Web Service Security Question

I have created a web service in the NetWeaver portal using a Portal Service.  I have marked the service as requiring basic http authentication.  However, when I call the web service from the Enterprise Portal Web Services Checker in NWDS it just let's me supply the params of the web service and no authentication.  Any ideas?
I also noticed that my web service does not appear under the Web Services Container or Web Services Security section in Visual Administrator.  Anybody have any idea why this is?
Thanks in advance.
Curtis

Hi Curtis,
My guess is that since you are logged into the Portal while calling this web service, it will use the current session cookie to authenticate automatically. I'm not sure on the second question, tried a restart?
Regards,
Raj

Similar Messages

  • Web Service Security using OpenSSO

    Hi,
    I have a question regarding the usage of the OpenSSO in order to secure web services.
    I have read the documentation and it states the OpenSSO enables web service security.
    However, in the docs the main scenario is where the WSC and WSP are protected by the agent.
    In my scenario, I would like to use agents only on the WSP side, but leave the implementation of the client side open to the partners. Partners will have the interface from the OpenSSO for the authentication and saml token retrieval. The client will have to create soap by itself. This is the case since the WSC are to be standalone applications on client computers.
    To set the actual question; what are web service interfaces that OpenSSO as a STS offers for authentication and saml token issuance. Is there same sort of a referential architecture for this case where only the STS and WSP can be configured and the WSC implementation of the WSS left to the partner. Any pointers and directions would be appreciated.
    Thanks!

    Hi
    Thanks for your reply
    I downloaded OC4J 10.1.2.0.2 and ran it as as a standalone server.
    I read the blog you linked and made the changes to the web.xml for the webservice. All of which I was able to do using the property palette in jdev 10.1.2.1.0.
    I deployed my webservice to my oc4j standalone server and it appeared as a new application. I editied the orion-web.xml for the new application manually.
    When I point my browser at the webservice I get the test page which allows me to pass parameters to the webserive. I invoke the webservice (which does a HTTP GET according to the test page) and the webservice runs. No user and password is needed though.
    What is the expected behaviour? I was hoping that the webservice wouldn't run until I supplied the admin user name and password
    paul

  • Web Service/ JDBC question

    Hi,
    I have to design an automatic -and periodic- process that performs next tasks:
    1) Read Oracle table to build a XML file
    2) Connect with a Web Service and send the XML. (In the specification says that SOAP with attachments is not supported , so we have to use a "proxy J2EE client" to interact with this web service)
    3) Also this web service uses security sign with a X.509 v3 certificate in BASE64, which must be passed as a 'string' parameter when is invoked.
    I'm new in these subjects, and I need some help, my questions:
    1) Is it possible to define an automatic process with JDEVELOPER that connects to the DB, build the XML file and invoke the Web service?
    2) How could I make this proccess automatic and periodic, for example every friday.
    3) What are the tools I have to use:
    3.1.- To Connect with DB -> JDBC?
    3.2.- To Build XML, programmatically? or is there any tool?
    3.3.- To define it as a periodic proccess??
    4) Others alternatives? Is it possible to develope this directly in PL/SQL as a job in ORACLE?
    thanks in advance...

    This is what we call "Database Web Services" covered in chapter 15 of my book http://db360.blogspot.com/2006/08/oracle-database-programming-using-java_01.html
    See also
    a) Oracle Application Server Web Services Developer’s Guide 10g Release 3 (10.1.3.x) for a complete coverage of Oracle AS Web Services Security.
    b) Calling External Web services from stored procedure (it contains an example of batch scheduling for call-out but you are looking for call-in): http://www.oracle.com/technology/sample_code/tech/java/jsp/samples/wsclient/Readme.html
    Kuassi

  • "Define Web Service" - Security Issues

    Hello all,
    I have successfully defined a Web service with the wizard in ID. So I already have my WSDL file.
    Now, I need to use this WSDL file from a Web Application that exposed to all public internet. 
    Now my question is, how is security managed for this web service? I mean, if the web service is exposed to any user of the web application in the internet, how can I assure that, the information in the WSDL file will not be used to access the XI Server with out authorization?
    Who should be in charge of the security, the web application? the web service? or xi?
    Thanks,
    Felipe

    If you are using the SOAP Adapter for receiving the information it provides the features like
    1. HTTP without Client Authentication
    2. HTTP with Client Authentication
    Even you can select Security Prameters like
    1. Web Service Security
    2. S/MIME
    If you configure all this then which other kind of security you are looking for.
    Gaurav Jain
    Reward Point if answer is helpful

  • Web Services Security - What to expect

    I am reviewing a vendor�s product that will run on a J2EE platform. One of the features of this product is a web services framework for developing web services. What I want to assess is how well they support web services security. They may say they rely on the underlying application server to �do the security stuff� � is this enough?
    A further question is: what should I expect from different J2EE application server vendors in the area of security. Is there reasonable compliance between them or is there still an amount of proprietary implementation, that will ultimately result in application server lock-in, should I need a particular security feature?

    I may have posted this to the wrong area so I have also now posted it to the web services technology forum (although the layout of the forums made this area look as though it was a sub set of web services). So excuse the duae posting, although arguably it is a portability issue standalone also.

  • How to make my Portal Web Service SECURED?

    Hi Experts,
    I created one portal Service and exposed it as Portal Web Service.
    Everything is working fine, as i deployed my Portal Web Service on to the SAP J2EE Engine ie SAP Server.
    I m able to access functions of Web Service from my StandAlone Java Application.
    but the problem is my Web Service is not SECURED.
    How can i make my Portal Web Service SECURED?
    Please help me out.
    Help will be appreciated and rewarded!!!!!

    user13046122 wrote:
    I have an old pl/sql "helper" package, originally written to make SOAP Web Service calls from the database - it uses UTL_HTTP to invoke the target services.
    I now need to make SOAP Web Service calls - from an 8.1.7.4 database
    But the version of UTL_HTTP inside 8.1.7.4 does not contain the functions needed in the helper package
    Can anybody suggest a means of making SOAP Web Service calls from an 8.1.7.4 database ?I think you'll be very lucky to find anyone here who still has access to a version of Oracle that is that old.... I mean... that's like what? 15 years old at least? I'm surprised you've still got hardware that can run that.
    It would probably help if you could post what code you've got and explain which function(s) it's complaining about, as I doubt people will want to guess.

  • Web Service Security with SAML - Invalid XML signature

    Hello together,
    we want to build a scenario where we want to use Web Service Security  with SAML.
    The scenario will be
    WS Client (Java Application) -> WS Adapter -> Integration Engine ->  WS Adapter-> CRM (Web AS ABAP 7.01 SP 3)
    SAP PI release is 7.11 (SP Level 4)
    We want to use the SAML Authentification from WS Client to PI and from PI to Web AS ABAP.
    The SAML authentifications between the WS Client and PI works when there is no SAML auth between PI and CRM.
    But we get following error at calling the CRM system when we want to communicate with SAML:
      <E_TEXT>CX_WS_SECURITY_FAULT:Invalid XML signature</E_TEXT>
    Has somebody an idea of the possible reason for the error.
    Thanks in advance
    Stefan

    Error Messages in the Trace/Log Viewer:
    CX_WS_SECURITY_FAULT : Invalid XML signature | program: CL_ST_CRYPTO==================CP include: CL_ST_CRYPTO==================CM00G line: 48
    A SOAP Runtime Core Exception occurred in method CL_ST_CRYPTO==================CM00G of class CL_ST_CRYPTO==================CP at position id 48  with internal error id 1001  and error text CX_WS_SECURITY_FAULT:Invalid XML signature (fault location is 1  ).
    Invalid XML signature

  • Details for 'Is Web service security available?'

    Hi i am working on scenario rfc to webservice.Its as secued webserivce i need to do ssl configuration.
    In component monitoring..for the integration engine its in yellow...
    Details for 'Is Web service security available?'
    Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
    can any one please help me out..
    Thanks
    sriram

    I have already installed certificates on the j2ee engine & i have given the paramaters for keystore entry & keystore value.Still i have the same error
    In component monitoring
    For integration engine
    Details for 'Is Web service security available?'
    Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client) 
    In message monitoring
    Audit Log for Message: f614df00-e9e0-11da-95ef-0004ac577b32
    Time Stamp Status Description
    2006-05-22 15:18:58 Success The message was successfully received by the messaging system. Profile: XI URL: http://saptst01:51000/MessagingSystem/receive/AFW/XI
    2006-05-22 15:18:58 Success Using connection AFW. Trying to put the message into the request queue.
    2006-05-22 15:18:58 Success Message successfully put into the queue.
    2006-05-22 15:18:58 Success The message was successfully retrieved from the request queue.
    2006-05-22 15:18:58 Success The message status set to DLNG.
    2006-05-22 15:18:58 Success Delivering to channel: ZCH_VERISIGNPPGR
    2006-05-22 15:18:58 Success SOAP: request message entering the adapter
    2006-05-22 15:18:58 Success SOAP: call failed
    2006-05-22 15:18:58 Error SOAP: error occured: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter
    2006-05-22 15:18:58 Error Exception caught by adapter framework: Peer sent alert: Alert Fatal: illegal parameter
    Can any one please help me out.
    Thanks
    sriram

  • Web Services Security Problem

    hi all,
    I am publishling the BC4J Component(Application module) as a webservice. The particular web service method will be as follows. The method is returning the element object.
    public Element getEmp(String searchString,String selectedItem, int pageNoInput)
    return (Element)hits.writeXML(1,Row.XML_OPT_LIMIT_RANGE);
    I am securing the web service by the instructions which are given in the following link
    http://www.oracle.com/technology/products/jdev/howtos/1013/wssecure/10gwssecurity_howto.html
    Then i am creating the proxy client. when i run the proxy client it gives me the following exception
    javax.xml.rpc.soap.SOAPFaultException: SOAP must understand error: {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security
         at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:553)
         at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:390)
         at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:111)
         at aptuitclient.runtime.ReviewProtocolAppModuleServiceSoapHttp_Stub.getEmp(ReviewProtocolAppModuleServiceSoapHttp_Stub.java:91)
         at bc4jaswebservice.server.webservice.ReviewProtocolAppModuleServiceSoapHttpPortClient.getEmp(ReviewProtocolAppModuleServiceSoapHttpPortClient.java:58)
         at bc4jaswebservice.server.webservice.ReviewProtocolAppModuleServiceSoapHttpPortClient.main(ReviewProtocolAppModuleServiceSoapHttpPortClient.java:44)
    When i am removing the security for the web service it is giving the Element object.
    The Problem is when i am securing the web service it is giving the above said exception.
    Please help me regarding this... this is very urgent...
    rgds
    Parameswaran

    Hello,
    When you are using WS-Security you need to secure the client too. So in your case the client is the ADF Data Control.
    The way you should configure your data control is documented here:
    - Web Services Security and ADF Data Control
    Regards
    Tugdual Grall

  • Web service security in PI

    Mine is PROXY to SOAP asynchronous.
    PI consumes the service, my requirement is when PI calls the service I need to pass web service security in SOAP header.
    so that at receiver statem they can validate the user using these.
    When i am calling webservice from soapui with the header parameters
    Username , Password and Password Type - PasswordText , it is able to get results. The soapui tool automatically adds the following in the soap header -
    <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
    <wsse:UsernameToken wsu:Id="UsernameToken-9368150" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <wsse:Username>xxxxx</wsse:Username>
    <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">xxxxx</wsse:Password>
    <wsse:Nonce>aOA1P6t2hJPRyuraQ/IliQ==</wsse:Nonce>
    <wsu:Created>2009-07-10T14:58:33.781Z</wsu:Created>
    </wsse:UsernameToken>
    </wsse:Security>
    What configuration needs to be done in PI.

    I got this in Runtime work bench
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    - <SOAP:Header>
    - <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" SOAP:mustUnderstand="1" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <sap:MessageClass>ApplicationMessage</sap:MessageClass>
      <sap:ProcessingMode>asynchronous</sap:ProcessingMode>
      <sap:MessageId>4a3a1651-b19b-0199-e100-8000aa064690</sap:MessageId>
      <sap:TimeSent>2009-07-15T15:46:10Z</sap:TimeSent>
    - <sap:Sender>
      <sap:Party agency="" scheme="" />
      <sap:Service>test2310</sap:Service>
      </sap:Sender>
    - <sap:Receiver>
      <sap:Party agency="" scheme="" />
      <sap:Service>test_serivce</sap:Service>
      </sap:Receiver>
      <sap:Interface namespace="urn:Publish">msgIF_publish_I_Async</sap:Interface>
      </sap:Main>
    - <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
      <sap:QualityOfService>ExactlyOnce</sap:QualityOfService>
      </sap:ReliableMessaging>
    - <sap:Diagnostic xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
      <sap:TraceLevel>Fatal</sap:TraceLevel>
      <sap:Logging>On</sap:Logging>
      </sap:Diagnostic>
    - <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
    - <sap:Hop timeStamp="2009-07-15T15:46:10Z" wasRead="false">
      <sap:Engine type="BS">test_serivce</sap:Engine>
      <sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
      <sap:MessageId>4a3a1651-b19b-0199-e100-8000aa064690</sap:MessageId>
      <sap:Info>3.0</sap:Info>
      </sap:Hop>
    - <sap:Hop timeStamp="2009-07-15T15:46:11Z" wasRead="false">
      <sap:Engine type="IS">is.68.devai020</sap:Engine>
      <sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
      <sap:MessageId>4a3a1651-b19b-0199-e100-8000aa064690</sap:MessageId>
      <sap:Info>3.0</sap:Info>
      </sap:Hop>
    - <sap:Hop timeStamp="2009-07-15T15:46:12Z" wasRead="false">
      <sap:Engine type="AE">af.dxi.devai020</sap:Engine>
      <sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
      <sap:MessageId>4a3a1651-b19b-0199-e100-8000aa064690</sap:MessageId>
      </sap:Hop>
      </sap:HopList>
      </SOAP:Header>
    Edited by: Vamsi on Jul 15, 2009 7:06 PM

  • Web Service security is not set up on this component

    Hi Friends,
    In RWB, when I click on component monitoring->Integration Engine, I got "Web Service security is not set up on this component"
    I want to send message using soap adapter by encrypting and signing it. for this purpose I need to configure the Web Service Security.
    Can someone please provide some documentation or link on how to set up this Web Service Security?
    thankx

    Hi,
    there is a chapter - Security Configuration at Message Level
    in XI config guide which specifies everything you need - this is what you need
    so I hope no further explanations are necessary
    Regards,
    Michal Krawczyk

  • Is Web service security available?

    Dear Experts,
        In RWB, when i click on Integration Engine(in component monitoring) i get a yellow triangle next to it instead of green. Result of self test says that
    Is Web service security available?
    "Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)".
    Can u guys tell me the reason behing this.
    Thanks & regards.

    Hi,
    Check if you have selected any security level for the WebService or may be it is across the firewall. Probably you need to install the related certificates and have to configure the SSL layer.
    refer
    You need to setup SSL layer for HTTPS endpoint.
    Possible HTTP security levels are (in ascending order):
    HTTP without SSL
    HTTP with SSL (= HTTPS), but without client authentication
    HTTP with SSL (= HTTPS) and with client authentication
    Use transaction STRUST to set up an SAP Web AS ABAP engine as HTTPS server. If not already done, you have to import a certificate generated by a trusted CA identifying the SAP Web AS. In addition, you have to enable the HTTPS port in the ICM (Internet Communication Manager).
    http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ff/7932e4e9c51c4fa596c69e21151c7d/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/13/4a3ad42ae78e4ca256861e078b4160/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/3a/7cddde33ff05cae10000000a128c20/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0a/0a2e0fef6211d3a6510000e835363f/content.htm
    General guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09f3d8e-d478-2910-9eb8-caa6516dd7d9
    Message level security
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
    Thanks
    Swarup

  • Web Service Security not configured on this component.

    Hi Experts,
                           Before configuring the scenario, i went to RWB to check whether the comopnents are in active mode or not.
                                  Integration Engine XID 
                                  Business Process Engine XID 
                                  Mapping Runtime XID 
                                  Adapter Engine XID 
                                  Integration Engines
                          All components are in Green mode  Except Integration Engine, The Integration is in yellow mode
                           and shows the following details.
                         Details for 'Is Web service security available?'
                           Web Service Security not configured on this component.
    Can you give the solution for this.

    Hi,
                      1, While sending idoc from sapR/3 to PI , in r/3 sm58 shows the foll error:
    "No service for system SAPQA,client 200 in integration directory"*
                               Even the Bussiness sytem pointing R/3.
    From your initial post, it appears that you are using XID system and from above error, I believe you are trying to send the IDoc from QA system. R3 dev will communicate to PI dev, so verify the partner profile and ports in your IDoc Header settings.
                         2, When i execute the tcode sm58 in PI   it shows the following error:
                                   "Syntax error in program SAPLSXI_AC_CACHE _REFERESH"
    I am kinda confused how come sm58 tcode can show an error for this program, as sm58 is for checking the transactional RFCs and  SAPLSXI_AC_CACHE_REFERESH is for XI Cache refresh for Alert Category. Might be some one else can explain this.
                         3, WHEN I EXECUTE THE tcode SXI_CACHE
                                             Under the *STATUS OF RUNTIME CACHE
                                                           Unable to refresh cache contents
                                                           Error during last attempt toreferesh cache
                                                             (red colour triangle leading above both)
    Check this SAP Note 764176, might help in your situation.
    Worth reading - http://help.sap.com/saphelp_nw04/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
                        4, Still there is no messages in Message monitoring.
    Obviously because of error # 1, you are unable to send IDocs, how come you expect messages to reach PI ... strange, isn't it
    Hope this helps.
    Regards,
    Neetesh

  • RWB - Integration Engine self test - web service security and proxy

    Hi,
    I am working with a new installation of PI 7.0. In the runtime workbench, under self test for integration engine, there is this error/warning:
    ""Details for 'Is Web service security available?'
    Communication error: Proxy calls are not permitted on sender or receiver side on the IS (client)""
    What exactly is the problem? Is there any additional configuration needed within PI to use proxies? We do not have the cryptographic toolkit installed. Is that nesseccary to work with proxies? We have done several other scenarios with RFC, MAIL, HTTP, etc and they work fine. If anyone else had this problem and managed to fix it, please let me know..
    Thanks,
    Lasya

    You can ignore this error. It is  simply a warning that says message level security has not been configured. Without message security too, you can do proxy communication.
    But, if you want to configure messag level security, go through XI Config guide section 12.4.
    Message was edited by: Jay

  • SOAP Request with Web Service Security

    Hi masters of XI,
    the Oasis standard for web services security saids that exists three levels of security for web services, at higher level is Encryption, middle level is signature and at lower level is authentication with username and password inside the soap envelope.
    I need to do a SOAP Request signed with a X.509 certificate and username and password too in SAP PI 7.0 SP11. I can sign the request with X.509 certificate without problems but i can't authenticate the request with username and password in usernametoken element like saids the Oasis standard
    <wsse:Security>
    <wsse:UsernameToken>
    <wsse:Username>XXXX</wsse:Username>
    <wsse:Password>XXXXXXXXX</wsse:Password>
    </wsse:UsernameToken>
    </wsse:Security>
    How can we send UserNameToken's elements inside SOAP web service envelope
    signing with X.509 certificate also? There are any way to do it in the
    receiver agreement or receiver SOAP adapter?
    thanks.

    Hi,
    thank you very much for your answers.
    I have solved the SSL comunication and i can sign with X.509 certificates. My problem is that in the SOAP envelope of resquest signed only travels the X.509 certificate and I need to send the username security token (wsse:UsernameToken) also.
    <wsse:Security>
    <wsse:UsernameToken>
    <wsse:Username>XXXX</wsse:Username>
    <wsse:Password>XXXXXXXXX</wsse:Password>
    </wsse:UsernameToken>
    </wsse:Security>
    I can't find the solution to do it. The Netweaver documentation says that Netweaver is able to sign SOAP request with X.509 certificates and is able too for using UsernameToken as part of Oasis standard for web service security. In abap stack of NW you can assign a security profile to a web service call for signing the message or authenticate it with username/password inside SOAP envelope, but in java stack of XI i think that there is no way to do it.
    This is my Request:
    <?xml version="1.0" encoding="utf-8"?>
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
      <soapenv:Header>
        <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" soapenv:mustUnderstand="1">
          <wsse:BinarySecurityToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="CertId-71968700">MIIHdTCCBl2gAwIBAgIQOq4nmg5zi4NGsIGjPUZVuTANBgkqhkiG9w0BAQUFADCCAT4xCzAJBgNVBAYTAkVTMTswOQYDVQQKEzJBZ...8d4pAJYk=</wsse:BinarySecurityToken>
          <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#" Id="Signature-104376803">
            <ds:SignedInfo>
              <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
              <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
              <ds:Reference URI="#id-104309952">
                <ds:Transforms>
                  <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
                </ds:Transforms>
                <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
                <ds:DigestValue>R6WE9gs+l496jHCgslgALWswEnE=</ds:DigestValue>
              </ds:Reference>
              <ds:Reference URI="#Timestamp-104310599">
                <ds:Transforms>
                  <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
                </ds:Transforms>
                <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
                <ds:DigestValue>aiCTZ0WwiZQEv8zVmmf8GLu/bYA=</ds:DigestValue>
              </ds:Reference>
            </ds:SignedInfo>
            <ds:SignatureValue>YR9Q5oUA6kFFmPYOIOQPTOgTgapMbkmgdlDM/TZJ2CS8ENAntfsnmpEbpUgOPUVMkgaECog0OKvlADHP0HvJtPdm2NJljZNCCgrk3hlmmtkXkRauVuH5KRiHE5NeWT4+Uspp3ashebu0IuOO66zt4Q=</ds:SignatureValue>
            <ds:KeyInfo Id="KeyId-104377209">
              <wsse:SecurityTokenReference xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="STRId-104377346">
                <wsse:Reference URI="#CertId-71968700" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/>
              </wsse:SecurityTokenReference>
            </ds:KeyInfo>
          </ds:Signature>     
          <wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="Timestamp-104310599">
            <wsu:Created>2008-01-16T21:28:44.081Z</wsu:Created>
            <wsu:Expires>2008-01-16T21:33:44.081Z</wsu:Expires>
          </wsu:Timestamp>
        </wsse:Security>
      </soapenv:Header>
    And this is the request I need:
    <?xml version="1.0" encoding="utf-8"?>
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
      <soapenv:Header>
        <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" soapenv:mustUnderstand="1">
          <wsse:BinarySecurityToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="CertId-71968700">MIIHdTCCBl2gAwIBAgIQOq4nmg5zi4NGsIGjPUZVuTANBgkqhkiG9w0BAQUFADCCAT4xCzAJBgNVBAYTAkVTMTswOQYDVQQKEzJBZ...8d4pAJYk=</wsse:BinarySecurityToken>
          <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#" Id="Signature-104376803">
            <ds:SignedInfo>
              <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
              <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
              <ds:Reference URI="#id-104309952">
                <ds:Transforms>
                  <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
                </ds:Transforms>
                <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
                <ds:DigestValue>R6WE9gs+l496jHCgslgALWswEnE=</ds:DigestValue>
              </ds:Reference>
              <ds:Reference URI="#Timestamp-104310599">
                <ds:Transforms>
                  <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
                </ds:Transforms>
                <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
                <ds:DigestValue>aiCTZ0WwiZQEv8zVmmf8GLu/bYA=</ds:DigestValue>
              </ds:Reference>
            </ds:SignedInfo>
            <ds:SignatureValue>YR9Q5oUA6kFFmPYOIOQPTOgTgapMbkmgdlDM/TZJ2CS8ENAntfsnmpEbpUgOPUVMkgaECog0OKvlADHP0HvJtPdm2NJljZNCCgrk3hlmmtkXkRauVuH5KRiHE5NeWT4+Uspp3ashebu0IuOO66zt4Q=</ds:SignatureValue>
            <ds:KeyInfo Id="KeyId-104377209">
              <wsse:SecurityTokenReference xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="STRId-104377346">
                <wsse:Reference URI="#CertId-71968700" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/>
              </wsse:SecurityTokenReference>
            </ds:KeyInfo>
          </ds:Signature>
    <!-- THIS IS THE PART I NEED -->
    <wsse:UsernameToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="UsernameToken-104312926">
            <wsse:Username>xxxxxxx</wsse:Username>
            <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText"/>
          </wsse:UsernameToken>
    <!--  -->
    <wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="Timestamp-104310599">
            <wsu:Created>2008-01-16T21:28:44.081Z</wsu:Created>
            <wsu:Expires>2008-01-16T21:33:44.081Z</wsu:Expires>
          </wsu:Timestamp>
        </wsse:Security>
      </soapenv:Header>

Maybe you are looking for

  • To invite people is not working

    i want to invite people when making an appointment. this message is what i  get. who can solver this problem?

  • Richfaces fileupload with myfaces 1.1.5. Cant make it work

    Hello , I am a newbie to jsf technologies. I use myfaces 1.1.5 with tomcat 5.5 and richfaces 3.2.0 and trying to use richfaces fileupload component. I use netbeans IDE. When i try to run the project it fails building the project and the error in tomc

  • HT201210 Is there any way I can update my iPod's system so that I can read pdf files?

    I want to download an app where I can read pdf files, but there are no apps for my operating system it seems like.

  • Printing to Acrobat

    As of two days ago, I lost the ability to print from Photoshop. I go to file, and the print option is grayed out. I can still print to Acrobat from other applications. Windows 7, CS5

  • Uninstalling Reader 10.1 on a Mac

    Hi All, I have a new iMAC which is running OS 10.6.8 I wanted to install Adobe Reader so that I could view some information on a website which required the Adobe PDF reader plug in for Safari. I downloaded Adobe Reader 10.1 from Adobe's UK site and r