Messages

Maybe you are looking for