Web service security not configured
Hi All,
We have new PI system 7.1 ehp1, as an initial step installation is done including post installation.I have a task of checking if
everything is in place as the same have to be confirmed to the team which did the installation.
When i open RWB , i could see a message with warning "WS security not configured". aprat from this everything seems to be
fine.
Can anyone guide me on how to set us WS security and what is the use ,importance of having that configured?
Hi,
I dont think you have to configure Message level security configuration manually, i have done instaltion of PI 7.1,i have not seen any step like this.
by default it will come after completion of postinstaltion succesfully.
my advice better to move thread to SAP NetWeaver Administartion forums,you may get good replies./
Regards.,
Raj
Similar Messages
-
Web Service Security not configured on this component.
Hi Experts,
Before configuring the scenario, i went to RWB to check whether the comopnents are in active mode or not.
Integration Engine XID
Business Process Engine XID
Mapping Runtime XID
Adapter Engine XID
Integration Engines
All components are in Green mode Except Integration Engine, The Integration is in yellow mode
and shows the following details.
Details for 'Is Web service security available?'
Web Service Security not configured on this component.
Can you give the solution for this.Hi,
1, While sending idoc from sapR/3 to PI , in r/3 sm58 shows the foll error:
"No service for system SAPQA,client 200 in integration directory"*
Even the Bussiness sytem pointing R/3.
From your initial post, it appears that you are using XID system and from above error, I believe you are trying to send the IDoc from QA system. R3 dev will communicate to PI dev, so verify the partner profile and ports in your IDoc Header settings.
2, When i execute the tcode sm58 in PI it shows the following error:
"Syntax error in program SAPLSXI_AC_CACHE _REFERESH"
I am kinda confused how come sm58 tcode can show an error for this program, as sm58 is for checking the transactional RFCs and SAPLSXI_AC_CACHE_REFERESH is for XI Cache refresh for Alert Category. Might be some one else can explain this.
3, WHEN I EXECUTE THE tcode SXI_CACHE
Under the *STATUS OF RUNTIME CACHE
Unable to refresh cache contents
Error during last attempt toreferesh cache
(red colour triangle leading above both)
Check this SAP Note 764176, might help in your situation.
Worth reading - http://help.sap.com/saphelp_nw04/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
4, Still there is no messages in Message monitoring.
Obviously because of error # 1, you are unable to send IDocs, how come you expect messages to reach PI ... strange, isn't it
Hope this helps.
Regards,
Neetesh -
Web Service security is not set up on this component
Hi Friends,
In RWB, when I click on component monitoring->Integration Engine, I got "Web Service security is not set up on this component"
I want to send message using soap adapter by encrypting and signing it. for this purpose I need to configure the Web Service Security.
Can someone please provide some documentation or link on how to set up this Web Service Security?
thankxHi,
there is a chapter - Security Configuration at Message Level
in XI config guide which specifies everything you need - this is what you need
so I hope no further explanations are necessary
Regards,
Michal Krawczyk -
Configure Web Services Security in PI 7.1
Hi,
I'm getting an error message when using the XI adapter to send encrypted data. I am using SAP PI 7.1 EHP1 SP3.
*Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)
Error during message security handling in outbound channel: Security profile 'Sign and Encrypt Message' *
According to my research I need to get my basis team to configure Web Services Security. I've found the Netweaver 04 configuration guide but I don't think this is relevant. The following help has information on web services security but little or no information.
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/bc872fc60b7006e10000000a155369/frameset.htm
Is anyone able to point me towards the right document?>
Park Saeiam wrote:
> Hi
>
> May be that partner you define Integration System not Application system in Business system. try define to application system.
>
> Thanks
> Park
or try use Business services instead. -
Oracle Service Bus 11gR1 - missing Web Services Security Configuration?
I am trying to configure a web service which uses username token policy.
The below option is missing in Proxy Service --> Security
Web Services Security Configuration
Process WS-Security Header Yes NoIs there anything that needs to be enabled for the above to show up in Proxy Service-->Security.This option was enabled by removing the username token policy from the wsdl file.
Thanks for looking. -
Configuring OpenSSO Web Service Security on Tomcat
Dear All,
I want to configure a simple OpenSSO Web Service security for my application. My web service is on Tomcat and I have used JAX-WS.
Please let me know if there is something we can develop just by configuring OpenSSO properties, instead of writing the WSC and WSP SOAP message handlers.
Regards,
TarakDear All,
I want to configure a simple OpenSSO Web Service security for my application. My web service is on Tomcat and I have used JAX-WS.
Please let me know if there is something we can develop just by configuring OpenSSO properties, instead of writing the WSC and WSP SOAP message handlers.
Regards,
Tarak -
WSUS not working completely, no MMC connect, all web services are not working
Hello all,
I have a problem not sure what causing it or what is the source of it as I am not into WSUS that much...
THe status is as follows:
I have 1 server 2008 sp2 RTM x64, I had WSUS 3.0 SP2 on it since a while, it was working fine until a week ago, when I started receiving the below messages in the event viewer
I have spent too much time trying to trace or troubleshoot this issue, but all I got was to check the registry and check permissions on the temp folder and other folders, I have done complete removal with the database for the old WSUS and reinstalled it
again but I got the same problem
Nothing strange and no problems happened on the server perior to this issue, it just happened...
Any help will be appreciated
Regards
============== MSG 1 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:52:54 PM
Event ID: 7053
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
<head>
<title>Security Exception</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Security Exception</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact
your system administrator or change the application's trust level in the configuration file.
<br><br>
<b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
<b>Source Error:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
</td>
</tr>
</table>
<br>
<b>Stack Trace:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
ASP.global_asax..ctor() +0
</pre></code>
</td>
</tr>
</table>
<br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
</font>
</body>
</html>
<!--
[SecurityException]: That assembly does not allow partially trusted callers.
at ASP.global_asax..ctor()
[TargetInvocationException]: Exception has been thrown by the target of an invocation.
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context)
at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
[HttpException]: Exception has been thrown by the target of an invocation.
at System.Web.HttpRuntime.FirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
-->
Source
Microsoft.UpdateServices.Administration
Stack Trace:
at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">7053</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:52:54.000Z" />
<EventRecordID>884368</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
<head>
<title>Security Exception</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Security Exception</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission
please contact your system administrator or change the application's trust level in the configuration file.
<br><br>
<b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
<b>Source Error:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
</td>
</tr>
</table>
<br>
<b>Stack Trace:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
ASP.global_asax..ctor() +0
</pre></code>
</td>
</tr>
</table>
<br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
</font>
</body>
</html>
<!--
[SecurityException]: That assembly does not allow partially trusted callers.
at ASP.global_asax..ctor()
[TargetInvocationException]: Exception has been thrown by the target of an invocation.
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context)
at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
[HttpException]: Exception has been thrown by the target of an invocation.
at System.Web.HttpRuntime.FirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
-->
Source
Microsoft.UpdateServices.Administration
Stack Trace:
at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()</Data>
</EventData>
</Event>
============== MSG 2 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 13051
Task Category: 6
Level: Warning
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
No client computers have ever contacted the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">13051</EventID>
<Level>3</Level>
<Task>6</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884373</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>No client computers have ever contacted the server.</Data>
</EventData>
</Event>
============== MSG 3 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12002
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The Reporting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12002</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884374</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The Reporting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 4 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12012
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The API Remoting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12012</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884375</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The API Remoting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 5 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12032
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The Server Synchronization Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12032</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884376</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The Server Synchronization Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 6 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12022
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The Client Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12022</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884377</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The Client Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 7 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12042
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The SimpleAuth Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12042</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884378</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The SimpleAuth Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 8 ==============
Log Name: Application
Source: Windows Server Update Services
Date: 9/21/2011 1:53:01 PM
Event ID: 12052
Task Category: 9
Level: Error
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
The DSS Authentication Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">12052</EventID>
<Level>2</Level>
<Task>9</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
<EventRecordID>884379</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOAMIN.local</Computer>
<Security />
</System>
<EventData>
<Data>The DSS Authentication Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 9 ==============
Log Name: Application
Source: ASP.NET 2.0.50727.0
Date: 9/21/2011 1:53:09 PM
Event ID: 1314
Task Category: Web Event
Level: Information
Keywords: Classic
User: N/A
Computer: APP-SVR.DOMAIN.local
Description:
Event code: 4010
Event message: An unhandled security exception has occurred.
Event time: 9/21/2011 1:53:09 PM
Event time (UTC): 9/21/2011 10:53:09 AM
Event ID: 11b96ca285fa46d2a05d38e2e9b168af
Event sequence: 1
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820
Trust level: High
Application Virtual Path: /ApiRemoting30
Application Path: C:\Program Files\Update Services\WebServices\ApiRemoting30\
Machine name: APP-SVR
Process information:
Process ID: 8332
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Request information:
Request URL:
http://app-svr:8530/ApiRemoting30/WebService.asmx
Request path: /ApiRemoting30/WebService.asmx
User host address: 192.168.5.22
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITY\NETWORK SERVICE
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ASP.NET 2.0.50727.0" />
<EventID Qualifiers="16384">1314</EventID>
<Level>4</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-09-21T10:53:09.000Z" />
<EventRecordID>884380</EventRecordID>
<Channel>Application</Channel>
<Computer>APP-SVR.DOMAIN.local</Computer>
<Security />
</System>
<EventData>
<Data>4010</Data>
<Data>An unhandled security exception has occurred.</Data>
<Data>9/21/2011 1:53:09 PM</Data>
<Data>9/21/2011 10:53:09 AM</Data>
<Data>11b96ca285fa46d2a05d38e2e9b168af</Data>
<Data>1</Data>
<Data>1</Data>
<Data>0</Data>
<Data>/LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820</Data>
<Data>High</Data>
<Data>/ApiRemoting30</Data>
<Data>C:\Program Files\Update Services\WebServices\ApiRemoting30\</Data>
<Data>APP-SVR</Data>
<Data>
</Data>
<Data>8332</Data>
<Data>w3wp.exe</Data>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data>http://app-svr:8530/ApiRemoting30/WebService.asmx</Data>
<Data>/ApiRemoting30/WebService.asmx</Data>
<Data>192.168.5.22</Data>
<Data>
</Data>
<Data>False</Data>
<Data>
</Data>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
</EventData>
</Event>
Saleh RamadanSo, in reality, this issue has nothing at all to do with "it was working; now it is not", because you've destroyed all of the evidence that would exist in a "was working; now is not" scenario. What we really have here is a NEW installation that has failed.
So, from the perspective of a NEW installation that is not working...
Are there any other roles, features, services, or applications installed on this server?
Did you install the Web Server Role exactly as described in the documentation?
Did you install the WSUS Role exactly as described in the documentation?
Were there any other roles, features, services, or applications installed onto this server
after your original (working) installation of WSUS?
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2011)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com
Oh, well, I have red and followed the documentation exactly step-by-step on the technet library, and I can guarantee you nothing went wrong because this is not my first installation for it
When I told you about the old damaged installation and the new installation which is also failed and showed me the same symptoms as the old one, I was sure that nothing wrong with the WSUS itself, but rather it is something wrong with the environment
Answering to your above questions, the answer for all is that: that server is only used for WSUS, nothing more
Anyway, I have managed to restore the service thanks to your previous reply where you point to the CONFIG folder inside the NET framework folder, I checked the files in there, some were changed to the date I think has stopped the service, so I repaired the
NET framework 2, and restarted
It is working fine now and syncing with the update server
Saleh Ramadan -
Details for 'Is Web service security available?'
Hi i am working on scenario rfc to webservice.Its as secued webserivce i need to do ssl configuration.
In component monitoring..for the integration engine its in yellow...
Details for 'Is Web service security available?'
Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
can any one please help me out..
Thanks
sriramI have already installed certificates on the j2ee engine & i have given the paramaters for keystore entry & keystore value.Still i have the same error
In component monitoring
For integration engine
Details for 'Is Web service security available?'
Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
In message monitoring
Audit Log for Message: f614df00-e9e0-11da-95ef-0004ac577b32
Time Stamp Status Description
2006-05-22 15:18:58 Success The message was successfully received by the messaging system. Profile: XI URL: http://saptst01:51000/MessagingSystem/receive/AFW/XI
2006-05-22 15:18:58 Success Using connection AFW. Trying to put the message into the request queue.
2006-05-22 15:18:58 Success Message successfully put into the queue.
2006-05-22 15:18:58 Success The message was successfully retrieved from the request queue.
2006-05-22 15:18:58 Success The message status set to DLNG.
2006-05-22 15:18:58 Success Delivering to channel: ZCH_VERISIGNPPGR
2006-05-22 15:18:58 Success SOAP: request message entering the adapter
2006-05-22 15:18:58 Success SOAP: call failed
2006-05-22 15:18:58 Error SOAP: error occured: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter
2006-05-22 15:18:58 Error Exception caught by adapter framework: Peer sent alert: Alert Fatal: illegal parameter
Can any one please help me out.
Thanks
sriram -
Is Web service security available?
Dear Experts,
In RWB, when i click on Integration Engine(in component monitoring) i get a yellow triangle next to it instead of green. Result of self test says that
Is Web service security available?
"Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)".
Can u guys tell me the reason behing this.
Thanks & regards.Hi,
Check if you have selected any security level for the WebService or may be it is across the firewall. Probably you need to install the related certificates and have to configure the SSL layer.
refer
You need to setup SSL layer for HTTPS endpoint.
Possible HTTP security levels are (in ascending order):
HTTP without SSL
HTTP with SSL (= HTTPS), but without client authentication
HTTP with SSL (= HTTPS) and with client authentication
Use transaction STRUST to set up an SAP Web AS ABAP engine as HTTPS server. If not already done, you have to import a certificate generated by a trusted CA identifying the SAP Web AS. In addition, you have to enable the HTTPS port in the ICM (Internet Communication Manager).
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ff/7932e4e9c51c4fa596c69e21151c7d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/13/4a3ad42ae78e4ca256861e078b4160/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7cddde33ff05cae10000000a128c20/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0a/0a2e0fef6211d3a6510000e835363f/content.htm
General guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09f3d8e-d478-2910-9eb8-caa6516dd7d9
Message level security
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Thanks
Swarup -
RWB - Integration Engine self test - web service security and proxy
Hi,
I am working with a new installation of PI 7.0. In the runtime workbench, under self test for integration engine, there is this error/warning:
""Details for 'Is Web service security available?'
Communication error: Proxy calls are not permitted on sender or receiver side on the IS (client)""
What exactly is the problem? Is there any additional configuration needed within PI to use proxies? We do not have the cryptographic toolkit installed. Is that nesseccary to work with proxies? We have done several other scenarios with RFC, MAIL, HTTP, etc and they work fine. If anyone else had this problem and managed to fix it, please let me know..
Thanks,
LasyaYou can ignore this error. It is simply a warning that says message level security has not been configured. Without message security too, you can do proxy communication.
But, if you want to configure messag level security, go through XI Config guide section 12.4.
Message was edited by: Jay -
Web Services Security is empty in Visual Administrator
Hi Everybody,
Please Help me! I'm configuring the Adobe Document Service but in the step where I have to configure something in the WebServicesSecurity It appears empty in the runtime tab.
I have read this links, but It didn't work.
ADOBE + Web Services Security
Re: Web Services Security
I'll appreciate any help!!!
Yolanda.Hello vamshi,
As you have suggeseted, I followed the notes and changed the following paramters.The system is 64bit and hence the values are adjusted according to the server.
-Djco.jarm=1
-Dsun.io.useCanonCaches=false
-Djava.awt.headless=true
-XX:SoftRefLRUPolicyMSPerMB=1
-verbose:gc
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-Xss2m
-Xms2048M
-Xmx2048M
-XX:MaxNewSize=320M
-XX:NewSize=320M
-XX:MaxPermSize=512M
-XX:PermSize=512M
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-XX:+UseParNewGC
-XX:+UseTLAB
-XX:+HeapDumpOnCtrlBreak
The heap size for java is 2048
But still i am getting the ping time out. Connection to server is lost.
Kindly let me know,
Regards
Vijay -
"Define Web Service" - Security Issues
Hello all,
I have successfully defined a Web service with the wizard in ID. So I already have my WSDL file.
Now, I need to use this WSDL file from a Web Application that exposed to all public internet.
Now my question is, how is security managed for this web service? I mean, if the web service is exposed to any user of the web application in the internet, how can I assure that, the information in the WSDL file will not be used to access the XI Server with out authorization?
Who should be in charge of the security, the web application? the web service? or xi?
Thanks,
FelipeIf you are using the SOAP Adapter for receiving the information it provides the features like
1. HTTP without Client Authentication
2. HTTP with Client Authentication
Even you can select Security Prameters like
1. Web Service Security
2. S/MIME
If you configure all this then which other kind of security you are looking for.
Gaurav Jain
Reward Point if answer is helpful -
Issue with Web Service Security
Dear Forum Members and Readers,
I am a beginner to Web Services, and facing an issue with WS-Security.
My issue seemingly is quite specific to my projects though, It will be great if you can provide me your views.
Context Description:
I am developing a Java Web Service application that is deployed on JBoss Application Server.
This application will communicate with two other applications those are not deployed in same JBoss Application Server.
These 2 applications are third party applications, one is C++ based web services and other is Java based web services.
My application gives a call to Third Party Application1 and receives the response back form it. It then passes this received response to Third Party Application 2.
Issue Description:
I now need to enable https paradigm among these 3 applications. (I need to implement web service security model here)
I started with looking in to JBoss specific WS-Security but found it not suitable in my case, as it requires to configure both the client and server. I have the control over my application but not on other 2 third party applications.
To this extent, I am unable to identify a solution that can address my issue.
Can anybody please provide me with initial thoughts or any reference material that might help me to give this a start.
Any clue will be highly appreciated!
Thanks in advance
Mukulmukul.object wrote:
Actually, my SOAP messages contains some critical information that needs to be encrypted.You think that its critical information however your third party doesn't. If they would have had same thought they would have enabled the security. As I said earlier, you will have to discuss this with them.
Another solution (however I don't know the viability in your case) could be to deploy one component before each third party service. Your web service will call this new component (Which is installed in their environment i.e. local to third party web service) and new component will forward the request to third party service. Now you can apply security/encryption/decryption between your web service and your component.
I have had a look in to XMLEncrytion using that I can encrypt my SOAP messages but I wonder how would other tools decrypt that.My above comments answers this.
Is there anyway I can encrypt my SOAP messages (without having to customize third party tools) in this scenario ??My above comments answers this. -
How to make my Portal Web Service SECURED?
Hi Experts,
I created one portal Service and exposed it as Portal Web Service.
Everything is working fine, as i deployed my Portal Web Service on to the SAP J2EE Engine ie SAP Server.
I m able to access functions of Web Service from my StandAlone Java Application.
but the problem is my Web Service is not SECURED.
How can i make my Portal Web Service SECURED?
Please help me out.
Help will be appreciated and rewarded!!!!!user13046122 wrote:
I have an old pl/sql "helper" package, originally written to make SOAP Web Service calls from the database - it uses UTL_HTTP to invoke the target services.
I now need to make SOAP Web Service calls - from an 8.1.7.4 database
But the version of UTL_HTTP inside 8.1.7.4 does not contain the functions needed in the helper package
Can anybody suggest a means of making SOAP Web Service calls from an 8.1.7.4 database ?I think you'll be very lucky to find anyone here who still has access to a version of Oracle that is that old.... I mean... that's like what? 15 years old at least? I'm surprised you've still got hardware that can run that.
It would probably help if you could post what code you've got and explain which function(s) it's complaining about, as I doubt people will want to guess. -
12002 The Reporting Web Service is not working.
Hi :)
I have WSUS on Windows Server 2012 std. with Internal Database. Today I've installed 7 updates from patch tuesday and after restart I've got
error 12002 The Reporting Web Service is not working
I can see now that updatet clients can not report their status anymore :(
What's up ? Any suggestion ?
Best regards
NenadHi,
I would start by verifying that the /ReportingWebService resource is properly configured in IIS.
Correct configurations can be found in the WSUS Technical Reference Guide: IIS
Settings for WSUS 3.0 SP2 Web Services.
Also,Under ReportingWebService
Made sure all were set to disabled except for Anonymous Authentication
Anonymous Authentication Enabled
ASP .NET Impersonation Disabled
Basic Authentication Disabled
Forms Authentication Disabled
Windows Authentication Disabled
Regards,
Clarence
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Maybe you are looking for
-
Changing the gallery name doesn't "stick."
Hello, I have one gallery (all you can presently have with iPhoto 8) with a few password-protected albums. When I use iPhoto preferences to change the name of the gallery, previous gallery names appear on both the gallery and album pages of idisk. Em
-
Adapter Specific Identifiers of a business system
I created a business system and a sender RFC adapter under that. RFC destination is working fine now from the R/3 system now. When I go to the business system Adapter specific identifiers the R/3 system ID and Client are coming blank ; tried to compa
-
Tagging Acronyms/Abbreviations in Indesign for an accessible pdf
I am trying to figure out the proper way to tag an acronym in an InDesign file to be properly read aloud in accessible pdf. Currently as it stands, the acronymns are being read as words instead of individual letters ( ex. APR is trying to be pronounc
-
I keep getting this message the past week when I try to copy/paste text to Pages or upload a picture to a website chat forum. I don't know what it means, or how to correct it. I'm running a 2009 iMac desktop with OSX Lion 10.7.3 with 2 GB Any help
-
Native File Format -Support (~) Sign
Hi All I am trying to write file using ftp adapter where the delimited option for me is Tild(~) sign.Under Native format builder the steps 5 of 7 options for comma,semicolon,single space and tab. But there is not option to select ~. Please help me to