Web Service Runtime error
Hello everyone
In our newly built AP0 ( dev, qa & prod ) systems there are many errors of web service and now the systems are being used by Users.
Error --> 000 SAPSYS WS 4 Error in techincal configuration Error during the retrieval of the logon data store,
checked the below link .
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/4420e292b75e3fe10000000a11466f/frameset.htm
Followed the help and ran the report SRT_ADMIN_CHECK
I see that the RFC is not defined and BG job (SAP_SOAP_RUNTIME_MANAGEMENT) is configured.
The above BG job is not in the standard job list.
Can someone help me to know more about the need of the web service and Can we stop this error by following sapnote 1163844.
Thanks in advance
Medha
Edited by: MedhaD on Sep 2, 2010 8:52 PM
Can someone help me plsss !!!!
Similar Messages
-
Errors configuring the Web Service Runtime
Hi All, I'm trying to configure the Web Service Runtime using SRT_ADMIN on SAP Netweaver Trial 7.02.
I have almost everything working, except three things. I ran SRT_ADMIN_CHECK and i got the following messages:
Checking cross-system settings
bgRFC destination is operational
bgRFC supervisor destination is registered
WSRM event handler is active
Task watcher is active
Data collector for monitoring is not activated
ICF node is active. /sap/bc/srt/
ICF node is active. /sap/bc/srt/wsil
ICF node is active. /sap/bc/srt/wsdl
ICF node is active. /sap/bc/srt/esf_in
ICF node is active. /sap/bc/srt/xip
ICF node is active. /sap/bc/srt/rfc
ICF node does not exist. /sap/bc/srt/pm
ICF node is active. /sap/bc/srt/xip/sap
ICF node does not exist. /sap/bc/srt/scs
Some of the SRT ICF nodes are inactive or do not exist
Ending check of cross-system settings
I checked in SICF and these two services does not exist in the tree. These two unexsting services are a limitation of the trial version?. If not, then how can I create them, if so, what are the parameters? Can I download a note or a manual regarding these two services?. Also how can I activate the data collector?Hi Mauro,
Please check SAP Note 1501709 for the missing nodes issue.
Regarding the Data Collector, I've never seen this activated anywhere before - without any repercussions. You could maybe try doing some research on a background job called SAP_SRT_COLLECTOR_FOR_MONITORING though.
Regards, Trevor -
Web service runtime Config - SRT_ADMIN_CHECK not correct
Hello to all,
I have config the web service runtime as it is shown in note 1043195 or in help.sap.com:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/2bd53ecb69060be10000000a155369/frameset.htm
Now I check the configuration with the Report SRT_ADMIN_CHECK.
The table shows following entries:
Prüfung der systemübergreifenden Einstellungen
Die bgRFC Destination ist nicht betriebsbereit!
Die bgRFC Supervisor Destination ist registriert
WSRM Event Handler ist aktiv
Task Überwacher ist aktiv
Datenkollektor für Monitoring ist nicht aktiviert!
ICF Knoten ist aktiv. /sap/bc/srt/
ICF Knoten ist aktiv. /sap/bc/srt/wsil
ICF Knoten ist aktiv. /sap/bc/srt/wsdl
ICF Knoten ist aktiv. /sap/bc/srt/esf_in
ICF Knoten ist aktiv. /sap/bc/srt/xip
ICF Knoten ist aktiv. /sap/bc/srt/rfc
ICF Knoten existiert nicht. /sap/bc/srt/pm
SRT ICF Knoten sind z.T. nicht aktiv oder nicht vo
Ende der Prüfung der systemübergreifenden Einstellungen
Prüfungen der mandantenabhängigen Einstellungen
Service Destination in Mandant 001 ist nicht konfiguriert
Service Destination in Mandant 066 ist nicht konfiguriert
Ende der Prüfungen der mandantenabhängigen Einstellungen
Mandantenabhängige Verbindungsprüfungen (Destinationen)
Verbindungstest in Mandant 000 gelungen
Service Destination in Mandant 001 nicht registriert
Service Destination in Mandant 066 nicht registriert
Verbindungstest in Mandant 100 gelungen
Ende der mandantenabhängigen Verbindungsprüfungen(Destinationen)
Now my questions:
1. How could I resolved the problem with the bgRFC destination is not operational?
2. How could I activate the Data collector for monitoring?
3. Why do not exists the ICF node /sap/bc/srt/pm and how to resolve this error?
Thanks and regards
MartinHi Martin,
From what I can understand ,It seems like the node /sap/bc is not active in sicf.
Do the following:
1) Logon to the ABAP Server
2) Goto transaction "sicf"
3) It takes you to the maintain services screen, click "execute" button
4) On the next screen, under "default host", you can see sap-->bc
5) Right click node "bc" and select "activate". Activate the entire subtree.
This should hopefully solve your problem.
Regards,
Sangeetha -
Hello everyone!
I've created a Web Service from a VI. This VI has two inputs values: a String and and Int8 and one single output: an array of DBL values (array of 1x3). Both inputs and outputs are well connected through the Connector Pane.
So, in the Project>> Build Spedifications I've created WS, builded with the Advanced>> Use LabVIEW 8.x file layout option checked, in the WebService(RESTful) settings dialog. The problem appear when I try to deploy this WS. The next error is shown:
Error LabVIEW: (Hex 0xFFFEF84D) LabVIEW Web Services: An error occurred when extracting the deployed Web service. Rebuild the Web service by selecting the "Use LabVIEW 8.x file layout" option in the Advanced tab of the web Service properties dialog.
How can I solve this problem?
Thank you!
Francisco José Gómez López
Software Engineer
Solved!
Go to Solution.This is exactly what I've done! I build my web services with this option checked. I don't know the reason why the error still persist.
I attach a zip file containing the Web Services VI and other VI needed. If you coult try to build the WS and deploy it...
Francisco José Gómez López
Software Engineer
Attachments:
VIasWS.zip 138 KB -
Hi All,
I have created and deployed a Java web service banking project now i want use this web services methods into .net clint. For that in .net peoples able to see the list of web services mathods when they are use those methods they face the problem like "Web services build error...". But when the java clint call the same web services methods it works fine.
Im tired to resolved this problem please any one tel me how to resolve this problem.
Thanks,
kalyan NBoth. I deployed the application under the IAS (902) and a standalone (903)environment. The IAS (port 7777) an the standalone oc4j (port 8888) is running with the same error.
P.S. The server is down today for hardware technical reasons -
Hi, After successfully testing connection to my source web service, while executing my web service task, I face the following error. Can anyone help me????
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not load the proxy for the specified Web service. The error is: Could not load file or assembly
'iiglotg3.dll' or one of its dependencies. Access is denied..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.loadProxyInAppDomain()
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
Regards,
Njdeh TahmasianCould not load file or assembly 'iiglotg3.dll' or one of its dependencies.
Access is denied..
Looks like a permission issue or maybe the assembly don't exists on the server where the package is running; you should check that first.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Web service task: Error when returning an empty array
Hi,
I've encountered an annoying error when using a Web Service Task from an SSIS package in SQL Server Data Tools.
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Index was outside the bounds of the array..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
It seems that the Web Service Task generates this error when returning an empty response from the WSDL. I've seen several topics about this here on MSDN but they are all from 2008-2009 and seem to suggest that
this is a bug. The workaround suggested is using a script task but I would really love to avoid that since my programming skills are lacking.
I'm using Visual studio 2010 with SP1.Hello,
From my own experience: in all the cases where I had to use SSIS 2008 to retrieve data or send data to Webservices, I had to revert to using Script Tasks or Script components. Whenever I tried with a Web service task, because the job looked simple, I had
to abandon it in favour of Scripts. Keep in mind that I try to make use of the SSIS components as often as possible, before reverting to Scripting. But handling web services is the one exception, where I always use scripts. In SSIS 2012 I did not find
any significant improvement of the Web service task and hence no compelling reason to use it.
Jan D'Hondt - SQL server BI development -
SSIS Web Service Task Error with WCF Service
I have read all the other posts on this site and have not been able to resolve my issue.
For testing purposes i created a very simple WCF service that takes no arguments and returns true. That is all it does.
When i create a winform client and instantiate the service i can run my service method and get true back so i know the service works.
I then create a test SSIS package with 1 task, a web service task.
I set the web service tasks properties as follows:
http connection: http://localhost/WCF_SSIS_Prototype/Service1.svc
wsdl file: C:\...\SSIS_WCF_Prototype\Service1.wsdl (I know this is not a valid path, i changed it for posting to forum)
Service: Service1
Method: GetData
Variable: User::BResult
When i run the package i get the following error:
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Method 'ProxyNamespace.Service1.GetData' not found.. at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
I'm not sure why it is saying "Method 'ProxyNamespace.Service1.GetData' not found. It the web service task trying to create a proxy class and naming the proxy class namespace ProxyNamespace?
Any help is greatly appreciated.Hi,
How do you get around the same issue if your string type is based on a client token ? I downloaded the .wsdl file, was able to see the service name, method and when selecting a method type, I am required to provide a client token which was given
to me. (Name column = clienttoken, Type = string, Value = 2227656 - ec8922 (client token numbers goes there)? I am new to use ssis and need your help please
error message: Web Service Task] Error: An error occurred with the following error message:
"Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: The web serrvice threw an error during method execution. The error is: An error occurred
when verifying security fro the message..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()"
Thank you and regards,
Bili -
Hi I m getting the below wxpection when i run test browser from workshop. please help me.
An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:nullThamarai,
Can you provide more information on your jws ? Also can you start the server
from the command line with verbose option. This will cause
weblogic_debug.log to be generated in the domain folder.
Raj Alagumalai
Backline Workshop Support
"Thamarai Selvan" <[email protected]> wrote in message
news:[email protected]..
Hi I m getting the below wxpection when i run test browser from workshop.please help me.
>
An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
java.lang.reflect.InvocationTargetException:null -
Hi
How can i change the Web Service runtime in the IDE studio from "Apache Axis" to "Sap NetWeaver"?
Regards
RajaHi Raja,
Are you really using the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloads?rid=/library/uuid/da699d27-0b01-0010-99b0-f11458f31ef2">java EE 5 version</a> from SDN? Because it works as described in there.
-Vladimir -
I am trying to access define a new webservice system using the WSDL for my local queryview web service. When I put in the WSDL URL it comes back with a "Invalid Web Service URL" error. If I put the URL in the Browser address, it successfully brings back the web service information. Any ideas why I can't define this web service system?
http://<server>:8001/sap/bw/xml/soap/queryview?sap-client=040&wsdl=1.1
<server> is a token for posting concerns...
Thanks!I am imagining that the BW QUERY_VIEW_DATA web service complies to the Basic Profile 1.0.
And I don't quite understand this part?
<i>In addition, connections to Web services for SAP backend systems must be performed via logical destinations (configured in the SAP J2EE engine with the Visual Administrator) and not via portal systems</i>
Since the QUERY_VIEW_DATA Web Service resides on my BW system is the BW system considered a SAP backend system? Any guidance is greatly appreciated. -
"invalid web service URL" error for create web service system
Hi.
I want to call web service in visual composer and try to create Web Service definition.
When I push create button in visual composer, I got "invalid web service URL" error.
My web service is located in SAP ABAP System and I can check WSDL URL in web service homepage.
(http://mycompany.com:8000/sap/bc/srt/rfc/sap/ZTEST?sap-client=500&wsdl=1.1)
Any ideas for this error ?
Regards, Arnold.Hi
Please can you create the web service in the portal as a portal system, this will work and you will be able to see the service in Visual Composer.
Jarrod Williams -
Cannot enable HP Web Services: "Connection error. Check Internet connection."
Hello,
I have a problem with LaserJet setup using Wi-Fi network from windows 7 and 8. The problem as far as I understand is due to inaccessible HP Web Services.
Details:
1, The printer works good by USB.
2. The printer is correctly configured to use Wi-Fi router with right password.
3. It can be successfully ping'ed from Windows
4. In Web browser I can enter on printer's IP
(Serial Numbers are hidden as you recommend, firmware updated)
4. But when I try to Enable HP Web Services, an error message appears:
which is strange, because the printer is connected to the same router as the computers and other devices with automatic configuration (and internet is available without any proxy when I am typing this message):
Please help to resolve this issue.
Thanks,
FedorThanks for clarifying Fedor,
HP Web Services are not related to the pritner installation over the local network, those are two different features.
However that may indicate a nework issue.
First try running the HP Print & Scan Doctor below on one of your PCs:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Does the tool can see your printer throught eh local network?
By clicking the top Network menu and Troubleshoot Firewall, what Firewall software is detected on your system?
Try disabling it and check if that may help.
From teh top Network menu select Show Advanced Information.
What is the IP address of your PC?
I also suggest rebooting the router by unplugging its power for a moment, then reboot the printer and try installing it again.
If the issue persists, what is your router model?
May you see any difference by connecting the printer to your router with an Ethernet cable?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Please help me, I'm too much lost because I can not pass ParameterFields to the CrystallReportViewer, It always give me the error
"Object reference not set to an instance of an object."
Only simple report and only one ParameterFields . Nothing else:
The code I pass parameter is copied from the MSDN help as the following:
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void Form1_Load(object sender, EventArgs e)
crystalReportViewer1.ReportSource =
"http://localhost/ec/reports/CrystalReport1Service.asmx";
try
SetParameterFieldInfo("x1", "xxxx");
catch (Exception)
throw;
private void SetParameterFieldInfo(String fieldName, String fieldValue)
CrystalDecisions.Shared.ParameterDiscreteValue parameterDiscreteValue = new CrystalDecisions.Shared.ParameterDiscreteValue();
parameterDiscreteValue.Value = fieldValue;
CrystalDecisions.Shared.ParameterValues currentParameterValues = new CrystalDecisions.Shared.ParameterValues();
currentParameterValues.Add(parameterDiscreteValue);
CrystalDecisions.Shared.ParameterField parameterField = new CrystalDecisions.Shared.ParameterField();
parameterField.Name = fieldName;
parameterField.CurrentValues = currentParameterValues;
//if (parameterField.HasCurrentValue)
// MessageBox.Show(parameterField.);
CrystalDecisions.Shared.ParameterFields parameterFields = new CrystalDecisions.Shared.ParameterFields();
parameterFields.Add(parameterField);
crystalReportViewer1.ParameterFieldInfo = parameterFields;
As you can see from the above code it is very straight. I always get the following exception:
at CrystalDecisions.Windows.Forms.ParameterFieldInfo.get_isDCP()
at CrystalDecisions.Windows.Forms.ParameterValueEditControl.Start()
at CrystalDecisions.Windows.Forms.ParameterUnit.AddEditControl(ParameterValue pv)
at CrystalDecisions.Windows.Forms.ParameterUnit.UpdateControls()
at CrystalDecisions.Windows.Forms.ParameterUnit.set_ParameterFieldInfo(ParameterFieldInfo value)
at CrystalDecisions.Windows.Forms.InteractiveParameterPanel.ShowParameters()
at CrystalDecisions.Windows.Forms.CrystalReportViewer.ShowInteractiveParameters()
at CrystalDecisions.Windows.Forms.CrystalReportViewer.ShowReport()
at CrystalDecisions.Windows.Forms.CrystalReportViewer.OnPaint(PaintEventArgs evtArgs)
at System.Windows.Forms.Control.PaintTransparentBackground(PaintEventArgs e, Rectangle rectangle, Region transparentRegion)
at System.Windows.Forms.ToolStrip.EraseCorners(PaintEventArgs e, Region transparentRegion)
at System.Windows.Forms.ToolStrip.OnPaintBackground(PaintEventArgs e)
at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs)
at System.Windows.Forms.Control.WmPaint(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.SafeNativeMethods.UpdateWindow(HandleRef hWnd)
at System.Windows.Forms.Control.Update()
at System.Windows.Forms.ToolStrip.ClearAllSelectionsExcept(ToolStripItem item)
at System.Windows.Forms.ToolStrip.NotifySelectionChange(ToolStripItem item)
at System.Windows.Forms.ToolStripItem.Select()
at System.Windows.Forms.ToolStrip.ChangeSelection(ToolStripItem nextItem)
at System.Windows.Forms.ToolStrip.SelectNextToolStripItem(ToolStripItem start, Boolean forward)
at System.Windows.Forms.ToolStrip.Select(Boolean directed, Boolean forward)
at System.Windows.Forms.Control.SelectNextControl(Control ctl, Boolean forward, Boolean tabStopOnly, Boolean nested, Boolean wrap)
at System.Windows.Forms.ContainerControl.Select(Boolean directed, Boolean forward)
at System.Windows.Forms.Control.SelectNextControl(Control ctl, Boolean forward, Boolean tabStopOnly, Boolean nested, Boolean wrap)
at System.Windows.Forms.Control.SelectNextControlInternal(Control ctl, Boolean forward, Boolean tabStopOnly, Boolean nested, Boolean wrap)
at System.Windows.Forms.Form.set_Active(Boolean value)
at System.Windows.Forms.Form.WmActivate(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
at System.Windows.Forms.Control.SetVisibleCore(Boolean value)
at System.Windows.Forms.Form.SetVisibleCore(Boolean value)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at testItemCard.Program.Main() in C:\Users\Tariq\Documents\Visual Studio 2008\Projects\testItemCard\testItemCard\Program.cs:line 18
at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Then the report is diplayed propably and the parameters is passed to it but I want to avoid this exception
Please help me to figure out what is wrong, I can send parameters to ReportDocument but when the ReportSource is a Web Service (asmx) It always raise.
For mor explaination:
1- I create a report which has only one string field.
2- The report has only one parameter string olso.
3- I place the parameter in the page header.
4- I create a new Crystal Reports Web Site from Visual Studio 2008.
5- I add the report to the web site.
6- I right click the report and choose "Publish as a web service"
7- I create a windows forms application with CrystalReportViewer1
8- In the form load I set the report source to the auto generated web service using this code only
crystalReportViewer1.ReportSource = "http://localhost/ec/reports/CrystalReport1Service.asmx";
Then I run the application.
CR shows the parameters dialog then raises the exception.
Also if i send the parameter using the crystal report viewer it gives the same exception!!!
My question is If somebody try the steps above then tell me whether the exception is raised in his computer?
Should I make special settings?
Please help me. It is very simple steps. Just do it and tell me the results.
Thanks in advance.I got the following with CR2008 SP2 .NET Runtime on Portuguese Windows 2003. It works fine on English OS though. It seems to be the same issue. The reprot is still displayed, but the ToolBar has a red cross and is not usable. Is there an answer yet?
EXCEPTION >>
NullReferenceExceptionMessage: Referência de objeto não definida para uma instância de um objeto.
Source: CrystalDecisions.Windows.Forms
TargetSite: Boolean get_isDCP()
StackTrace:
em CrystalDecisions.Windows.Forms.ParameterFieldInfo.get_isDCP()
em CrystalDecisions.Windows.Forms.ParameterValueEditControl.Start()
em CrystalDecisions.Windows.Forms.ParameterUnit.AddEditControl(ParameterValue pv)
em CrystalDecisions.Windows.Forms.ParameterUnit.UpdateControls()
em CrystalDecisions.Windows.Forms.ParameterUnit.set_ParameterFieldInfo(ParameterFieldInfo value)
em CrystalDecisions.Windows.Forms.InteractiveParameterPanel.ShowParameters()
em CrystalDecisions.Windows.Forms.CrystalReportViewer.ShowInteractiveParameters()
em CrystalDecisions.Windows.Forms.CrystalReportViewer.ShowReport()
em CrystalDecisions.Windows.Forms.CrystalReportViewer.OnPaint(PaintEventArgs evtArgs)
em System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs)
em System.Windows.Forms.Control.WmPaint(Message& m)
em System.Windows.Forms.Control.WndProc(Message& m)
em System.Windows.Forms.ScrollableControl.WndProc(Message& m)
em System.Windows.Forms.ContainerControl.WndProc(Message& m)
em System.Windows.Forms.UserControl.WndProc(Message& m)
em CrystalDecisions.Windows.Forms.CrystalReportViewer.WndProc(Message& msg)
em System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
em System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
em System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Edited by: Frank88 on Oct 31, 2009 1:06 AM
Edited by: Frank88 on Oct 31, 2009 1:16 AM -
Document Literal Web Service Stub Error
I am using jdeveloper 9.0.3 (necessary because we are doing OAF) and have created a Document Literal Web Service Stub. The stub runs perfectly in Jdeveloper, but when I move it to our 9iAS server (1.0.2.2.2), I get the error that it can not find the class \oracle\jdeveloper\webservices\runtime\WrappedDocLiteralStub.
On my local machine this file is located in jdev-rt.jar, which is in /jdevbin/jdev/lib. Is there a special way to package the web service so that the jar file is included? Or is there a patch I need to apply to the apps server?
Any help would be much appreciated.I am using jdeveloper 9.0.3 (necessary because we are doing OAF) and have created a Document Literal Web Service Stub. The stub runs perfectly in Jdeveloper, but when I move it to our 9iAS server (1.0.2.2.2), I get the error that it can not find the class \oracle\jdeveloper\webservices\runtime\WrappedDocLiteralStub.
On my local machine this file is located in jdev-rt.jar, which is in /jdevbin/jdev/lib. Is there a special way to package the web service so that the jar file is included? Or is there a patch I need to apply to the apps server?
Any help would be much appreciated.
Maybe you are looking for
-
Mac Mini Wireless Speakers Accessories?
Is there a Speaker Accessory for the MacMini that can be run wireless, ie. through Airport Extreme?
-
2 xserves connect to a firewire video device
Hello, I've had a lot of success with this but have had something happen once in a blue moon, so I wanted to check: Say I have 2 xserve's and I have a video device (a canopus Firewire/RCA converter). Right now, I send the canopus a video signal via R
-
Airport base station agent is always running
airport base station agent is always running on my computer and i dont know why. i dont even use a wireless connection. im not in a network. my mac connects to the internet directly through a modem. how can i shut it down.
-
JEditorPane set color for desired chars
How can I set color and other parameters for desired chars in JEditorPane or it's better to use some other class. Thanks.
-
HT1338 kernel panic crashes mac book pro
I have a duo mac book pro 2.93 late 2008/early 2009 I took it to apple because it crashes a lot. They told me that the hardware was fine and did not need repair the hardware. I changed the HDD as it had flaws and reinstalled lion. I mistakenly upgrad