Web service problem : Error

Hi,
I created a Web Service in the DTR. It is working fine. I did some changes to the web service and it is working fine in web service navigator. But when i tried to create the model in web dynpro from that web service it is referring to the old service only. Even it is not showing the methods in that new service. I Changed the service name also.
Any one had resolved this type of issue, Please help me out.

Have tried restarting J2EE and redeploy the projects ?.Some times these things helps.

Similar Messages

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

Web Service deploy error

Hello everyone!
I've created a Web Service from a VI. This VI has two inputs values: a String and and Int8 and one single output: an array of DBL values (array of 1x3). Both inputs and outputs are well connected through the Connector Pane.
So, in the Project>> Build Spedifications I've created WS, builded with the Advanced>> Use LabVIEW 8.x file layout option checked, in the WebService(RESTful) settings dialog. The problem appear when I try to deploy this WS. The next error is shown:
Error LabVIEW: (Hex 0xFFFEF84D) LabVIEW Web Services: An error occurred when extracting the deployed Web service. Rebuild the Web service by selecting the "Use LabVIEW 8.x file layout" option in the Advanced tab of the web Service properties dialog.
How can I solve this problem?
Thank you!
Francisco José Gómez López
Software Engineer
Solved!
Go to Solution.

This is exactly what I've done! I build my web services with this option checked. I don't know the reason why the error still persist.
I attach a zip file containing the Web Services VI and other VI needed. If you coult try to build the WS and deploy it...
Francisco José Gómez López
Software Engineer
Attachments:
VIasWS.zip ‏138 KB

Web services build error

Hi All,
I have created and deployed a Java web service banking project now i want use this web services methods into .net clint. For that in .net peoples able to see the list of web services mathods when they are use those methods they face the problem like "Web services build error...". But when the java clint call the same web services methods it works fine.
Im tired to resolved this problem please any one tel me how to resolve this problem.
Thanks,
kalyan N

Both. I deployed the application under the IAS (902) and a standalone (903)environment. The IAS (port 7777) an the standalone oc4j (port 8888) is running with the same error.
P.S. The server is down today for hardware technical reasons

Cannot enable HP Web Services: "Connection error. Check Internet connection."

Hello,
I have a problem with LaserJet setup using Wi-Fi network from windows 7 and 8. The problem as far as I understand is due to inaccessible HP Web Services.
Details:
1, The printer works good by USB.
2. The printer is correctly configured to use Wi-Fi router with right password.
3. It can be successfully ping'ed from Windows
4. In Web browser I can enter on printer's IP
(Serial Numbers are hidden as you recommend, firmware updated)
4. But when I try to Enable HP Web Services, an error message appears:
which is strange, because the printer is connected to the same router as the computers and other devices with automatic configuration (and internet is available without any proxy when I am typing this message):
Please help to resolve this issue.
Thanks,
Fedor

Thanks for clarifying Fedor,
HP Web Services are not related to the pritner installation over the local network, those are two different features.
However that may indicate a nework issue.
First try running the HP Print & Scan Doctor below on one of your PCs:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Does the tool can see your printer throught eh local network?
By clicking the top Network menu and Troubleshoot Firewall, what Firewall software is detected on your system?
Try disabling it and check if that may help.
From teh top Network menu select Show Advanced Information.
What is the IP address of your PC?
I also suggest rebooting the router by unplugging its power for a moment, then reboot the printer and try installing it again.
If the issue persists, what is your router model?
May you see any difference by connecting the printer to your router with an Ethernet cable?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Web service netbeans error

good morning
The problem that I am taking and that when more than create a web service, the variables are different between operations but still providing a web service problem wheel and the other was that before creating a new non wheel.
To the log of error in this web service was running before being created a new web service.
=============================================
Solved!
This and the answer to this problem, simply create each web service each method should take different names of each web service created.
Hugs
PWC1382: Allocate exception for servlet Advogados
javax.servlet.ServletException at
com.sun.enterprise.webservice.JAXWSServlet.doInit(JAXWSServlet.java:260)
at
com.sun.enterprise.webservice.JAXWSServlet.init(JAXWSServlet.java:113)
at
org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1178) at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:832) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:197) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:270) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:339) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:261) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:212) at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:361) at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265) at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106) Caused by: javax.xml.ws.WebServiceException: class servicos.jaxws.Alterar do not have a property of the name Advogado at com.sun.xml.ws.server.sei.EndpointArgumentsBuilder$DocLit.<init>(EndpointArgumentsBuilder.java:495) at com.sun.xml.ws.server.sei.EndpointMethodHandler.createArgumentsBuilder(EndpointMethodHandler.java:133) at com.sun.xml.ws.server.sei.EndpointMethodHandler.<init>(EndpointMethodHandler.java:106) at com.sun.xml.ws.server.sei.PayloadQNameBasedDispatcher.<init>(PayloadQNameBasedDispatcher.java:106) at com.sun.xml.ws.server.sei.EndpointMethodDispatcherGetter.<init>(EndpointMethodDispatcherGetter.java:72) at com.sun.xml.ws.server.sei.SEIInvokerTube.<init>(SEIInvokerTube.java:75) at com.sun.xml.ws.server.EndpointFactory.createEndpoint(EndpointFactory.java:204) at com.sun.xml.ws.api.server.WSEndpoint.create(WSEndpoint.java:467) at com.sun.xml.ws.api.server.WSEndpoint.create(WSEndpoint.java:510) at com.sun.enterprise.webservice.JAXWSServlet.registerEndpoint(JAXWSServlet.java:398) at com.sun.enterprise.webservice.JAXWSServlet.doInit(JAXWSServlet.java:252) ... 29 more Caused by: javax.xml.bind.JAXBException: Advogado is not a valid property on class servicos.jaxws.Alterar at com.sun.xml.bind.v2.runtime.JAXBContextImpl.getElementPropertyAccessor(JAXBContextImpl.java:926) at com.sun.xml.ws.server.sei.EndpointArgumentsBuilder$DocLit.<init>(EndpointArgumentsBuilder.java:484) ... 39 more
Edited by: wagnerbarbosaoliveira on Feb 15, 2008 4:44 AM

Hy!
as we can see, on this stack trace
Caused by: javax.xml.bind.JAXBException: Advogado is not a valid property on class servicos.jaxws.Alterar
At this case it could be two functions with the same name!
All the functions of the webservice must be singular!
So if you have a service Advogado with a function Alterar, cannot exits another webservice with a funciont Alterar.
If anyone know how fix it, it will be helpfull.
Thanks all!

Web Service Task Error

Hi, After successfully testing connection to my source web service, while executing my web service task, I face the following error. Can anyone help me????
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not load the proxy for the specified Web service. The error is: Could not load file or assembly
'iiglotg3.dll' or one of its dependencies. Access is denied..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.loadProxyInAppDomain()
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
Regards,
Njdeh Tahmasian

Could not load file or assembly 'iiglotg3.dll' or one of its dependencies.
Access is denied..
Looks like a permission issue or maybe the assembly don't exists on the server where the package is running; you should check that first.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Web service task: Error when returning an empty array

Hi,
I've encountered an annoying error when using a Web Service Task from an SSIS package in SQL Server Data Tools.
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Index was outside the bounds of the array..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
It seems that the Web Service Task generates this error when returning an empty response from the WSDL. I've seen several topics about this here on MSDN but they are all from 2008-2009 and seem to suggest that
this is a bug. The workaround suggested is using a script task but I would really love to avoid that since my programming skills are lacking.
I'm using Visual studio 2010 with SP1.

Hello,
From my own experience: in all the cases where I had to use SSIS 2008 to retrieve data or send data to Webservices, I had to revert to using Script Tasks or Script components. Whenever I tried with a Web service task, because the job looked simple, I had
to abandon it in favour of Scripts. Keep in mind that I try to make use of the SSIS components as often as possible, before reverting to Scripting. But handling web services is the one exception, where I always use scripts. In SSIS 2012 I did not find
any significant improvement of the Web service task and hence no compelling reason to use it.
Jan D'Hondt - SQL server BI development

SSIS Web Service Task Error with WCF Service

I have read all the other posts on this site and have not been able to resolve my issue.
For testing purposes i created a very simple WCF service that takes no arguments and returns true. That is all it does.
When i create a winform client and instantiate the service i can run my service method and get true back so i know the service works.
I then create a test SSIS package with 1 task, a web service task.
I set the web service tasks properties as follows:
http connection: http://localhost/WCF_SSIS_Prototype/Service1.svc
wsdl file: C:\...\SSIS_WCF_Prototype\Service1.wsdl (I know this is not a valid path, i changed it for posting to forum)
Service: Service1
Method: GetData
Variable: User::BResult
When i run the package i get the following error:
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Method 'ProxyNamespace.Service1.GetData' not found..    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection)    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
I'm not sure why it is saying "Method 'ProxyNamespace.Service1.GetData' not found. It the web service task trying to create a proxy class and naming the proxy class namespace ProxyNamespace?
Any help is greatly appreciated.

Hi,
How do you get around the same issue if your string type is based on a client token ? I downloaded the .wsdl file, was able to see the service name, method and when selecting a method type, I am required to provide a client token which was given
to me. (Name column = clienttoken, Type = string, Value = 2227656 - ec8922 (client token numbers goes there)? I am new to use ssis and need your help please
error message: Web Service Task] Error: An error occurred with the following error message:
"Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: The web serrvice threw an error during method execution. The error is: An error occurred
when verifying security fro the message..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()"
Thank you and regards,
Bili

Urgent web service problem. can not find url of WSDL

Hi all,
I met a web service problem recently.
1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application server as a windows service. It suppose to run all the time. I don't know why the server stop after I log off.
2 For that reason, I tried to migrant my web service from the java application server to Tomcat5.5. I deployed my web service to folder webApps. But I don't know the WSDL url of the web service, which is the web reference for my frent-end c#.net application.
Anybody can give me some idea?
Many thanks

Nobody knows?
Please help me

An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Hi I m getting the below wxpection when i run test browser from workshop. please help me.
An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Thamarai,
Can you provide more information on your jws ? Also can you start the server
from the command line with verbose option. This will cause
weblogic_debug.log to be generated in the domain folder.
Raj Alagumalai
Backline Workshop Support
"Thamarai Selvan" <[email protected]> wrote in message
news:[email protected]..
Hi I m getting the below wxpection when i run test browser from workshop.please help me.
>
An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
java.lang.reflect.InvocationTargetException:null

Invalid Web Service URL Error

I am trying to access define a new webservice system using the WSDL for my local queryview web service. When I put in the WSDL URL it comes back with a "Invalid Web Service URL" error. If I put the URL in the Browser address, it successfully brings back the web service information. Any ideas why I can't define this web service system?
http://<server>:8001/sap/bw/xml/soap/queryview?sap-client=040&wsdl=1.1
<server> is a token for posting concerns...
Thanks!

I am imagining that the BW QUERY_VIEW_DATA web service complies to the Basic Profile 1.0.
And I don't quite understand this part?
<i>In addition, connections to Web services for SAP backend systems must be performed via logical destinations (configured in the SAP J2EE engine with the Visual Administrator) and not via portal systems</i>
Since the QUERY_VIEW_DATA Web Service resides on my BW system is the BW system considered a SAP backend system? Any guidance is greatly appreciated.

"invalid web service URL" error for create web service system

Hi.
I want to call web service in visual composer and try to create Web Service definition.
When I push create button in visual composer, I got "invalid web service URL" error.
My web service is located in SAP ABAP System and I can check WSDL URL in web service homepage.
(http://mycompany.com:8000/sap/bc/srt/rfc/sap/ZTEST?sap-client=500&wsdl=1.1)
Any ideas for this error ?
Regards, Arnold.

Hi
Please can you create the web service in the portal as a portal system, this will work and you will be able to see the service in Visual Composer.
Jarrod Williams

Web Services problem - Server connection error

Hi everybody.
When i try to enable the Web Services i get an error. I am connected to the internet (WiFi) and the connection is ok.
The error is the following:
Server Connection Error
The printer was unable to connect to the server. Check the internet connection and try again, or enter a proxy address.
I do not have a proxy, and the internet connection is ok! Why do i get this problem?
Thank you very much.
This question was solved.
View Solution.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank. <<< The DNS could be your problem. If this does not work, try Google's DNS 8.8.8.8
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Web Services problem - Connection error. Check Internet connection. - 1102w

Hello!
When i try to enable Web Services Setup i get "Connection error. Check Internet connection." error message. I tried to do manual and automatic IP Address Configuration.
Picture:
If you have any idea what should i do, please help me!
Thank you!
Benyke

I did the firmware update utility. Says my firmware is up to date. Still get error.

Web service problem : Error

Similar Messages

Maybe you are looking for